openwrt/package/kernel/linux/modules/iio.mk

#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

IIO_MENU:=Industrial I/O Modules


define KernelPackage/iio-core
  SUBMENU:=$(IIO_MENU)
  TITLE:=Industrial IO core
  DEPENDS:=+kmod-dma-buf
  KCONFIG:= \
	CONFIG_IIO \
	CONFIG_IIO_BUFFER=y \
	CONFIG_IIO_TRIGGER=y
  FILES:=$(LINUX_DIR)/drivers/iio/industrialio.ko
  AUTOLOAD:=$(call AutoLoad,55,industrialio)
endef

define KernelPackage/iio-core/description
 The industrial I/O subsystem provides a unified framework for
 drivers for many different types of embedded sensors using a
 number of different physical interfaces (i2c, spi, etc)
endef

$(eval $(call KernelPackage,iio-core))

define AddDepends/iio
  SUBMENU:=$(IIO_MENU)
  DEPENDS+=+kmod-iio-core $(1)
endef

define KernelPackage/iio-kfifo-buf
  TITLE:=Industrial I/O buffering based on kfifo
  KCONFIG:=CONFIG_IIO_KFIFO_BUF
  FILES:=$(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko
  AUTOLOAD:=$(call AutoLoad,55,kfifo_buf)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-kfifo-buf/description
 A simple fifo based on kfifo.  Note that this currently provides no buffer
 events so it is up to userspace to work out how often to read from the buffer.
endef

$(eval $(call KernelPackage,iio-kfifo-buf))


define KernelPackage/industrialio-backend
  TITLE:=IIO Backend support
  HIDDEN:=1
  KCONFIG=CONFIG_IIO_BACKEND
  FILES:=$(LINUX_DIR)/drivers/iio/industrialio-backend.ko
  AUTOLOAD:=$(call AutoProbe,industrialio-backend)
  $(call AddDepends/iio)
endef

define KernelPackage/industrialio-backend/description
  Framework to handle complex IIO aggregate devices. The typical
  architecture that can make use of this framework is to have one
  device as the frontend device which can be "linked" against one or
  multiple backend devices. The framework then makes it easy to get
  and control such backend devices.
endef

$(eval $(call KernelPackage,industrialio-backend))


define KernelPackage/industrialio-hw-consumer
  TITLE:=Provides a bonding way to an other device in hardware
  KCONFIG:=CONFIG_IIO_BUFFER_HW_CONSUMER
  FILES:=$(LINUX_DIR)/drivers/iio/buffer/industrialio-hw-consumer.ko
  AUTOLOAD:=$(call AutoLoad,55,industrialio-hw-consumer)
  $(call AddDepends/iio,+kmod-iio-kfifo-buf)
endef

define KernelPackage/industrialio-hw-consumer/description
 Provides a way to bonding when an IIO device has a direct connection
 to another device in hardware. In this case buffers for data transfers
 are handled by hardware.
endef

$(eval $(call KernelPackage,industrialio-hw-consumer))


define KernelPackage/industrialio-buffer-cb
  TITLE:=Provides callback buffer used for push in-kernel interfaces
  KCONFIG:=CONFIG_IIO_BUFFER_CB
  FILES:=$(LINUX_DIR)/drivers/iio/buffer/industrialio-buffer-cb.ko
  AUTOLOAD:=$(call AutoLoad,55,industrialio-triggered-buffer-cb)
  $(call AddDepends/iio)
endef

define KernelPackage/industrialio-buffer-cb/description
 Should be selected by any drivers that do in-kernel push usage.
endef

$(eval $(call KernelPackage,industrialio-buffer-cb))


define KernelPackage/industrialio-triggered-buffer
  TITLE:=Provides helper functions for setting up triggered buffers.
  DEPENDS:=+kmod-iio-kfifo-buf
  KCONFIG:=CONFIG_IIO_TRIGGERED_BUFFER
  FILES:=$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko
  AUTOLOAD:=$(call AutoLoad,55,industrialio-triggered-buffer)
  $(call AddDepends/iio)
endef

define KernelPackage/industrialio-triggered-buffer/description
 Provides helper functions for setting up triggered buffers.
endef

$(eval $(call KernelPackage,industrialio-triggered-buffer))


define KernelPackage/iio-ad799x
  DEPENDS:=+kmod-i2c-core +kmod-industrialio-triggered-buffer
  TITLE:=Analog Devices AD799x ADC driver
  KCONFIG:= \
	CONFIG_AD799X_RING_BUFFER=y \
	CONFIG_AD799X
  FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
  AUTOLOAD:=$(call AutoLoad,56,ad799x)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-ad799x/description
 support for Analog Devices:
 ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
 i2c analog to digital converters (ADC).
endef

