openwrt/target/linux/ramips/mt7621/base-files/etc/board.d/02_network

. /lib/functions.sh
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh

ramips_setup_interfaces()
{
	local board="$1"

	case $board in
	alfa-network,ax1800rm|\
	ampedwireless,ally-r1900k|\
	asus,rt-ax53u|\
	buffalo,wsr-2533dhpl2|\
	buffalo,wsr-2533dhpls|\
	confiabits,mt7621-v1|\
	dlink,dir-x1860-b1|\
	edup,ep-rt2960s|\
	gehua,ghl-r-001|\
	h3c,tx1800-plus|\
	h3c,tx1801-plus|\
	h3c,tx1806|\
	haier,har-20s2u1|\
	hiwifi,hc5962|\
	mercusys,mr70x-v1|\
	netgear,wax202|\
	sim,simax1800t|\
	sim,simax1800u|\
	tplink,mr600-v2-eu|\
	xiaomi,mi-router-3-pro|\
	xiaomi,mi-router-ac2100|\
	xiaomi,mi-router-cr6606|\
	xiaomi,mi-router-cr6608|\
	xiaomi,mi-router-cr6609|\
	xiaomi,redmi-router-ac2100|\
	z-router,zr-2660|\
	zyxel,wsm20)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
		;;
	arcadyan,we420223-99)
		ucidef_set_interface_lan "swp0 swp1"
		;;
	ampedwireless,ally-00x19k|\
	arcadyan,we410443|\
	asus,rp-ac56|\
	asus,rp-ac87|\
	cudy,ap1300-outdoor-v1|\
	dlink,dap-1620-b1|\
	dlink,dap-x1860-a1|\
	dlink,dra-1360-a1|\
	edimax,re23s|\
	linksys,re7000|\
	mikrotik,ltap-2hnd|\
	mikrotik,routerboard-m11g|\
	netgear,eax12|\
	netgear,ex6150|\
	netgear,wax214v2|\
	plasmacloud,pax1800-lite|\
	sercomm,na502|\
	sercomm,na502s|\
	thunder,timecloud|\
	tplink,eap613-v1|\
	tplink,re350-v1|\
	tplink,re500-v1|\
	tplink,re650-v1|\
	tplink,re650-v2|\
	ubnt,unifi-6-lite|\
	ubnt,unifi-flexhd|\
	ubnt,unifi-nanohd|\
	yuncore,fap690|\
	wavlink,wl-wn573hx1|\
	wodesys,wd-r1802u|\
	zyxel,nwa50ax|\
	zyxel,nwa55axe)
		ucidef_set_interface_lan "lan"
		;;
	asiarf,ap7621-001|\
	comfast,cf-e390ax|\
	comfast,cf-ew72-v2|\
	cudy,m1300-v2|\
	cudy,m1800|\
	dna,valokuitu-plus-ex400|\
	genexis,pulse-ex400|\
	humax,e10|\
	keenetic,kn-3510|\
	maginon,mc-1200ac|\
	meig,slt866|\
	openfi,5pro|\
	wavlink,ws-wn572hp3-4g|\
	winstars,ws-wn583a6|\
	yuncore,ax820|\
        zyxel,lte7490-m904|\
	zyxel,nr7101)
		ucidef_set_interfaces_lan_wan "lan" "wan"
		;;
	asiarf,ap7621-nv1|\
	beeline,smartbox-flash|\
	beeline,smartbox-giga|\
	elecom,wmc-x1800gst|\
	elecom,wrc-x1800gs|\
	gemtek,wvrtm-127acn|\
	glinet,gl-mt1300|\
	iodata,wn-deax1800gr|\
	iptime,a3002mesh|\
	jcg,q20|\
	jdcloud,re-sp-01b|\
	lenovo,newifi-d1|\
	mikrotik,routerboard-m33g|\
	mts,wg430223|\
	oraybox,x3a|\
	renkforce,ws-wn530hp3-a|\
	xiaomi,mi-router-3g|\
	xiaomi,mi-router-3g-v2|\
	xiaomi,mi-router-4|\
