| 123456789101112131415161718192021222324252627282930313233 |
- From ac84397efb3b3868c71c10ad7521161773228a17 Mon Sep 17 00:00:00 2001
- From: OpenWrt community <[email protected]>
- Date: Wed, 13 Jul 2022 13:41:44 +0200
- Subject: [PATCH] mtd/nand: add MediaTek NAND bad block managment table
- ---
- drivers/mtd/nand/Kconfig | 4 ++++
- drivers/mtd/nand/Makefile | 1 +
- 2 files changed, 5 insertions(+)
- --- a/drivers/mtd/nand/Kconfig
- +++ b/drivers/mtd/nand/Kconfig
- @@ -46,6 +46,10 @@ config MTD_NAND_ECC_SW_BCH
- ECC codes. They are used with NAND devices requiring more than 1 bit
- of error correction.
-
- +config MTD_NAND_MTK_BMT
- + bool "Support MediaTek NAND Bad-block Management Table"
- + default n
- +
- config MTD_NAND_ECC_MXIC
- bool "Macronix external hardware ECC engine"
- depends on HAS_IOMEM
- --- a/drivers/mtd/nand/Makefile
- +++ b/drivers/mtd/nand/Makefile
- @@ -3,6 +3,7 @@
- nandcore-objs := core.o bbt.o
- obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
- obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
- +obj-$(CONFIG_MTD_NAND_MTK_BMT) += mtk_bmt.o mtk_bmt_v2.o mtk_bmt_bbt.o mtk_bmt_nmbm.o
-
- obj-y += onenand/
- obj-y += raw/
|
