openwrt/target/linux/generic/backport-6.6/713-v6.9-03-net-phy-qcom-deatch-qca83xx-PHY-driver-from-at803x.patch

From 2e45d404d99d43bb7127b74b5dea8818df64996c Mon Sep 17 00:00:00 2001
From: Christian Marangi <[email protected]>
Date: Mon, 29 Jan 2024 15:15:21 +0100
Subject: [PATCH 3/5] net: phy: qcom: deatch qca83xx PHY driver from at803x

Deatch qca83xx PHY driver from at803x.

The QCA83xx PHYs implement specific function and doesn't use generic
at803x so it can be detached from the driver and moved to a dedicated
one.

Probe function and priv struct is reimplemented to allocate and use
only the qca83xx specific data. Unused data from at803x PHY driver
are dropped from at803x priv struct.

This is to make slimmer PHY drivers instead of including lots of bloat
that would never be used in specific SoC.

A new Kconfig flag QCA83XX_PHY is introduced to compile the new
introduced PHY driver.

As the Kconfig name starts with Qualcomm the same order is kept.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
---
 drivers/net/phy/qcom/Kconfig   |  11 +-
 drivers/net/phy/qcom/Makefile  |   1 +
 drivers/net/phy/qcom/at803x.c  | 235 ----------------------------
 drivers/net/phy/qcom/qca83xx.c | 275 +++++++++++++++++++++++++++++++++
 4 files changed, 284 insertions(+), 238 deletions(-)
 create mode 100644 drivers/net/phy/qcom/qca83xx.c

--- a/drivers/net/phy/qcom/Kconfig
+++ b/drivers/net/phy/qcom/Kconfig
@@ -3,9 +3,14 @@ config QCOM_NET_PHYLIB
 	tristate
 
 config AT803X_PHY
-	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
+	tristate "Qualcomm Atheros AR803X PHYs"
 	select QCOM_NET_PHYLIB
 	depends on REGULATOR
 	help
-	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
-	  QCA8337(Internal qca8k PHY) model
+	  Currently supports the AR8030, AR8031, AR8033, AR8035 model
+
+config QCA83XX_PHY
+	tristate "Qualcomm Atheros QCA833x PHYs"
+	select QCOM_NET_PHYLIB
+	help
+	  Currently supports the internal QCA8337(Internal qca8k PHY) model
--- a/drivers/net/phy/qcom/Makefile
+++ b/drivers/net/phy/qcom/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
+obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -102,17 +102,10 @@
 #define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
 #define AT803X_PSSR_MR_AN_COMPLETE		0x0200
 
-#define AT803X_DEBUG_REG_3C			0x3C
-
-#define AT803X_DEBUG_REG_GREEN			0x3D
-#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
-
 #define AT803X_DEBUG_REG_1F			0x1F
 #define AT803X_DEBUG_PLL_ON			BIT(2)
 #define AT803X_DEBUG_RGMII_1V8			BIT(3)
 
-#define MDIO_AZ_DEBUG				0x800D
-
 /* AT803x supports either the XTAL input pad, an internal PLL or the
  * DSP as clock reference for the clock output pad. The XTAL reference
  * is only used for 25 MHz output, all other frequencies need the PLL.
@@ -163,13 +156,7 @@
 
 #define QCA8081_PHY_ID				0x004dd101
 
-#define QCA8327_A_PHY_ID			0x004dd033
-#define QCA8327_B_PHY_ID			0x004dd034
-#define QCA8337_PHY_ID				0x004dd036
 #define QCA9561_PHY_ID				0x004dd042
-#define QCA8K_PHY_ID_MASK			0xffffffff
-
-#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
 
 #define AT803X_PAGE_FIBER			0
 #define AT803X_PAGE_COPPER			1
@@ -379,12 +366,6 @@ MODULE_DESCRIPTION("Qualcomm Atheros AR8
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
 
-static struct at803x_hw_stat qca83xx_hw_stats[] = {
-	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
-	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-};
-
 struct at803x_ss_mask {
 	u16 speed_mask;
 	u8 speed_shift;
@@ -400,7 +381,6 @@ struct at803x_priv {
 	bool is_1000basex;
 	struct regulator_dev *vddio_rdev;
 	struct regulator_dev *vddh_rdev;
-	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
 	int led_polarity_mode;
 };
 
@@ -564,53 +544,6 @@ static void at803x_get_wol(struct phy_de
 		wol->wolopts |= WAKE_MAGIC;
 }
 
-static int qca83xx_get_sset_count(struct phy_device *phydev)
-{
-	return ARRAY_SIZE(qca83xx_hw_stats);
-}
-
-static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
-		strscpy(data + i * ETH_GSTRING_LEN,
-			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
-	}
-}
-
-static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
-{
-	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
-	struct at803x_priv *priv = phydev->priv;
-	int val;
-	u64 ret;
-
-	if (stat.access_type == MMD)
-		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
-	else
-		val = phy_read(phydev, stat.reg);
-
-	if (val < 0) {
-		ret = U64_MAX;
-	} else {
-		val = val & stat.mask;
-		priv->stats[i] += val;
-		ret = priv->stats[i];
-	}
-
-	return ret;
-}
-
-static void qca83xx_get_stats(struct phy_device *phydev,
-			      struct ethtool_stats *stats, u64 *data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
-		data[i] = qca83xx_get_stat(phydev, i);
-}
-
 static int at803x_suspend(struct phy_device *phydev)
 {
 	int value;
@@ -1707,124 +1640,6 @@ static int at8035_probe(struct phy_devic
 	return at8035_parse_dt(phydev);
 }
 
