openwrt/package/kernel/mac80211/patches/rt2x00/602-01-wifi-rt2x00-Add-support-for-loading-EEPROM-from-user.patch

From 1046fc9e98936991aeb0b0656c84833d96a63c0f Mon Sep 17 00:00:00 2001
From: Christian Marangi <[email protected]>
Date: Sun, 15 Oct 2023 14:22:49 +0200
Subject: [PATCH 1/5] wifi: rt2x00: Add support for loading EEPROM from
 userspace

Add support for loading EEPROM from userspace.

Signed-off-by: Christian Marangi <[email protected]>
---
 drivers/net/wireless/ralink/rt2x00/Kconfig    |  5 ++
 drivers/net/wireless/ralink/rt2x00/Makefile   |  1 +
 .../net/wireless/ralink/rt2x00/rt2800soc.c    | 15 +---
 drivers/net/wireless/ralink/rt2x00/rt2x00.h   |  1 +
 .../net/wireless/ralink/rt2x00/rt2x00dev.c    |  9 +++
 .../net/wireless/ralink/rt2x00/rt2x00eeprom.c | 75 +++++++++++++++++++
 .../net/wireless/ralink/rt2x00/rt2800soc.c    |  1 +
 .../net/wireless/ralink/rt2x00/rt2800soc.h    |  9 +++
 8 files changed, 102 insertions(+), 14 deletions(-)
 create mode 100644 drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c

--- a/local-symbols
+++ b/local-symbols
@@ -336,6 +336,7 @@ RT2X00_LIB_FIRMWARE=
 RT2X00_LIB_CRYPTO=
 RT2X00_LIB_LEDS=
 RT2X00_LIB_DEBUGFS=
+RT2X00_LIB_EEPROM=
 RT2X00_DEBUG=
 WLAN_VENDOR_REALTEK=
 RTL8180=
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -70,6 +70,7 @@ config RT2800PCI
 	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_PCI
 	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_EEPROM
 	select RT2X00_LIB_CRYPTO
 	depends on EEPROM_93CX6
 	help
@@ -213,6 +214,7 @@ config RT2800SOC
 	select RT2X00_LIB_MMIO
 	select RT2X00_LIB_CRYPTO
 	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_EEPROM
 	select RT2800_LIB
 	select RT2800_LIB_MMIO
 	help
@@ -259,6 +261,9 @@ config RT2X00_LIB_FIRMWARE
 config RT2X00_LIB_CRYPTO
 	bool
 
+config RT2X00_LIB_EEPROM
+	bool
+
 config RT2X00_LIB_LEDS
 	bool
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
--- a/drivers/net/wireless/ralink/rt2x00/Makefile
+++ b/drivers/net/wireless/ralink/rt2x00/Makefile
@@ -8,6 +8,7 @@ rt2x00lib-$(CPTCFG_RT2X00_LIB_DEBUGFS)	+
 rt2x00lib-$(CPTCFG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
 rt2x00lib-$(CPTCFG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CPTCFG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
+rt2x00lib-$(CPTCFG_RT2X00_LIB_EEPROM)	+= rt2x00eeprom.o
 
 obj-$(CPTCFG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CPTCFG_RT2X00_LIB_MMIO)		+= rt2x00mmio.o
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -90,19 +90,6 @@ static int rt2800soc_set_device_state(st
 	return retval;
 }
 
-static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
-{
-	void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
-
-	if (!base_addr)
-		return -ENOMEM;
-
-	memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
-
-	iounmap(base_addr);
-	return 0;
-}
-
 /* Firmware functions */
 static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
@@ -190,7 +177,7 @@ static const struct rt2800_ops rt2800soc
 	.register_multiread	= rt2x00mmio_register_multiread,
 	.register_multiwrite	= rt2x00mmio_register_multiwrite,
 	.regbusy_read		= rt2x00mmio_regbusy_read,
-	.read_eeprom		= rt2800soc_read_eeprom,
+	.read_eeprom		= rt2x00lib_read_eeprom,
 	.hwcrypt_disabled	= rt2800soc_hwcrypt_disabled,
 	.drv_write_firmware	= rt2800soc_write_firmware,
 	.drv_init_registers	= rt2800mmio_init_registers,
@@ -304,6 +291,7 @@ static int rt2x00soc_probe(struct platfo
 	rt2x00dev->name = pdev->dev.driver->name;
 	rt2x00dev->csr.base = mem;
 
