HW550-3G.dts 1.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114
  1. /dts-v1/;
  2. /include/ "rt3050.dtsi"
  3. / {
  4. compatible = "HW550-3G", "ralink,rt3052-soc";
  5. model = "Aztech HW550-3G";
  6. palmbus@10000000 {
  7. sysc@0 {
  8. ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
  9. ralink,gpiomux = "mdio";
  10. ralink,uartmux = "gpio";
  11. ralink,wdtmux = <1>;
  12. };
  13. gpio0: gpio@600 {
  14. status = "okay";
  15. };
  16. };
  17. cfi@1f000000 {
  18. compatible = "cfi-flash";
  19. reg = <0x1f000000 0x800000>;
  20. bank-width = <2>;
  21. device-width = <2>;
  22. #address-cells = <1>;
  23. #size-cells = <1>;
  24. partition@0 {
  25. label = "u-boot";
  26. reg = <0x0 0x30000>;
  27. read-only;
  28. };
  29. partition@30000 {
  30. label = "u-boot-env";
  31. reg = <0x30000 0x10000>;
  32. read-only;
  33. };
  34. factory: partition@40000 {
  35. label = "factory";
  36. reg = <0x40000 0x10000>;
  37. read-only;
  38. };
  39. partition@50000 {
  40. label = "firmware";
  41. reg = <0x50000 0x7b0000>;
  42. };
  43. };
  44. ethernet@10100000 {
  45. status = "okay";
  46. };
  47. esw@10110000 {
  48. status = "okay";
  49. ralink,portmap = <0x3e>;
  50. };
  51. gpio-leds {
  52. compatible = "gpio-leds";
  53. usb {
  54. label = "hw550-3g:green:usb";
  55. gpios = <&gpio0 8 1>;
  56. };
  57. 3g {
  58. label = "hw550-3g:green:3g";
  59. gpios = <&gpio0 11 1>;
  60. };
  61. status {
  62. label = "hw550-3g:green:status";
  63. gpios = <&gpio0 12 1>;
  64. };
  65. wps {
  66. label = "hw550-3g:green:wps";
  67. gpios = <&gpio0 14 1>;
  68. };
  69. };
  70. gpio-keys-polled {
  71. compatible = "gpio-keys-polled";
  72. #address-cells = <1>;
  73. #size-cells = <0>;
  74. poll-interval = <20>;
  75. reset {
  76. label = "reset";
  77. gpios = <&gpio0 10 1>;
  78. linux,code = <0x198>;
  79. };
  80. connect {
  81. label = "connect";
  82. gpios = <&gpio0 7 1>;
  83. linux,code = <0xda>;
  84. };
  85. wps {
  86. label = "wps";
  87. gpios = <&gpio0 0 1>;
  88. linux,code = <0x211>;
  89. };
  90. };
  91. wmac@10180000 {
  92. status = "okay";
  93. };
  94. otg@101c0000 {
  95. status = "okay";
  96. };
  97. };