openwrt/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8062.dtsi

// SPDX-License-Identifier: GPL-2.0-only

#include "qcom-ipq8064.dtsi"

/ {
	model = "Qualcomm IPQ8062";
	compatible = "qcom,ipq8062", "qcom,ipq8064";

	aliases {
		serial0 = &gsbi4_serial;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		rsvd@41200000 {
			reg = <0x41200000 0x300000>;
			no-map;
		};
	};
};

&gsbi4 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	serial@16340000 {
		status = "okay";
	};
	/*
	* The i2c device on gsbi4 should not be enabled.
	* On ipq806x designs gsbi4 i2c is meant for exclusive
	* RPM usage. Turning this on in kernel manifests as
	* i2c failure for the RPM.
	*/
};

&opp_table0 {
	/delete-node/opp-1200000000;
	/delete-node/opp-1400000000;

	/*
	 * Voltage thresholds are <target min max>
	 */
	opp-384000000 {
		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
		opp-microvolt-speed0-pvs1-v0 = < 925000 878750  971250>;
		opp-microvolt-speed0-pvs2-v0 = < 875000 831250  918750>;
		opp-microvolt-speed0-pvs3-v0 = < 800000 760000  840000>;
	};

	opp-600000000 {
		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
		opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
		opp-microvolt-speed0-pvs2-v0 = < 925000 878750  971250>;
		opp-microvolt-speed0-pvs3-v0 = < 850000 807500  892500>;
	};

	opp-800000000 {
		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
		opp-microvolt-speed0-pvs1-v0 = <1025000  973750 1076250>;
		opp-microvolt-speed0-pvs2-v0 = < 995000  945250 1044750>;
		opp-microvolt-speed0-pvs3-v0 = < 900000  855000  945000>;
	};

	opp-1000000000 {
		opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
		opp-microvolt-speed0-pvs2-v0 = <1025000  973750 1076250>;
		opp-microvolt-speed0-pvs3-v0 = < 950000  902500  997500>;
	};
};

&pcie0 {
	compatible = "qcom,pcie-ipq8064-v2";
};

&pcie1 {
	compatible = "qcom,pcie-ipq8064-v2";
};

&pcie2 {
	compatible = "qcom,pcie-ipq8064-v2";
};

&smb208_s2a {
	regulator-max-microvolt = <1150000>;
};

&smb208_s2b {
	regulator-max-microvolt = <1150000>;
};