| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697 |
- DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
- define Build/spi-loader-okli-compile
- rm -rf [email protected]
- $(CP) spi-loader [email protected]
- $(MAKE) -C [email protected] \
- CROSS_COMPILE="$(TARGET_CROSS)" CONFIG="$(DEVICE_NAME)"
- cp "[email protected]/out/uImage" "$@"
- rm -rf [email protected]
- endef
- define Build/spi-loader-okli
- cat $(KDIR)/loader-$(1) "$@" > "[email protected]"
- mv "[email protected]" "$@"
- endef
- define Device/aerohive_br200-wp
- DEVICE_VENDOR := Aerohive
- DEVICE_MODEL := BR200-WP
- BLOCKSIZE := 128k
- KERNEL_NAME := simpleImage.br200-wp
- KERNEL := kernel-bin | uImage none
- KERNEL_INITRAMFS := kernel-bin | uImage none
- KERNEL_ENTRY := 0x1500000
- KERNEL_LOADADDR := 0x1500000
- KERNEL_SIZE := 8m
- IMAGES := fdt.bin sysupgrade.bin
- IMAGE/fdt.bin := append-dtb
- IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
- append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
- append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
- append-kernel | append-metadata
- IMAGE_SIZE = 63m
- endef
- TARGET_DEVICES += aerohive_br200-wp
- define Device/enterasys_ws-ap3715i
- DEVICE_VENDOR := Enterasys
- DEVICE_MODEL := WS-AP3715i
- BLOCKSIZE := 64k
- KERNEL_NAME := simpleImage.ws-ap3715i
- KERNEL_ENTRY := 0x1500000
- KERNEL_LOADADDR := 0x1500000
- KERNEL = kernel-bin | lzma | uImage lzma
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- endef
- TARGET_DEVICES += enterasys_ws-ap3715i
- define Device/tplink_tl-wdr4900-v1
- DEVICE_VENDOR := TP-Link
- DEVICE_MODEL := TL-WDR4900
- DEVICE_VARIANT := v1
- DEVICE_COMPAT_VERSION := 1.1
- DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
- DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
- TPLINK_HEADER_VERSION := 1
- TPLINK_HWID := 0x49000001
- TPLINK_HWREV := 1
- TPLINK_FLASHLAYOUT := 16Mppc
- KERNEL_NAME := simpleImage.tl-wdr4900-v1
- KERNEL_INITRAMFS :=
- KERNEL := kernel-bin | uImage none -M 0x4f4b4c49 | spi-loader-okli $(1)
- KERNEL_ENTRY := 0x1500000
- KERNEL_LOADADDR := 0x1500000
- SUPPORTED_DEVICES += tl-wdr4900-v1
- COMPILE := loader-$(1)
- COMPILE/loader-$(1) := spi-loader-okli-compile
- ARTIFACTS := fdt.bin
- ARTIFACT/fdt.bin := append-dtb
- IMAGES := factory.bin sysupgrade.bin
- IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
- IMAGE/factory.bin := tplink-v1-image factory
- endef
- TARGET_DEVICES += tplink_tl-wdr4900-v1
- define Device/watchguard_firebox-t10
- DEVICE_VENDOR := Watchguard
- DEVICE_MODEL := Firebox T10
- DEVICE_PACKAGES := kmod-rtc-s35390a kmod-eeprom-at24
- KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- endef
- TARGET_DEVICES += watchguard_firebox-t10
- define Device/sophos_red-15w-rev1
- DEVICE_VENDOR := Sophos
- DEVICE_MODEL := RED 15w
- DEVICE_VARIANT := Rev.1
- # Original firmware uses a dedicated DTB-partition.
- # The bootloader however supports FIT-images.
- KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- endef
- TARGET_DEVICES += sophos_red-15w-rev1
|
