openwrt/target/linux/qualcommax/dts/ipq8072-haze.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

/dts-v1/;

#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "prpl Foundation Haze";
	compatible = "prpl,haze", "qcom,ipq8074";

	aliases {
		serial0 = &blsp1_uart5;
		/* Aliases are required by U-Boot to patch MAC addresses */
		ethernet0 = &dp6_syn;
		ethernet1 = &dp4;
		ethernet2 = &dp3;
		ethernet3 = &dp2;
		label-mac-device = &dp6_syn;
		led-boot = &led_system_blue;
		led-failsafe = &led_system_red;
		led-running = &led_system_green;
		led-upgrade = &led_system_blue;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		wps-button {
			label = "wps";
			gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset-button {
			label = "reset";
			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&tlmm {
	mdio_pins: mdio-state {
		mdc-pins {
			pins = "gpio68";
			function = "mdc";
			drive-strength = <8>;
			bias-pull-up;
		};

		mdio-pins {
			pins = "gpio69";
			function = "mdio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};

	button_pins: button-state {
		wps-pins {
			pins = "gpio42";
			function = "gpio";
			drive-strength = <8>;
			bias-pull-up;
		};

		rst-pins {
			pins = "gpio44";
			function = "gpio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};

	i2c_3_pins: i2c-3-state {
		pins = "gpio46", "gpio47";
		function = "blsp2_i2c";
		drive-strength = <8>;
		bias-disable;
	};
};

&blsp1_uart5 {
	status = "okay";
};

&prng {
	status = "okay";
};

&ssphy_0 {
	status = "okay";
};

&qusb_phy_0 {
	status = "okay";
};

&ssphy_1 {
	status = "okay";
};

&qusb_phy_1 {
	status = "okay";
};

&usb_0 {
	status = "okay";
};

&usb_1 {
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&crypto {
	status = "okay";
};

&qpic_bam {
	status = "okay";
};

&blsp1_spi1 { /* BLSP1 QUP1 */
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	status = "okay";

	flash@0 {
		reg = <0>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "qcom,smem-part";
		};
	};
};

&mdio {
	status = "okay";

	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
	reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;

	ethernet-phy-package@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "qcom,qca8075-package";
		reg = <0>;

		qca8075_0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
		};

		qca8075_1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
		};

		qca8075_2: ethernet-phy@2 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <2>;
		};

		qca8075_3: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;
		};
	};

	aqr113c: ethernet-phy@5 {
		compatible ="ethernet-phy-ieee802.3-c45";
		reg = <8>;
		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
	};
};

&sdhc_1 {
	status = "okay";

	vqmmc-supply = <&l11>;
};

&switch {
	status = "okay";

	switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
	switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
	switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
	switch_mac_mode1 = <MAC_MODE_10GBASE_R>; /* mac mode for uniphy instance1*/
	switch_mac_mode2 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance2*/

	qcom,port_phyinfo {
		port@1 {
			port_id = <1>;
			phy_address = <0>;
		};
		port@2 {
			port_id = <2>;
			phy_address = <1>;
		};
		port@3 {
			port_id = <3>;
			phy_address = <2>;
		};
		port@4 {
			port_id = <4>;
			phy_address = <3>;
		};
		port@6 {
			port_id = <6>;
			phy_address = <8>;
			compatible = "ethernet-phy-ieee802.3-c45";
			ethernet-phy-ieee802.3-c45;
		};
	};
};

&edma {
	status = "okay";
};

/* Dummy LAN port */
&dp1 {
	status = "disabled";
	phy-handle = <&qca8075_0>;
	label = "lan4";
};

&dp2 {
	status = "okay";
	phy-handle = <&qca8075_1>;
	label = "lan3";
};

&dp3 {
	status = "okay";
	phy-handle = <&qca8075_2>;
	label = "lan2";
};

&dp4 {
	status = "okay";
	phy-handle = <&qca8075_3>;
	label = "lan1";
};

&dp6_syn {
	status = "okay";
	qcom,mactype = <1>;
	phy-mode = "usxgmii";
	phy-handle = <&aqr113c>;
	label = "wan";
};

&pcie_qmp0 {
	status = "okay";
};

&pcie0 {
	status = "okay";

	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};

&pcie_qmp1 {
	status = "okay";
};

&pcie1 {
	status = "okay";

	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;

	pcie@0 {
		wifi@0,0 {
			status = "okay";

			/* ath11k has no DT compatible for PCI cards */
			compatible = "pci17cb,1104";
			reg = <0x00010000 0 0 0 0>;

			qcom,ath11k-calibration-variant = "prpl-Haze";
		};
	};
};

&wifi {
	status = "okay";

	qcom,ath11k-calibration-variant = "prpl-Haze";
};

&blsp1_i2c3{
	pinctrl-0 = <&i2c_3_pins>;
	pinctrl-names = "default";
	status = "okay";

	led-controller@30 {
		compatible = "ti,lp5562";
		reg = <0x30>;
		clock-mode = /bits/ 8 <2>;
		#address-cells = <1>;
		#size-cells = <0>;

		led_system_red: chan@0 {
			chan-name = "red";
			led-cur = /bits/ 8 <0x20>;
			max-cur = /bits/ 8 <0x60>;
			color = <LED_COLOR_ID_RED>;
			reg = <0>;
		};

		led_system_green: chan@1 {
			chan-name = "green";
			led-cur = /bits/ 8 <0x20>;
			max-cur = /bits/ 8 <0x60>;
			color = <LED_COLOR_ID_GREEN>;
			reg = <1>;
		};

		led_system_blue: chan@2 {
			chan-name = "blue";
			led-cur = /bits/ 8 <0x20>;
			max-cur = /bits/ 8 <0x60>;
			color = <LED_COLOR_ID_BLUE>;
			reg = <2>;
		};
	};
};