123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264 |
- From 3e6793632310f9991b75c3095a9795b6a8d1d859 Mon Sep 17 00:00:00 2001
- From: Dave Stevenson <[email protected]>
- Date: Wed, 15 Dec 2021 17:57:45 +0000
- Subject: [PATCH] drm/vc4: Convert vc4_dsi to using a bridge instead of
- encoder.
- Remove the encoder functions, and create a bridge attached to
- this dumb encoder which implements the same functionality.
- As a bridge has state which an encoder doesn't, we need to
- add the state management functions as well.
- As there is no bridge atomic_mode_set, move the initialisation
- code that was in mode_set into _pre_enable.
- The code to actually enable and disable sending video are split
- from the general control into _enable and _disable.
- Signed-off-by: Dave Stevenson <[email protected]>
- ---
- drivers/gpu/drm/vc4/vc4_dsi.c | 124 ++++++++++++++++++++++++----------
- 1 file changed, 90 insertions(+), 34 deletions(-)
- --- a/drivers/gpu/drm/vc4/vc4_dsi.c
- +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
- @@ -554,6 +554,7 @@ struct vc4_dsi {
- struct mipi_dsi_host dsi_host;
- struct drm_encoder *encoder;
- struct drm_bridge *out_bridge;
- + struct drm_bridge bridge;
-
- void __iomem *regs;
-
- @@ -655,6 +656,12 @@ to_vc4_dsi_encoder(struct drm_encoder *e
- return container_of(encoder, struct vc4_dsi_encoder, base.base);
- }
-
- +static inline struct vc4_dsi *
- +bridge_to_vc4_dsi(struct drm_bridge *bridge)
- +{
- + return container_of(bridge, struct vc4_dsi, bridge);
- +}
- +
- static const struct debugfs_reg32 dsi0_regs[] = {
- VC4_REG32(DSI0_CTRL),
- VC4_REG32(DSI0_STAT),
- @@ -792,11 +799,21 @@ dsi_esc_timing(u32 ns)
- return DIV_ROUND_UP(ns, ESC_TIME_NS);
- }
-
- -static void vc4_dsi_encoder_disable(struct drm_encoder *encoder,
- - struct drm_atomic_state *state)
- +static void vc4_dsi_bridge_disable(struct drm_bridge *bridge,
- + struct drm_bridge_state *state)
- +{
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- + u32 disp0_ctrl;
- +
- + disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
- + disp0_ctrl &= ~DSI_DISP0_ENABLE;
- + DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
- +}
- +
- +static void vc4_dsi_bridge_post_disable(struct drm_bridge *bridge,
- + struct drm_bridge_state *state)
- {
- - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- - struct vc4_dsi *dsi = vc4_encoder->dsi;
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- struct device *dev = &dsi->pdev->dev;
-
- vc4_dsi_ulps(dsi, true);
- @@ -821,12 +838,11 @@ static void vc4_dsi_encoder_disable(stru
- * higher-than-expected clock rate to the panel, but that's what the
- * firmware does too.
- */
- -static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
- - const struct drm_display_mode *mode,
- - struct drm_display_mode *adjusted_mode)
- +static bool vc4_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
- + const struct drm_display_mode *mode,
- + struct drm_display_mode *adjusted_mode)
- {
- - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- - struct vc4_dsi *dsi = vc4_encoder->dsi;
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock);
- unsigned long parent_rate = clk_get_rate(phy_parent);
- unsigned long pixel_clock_hz = mode->clock * 1000;
- @@ -858,16 +874,18 @@ static bool vc4_dsi_encoder_mode_fixup(s
- return true;
- }
-
- -static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder,
- - struct drm_crtc_state *crtc_state,
- - struct drm_connector_state *conn_state)
- +static void vc4_dsi_bridge_pre_enable(struct drm_bridge *bridge,
- + struct drm_bridge_state *old_state)
- {
- - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- - struct vc4_dsi *dsi = vc4_encoder->dsi;
- + struct drm_atomic_state *state = old_state->base.state;
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- + const struct drm_crtc_state *crtc_state;
- struct device *dev = &dsi->pdev->dev;
- const struct drm_display_mode *mode;
- + struct drm_connector *connector;
- bool debug_dump_regs = false;
- unsigned long hs_clock;
- + struct drm_crtc *crtc;
- u32 ui_ns;
- /* Minimum LP state duration in escape clock cycles. */
- u32 lpx = dsi_esc_timing(60);
- @@ -888,6 +906,14 @@ static void vc4_dsi_encoder_mode_set(str
- drm_print_regset32(&p, &dsi->regset);
- }
-
- + /*
- + * Retrieve the CRTC adjusted mode. This requires a little dance to go
- + * from the bridge to the encoder, to the connector and to the CRTC.
