openwrt/include/image-commands.mk

# Build commands that can be called from Device/* templates

IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)

define ModelNameLimit16
$(shell printf %.16s "$(word 2, $(subst _, ,$(1)))")
endef

define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef


define Build/append-dtb
	cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef

define Build/append-dtb-elf
	$(TARGET_CROSS)objcopy \
		--set-section-flags=.appended_dtb=alloc,contents \
		--update-section \
		.appended_dtb=$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef

define Build/append-kernel
	dd if=$(IMAGE_KERNEL) >> $@
endef

define Build/package-kernel-ubifs
	mkdir [email protected]
	cp $@ [email protected]/kernel
	$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
		$(KERNEL_UBIFS_OPTS) \
		-r [email protected] $@
	rm -r [email protected]
endef

define Build/append-image
	cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "[email protected]"
	fwtool -s /dev/null -t "[email protected]" || :
	fwtool -i /dev/null -t "[email protected]" || :
	dd if="[email protected]" >> "$@"
	rm "[email protected]"
endef

ifdef IB
define Build/append-image-stage
	dd if=$(STAGING_DIR_IMAGE)/$(BOARD)-$(SUBTARGET)-$(DEVICE_NAME)-$(1) >> $@
endef
else
define Build/append-image-stage
	cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "[email protected]"
	fwtool -s /dev/null -t "[email protected]" || :
	fwtool -i /dev/null -t "[email protected]" || :
	mkdir -p "$(STAGING_DIR_IMAGE)"
	dd if="[email protected]" of="$(STAGING_DIR_IMAGE)/$(BOARD)-$(SUBTARGET)-$(DEVICE_NAME)-$(1)"
	dd if="[email protected]" >> "$@"
	rm "[email protected]"
endef
endif


compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')

legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
	device 1.0. Please wipe config during upgrade (force required) or reinstall. \
	$(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)

metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
	'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
		"metadata_version": "1.1", \
		"compat_version": "$(call json_quote,$(compat_version))", \
		$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
		$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
			[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
			"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
		$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
		"version": { \
			"dist": "$(call json_quote,$(VERSION_DIST))", \
			"version": "$(call json_quote,$(VERSION_NUMBER))", \
			"revision": "$(call json_quote,$(REVISION))", \
			"target": "$(call json_quote,$(TARGETID))", \
			"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
		} \
	}'

define Build/append-metadata
	$(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
	sha256sum "$@" | cut -d" " -f1 > "[email protected]"
	[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
		cp "$(BUILD_KEY).ucert" "[email protected]" ;\
		usign -S -m "$@" -s "$(BUILD_KEY)" -x "[email protected]" ;\
		ucert -A -c "[email protected]" -x "[email protected]" ;\
		fwtool -S "[email protected]" "$@" ;\
	}
endef

metadata_gl_json = \
	'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
		"metadata_version": "1.1", \
		"compat_version": "$(call json_quote,$(compat_version))", \
		$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
		$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
			[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
			"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
		$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
		"version": { \
			"release": "$(call json_quote,$(VERSION_NUMBER))", \
			"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
			"dist": "$(call json_quote,$(VERSION_DIST))", \
			"version": "$(call json_quote,$(VERSION_NUMBER))", \
			"revision": "$(call json_quote,$(REVISION))", \
			"target": "$(call json_quote,$(TARGETID))", \
			"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
		} \
	}'

define Build/append-gl-metadata
	$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
	sha256sum "$@" | cut -d" " -f1 > "[email protected]"
	[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
		cp "$(BUILD_KEY).ucert" "[email protected]" ;\
		usign -S -m "$@" -s "$(BUILD_KEY)" -x "[email protected]" ;\
		ucert -A -c "[email protected]" -x "[email protected]" ;\
		fwtool -S "[email protected]" "$@" ;\
	}
endef

