| 1234567891011121314151617181920212223242526272829303132333435363738 |
- --- a/arch/mips/ath79/machtypes.h
- +++ b/arch/mips/ath79/machtypes.h
- @@ -120,6 +120,7 @@ enum ath79_mach_type {
- ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
- ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
- ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
- + ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
- ATH79_MACH_WP543, /* Compex WP543 */
- ATH79_MACH_WPE72, /* Compex WPE72 */
- ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
- --- a/arch/mips/ath79/Kconfig
- +++ b/arch/mips/ath79/Kconfig
- @@ -408,6 +408,15 @@ config ATH79_MACH_WNR2000
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
- +config ATH79_MACH_WNR2000_V3
- + bool "NETGEAR WNR2000 V3 board support"
- + select SOC_AR724X
- + select ATH79_DEV_AP9X_PCI if PCI
- + select ATH79_DEV_ETH
- + select ATH79_DEV_GPIO_BUTTONS
- + select ATH79_DEV_LEDS_GPIO
- + select ATH79_DEV_M25P80
- +
- config ATH79_MACH_OM2P
- bool "OpenMesh OM2P board support"
- select SOC_AR724X
- --- a/arch/mips/ath79/Makefile
- +++ b/arch/mips/ath79/Makefile
- @@ -101,6 +101,7 @@ obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) +=
- obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
- obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
- obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
- +obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
- obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
- obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
- obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
|