$(eval $(call KernelPackage,iio-ad799x))

define KernelPackage/iio-ads1015
  DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-industrialio-triggered-buffer
  TITLE:=Texas Instruments ADS1015 ADC driver
  KCONFIG:= CONFIG_TI_ADS1015
  FILES:=$(LINUX_DIR)/drivers/iio/adc/ti-ads1015.ko
  AUTOLOAD:=$(call AutoLoad,56,ti-ads1015)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-ads1015/description
 This driver adds support for Texas Instruments ADS1015 and ADS1115 ADCs.
endef

$(eval $(call KernelPackage,iio-ads1015))

define KernelPackage/iio-mcp3422
  TITLE:=Microchip MCP342x ADC driver
  KCONFIG:=CONFIG_MCP3422
  FILES:=$(LINUX_DIR)/drivers/iio/adc/mcp3422.ko
  AUTOLOAD:=$(call AutoProbe,mcp3422)
  $(call AddDepends/iio, +kmod-i2c-core)
endef

define KernelPackage/iio-mcp3422/description
  Kernel module for the Microchip MCP342x I2C ADCs.
endef

$(eval $(call KernelPackage,iio-mcp3422))

define KernelPackage/iio-hmc5843
  DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-industrialio-triggered-buffer
  TITLE:=Honeywell HMC58x3 Magnetometer
  KCONFIG:= CONFIG_SENSORS_HMC5843_I2C
  FILES:= \
      $(LINUX_DIR)/drivers/iio/magnetometer/hmc5843_i2c.ko \
      $(LINUX_DIR)/drivers/iio/magnetometer/hmc5843_core.ko
  AUTOLOAD:=$(call AutoLoad,56,hmc5843)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-hmc5843/description
  Honeywell HMC5843/5883/5883L 3-Axis Magnetometer
endef

$(eval $(call KernelPackage,iio-hmc5843))

define KernelPackage/iio-bh1750
  DEPENDS:=+kmod-i2c-core
  TITLE:=ROHM BH1750 ambient light sensor
  KCONFIG:= CONFIG_BH1750
  FILES:=$(LINUX_DIR)/drivers/iio/light/bh1750.ko
  AUTOLOAD:=$(call AutoLoad,56,bh1750)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-bh1750/description
  ROHM BH1750 ambient light sensor (i2c bus)
endef
$(eval $(call KernelPackage,iio-bh1750))

define KernelPackage/iio-am2315
  DEPENDS:=+kmod-i2c-core +kmod-industrialio-triggered-buffer
  TITLE:=Asong AM2315 humidity/temperature sensor
  KCONFIG:= CONFIG_AM2315
  FILES:=$(LINUX_DIR)/drivers/iio/humidity/am2315.ko
  AUTOLOAD:=$(call AutoLoad,56,am2315)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-am2315/description
  Aosong AM2315 humidity/temperature sensor (I2C bus)
endef
$(eval $(call KernelPackage,iio-am2315))

define KernelPackage/iio-mxs-lradc
  DEPENDS:=@TARGET_mxs +kmod-industrialio-triggered-buffer
  TITLE:=Freescale i.MX23/i.MX28 LRADC ADC driver
  KCONFIG:= \
	CONFIG_MXS_LRADC_ADC
  FILES:=$(LINUX_DIR)/drivers/iio/adc/mxs-lradc-adc.ko
  AUTOLOAD:=$(call AutoLoad,56,mxs-lradc-adc)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-mxs-lradc/description
 Support for Freescale's i.MX23/i.MX28 SoC internal Low-Resolution ADC
endef

$(eval $(call KernelPackage,iio-mxs-lradc))

define KernelPackage/iio-dht11
  DEPENDS:=@GPIO_SUPPORT @USES_DEVICETREE
  TITLE:=DHT11 (and compatible) humidity and temperature sensors
  KCONFIG:= \
	CONFIG_DHT11
  FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
  AUTOLOAD:=$(call AutoLoad,56,dht11)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-dht11/description
 support for DHT11 and DHT22 digitial humidity and temperature sensors
 attached at GPIO lines. You will need a custom device tree file to
 specify the GPIO line to use.
endef

$(eval $(call KernelPackage,iio-dht11))


define KernelPackage/iio-bme680
  TITLE:=BME680 gas/humidity/pressure/temperature sensor
  DEPENDS:=+kmod-regmap-core
  KCONFIG:=CONFIG_BME680
  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_core.ko
  $(call AddDepends/iio)
endef

define KernelPackage/iio-bme680/description
 This driver adds support for Bosch Sensortec BME680 sensor with gas,
 humidity, pressure and temperatue sensing capability.
endef