define Build/append-teltonika-metadata
	echo \
		'{$(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
			"metadata_version": "1.1", \
			"compat_version": "$(call json_quote,$(compat_version))", \
			"version":"$(call json_quote,$(VERSION_DIST))-$(call json_quote,$(VERSION_NUMBER))-$(call json_quote,$(REVISION))", \
			"device_code": [".*"], \
			"hwver": [".*"], \
			"batch": [".*"], \
			"serial": [".*"], \
			$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
			$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
				[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma) \
				"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
			$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma)) \
			"version_wrt": { \
			"dist": "$(call json_quote,$(VERSION_DIST))", \
			"version": "$(call json_quote,$(VERSION_NUMBER))", \
			"revision": "$(call json_quote,$(REVISION))", \
			"target": "$(call json_quote,$(TARGETID))", \
			"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
		}, \
			"hw_support": {}, \
			"hw_mods": {$(shell i=1; for mod in $(SUPPORTED_TELTONIKA_HW_MODS); do [ $$i -gt 1 ] && echo -n ,; echo -n "\"mod$$i\": \"$$mod\""; i=$$((i+1)); done)} \
		}' | fwtool -I - $@
endef

define Build/append-rootfs
	dd if=$(IMAGE_ROOTFS) >> $@
endef

define Build/append-squashfs-fakeroot-be
	rm -rf [email protected] [email protected]
	mkdir [email protected]
	$(STAGING_DIR_HOST)/bin/mksquashfs3-lzma \
		[email protected] [email protected] \
		-noappend -root-owned -be -nopad -b 65536 \
		$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
	cat [email protected] >> $@
endef

define Build/append-squashfs4-fakeroot
	rm -rf [email protected] [email protected]
	mkdir [email protected]
	$(STAGING_DIR_HOST)/bin/mksquashfs4 \
		[email protected] [email protected] \
		-nopad -noappend -root-owned
	cat [email protected] >> $@
endef

define Build/append-string
	echo -n $(1) >> $@
endef

define Build/append-md5sum-ascii-salted
	cp $@ [email protected]
	echo -ne $(1) >> [email protected]
	$(STAGING_DIR_HOST)/bin/mkhash md5 [email protected] | head -c32 >> $@
	rm [email protected]
endef

UBI_NAND_SIZE_LIMIT = $(IMAGE_SIZE) - ($(NAND_SIZE)*20/1024 + 4*$(BLOCKSIZE))

define Build/append-ubi
	sh $(TOPDIR)/scripts/ubinize-image.sh \
		$(if $(UBOOTENV_IN_UBI),--uboot-env) \
		$(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
		$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
		--rootfs $(IMAGE_ROOTFS) \
		[email protected] \
		-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
		$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
		$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
		$(UBINIZE_OPTS)
	cat [email protected] >> $@
	rm [email protected]
	$(if $(and $(IMAGE_SIZE),$(NAND_SIZE)),\
		$(call Build/check-size,$(UBI_NAND_SIZE_LIMIT)))
endef

define Build/ubinize-image
	sh $(TOPDIR)/scripts/ubinize-image.sh \
		$(if $(UBOOTENV_IN_UBI),--uboot-env) \
		$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
		--part $(word 1,$(1))="$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(word 2,$(1))" \
		[email protected] \
		-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
		$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
		$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
		$(UBINIZE_OPTS)
	cat [email protected] >> $@
	rm [email protected]
endef

define Build/ubinize-kernel
	cp $@ [email protected]
	sh $(TOPDIR)/scripts/ubinize-image.sh \
		--kernel [email protected] \
		$@ \
		-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
		$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
		$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
		$(UBINIZE_OPTS)
	rm [email protected]
endef

define Build/append-uboot
	dd if=$(UBOOT_PATH) >> $@
endef

# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
	$(eval type=$(word 1,$(1)))
	$(eval magic=$(word 2,$(1)))
	touch [email protected]
	$(STAGING_DIR_HOST)/bin/mkimage \
		-A $(LINUX_KARCH) -O linux -T $(type) -C none \
		-n '$(VERSION_DIST) fake $(type)' \
		$(if $(magic),-M $(magic)) \
		-d [email protected] \
		-s \
		[email protected]
	cat [email protected] >> $@
endef

define Build/buffalo-dhp-image
	$(STAGING_DIR_HOST)/bin/mkdhpimg $@ [email protected]
	mv [email protected] $@
endef

define Build/buffalo-enc
	$(eval product=$(word 1,$(1)))
	$(eval version=$(word 2,$(1)))
	$(eval args=$(wordlist 3,$(words $(1)),$(1)))
	$(STAGING_DIR_HOST)/bin/buffalo-enc \
		-p $(product) -v $(version) $(args) \
		-i $@ -o [email protected]
	mv [email protected] $@
endef