+	set_bit(REQUIRE_EEPROM_FILE, &rt2x00dev->cap_flags);
 	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
 
 	retval = rt2x00lib_probe_dev(rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -692,6 +692,7 @@ enum rt2x00_capability_flags {
 	REQUIRE_HT_TX_DESC,
 	REQUIRE_PS_AUTOWAKE,
 	REQUIRE_DELAYED_RFKILL,
+	REQUIRE_EEPROM_FILE,
 
 	/*
 	 * Capabilities
@@ -1506,4 +1507,13 @@ void rt2x00lib_remove_dev(struct rt2x00_
 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev);
 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
 
+/*
+ * EEPROM file handlers.
+ */
+#ifdef CPTCFG_RT2X00_LIB_EEPROM
+int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev);
+#else
+#define rt2x00lib_read_eeprom	NULL
+#endif /* CPTCFG_RT2X00_LIB_EEPROM */
+ 
 #endif /* RT2X00_H */
--- /dev/null
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*	Copyright (C) 2004 - 2009 Ivo van Doorn <[email protected]>
+ *	Copyright (C) 2004 - 2009 Gertjan van Wingerde <[email protected]>
+ *	<http://rt2x00.serialmonkey.com>
+ */
+
+/*	Module: rt2x00lib
+ *	Abstract: rt2x00 eeprom file loading routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "rt2x00.h"
+
+static const char *
+rt2x00lib_get_eeprom_file_name(struct rt2x00_dev *rt2x00dev)
+{
+	struct device_node *np = rt2x00dev->dev->of_node;
+	const char *eep;
+
+	if (np && !of_property_read_string(np, "ralink,eeprom", &eep))
+		return eep;
+
+	return NULL;
+}
+
+static int rt2x00lib_read_eeprom_file(struct rt2x00_dev *rt2x00dev)
+{
+	const struct firmware *ee;
+	const char *ee_name;
+	int retval;
+
+	ee_name = rt2x00lib_get_eeprom_file_name(rt2x00dev);
+	if (!ee_name && test_bit(REQUIRE_EEPROM_FILE, &rt2x00dev->cap_flags)) {
+		rt2x00_err(rt2x00dev, "Required EEPROM name is missing.");
+		return -EINVAL;
+	}
+
+	if (!ee_name)
+		return -ENOENT;
+
+	rt2x00_info(rt2x00dev, "Loading EEPROM data from '%s'.\n", ee_name);
+
+	retval = request_firmware(&ee, ee_name, rt2x00dev->dev);
+	if (retval) {
+		rt2x00_err(rt2x00dev, "Failed to request EEPROM.\n");
+		return retval;
+	}
+
+	if (!ee || !ee->size || !ee->data) {
+		rt2x00_err(rt2x00dev, "Failed to read EEPROM file.\n");
+		retval = -ENOENT;
+		goto err_exit;
+	}
+
+	if (ee->size != rt2x00dev->ops->eeprom_size) {
+		rt2x00_err(rt2x00dev,
+			   "EEPROM file size is invalid, it should be %d bytes\n",
+			   rt2x00dev->ops->eeprom_size);
+		retval = -EINVAL;
+		goto err_release_ee;
+	}
+
+	memcpy(rt2x00dev->eeprom, ee->data, rt2x00dev->ops->eeprom_size);
+
+err_release_ee:
+	release_firmware(ee);
+err_exit:
+	return retval;
+}
+
+int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00lib_read_eeprom_file(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_read_eeprom);
--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -278,6 +278,9 @@ static int rt2800pci_read_eeprom(struct
 {
 	int retval;
 
+	if (!rt2x00lib_read_eeprom(rt2x00dev))
+		return 0;
+
 	if (rt2800pci_efuse_detect(rt2x00dev))
 		retval = rt2800pci_read_eeprom_efuse(rt2x00dev);
 	else