	xiaomi,mi-router-4a-gigabit|\
	xiaomi,mi-router-4a-gigabit-v2)
		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
		;;
	bolt,arion)
		ucidef_set_interfaces_lan_wan "lan" "wan"
		ucidef_set_interface "eth_data" device "modem.103" protocol "static" ipaddr "10.22.127.222" netmask "255.255.255.255"
		ucidef_set_interface "eth_om" device "modem.4094" protocol "static" ipaddr "169.254.0.2" netmask "255.255.255.252"
		uci add_list firewall.@zone[1].network='eth_data'
		uci add_list firewall.@zone[1].network='eth_om'
		;;
	cudy,c200p|\
	cudy,r700|\
	mikrotik,routerboard-750gr3)
		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
		;;
	dlink,covr-x1860-a1)
		ucidef_set_interfaces_lan_wan "ethernet" "internet"
		;;
	elecom,wmc-s1267gs2|\
	linksys,re6500|\
	netgear,wac104|\
	zyxel,lte3301-plus)
		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
		;;
	elecom,wsc-x1800gs)
		ucidef_set_interface_lan "lan1 lan2"
		;;
	gnubee,gb-pc1)
		ucidef_set_interface_lan "ethblack ethblue"
		;;
	gnubee,gb-pc2)
		ucidef_set_interface_lan "ethblack ethblue ethyellow"
		;;
	mikrotik,routerboard-760igs)
		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
		;;
	mqmaker,witi)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan1 wan2"
		;;
	tozed,zlt-s12-pro)
		ucidef_set_interface_lan "lan1 lan2 lan3 wan"
		ucidef_set_interface "wwan" device "/dev/ttyUSB0" protocol "ncm"
		uci add_list firewall.@zone[1].network='wwan'
		;;
	tplink,deco-m4r-v4)
		ucidef_set_interfaces_lan_wan "eth1" "eth0"
		;;
	tplink,eap235-wall-v1|\
	tplink,eap615-wall-v1)
		ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
		;;
	tplink,er605-v2)
		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan1"
		;;
	tplink,tl-wpa8631p-v3)
		ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
		;;
	ubnt,edgerouter-x)
		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
		;;
	ubnt,edgerouter-x-sfp)
		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
		;;
	ubnt,usw-flex)
		ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
		;;
	zyxel,lte5398-m904)
		ucidef_set_interface_lan "lan1 lan2"
		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
		;;
	zyxel,wap6805)
		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
		ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
		;;
	ruijie,rg-ew1200g-pro-v1.1)
		ucidef_set_interfaces_lan_wan "lan3 lan2 lan1" "wan"
		;;
	*)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
		;;
	esac
}