define Build/buffalo-enc-tag
	$(call Build/buffalo-enc,'' '' -S 152 $(1))
endef

define Build/buffalo-tag-dhp
	$(eval product=$(word 1,$(1)))
	$(eval region=$(word 2,$(1)))
	$(eval language=$(word 3,$(1)))
	$(STAGING_DIR_HOST)/bin/buffalo-tag \
		-d 0x01000000 -w 1 \
		-a $(BUFFALO_TAG_PLATFORM) \
		-v $(BUFFALO_TAG_VERSION) -m $(BUFFALO_TAG_MINOR) \
		-b $(product) -p $(product) \
		-r $(region) -r $(region) -l $(language) \
		-I $@ -o [email protected]
	mv [email protected] $@
endef

define Build/buffalo-trx
	$(eval magic=$(word 1,$(1)))
	$(eval kern_bin=$(if $(1),$(IMAGE_KERNEL),$@))
	$(eval rtfs_bin=$(word 2,$(1)))
	$(eval apnd_bin=$(word 3,$(1)))
	$(eval kern_size=$(if $(KERNEL_SIZE),$(KERNEL_SIZE),0x400000))

	$(if $(rtfs_bin),touch $(rtfs_bin))
	$(STAGING_DIR_HOST)/bin/otrx create [email protected] \
		$(if $(magic),-M $(magic),) \
		-f $(kern_bin) \
		$(if $(rtfs_bin),\
			-a 0x20000 \
			-b $$(( $(call exp_units,$(kern_size)) )) \
			-f $(rtfs_bin),) \
		$(if $(apnd_bin),\
			-A $(apnd_bin) \
			-a 0x20000)
	mv [email protected] $@
endef

define Build/check-size
	@imagesize="$$(stat -c%s $@)"; \
	limitsize="$$(($(call exp_units,$(if $(1),$(1),$(IMAGE_SIZE)))))"; \
	[ $$limitsize -ge $$imagesize ] || { \
		$(call ERROR_MESSAGE,    WARNING: Image file $@ is too big: $$imagesize > $$limitsize); \
		rm -f $@; \
	}
endef

define Build/copy-file
	cat "$(1)" > "$@"
endef

# Create a header for a D-Link AI series recovery image and add it at the beginning of the image
# Currently supported: AQUILA M30, EAGLE M32 and R32
# Arguments:
# 1: Start string of the header
# 2: Firmware version
# 3: Block start address
# 4: Block length
# 5: Device FMID
define Build/dlink-ai-recovery-header
	$(eval header_start=$(word 1,$(1)))
	$(eval firmware_version=$(word 2,$(1)))
	$(eval block_start=$(word 3,$(1)))
	$(eval block_length=$(word 4,$(1)))
	$(eval device_fmid=$(word 5,$(1)))
# create [email protected] without the checksum
	echo -en "$(header_start)\x00\x00" > "[email protected]"
# Calculate checksum over data area ($@) and append it to the header.
# The checksum is the 2byte-sum over the whole data area.
# Every overflow during the checksum calculation must increment the current checksum value by 1.
	od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "[email protected]"
	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00" >> "[email protected]"
	echo -en "$(firmware_version)" >> "[email protected]"
# Only one block supported: Erase start/length is identical to data start/length
	echo -en "$(block_start)$(block_length)$(block_start)$(block_length)" >> "[email protected]"
# Only zeros
	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "[email protected]"
# Last 16 bytes, but without checksum
	echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00" >> "[email protected]"
	echo -en "$(device_fmid)" >> "[email protected]"
# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
# Every overflow during the checksum calculation must increment the current checksum value by 1.
	od -v -w2 -tu2 -An --endian little "[email protected]" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "[email protected]"
	cat "[email protected]" "$@" > "[email protected]"
	mv "[email protected]" "$@"
	rm "[email protected]"
endef

define Build/dlink-sge-image
	$(STAGING_DIR_HOST)/bin/dlink-sge-image $(1) $@ [email protected]
	mv [email protected] $@
endef

define Build/edimax-header
	$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o [email protected] $(1)
	@mv [email protected] $@
endef

define Build/elecom-product-header
	$(eval product=$(word 1,$(1)))
	$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))