$(eval $(call KernelPackage,iio-bme680))

define KernelPackage/iio-bme680-i2c
  TITLE:=BME680 gas/humidity/pressure/temperature sensor (I2C)
  DEPENDS:=+kmod-iio-bme680 +kmod-regmap-i2c
  KCONFIG:=CONFIG_BME680_I2C
  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_i2c.ko
  AUTOLOAD:=$(call AutoProbe,bme680-i2c)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-bme680-i2c/description
 This driver adds support for Bosch Sensortec's BME680 connected via I2C.
endef

$(eval $(call KernelPackage,iio-bme680-i2c))

define KernelPackage/iio-bme680-spi
  TITLE:=BME680 gas/humidity/pressure/temperature sensor (SPI)
  DEPENDS:=+kmod-iio-bme680 +kmod-regmap-spi
  KCONFIG:=CONFIG_BME680_SPI
  FILES:=$(LINUX_DIR)/drivers/iio/chemical/bme680_spi.ko
  AUTOLOAD:=$(call AutoProbe,bme680-spi)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-bme680-spi/description
 This driver adds support for Bosch Sensortec's BME680 connected via SPI.
endef

$(eval $(call KernelPackage,iio-bme680-spi))


define KernelPackage/iio-bmp280
  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor
  DEPENDS:=+kmod-regmap-core +kmod-industrialio-triggered-buffer
  KCONFIG:=CONFIG_BMP280
  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280.ko
  $(call AddDepends/iio)
endef

define KernelPackage/iio-bmp280/description
 This driver adds support for Bosch Sensortec BMP180 and BMP280 pressure and
 temperature sensors. Also supports the BME280 with an additional humidity
 sensor channel.
endef

$(eval $(call KernelPackage,iio-bmp280))


define KernelPackage/iio-bmp280-i2c
  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor (I2C)
  DEPENDS:=+kmod-iio-bmp280 +kmod-i2c-core +kmod-regmap-i2c
  KCONFIG:=CONFIG_BMP280_I2C
  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280-i2c.ko
  AUTOLOAD:=$(call AutoProbe,bmp280-i2c)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-bmp280-i2c/description
 This driver adds support for Bosch Sensortec's digital pressure and
 temperature sensor connected via I2C.
endef

$(eval $(call KernelPackage,iio-bmp280-i2c))


define KernelPackage/iio-bmp280-spi
  TITLE:=BMP180/BMP280/BME280 pressure/temperatur sensor (SPI)
  DEPENDS:=+kmod-iio-bmp280 +kmod-spi-bitbang
  KCONFIG:=CONFIG_BMP280_SPI
  FILES:=$(LINUX_DIR)/drivers/iio/pressure/bmp280-spi.ko
  AUTOLOAD:=$(call AutoProbe,bmp280-spi)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-bmp280-spi/description
 This driver adds support for Bosch Sensortec's digital pressure and
 temperature sensor connected via SPI.
endef

$(eval $(call KernelPackage,iio-bmp280-spi))


define KernelPackage/iio-dps310
  TITLE:=DPS310/DPS368/DPS422 pressure temperatur sensor
  DEPENDS:=+kmod-regmap-i2c
  KCONFIG:=CONFIG_DPS310
  FILES:=$(LINUX_DIR)/drivers/iio/pressure/dps310.ko
  AUTOLOAD:=$(call AutoProbe,dps310)
  $(call AddDepends/iio)
endef
define KernelPackage/iio-dps310/description
  Kernel module for Infineon DPS310/DPS368/DPS422 pressure and
  temperature I2C sensor.
endef

$(eval $(call KernelPackage,iio-dps310))


define KernelPackage/iio-htu21
  DEPENDS:=+kmod-i2c-core
  TITLE:=HTU21 humidity & temperature sensor
  KCONFIG:= \
       CONFIG_HTU21 \
       CONFIG_IIO_MS_SENSORS_I2C
  FILES:= \
       $(LINUX_DIR)/drivers/iio/humidity/htu21.ko \
       $(LINUX_DIR)/drivers/iio/common/ms_sensors/ms_sensors_i2c.ko
  AUTOLOAD:=$(call AutoLoad,56,htu21)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-htu21/description
 support for the Measurement Specialties HTU21 humidity and
 temperature sensor.
 This driver is also used for MS8607 temperature, pressure & humidity
 sensor
endef

