WR512-3GN-4M.dts 1.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112
  1. /dts-v1/;
  2. /include/ "rt3050.dtsi"
  3. / {
  4. compatible = "WR512-3GN", "ralink,rt3052-soc";
  5. model = "WR512-3GN-like router";
  6. palmbus@10000000 {
  7. sysc@0 {
  8. ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
  9. ralink,gpiomux = "mdio";
  10. ralink,uartmux = "gpio";
  11. ralink,wdtmux = <1>;
  12. };
  13. gpio0: gpio@600 {
  14. status = "okay";
  15. };
  16. };
  17. cfi@1f000000 {
  18. compatible = "cfi-flash";
  19. reg = <0x1f000000 0x800000>;
  20. bank-width = <2>;
  21. device-width = <2>;
  22. #address-cells = <1>;
  23. #size-cells = <1>;
  24. partition@0 {
  25. label = "u-boot";
  26. reg = <0x0 0x30000>;
  27. read-only;
  28. };
  29. partition@30000 {
  30. label = "u-boot-env";
  31. reg = <0x30000 0x10000>;
  32. read-only;
  33. };
  34. factory: partition@40000 {
  35. label = "factory";
  36. reg = <0x40000 0x10000>;
  37. read-only;
  38. };
  39. partition@50000 {
  40. label = "firmware";
  41. reg = <0x50000 0x3c8000>;
  42. };
  43. };
  44. ethernet@10100000 {
  45. status = "okay";
  46. };
  47. esw@10110000 {
  48. status = "okay";
  49. ralink,portmap = <0x2f>;
  50. };
  51. gpio-leds {
  52. compatible = "gpio-leds";
  53. 3g {
  54. label = "wr512:green:3g";
  55. gpios = <&gpio0 9 1>;
  56. };
  57. gateway {
  58. label = "wr512:green:gateway";
  59. gpios = <&gpio0 11 1>;
  60. };
  61. ap {
  62. label = "wr512:green:ap";
  63. gpios = <&gpio0 12 1>;
  64. };
  65. wps {
  66. label = "wr512:green:wps";
  67. gpios = <&gpio0 14 1>;
  68. };
  69. station {
  70. label = "wr512:green:station";
  71. gpios = <&gpio0 13 1>;
  72. };
  73. };
  74. gpio-keys-polled {
  75. compatible = "gpio-keys-polled";
  76. #address-cells = <1>;
  77. #size-cells = <0>;
  78. poll-interval = <20>;
  79. reset_wps {
  80. label = "reset_wps";
  81. gpios = <&gpio0 10 1>;
  82. linux,code = <0x198>;
  83. };
  84. mode {
  85. label = "mode";
  86. gpios = <&gpio0 7 1>;
  87. linux,code = <0x32>;
  88. };
  89. };
  90. wmac@10180000 {
  91. status = "okay";
  92. };
  93. otg@101c0000 {
  94. status = "okay";
  95. };
  96. };