ramips_setup_macs()
{
	local board="$1"
	local lan_mac=""
	local wan_mac=""
	local label_mac=""

	case $board in
	alfa-network,ax1800rm|\
	jcg,y2|\
	wavlink,wl-wn531a6|\
	wavlink,wl-wn533a8|\
	winstars,ws-wn583a6|\
	zbtlink,zbt-we1326|\
	zbtlink,zbt-wg108|\
	zbtlink,zbt-wg3526-16m|\
	zbtlink,zbt-wg3526-32m)
		label_mac=$(mtd_get_mac_binary factory 0x4)
		;;
	ampedwireless,ally-00x19k)
		lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
		label_mac=$lan_mac
		;;
	ampedwireless,ally-r1900k)
		lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
		wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
		label_mac=$lan_mac
		;;
	arcadyan,we410443)
		label_mac=$(mtd_get_mac_ascii config mac)
		lan_mac=$label_mac
		;;
	arcadyan,we420223-99)
		label_mac=$(mtd_get_mac_ascii board_data mac)
		lan_mac=$label_mac
		ucidef_set_network_device_mac eth0 $(macaddr_add "$label_mac" 3)
	;;
	asus,rt-ac65p|\
	asus,rt-ac85p)
		wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
		label_mac=$(mtd_get_mac_binary factory 0x4)
		;;
	beeline,smartbox-flash)
		wan_mac=$(mtd_get_mac_encrypted_arcadyan "board_data")
		label_mac=$(macaddr_add "$wan_mac" 3)
		lan_mac=$label_mac
		;;
	buffalo,wsr-1166dhp|\
	buffalo,wsr-2533dhpl2|\
	buffalo,wsr-2533dhpls)
		wan_mac=$(mtd_get_mac_ascii board_data "mac")
		lan_mac=$wan_mac
		label_mac=$wan_mac
		;;
	dlink,covr-x1860-a1)
		label_mac=$(mtd_get_mac_ascii config2 factory_mac)
		wan_mac=$(macaddr_add "$label_mac" 3)
		lan_mac=$label_mac
		;;
	dlink,dir-860l-b1)
		lan_mac=$(mtd_get_mac_ascii factory lanmac)
		wan_mac=$(mtd_get_mac_ascii factory wanmac)
		;;
	edimax,ra21s|\
	edimax,rg21s)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		;;
	elecom,wrc-2533ghbk2-t|\
	elecom,wrc-2533ghbk-i)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		label_mac=$wan_mac
		;;
	h3c,tx1800-plus|\
	h3c,tx1801-plus|\
	h3c,tx1806)
		label_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		lan_mac=$(macaddr_add "$label_mac" 1)
		wan_mac=$label_mac
		;;
	iodata,wnpr2600g)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		label_mac=$wan_mac
		;;
	iptime,t5004)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(macaddr_add "$lan_mac" 1)
		;;
	jdcloud,re-sp-01b)
		lan_mac=$(mtd_get_mac_ascii config mac)
		wan_mac=$lan_mac
		label_mac=$lan_mac
		;;
	linksys,e5600|\
	linksys,ea6350-v4|\
	linksys,ea7300-v1|\
	linksys,ea7300-v2|\
	linksys,ea7500-v2|\
	linksys,ea8100-v1|\
	linksys,ea8100-v2)
		lan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
		wan_mac=$lan_mac
		label_mac=$lan_mac
		;;
	belkin,rt1800|\
	linksys,e7350)
		lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
		wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
		label_mac=$lan_mac
		;;
	tplink,er605-v2)
		CI_UBIPART="firmware"
		label_mac=$(mtd_get_mac_uci_config_ubi "tddp")
		lan_mac=$label_mac
		wan_mac=$(macaddr_add "$label_mac" 1)
		;;
	tplink,mr600-v2-eu)
		label_mac=$(cat "/sys/class/net/eth0/address")
		wwan_mac=$(macaddr_add $label_mac 1)
		ucidef_set_interface "wwan0" device "/dev/cdc-wdm0" protocol "qmi" macaddr "$wwan_mac"
		;;
	ruijie,rg-ew1200g-pro-v1.1)
		lan_mac=$(mtd_get_mac_ascii product_info ethaddr)
		wan_mac=$(macaddr_add "$lan_mac" 8)
		label_mac=$lan_mac
		;;
	mts,wg430223)
		wan_mac=$(mtd_get_mac_encrypted_arcadyan "board_data")
		label_mac=$wan_mac
		lan_mac=$(macaddr_add "$wan_mac" 2)
		;;
	netgear,eax12)
		lan_mac=$(mtd_get_mac_ascii Config mac)
		label_mac=$lan_mac
		;;
	netgear,wax202)
		lan_mac=$(mtd_get_mac_ascii Config mac)
		wan_mac=$(macaddr_add "$lan_mac" 1)
		label_mac=$lan_mac
		;;
	netgear,wax214v2)
		lan_mac=$(mtd_get_mac_ascii Config ethaddr)
		label_mac=$lan_mac
		;;
	yuncore,ax820)
		label_mac=$(mtd_get_mac_binary Factory 0x4)
		;;
	esac

	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}

board_config_update
board=$(board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
board_config_flush

exit 0