$(eval $(call KernelPackage,iio-htu21))


define KernelPackage/iio-ccs811
  DEPENDS:=+kmod-i2c-core +kmod-industrialio-triggered-buffer
  TITLE:=AMS CCS811 VOC sensor
  KCONFIG:= \
	CONFIG_CCS811
  FILES:= $(LINUX_DIR)/drivers/iio/chemical/ccs811.ko
  AUTOLOAD:=$(call AutoLoad,56,ccs811)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-ccs811/description
  Support for the AMS CCS811 VOC (Volatile Organic Compounds) sensor
endef

$(eval $(call KernelPackage,iio-ccs811))


define KernelPackage/iio-si7020
  DEPENDS:=+kmod-i2c-core
  TITLE:=Silicon Labs Si7020 sensor
  KCONFIG:= CONFIG_SI7020
  FILES:=$(LINUX_DIR)/drivers/iio/humidity/si7020.ko
  AUTOLOAD:=$(call AutoLoad,56,si7020)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-si7020/description
 Support for Silicon Labs Si7020 family of relative humidity and
 temperature sensors connected via I2C. Following models are usable:
 Si7013, Si7020, Si7021, Hoperf TH06.
endef

$(eval $(call KernelPackage,iio-si7020))


define KernelPackage/iio-st_accel
  TITLE:=STMicroelectronics accelerometer 3-Axis Driver
  DEPENDS:=+kmod-regmap-core +kmod-industrialio-triggered-buffer
  KCONFIG:= \
	CONFIG_IIO_ST_ACCEL_3AXIS \
	CONFIG_IIO_ST_SENSORS_CORE
  FILES:= \
	$(LINUX_DIR)/drivers/iio/accel/st_accel.ko \
	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors.ko
  $(call AddDepends/iio)
endef

define KernelPackage/iio-st_accel/description
 This package adds support for STMicroelectronics accelerometers:
  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
  LNG2DM, LIS3DE, LIS2DE12
endef

$(eval $(call KernelPackage,iio-st_accel))


define KernelPackage/iio-st_accel-i2c
  TITLE:=STMicroelectronics accelerometer 3-Axis Driver (I2C)
  DEPENDS:=+kmod-iio-st_accel +kmod-i2c-core +kmod-regmap-i2c
  KCONFIG:= CONFIG_IIO_ST_ACCEL_I2C_3AXIS
  FILES:= \
	$(LINUX_DIR)/drivers/iio/accel/st_accel_i2c.ko \
	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors_i2c.ko
  AUTOLOAD:=$(call AutoLoad,56,st_accel_i2c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-st_accel-i2c/description
 This package adds support for STMicroelectronics I2C based accelerometers
endef

$(eval $(call KernelPackage,iio-st_accel-i2c))


define KernelPackage/iio-st_accel-spi
  TITLE:=STMicroelectronics accelerometer 3-Axis Driver (SPI)
  DEPENDS:=+kmod-iio-st_accel +kmod-regmap-spi
  KCONFIG:= CONFIG_IIO_ST_ACCEL_SPI_3AXIS
  FILES:= \
	$(LINUX_DIR)/drivers/iio/accel/st_accel_spi.ko \
	$(LINUX_DIR)/drivers/iio/common/st_sensors/st_sensors_spi.ko
  AUTOLOAD:=$(call AutoLoad,56,st_accel_spi)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-st_accel-spi/description
 This package adds support for STMicroelectronics SPI based accelerometers
endef

$(eval $(call KernelPackage,iio-st_accel-spi))


define KernelPackage/iio-lsm6dsx
  DEPENDS:=+kmod-iio-kfifo-buf +kmod-regmap-core +kmod-industrialio-triggered-buffer
  TITLE:=ST LSM6DSx driver for IMU MEMS sensors
  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.ko
  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-lsm6dsx/description
 Support for the ST LSM6DSx and related IMU MEMS sensors.
endef

$(eval $(call KernelPackage,iio-lsm6dsx))


define KernelPackage/iio-lsm6dsx-i2c
  DEPENDS:=+kmod-iio-lsm6dsx +kmod-i2c-core +kmod-regmap-i2c
  TITLE:=ST LSM6DSx driver for IMU MEMS sensors (I2C)
  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.ko
  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx-i2c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-lsm6dsx-i2c/description
 Support for the ST LSM6DSx and related IMU MEMS I2C sensors.
endef