	-( \
		echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
		echo -n "0.00" | dd bs=16 count=1 conv=sync; \
		dd if=$(fw); \
	) > $(fw).new \
	&& mv $(fw).new $(fw) || rm -f $(fw)
endef

define Build/elecom-wrc-gs-factory
	$(eval product=$(word 1,$(1)))
	$(eval version=$(word 2,$(1)))
	$(eval hash_opt=$(word 3,$(1)))
	$(MKHASH) md5 $(hash_opt) $@ >> $@
	( \
		echo -n "ELECOM $(product) v$(version)" | \
			dd bs=32 count=1 conv=sync; \
		dd if=$@; \
	) > [email protected]
	mv [email protected] $@
endef

define Build/elx-header
	$(eval hw_id=$(word 1,$(1)))
	$(eval xor_pattern=$(word 2,$(1)))
	( \
		echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
			dd bs=42 count=1 conv=sync; \
		hw_id="$(hw_id)"; \
		echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
			dd bs=20 count=1 conv=sync; \
		echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
			dd bs=8 count=1 conv=sync; \
		echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
			dd bs=58 count=1 conv=sync; \
	) > $(KDIR)/tmp/$(DEVICE_NAME).header
	-$(call Build/xor-image,-p $(xor_pattern) -x) \
	&& cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > [email protected] \
	&& mv [email protected] $@ \
	&& rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
endef

define Build/eva-image
	$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ [email protected]
	mv [email protected] $@
endef

define Build/initrd_compression
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_BZIP2),.bzip2) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_GZIP),.gzip) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZ4),.lz4) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA),.lzma) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZO),.lzo) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_XZ),.xz) \
	$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
endef

define Build/fit
	$(if $(findstring with-rootfs,$(word 3,$(1))), \
		$(call locked,dd if=$(IMAGE_ROOTFS) of=$(IMAGE_ROOTFS).pagesync bs=4096 conv=sync, \
		  gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME)))))
	$(TOPDIR)/scripts/mkits.sh \
		-D $(DEVICE_NAME) -o [email protected] -k $@ \
		-C $(word 1,$(1)) \
		$(if $(word 2,$(1)),\
			$(if $(findstring 11,$(if $(DEVICE_DTS_OVERLAY),1)$(if $(findstring $(KERNEL_BUILD_DIR)/image-,$(word 2,$(1))),,1)), \
				-d $(KERNEL_BUILD_DIR)/image-$$(basename $(word 2,$(1))), \
				-d $(word 2,$(1)))) \
		$(if $(findstring with-rootfs,$(word 3,$(1))),-r $(IMAGE_ROOTFS)) \
		$(if $(findstring with-initrd,$(word 3,$(1))), \
			$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
				-i $(KERNEL_BUILD_DIR)/initrd$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME))).cpio$(strip $(call Build/initrd_compression)))) \
		-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
		$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
		$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
		$(if $(DEVICE_DTS_LOADADDR),-s $(DEVICE_DTS_LOADADDR)) \
		$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
		-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
		-A $(LINUX_KARCH) -v $(LINUX_VERSION)
	$(call locked,PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
		-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f [email protected] [email protected], \
	  gen-cpio$(if $(TARGET_PER_DEVICE_ROOTFS),.$(ROOTFS_ID/$(DEVICE_NAME))))
	@mv [email protected] $@
endef

define Build/libdeflate-gzip
	$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > [email protected]
	@mv [email protected] $@
endef

define Build/gzip
	$(STAGING_DIR_HOST)/bin/gzip -f -9n -c $@ $(1) > [email protected]
	@mv [email protected] $@
endef

define Build/gzip-filename
	@mkdir -p [email protected]
	@cp $@ [email protected]/$(word 1,$(1))
	$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" [email protected]/$(word 1,$(1)) $(word 2,$(1)))
	$(STAGING_DIR_HOST)/bin/gzip -f -9 -N -c [email protected]/$(word 1,$(1)) $(word 2,$(1)) > [email protected]
	@mv [email protected] $@
	@rm -rf [email protected]
endef

define Build/install-dtb
	$(call locked, \
		$(foreach dts,$(DEVICE_DTS), \
			$(CP) \
				$(DTS_DIR)/$(dts).dtb \
				$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
		), \
		install-dtb-$(IMG_PREFIX) \
	)
endef

define Build/iptime-crc32
	$(STAGING_DIR_HOST)/bin/iptime-crc32 $(1) $@ [email protected]
	mv [email protected] $@
endef