-static int qca83xx_config_init(struct phy_device *phydev)
-{
-	u8 switch_revision;
-
-	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
-
-	switch (switch_revision) {
-	case 1:
-		/* For 100M waveform */
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
-		/* Turn on Gigabit clock */
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
-		break;
-
-	case 2:
-		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
-		fallthrough;
-	case 4:
-		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
-		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
-		break;
-	}
-
-	/* Following original QCA sourcecode set port to prefer master */
-	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-
-	return 0;
-}
-
-static int qca8327_config_init(struct phy_device *phydev)
-{
-	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
-	 * Disable on init and enable only with 100m speed following
-	 * qca original source code.
-	 */
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-
-	return qca83xx_config_init(phydev);
-}
-
-static void qca83xx_link_change_notify(struct phy_device *phydev)
-{
-	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
-	if (phydev->state == PHY_RUNNING) {
-		if (phydev->speed == SPEED_100)
-			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-					      QCA8327_DEBUG_MANU_CTRL_EN,
-					      QCA8327_DEBUG_MANU_CTRL_EN);
-	} else {
-		/* Reset DAC Amplitude adjustment */
-		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-	}
-}
-
-static int qca83xx_resume(struct phy_device *phydev)
-{
-	int ret, val;
-
-	/* Skip reset if not suspended */
-	if (!phydev->suspended)
-		return 0;
-
-	/* Reinit the port, reset values set by suspend */
-	qca83xx_config_init(phydev);
-
-	/* Reset the port on port resume */
-	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-
-	/* On resume from suspend the switch execute a reset and
-	 * restart auto-negotiation. Wait for reset to complete.
-	 */
-	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
-				    50000, 600000, true);
-	if (ret)
-		return ret;
-
-	usleep_range(1000, 2000);
-
-	return 0;
-}
-
-static int qca83xx_suspend(struct phy_device *phydev)
-{
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
-			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
-
-	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
-			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
-
-	return 0;
-}
-
-static int qca8337_suspend(struct phy_device *phydev)
-{
-	/* Only QCA8337 support actual suspend. */
-	genphy_suspend(phydev);
-
-	return qca83xx_suspend(phydev);
-}
-
-static int qca8327_suspend(struct phy_device *phydev)
-{
-	u16 mask = 0;
-
-	/* QCA8327 cause port unreliability when phy suspend
-	 * is set.
-	 */
-	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-	phy_modify(phydev, MII_BMCR, mask, 0);
-
-	return qca83xx_suspend(phydev);
-}
-
 static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
 {
 	int ret;
@@ -2599,53 +2414,6 @@ static struct phy_driver at803x_driver[]
 	.soft_reset		= genphy_soft_reset,
 	.config_aneg		= at803x_config_aneg,
 }, {
-	/* QCA8337 */
-	.phy_id			= QCA8337_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8337 internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca83xx_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8337_suspend,
-	.resume			= qca83xx_resume,
-}, {
-	/* QCA8327-A from switch QCA8327-AL1A */
-	.phy_id			= QCA8327_A_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8327-A internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.link_change_notify	= qca83xx_link_change_notify,
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca8327_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8327_suspend,
-	.resume			= qca83xx_resume,
-}, {
-	/* QCA8327-B from switch QCA8327-BL1A */
-	.phy_id			= QCA8327_B_PHY_ID,
-	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-	.name			= "Qualcomm Atheros 8327-B internal PHY",
-	/* PHY_GBIT_FEATURES */
-	.link_change_notify	= qca83xx_link_change_notify,
-	.probe			= at803x_probe,
-	.flags			= PHY_IS_INTERNAL,
-	.config_init		= qca8327_config_init,
-	.soft_reset		= genphy_soft_reset,
-	.get_sset_count		= qca83xx_get_sset_count,
-	.get_strings		= qca83xx_get_strings,
-	.get_stats		= qca83xx_get_stats,
-	.suspend		= qca8327_suspend,
-	.resume			= qca83xx_resume,
-}, {
 	/* Qualcomm QCA8081 */
 	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
 	.name			= "Qualcomm QCA8081",
@@ -2683,9 +2451,6 @@ static struct mdio_device_id __maybe_unu
 	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
 	{ }
--- /dev/null
+++ b/drivers/net/phy/qcom/qca83xx.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include "qcom.h"
+
+#define AT803X_DEBUG_REG_3C			0x3C
+
+#define AT803X_DEBUG_REG_GREEN			0x3D
+#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
+
+#define MDIO_AZ_DEBUG				0x800D
+
+#define QCA8327_A_PHY_ID			0x004dd033
+#define QCA8327_B_PHY_ID			0x004dd034
+#define QCA8337_PHY_ID				0x004dd036
+#define QCA8K_PHY_ID_MASK			0xffffffff
+
+#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
+
+static struct at803x_hw_stat qca83xx_hw_stats[] = {
+	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
+	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
+	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
+};
+
+struct qca83xx_priv {
