| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105 |
- #
- # Copyright (c) 2015 The Linux Foundation. All rights reserved.
- # Copyright (c) 2011-2015 OpenWrt.org
- #
- . /lib/functions/uci-defaults.sh
- . /lib/functions/system.sh
- ipq806x_setup_interfaces()
- {
- local board="$1"
- case "$board" in
- arris,tr4400-v2)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth2"
- ;;
- askey,rt4230w-rev6|\
- asrock,g10|\
- buffalo,wxr-2533dhp|\
- compex,wpq864|\
- linksys,e8350-v1|\
- linksys,ea7500-v1|\
- linksys,ea8500|\
- nec,wg2600hp|\
- nec,wg2600hp3|\
- netgear,d7800|\
- netgear,r7500|\
- netgear,r7500v2|\
- netgear,r7800|\
- netgear,xr450|\
- netgear,xr500|\
- qcom,ipq8064-ap148|\
- tplink,ad7200|\
- tplink,c2600|\
- tplink,vr2600v|\
- zyxel,nbg6817)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
- ucidef_set_network_device_conduit "lan1" "eth1"
- ucidef_set_network_device_conduit "lan2" "eth1"
- ucidef_set_network_device_conduit "lan3" "eth1"
- ucidef_set_network_device_conduit "lan4" "eth1"
- ucidef_set_network_device_conduit "wan" "eth0"
- ;;
- asus,onhub|\
- tplink,onhub)
- ucidef_set_interfaces_lan_wan "lan1" "wan"
- ucidef_set_network_device_conduit "lan1" "eth1"
- ucidef_set_network_device_conduit "wan" "eth0"
- ;;
- edgecore,ecw5410|\
- extreme,ap3935)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
- fortinet,fap-421e|\
- ignitenet,ss-w2-ac2600|\
- ubnt,unifi-ac-hd)
- ucidef_set_interface_lan "eth0 eth1"
- ;;
- meraki,mr42)
- ucidef_set_interface_lan "eth0"
- ;;
- meraki,mr52)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
- qcom,ipq8064-ap161)
- ucidef_set_interface_lan "eth1 eth2 lan1 lan2 lan3 lan4" "wan"
- ;;
- qcom,ipq8064-db149)
- ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan"
- ;;
- *)
- echo "Unsupported hardware. Network interfaces not intialized"
- ;;
- esac
- }
- ipq806x_setup_macs()
- {
- local board="$1"
- case "$board" in
- asrock,g10)
- hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
- ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
- hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
- ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 1)"
- ;;
- linksys,e8350-v1|\
- zyxel,nbg6817)
- hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
- ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
- ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
- ;;
- esac
- }
- board_config_update
- board=$(board_name)
- ipq806x_setup_macs $board
- ipq806x_setup_interfaces $board
- board_config_flush
- exit 0
|