define Build/iptime-naspkg
	$(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ [email protected]
	mv [email protected] $@
endef

define Build/jffs2
	rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
		mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(word 1,$(1))) && \
		cp $@ $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$(word 1,$(1)) && \
		$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad \
			$(if $(CONFIG_BIG_ENDIAN),--big-endian,--little-endian) \
			--squash-uids -v -e $(patsubst %k,%KiB,$(BLOCKSIZE)) \
			-o [email protected] \
			-d $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 \
			$(wordlist 2,$(words $(1)),$(1)) \
			2>&1 1>/dev/null | awk '/^.+$$$$/' && \
		$(STAGING_DIR_HOST)/bin/padjffs2 [email protected] -J $(patsubst %k,,$(BLOCKSIZE))
	-rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/
	@mv [email protected] $@
endef

define Build/yaffs-filesystem
	let \
		kernel_size="$$(stat -c%s $@)" \
		kernel_chunks="(kernel_size / 1024) + 1" \
		filesystem_chunks="kernel_chunks + 3" \
		filesystem_blocks="(filesystem_chunks / 63) + 1" \
		filesystem_size="filesystem_blocks * 64 * 1024" \
		filesystem_size_with_reserve="(filesystem_blocks + 2) * 64 * 1024"; \
		head -c $$filesystem_size_with_reserve /dev/zero | tr "\000" "\377" > [email protected] \
		&& yafut -d [email protected] -w -i $@ -o $(if $(findstring v7,$@),bootimage,kernel) -C 1040 -B 64k -E -P -S $(1) \
		&& truncate -s $$filesystem_size [email protected] \
		&& mv [email protected] $@
endef

define Build/kernel-bin
	rm -f $@
	cp $< $@
endef

define Build/gl-qsdk-factory
	$(eval GL_NAME := $(call param_get_default,type,$(1),$(DEVICE_NAME)))
	$(eval GL_IMGK := $(KDIR_TMP)/$(DEVICE_IMG_PREFIX)-squashfs-factory.img)
	$(eval GL_ITS := $(KDIR_TMP)/$(GL_NAME).its)
	$(eval GL_UBI := "ubi")

	$(CP) $(BOOT_SCRIPT) $(KDIR_TMP)/
	$(shell mv $(GL_IMGK) $(GL_IMGK).tmp)

	sed -i "s/rootfs_size/`wc -c $(GL_IMGK) | \
	cut -d " " -f 1 | xargs printf "0x%x"`/g" $(KDIR_TMP)/$(BOOT_SCRIPT);

	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
		$(GL_ITS) \
		$(BOOT_SCRIPT) \
		$(GL_UBI) \
		$(GL_IMGK)

	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f \
		$(GL_ITS) \
		$(GL_IMGK)

	$(RM) \
		$(GL_ITS) \
		$(GL_IMGK).tmp \
		$(KDIR_TMP)/$(notdir $(BOOT_SCRIPT))
endef

define Build/kernel-pack-npk
	$(STAGING_DIR_HOST)/bin/npk_pack_kernel $@ [email protected]
	mv [email protected] $@
endef

define Build/linksys-image
	let \
		size="$$(stat -c%s $@)" \
		pad="$(call exp_units,$(PAGESIZE))" \
		offset="256" \
		pad="(pad - ((size + offset) % pad)) % pad"; \
		dd if=/dev/zero bs=$$pad count=1 | tr '\000' '\377' >> $@
	printf ".LINKSYS.01000409%-15s%08X%-8s%-16s" \
		"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
		"$$(cksum $@ | cut -d ' ' -f1)" \
		"0" "K0000000F0246434" >> $@
	dd if=/dev/zero bs=192 count=1 >> $@
endef

define Build/lzma
	$(call Build/lzma-no-dict,-lc1 -lp2 -pb2 $(1))
endef

define Build/lzma-no-dict
	$(STAGING_DIR_HOST)/bin/lzma e $@ $(1) [email protected]
	@mv [email protected] $@
endef

define Build/moxa-encode-fw
	$(TOPDIR)/scripts/moxa-encode-fw.py \
		--input $@ \
		--output $@ \
		--magic $(MOXA_MAGIC) \
		--hwid $(MOXA_HWID) \
		--buildid 00000000
endef