- + */
- + connector = drm_atomic_get_new_connector_for_encoder(state,
- + bridge->encoder);
- + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
- + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
- mode = &crtc_state->adjusted_mode;
-
- pixel_clock_hz = mode->clock * 1000;
- @@ -1102,14 +1128,6 @@ static void vc4_dsi_encoder_mode_set(str
- ~DSI_PORT_BIT(PHY_AFEC0_RESET));
-
- vc4_dsi_ulps(dsi, false);
- -}
- -
- -static void vc4_dsi_encoder_enable(struct drm_encoder *encoder,
- - struct drm_atomic_state *state)
- -{
- - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
- - struct vc4_dsi *dsi = vc4_encoder->dsi;
- - bool debug_dump_regs = false;
-
- if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
- DSI_PORT_WRITE(DISP0_CTRL,
- @@ -1118,13 +1136,23 @@ static void vc4_dsi_encoder_enable(struc
- VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
- VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
- DSI_DISP0_LP_STOP_CTRL) |
- - DSI_DISP0_ST_END |
- - DSI_DISP0_ENABLE);
- + DSI_DISP0_ST_END);
- } else {
- DSI_PORT_WRITE(DISP0_CTRL,
- - DSI_DISP0_COMMAND_MODE |
- - DSI_DISP0_ENABLE);
- + DSI_DISP0_COMMAND_MODE);
- }
- +}
- +
- +static void vc4_dsi_bridge_enable(struct drm_bridge *bridge,
- + struct drm_bridge_state *old_state)
- +{
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- + bool debug_dump_regs = false;
- + u32 disp0_ctrl;
- +
- + disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
- + disp0_ctrl |= DSI_DISP0_ENABLE;
- + DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
-
- if (debug_dump_regs) {
- struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
- @@ -1133,6 +1161,16 @@ static void vc4_dsi_encoder_enable(struc
- }
- }
-
- +static int vc4_dsi_bridge_attach(struct drm_bridge *bridge,
- + enum drm_bridge_attach_flags flags)
- +{
- + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
- +
- + /* Attach the panel or bridge to the dsi bridge */
- + return drm_bridge_attach(bridge->encoder, dsi->out_bridge,
- + &dsi->bridge, flags);
- +}
- +
- static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
- const struct mipi_dsi_msg *msg)
- {
- @@ -1309,6 +1347,7 @@ static int vc4_dsi_host_attach(struct mi
- struct mipi_dsi_device *device)
- {
- struct vc4_dsi *dsi = host_to_dsi(host);
- + int ret;
-
- dsi->lanes = device->lanes;
- dsi->channel = device->channel;
- @@ -1343,7 +1382,15 @@ static int vc4_dsi_host_attach(struct mi
- return 0;
- }
-
- - return component_add(&dsi->pdev->dev, &vc4_dsi_ops);
- + drm_bridge_add(&dsi->bridge);
- +
- + ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops);
- + if (ret) {
- + drm_bridge_remove(&dsi->bridge);
- + return ret;
- + }
- +
- + return 0;
- }
-
- static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
- @@ -1352,6 +1399,7 @@ static int vc4_dsi_host_detach(struct mi
- struct vc4_dsi *dsi = host_to_dsi(host);
-
- component_del(&dsi->pdev->dev, &vc4_dsi_ops);
- + drm_bridge_remove(&dsi->bridge);
- return 0;
- }
-
- @@ -1361,11 +1409,16 @@ static const struct mipi_dsi_host_ops vc
- .transfer = vc4_dsi_host_transfer,
- };
-
- -static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = {
- - .atomic_disable = vc4_dsi_encoder_disable,
- - .atomic_enable = vc4_dsi_encoder_enable,
- - .mode_fixup = vc4_dsi_encoder_mode_fixup,
- - .atomic_mode_set = vc4_dsi_encoder_mode_set,
- +static const struct drm_bridge_funcs vc4_dsi_bridge_funcs = {
- + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
- + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
- + .atomic_reset = drm_atomic_helper_bridge_reset,
- + .atomic_pre_enable = vc4_dsi_bridge_pre_enable,
- + .atomic_enable = vc4_dsi_bridge_enable,
- + .atomic_disable = vc4_dsi_bridge_disable,
- + .atomic_post_disable = vc4_dsi_bridge_post_disable,
- + .attach = vc4_dsi_bridge_attach,
- + .mode_fixup = vc4_dsi_bridge_mode_fixup,
- };
-
- static const struct vc4_dsi_variant bcm2711_dsi1_variant = {
- @@ -1692,9 +1745,8 @@ static int vc4_dsi_bind(struct device *d
- return ret;
-
- drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI);
- - drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
-
- - ret = drm_bridge_attach(dsi->encoder, dsi->out_bridge, NULL, 0);
- + ret = drm_bridge_attach(dsi->encoder, &dsi->bridge, NULL, 0);
- if (ret)
- return ret;
-
- @@ -1730,6 +1782,10 @@ static int vc4_dsi_dev_probe(struct plat
- return -ENOMEM;
- dev_set_drvdata(dev, dsi);
-
- + dsi->bridge.funcs = &vc4_dsi_bridge_funcs;
- + dsi->bridge.of_node = dev->of_node;
- + dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
- +
- dsi->pdev = pdev;
- dsi->dsi_host.ops = &vc4_dsi_host_ops;
- dsi->dsi_host.dev = dev;
|