openwrt/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-ap3935.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qcom-ipq8064-v2.0.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	model = "Extreme Networks AP3935";
	compatible = "extreme,ap3935", "qcom,ipq8064";

	memory@0 {
		reg = <0x41400000 0x3ec00000>;
		device_type = "memory";
	};

	aliases {
		serial0 = &gsbi7_serial;
		serial1 = &gsbi2_serial;
		mdio-gpio0 = &mdio0;
		ethernet0 = &gmac0;
		ethernet1 = &gmac2;

		led-boot = &led_power_green;
		led-failsafe = &led_power_orange;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
	};

	chosen {
		stdout-path = "serial0:115200n8";
		bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0";
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		led_power_green: power_green {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
		};

		led_power_orange: power_orange { 
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_ORANGE>;
			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
		};

		led_wlan2g_green {
			label = "green:wlan2g";
			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		led_wlan5g_green {
			label = "green:wlan5g";
			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		led_lan1_green {
			label = "green:lan1";
			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
		};

		led_lan1_orange {
			label = "orange:lan1";
			gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
		};

		led_lan2_green {
			label = "green:lan2";
			gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
		};

		led_lan2_orange {
			label = "orange:lan2";
			gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
		};
	};
};


&qcom_pinmux {
	spi_pins: spi_pins {
		mux {
			pins = "gpio18", "gpio19";
			function = "gsbi5";
			drive-strength = <10>;
			bias-pull-down;
		};

		clk {
			pins = "gpio21";
			function = "gsbi5";
			drive-strength = <12>;
			bias-pull-down;
		};

		cs {
			pins = "gpio20";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
		};
	};

	led_pins: led_pins {
		mux {
			pins = "gpio22", "gpio23", "gpio24", "gpio25",
				    "gpio26", "gpio27", "gpio28", "gpio29";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
		};
	};

	button_pins: button_pins {
		mux {
			pins = "gpio56";
			function = "gpio";
			bias-pull-up;
		};
	};
};

&gsbi2 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	gsbi2_serial: serial@12490000 {
		status = "okay";
	};
};

&gsbi4 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	serial@16340000 {
		status = "disabled";
	};
};

&gsbi7 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	gsbi7_serial: serial@16640000 {
		status = "okay";
	};
};

&gsbi5 {
	qcom,mode = <GSBI_PROT_SPI>;
	status = "okay";

	spi4: spi@1a280000 {
		status = "okay";
		spi-max-frequency = <50000000>;

		pinctrl-0 = <&spi_pins>;
		pinctrl-names = "default";

		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;

		flash@0 {
			compatible = "jedec,spi-nor";
			spi-max-frequency = <50000000>;
			reg = <0>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				cfg1@2a0000 {
					compatible = "u-boot,env-redundant-bool";
					label = "CFG1";
					reg = <0x2a0000 0x0010000>;

					ethaddr: ethaddr {
						#nvmem-cell-cells = <1>;
					};
				};

				bootpri@2b0000 {
					label = "BootPRI";
					reg = <0x2b0000 0x0080000>;
				};

				cfg2@330000 {
					label = "CFG2";
					reg = <0x330000 0x0010000>;
				};

				fs@340000 {
					label = "FS";
					reg = <0x340000 0x0080000>;
				};

				priimg@3c0000 {
					label = "PriImg";
					reg = <0x3c0000 0x0e10000>;
				};

				secimg@11d0000 {
					label = "SecImg";
					reg = <0x11d0000 0x0e10000>;
				};
			};
		};
	};
};

&pcie0 {
	status = "okay";

	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;

	bridge@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			compatible = "qcom,ath10k";
			status = "okay";
			reg = <0x00010000 0 0 0 0>;
		};
	};
};

&pcie1 {
	status = "okay";

	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;

	bridge@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			compatible = "qcom,ath10k";
			status = "okay";
			reg = <0x00010000 0 0 0 0>;
		};
	};
};

&nand {
	status = "okay";

	pinctrl-0 = <&nand_pins>;
	pinctrl-names = "default";

	nand@0 {
		compatible = "qcom,nandcs";

		reg = <0>;

		nand-ecc-strength = <8>;
		nand-bus-width = <8>;
		nand-ecc-step-size = <512>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;
			
			ubi@0 {
				label = "ubi";
				reg = <0x0000000 0x20000000>;
			};
		};
	};
};

&soc {
	mdio1: mdio {
		compatible = "virtual,mdio-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		status = "okay";

		pinctrl-0 = <&mdio0_pins>;
		pinctrl-names = "default";

		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;

		phy1: ethernet-phy@1 {
			reg = <1>;
		};

		phy2: ethernet-phy@2 {
			reg = <2>;
		};
	};
};

&gmac0 {
	status = "okay";

	qcom,id = <0>;
	mdiobus = <&mdio1>;

	phy-mode = "rgmii";
	phy-handle = <&phy1>;

	nvmem-cells = <&ethaddr 0>;
	nvmem-cell-names = "mac-address";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";

	qcom,id = <2>;
	mdiobus = <&mdio1>;

	phy-mode = "sgmii";
	phy-handle = <&phy2>;

	nvmem-cells = <&ethaddr 1>;
	nvmem-cell-names = "mac-address";
};

&adm_dma {
	status = "okay";
};