define Build/netgear-chk
	$(STAGING_DIR_HOST)/bin/mkchkimg \
		-o [email protected] \
		-k $@ \
		-b $(NETGEAR_BOARD_ID) \
		$(if $(NETGEAR_REGION),-r $(NETGEAR_REGION),)
	mv [email protected] $@
endef

define Build/netgear-dni
	$(STAGING_DIR_HOST)/bin/mkdniimg \
		-B $(NETGEAR_BOARD_ID) -v $(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
		$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
		-r "$(1)" \
		-i $@ -o [email protected]
	mv [email protected] $@
endef

define Build/netgear-encrypted-factory
	$(TOPDIR)/scripts/netgear-encrypted-factory.py \
		--input-file $@ \
		--output-file $@ \
		--model $(NETGEAR_ENC_MODEL) \
		--region $(NETGEAR_ENC_REGION) \
		$(if $(NETGEAR_ENC_HW_ID_LIST),--hw-id-list "$(NETGEAR_ENC_HW_ID_LIST)") \
		$(if $(NETGEAR_ENC_MODEL_LIST),--model-list "$(NETGEAR_ENC_MODEL_LIST)") \
		--version V1.0.0.0.$(shell cat $(VERSION_DIST)| sed -e 's/[[:space:]]/-/g').$(firstword $(subst -, ,$(REVISION))) \
		--encryption-block-size 0x20000 \
		--openssl-bin "$(STAGING_DIR_HOST)/bin/openssl" \
		--key 6865392d342b4d212964363d6d7e7765312c7132613364316e26322a5a5e2538 \
		--iv 4a253169516c38243d6c6d2d3b384145
endef

define Build/openmesh-image
	$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
		"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
		"[email protected]" \
		"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
		"$(call param_get_default,rootfs,$(1),$@)"
	$(TOPDIR)/scripts/combined-ext-image.sh \
		"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
		"[email protected]" "fwupgrade.cfg" \
		"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
		"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef

define Build/dualboot-datachk-nand-image
	$(TOPDIR)/scripts/nand-fwupgradecfg-gen.sh \
		"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
		"[email protected]" \
		"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
		"$(call param_get_default,rootfs,$(1),$@)"
	$(TOPDIR)/scripts/combined-ext-image.sh \
		"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
		"[email protected]" "fwupgrade.cfg" \
		"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
		"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef

define Build/pad-extra
	dd if=/dev/zero bs=$(1) count=1 >> $@
endef

define Build/pad-offset
	let \
		size="$$(stat -c%s $@)" \
		pad="$(call exp_units,$(word 1, $(1)))" \
		offset="$(call exp_units,$(word 2, $(1)))" \
		pad="(pad - ((size + offset) % pad)) % pad" \
		newsize='size + pad'; \
		dd if=$@ [email protected] bs=$$newsize count=1 conv=sync
	mv [email protected] $@
endef

define Build/pad-rootfs
	$(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \
		$(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256)
endef

define Build/pad-to
	$(call Image/pad-to,$@,$(1))
endef

define Build/patch-cmdline
	$(STAGING_DIR_HOST)/bin/patch-cmdline $@ '$(CMDLINE)'
endef

# Convert a raw image into a $1 type image.
# E.g. | qemu-image vdi <optional extra arguments to qemu-img binary>
define Build/qemu-image
	if command -v qemu-img; then \
		qemu-img convert -f raw -O $1 $@ [email protected]; \
		mv [email protected] $@; \
	else \
		echo "WARNING: Install qemu-img to create VDI/VMDK images" >&2; exit 1; \
	fi
endef

define Build/qsdk-ipq-factory-nand
	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
		[email protected] ubi $@
	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f [email protected] [email protected]
	@mv [email protected] $@
endef

define Build/qsdk-ipq-factory-nor
	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
		[email protected] hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f [email protected] [email protected]
	@mv [email protected] $@
endef

define Build/seama
	$(STAGING_DIR_HOST)/bin/seama -i $@ \
		-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
	mv [email protected] $@
endef

define Build/seama-seal
	$(STAGING_DIR_HOST)/bin/seama -i $@ -s [email protected] \
		-m "signature=$(SEAMA_SIGNATURE)"
	mv [email protected] $@
endef

define Build/senao-header
	-$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o [email protected] \
	&& mv [email protected] $@ || rm -f $@
endef

