Dirk Neukirchen
c25541c024
malta: remove NAMESPACES config symbols
|
9 лет назад | |
|---|---|---|
| .. | ||
| base-files | 9 лет назад | |
| be | 9 лет назад | |
| be64 | 9 лет назад | |
| image | 10 лет назад | |
| le | 9 лет назад | |
| le64 | 9 лет назад | |
| Makefile | 10 лет назад | |
| README | 12 лет назад | |
| config-4.4 | 9 лет назад | |
README
This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.
To use the images built by OpenWrt with qemu, use the following commands:
For the little-endian image:
qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256
For the big-endian image:
qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256
and enjoy the system bootin.
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.
To use the images built by OpenWrt with qemu, use the following commands:
For the little-endian image:
qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256
For the big-endian image:
qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256
and enjoy the system bootin.