| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 |
- From e6c32770ef83f3e8cc057f3920b1c06aa9d1c9c2 Mon Sep 17 00:00:00 2001
- From: Chukun Pan <[email protected]>
- Date: Sun, 3 Dec 2023 23:39:14 +0800
- Subject: [PATCH] arm64: dts: qcom: ipq6018: Add remaining QUP UART node
- Add node to support all the QUP UART node controller inside of IPQ6018.
- Some routers use these bus to connect Bluetooth chips.
- Signed-off-by: Chukun Pan <[email protected]>
- Link: https://lore.kernel.org/r/[email protected]
- Signed-off-by: Bjorn Andersson <[email protected]>
- ---
- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 50 +++++++++++++++++++++++++++
- 1 file changed, 50 insertions(+)
- --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
- +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
- @@ -459,6 +459,26 @@
- qcom,ee = <0>;
- };
-
- + blsp1_uart1: serial@78af000 {
- + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- + reg = <0x0 0x78af000 0x0 0x200>;
- + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
- + <&gcc GCC_BLSP1_AHB_CLK>;
- + clock-names = "core", "iface";
- + status = "disabled";
- + };
- +
- + blsp1_uart2: serial@78b0000 {
- + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- + reg = <0x0 0x78b0000 0x0 0x200>;
- + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- + <&gcc GCC_BLSP1_AHB_CLK>;
- + clock-names = "core", "iface";
- + status = "disabled";
- + };
- +
- blsp1_uart3: serial@78b1000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x0 0x078b1000 0x0 0x200>;
- @@ -467,6 +487,36 @@
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- + };
- +
- + blsp1_uart4: serial@78b2000 {
- + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- + reg = <0x0 0x078b2000 0x0 0x200>;
- + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
- + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
- + <&gcc GCC_BLSP1_AHB_CLK>;
- + clock-names = "core", "iface";
- + status = "disabled";
- + };
- +
- + blsp1_uart5: serial@78b3000 {
- + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- + reg = <0x0 0x78b3000 0x0 0x200>;
- + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
- + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
- + <&gcc GCC_BLSP1_AHB_CLK>;
- + clock-names = "core", "iface";
- + status = "disabled";
- + };
- +
- + blsp1_uart6: serial@78b4000 {
- + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- + reg = <0x0 0x078b4000 0x0 0x200>;
- + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
- + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
- + <&gcc GCC_BLSP1_AHB_CLK>;
- + clock-names = "core", "iface";
- + status = "disabled";
- };
-
- blsp1_spi1: spi@78b5000 {
|