define Build/sysupgrade-tar
	$(eval dtb=$(call param_get,dtb,$(1)))
	sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
		--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
		--kernel $(call param_get_default,kernel,$(1),$(IMAGE_KERNEL)) \
		--rootfs $(call param_get_default,rootfs,$(1),$(IMAGE_ROOTFS)) \
		$(if $(dtb),--dtb $(dtb)) \
		$@
endef

define Build/tplink-image-2022
	$(TOPDIR)/scripts/tplink-mkimage-2022.py  \
		--create [email protected] \
		--rootfs $@ \
		--support "$(TPLINK_SUPPORT_STRING)"
	@mv [email protected] $@
endef

define Build/tplink-safeloader
	-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
		-B $(TPLINK_BOARD_ID) \
		-V $(REVISION) \
		-k $(IMAGE_KERNEL) \
		-r $@ \
		-o [email protected] \
		-j \
		$(wordlist 2,$(words $(1)),$(1)) \
		$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv [email protected] $@ || rm -f $@
endef

define Build/tplink-v1-header
	$(STAGING_DIR_HOST)/bin/mktplinkfw \
		-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
		-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
		-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V $(REVISION) \
		-k $@ -o [email protected] $(1)
	@mv [email protected] $@
endef

# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/tplink-v1-image
	-$(STAGING_DIR_HOST)/bin/mktplinkfw \
		-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
		-N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
		-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o [email protected] -j -X 0x40000 \
		-a $(call rootfs_align,$(FILESYSTEM)) \
		$(wordlist 2,$(words $(1)),$(1)) \
		$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv [email protected] $@ || rm -f $@
endef

define Build/tplink-v2-header
	-$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
		-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
		-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR))  \
		-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
		-T $(TPLINK_HVERSION) -V "ver. 2.0" \
		-k $@ -o [email protected] $(1) \
	&& mv [email protected] $@ || rm -f $@
endef

define Build/tplink-v2-image
	-$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
		-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
		-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
		-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
		-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o [email protected] $(1) \
	&& cat [email protected] >> $@ && rm -rf [email protected] || rm -f $@
endef

define Build/uImage
	$(if $(UIMAGE_TIME),SOURCE_DATE_EPOCH="$(UIMAGE_TIME)") \
	mkimage \
		-A $(LINUX_KARCH) \
		-O linux \
		-T kernel \
		-C $(word 1,$(1)) \
		-a $(KERNEL_LOADADDR) \
		-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
		-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
		$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
		$(wordlist 2,$(words $(1)),$(1)) \
		-d $@ [email protected]
	mv [email protected] $@
endef

define Build/multiImage
	$(if $(UIMAGE_TIME),SOURCE_DATE_EPOCH="$(UIMAGE_TIME)") \
	mkimage \
		-A $(LINUX_KARCH) \
		-O linux \
		-T multi \
		-C $(word 1,$(1)) \
		-a $(KERNEL_LOADADDR) \
		-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
		-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
		$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
		-d $@:$(word 2,$(1)):$(word 3,$(1)) \
		$(wordlist 4,$(words $(1)),$(1)) \
		[email protected]
	mv [email protected] $@
endef

define Build/xor-image
	-$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o [email protected] $(1) \
	&& mv [email protected] $@ || rm -f $@
endef

define Build/zip
	rm -rf [email protected]
	mkdir [email protected]
	mv $@ [email protected]/$(word 1,$(1))
	TZ=UTC $(STAGING_DIR_HOST)/bin/zip -j -X \
		$(wordlist 2,$(words $(1)),$(1)) \
		$@ [email protected]/$(if $(word 1,$(1)),$(word 1,$(1)),$$(basename $@))
	rm -rf [email protected]
endef

define Build/zyimage
	$(STAGING_DIR_HOST)/bin/zyimage $(1) $@
endef

define Build/zyxel-ras-image
	let \
		newsize="$(call exp_units,$(RAS_ROOTFS_SIZE))"; \
		$(STAGING_DIR_HOST)/bin/mkrasimage \
			-b $(RAS_BOARD) \
			-v $(RAS_VERSION) \
			-r $@ \
			-s $$newsize \
			-o [email protected] \
			$(if $(findstring separate-kernel,$(word 1,$(1))),-k $(IMAGE_KERNEL)) \
		&& mv [email protected] $@
endef