+	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
+};
+
+MODULE_DESCRIPTION("Qualcomm Atheros QCA83XX PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_AUTHOR("Christian Marangi <[email protected]>");
+MODULE_LICENSE("GPL");
+
+static int qca83xx_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(qca83xx_hw_stats);
+}
+
+static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
+		strscpy(data + i * ETH_GSTRING_LEN,
+			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
+{
+	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
+	struct qca83xx_priv *priv = phydev->priv;
+	int val;
+	u64 ret;
+
+	if (stat.access_type == MMD)
+		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
+	else
+		val = phy_read(phydev, stat.reg);
+
+	if (val < 0) {
+		ret = U64_MAX;
+	} else {
+		val = val & stat.mask;
+		priv->stats[i] += val;
+		ret = priv->stats[i];
+	}
+
+	return ret;
+}
+
+static void qca83xx_get_stats(struct phy_device *phydev,
+			      struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
+		data[i] = qca83xx_get_stat(phydev, i);
+}
+
+static int qca83xx_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca83xx_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int qca83xx_config_init(struct phy_device *phydev)
+{
+	u8 switch_revision;
+
+	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
+
+	switch (switch_revision) {
+	case 1:
+		/* For 100M waveform */
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
+		/* Turn on Gigabit clock */
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
+		break;
+
+	case 2:
+		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
+		fallthrough;
+	case 4:
+		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
+		break;
+	}
+
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
+	return 0;
+}
+
+static int qca8327_config_init(struct phy_device *phydev)
+{
+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
+	 * Disable on init and enable only with 100m speed following
+	 * qca original source code.
+	 */
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+
+	return qca83xx_config_init(phydev);
+}
+
+static void qca83xx_link_change_notify(struct phy_device *phydev)
+{
+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
+	if (phydev->state == PHY_RUNNING) {
+		if (phydev->speed == SPEED_100)
+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+					      QCA8327_DEBUG_MANU_CTRL_EN,
+					      QCA8327_DEBUG_MANU_CTRL_EN);
+	} else {
+		/* Reset DAC Amplitude adjustment */
+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
+	}
+}
+
+static int qca83xx_resume(struct phy_device *phydev)
+{
+	int ret, val;
+
+	/* Skip reset if not suspended */
+	if (!phydev->suspended)
+		return 0;
+
+	/* Reinit the port, reset values set by suspend */
+	qca83xx_config_init(phydev);
+
+	/* Reset the port on port resume */
+	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
+
+	/* On resume from suspend the switch execute a reset and
+	 * restart auto-negotiation. Wait for reset to complete.
+	 */
+	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
+				    50000, 600000, true);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static int qca83xx_suspend(struct phy_device *phydev)
+{
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
+			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
+
+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
+			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
+			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
+
+	return 0;
+}
+
+static int qca8337_suspend(struct phy_device *phydev)
+{
+	/* Only QCA8337 support actual suspend. */
+	genphy_suspend(phydev);
+
+	return qca83xx_suspend(phydev);
+}
+
+static int qca8327_suspend(struct phy_device *phydev)
+{
+	u16 mask = 0;
+
+	/* QCA8327 cause port unreliability when phy suspend
+	 * is set.
+	 */
+	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
+	phy_modify(phydev, MII_BMCR, mask, 0);
+
+	return qca83xx_suspend(phydev);
+}
+
+static struct phy_driver qca83xx_driver[] = {
+{
+	/* QCA8337 */
+	.phy_id			= QCA8337_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8337 internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca83xx_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8337_suspend,
+	.resume			= qca83xx_resume,
+}, {
+	/* QCA8327-A from switch QCA8327-AL1A */
+	.phy_id			= QCA8327_A_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-A internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca8327_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8327_suspend,
+	.resume			= qca83xx_resume,
+}, {
+	/* QCA8327-B from switch QCA8327-BL1A */
+	.phy_id			= QCA8327_B_PHY_ID,
+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
+	.name			= "Qualcomm Atheros 8327-B internal PHY",
+	/* PHY_GBIT_FEATURES */
+	.link_change_notify	= qca83xx_link_change_notify,
+	.probe			= qca83xx_probe,
+	.flags			= PHY_IS_INTERNAL,
+	.config_init		= qca8327_config_init,
+	.soft_reset		= genphy_soft_reset,
+	.get_sset_count		= qca83xx_get_sset_count,
+	.get_strings		= qca83xx_get_strings,
+	.get_stats		= qca83xx_get_stats,
+	.suspend		= qca8327_suspend,
+	.resume			= qca83xx_resume,
+}, };
+
+module_phy_driver(qca83xx_driver);
+
+static struct mdio_device_id __maybe_unused qca83xx_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, qca83xx_tbl);