$(eval $(call KernelPackage,iio-lsm6dsx-i2c))


define KernelPackage/iio-lsm6dsx-spi
  DEPENDS:=+kmod-iio-lsm6dsx +kmod-regmap-spi
  TITLE:=ST LSM6DSx driver for IMU MEMS sensors (SPI)
  KCONFIG:=CONFIG_IIO_ST_LSM6DSX
  FILES:=$(LINUX_DIR)/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.ko
  AUTOLOAD:=$(call AutoProbe,st_lsm6dsx-spi)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-lsm6dsx-spi/description
 Support for the ST LSM6DSx and related IMU MEMS SPI sensors.
endef

$(eval $(call KernelPackage,iio-lsm6dsx-spi))


define KernelPackage/iio-sps30
  DEPENDS:=+kmod-i2c-core +kmod-industrialio-triggered-buffer +kmod-lib-crc8
  TITLE:=Sensirion SPS30 particulate matter sensor
  KCONFIG:= \
	CONFIG_SPS30 \
	CONFIG_SPS30_I2C
  FILES:= \
	$(LINUX_DIR)/drivers/iio/chemical/sps30.ko \
	$(LINUX_DIR)/drivers/iio/chemical/sps30_i2c.ko
  AUTOLOAD:=$(call AutoProbe,sps30 sps30_i2c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-sps30/description
 Support for the Sensirion SPS30 particulate matter sensor.
endef

$(eval $(call KernelPackage,iio-sps30))


define KernelPackage/iio-tsl4531
  DEPENDS:=+kmod-i2c-core
  TITLE:=TAOS TSL4531 ambient light sensor
  KCONFIG:= CONFIG_TSL4531
  FILES:=$(LINUX_DIR)/drivers/iio/light/tsl4531.ko
  AUTOLOAD:=$(call AutoLoad,56,tsl4531)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-tsl4531/description
 Support for TAOS TSL4531x family of ambient light sensors
 connected via I2C. Following models are usable:
 TSL45311, TSL45313, TSL45315, TSL45317.
endef

$(eval $(call KernelPackage,iio-tsl4531))


define KernelPackage/iio-fxas21002c
  TITLE:=Freescale FXAS21002C 3-axis gyro driver
  DEPENDS:=+kmod-regmap-core +kmod-industrialio-triggered-buffer
  KCONFIG:= CONFIG_FXAS21002C
  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_core.ko
  AUTOLOAD:=$(call AutoLoad,56,fxas21002c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxas21002c/description
 Support for Freescale FXAS21002C 3-axis gyro.
endef

$(eval $(call KernelPackage,iio-fxas21002c))


define KernelPackage/iio-fxas21002c-i2c
  TITLE:=Freescale FXAS21002C 3-axis gyro driver (I2C)
  DEPENDS:=+kmod-iio-fxas21002c +kmod-i2c-core +kmod-regmap-i2c
  KCONFIG:= CONFIG_FXAS21002C_I2C
  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_i2c.ko
  AUTOLOAD:=$(call AutoLoad,56,fxas21002c_i2c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxas21002c-i2c/description
 Support for Freescale FXAS21002C 3-axis gyro
 connected via I2C.
endef


$(eval $(call KernelPackage,iio-fxas21002c-i2c))

define KernelPackage/iio-fxas21002c-spi
  DEPENDS:=+kmod-iio-fxas21002c +kmod-regmap-spi
  TITLE:=Freescale FXAS21002C 3-axis gyro driver (SPI)
  KCONFIG:= CONFIG_FXAS21002C_SPI
  FILES:=$(LINUX_DIR)/drivers/iio/gyro/fxas21002c_spi.ko
  AUTOLOAD:=$(call AutoLoad,56,fxas21002c_spi)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxas21002c-spi/description
 Support for Freescale FXAS21002C 3-axis gyro
 connected via SPI.
endef

$(eval $(call KernelPackage,iio-fxas21002c-spi))


define KernelPackage/iio-fxos8700
  TITLE:=Freescale FXOS8700 3-axis accelerometer driver
  DEPENDS:=+kmod-regmap-core
  KCONFIG:= CONFIG_FXOS8700
  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_core.ko
  AUTOLOAD:=$(call AutoLoad,56,fxos8700)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxos8700/description
 Support for Freescale FXOS8700 3-axis accelerometer.
endef

$(eval $(call KernelPackage,iio-fxos8700))


define KernelPackage/iio-fxos8700-i2c
  TITLE:=Freescale FXOS8700 3-axis acceleromter driver (I2C)
  DEPENDS:=+kmod-iio-fxos8700 +kmod-i2c-core +kmod-regmap-i2c
  KCONFIG:= CONFIG_FXOS8700_I2C
  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_i2c.ko
  AUTOLOAD:=$(call AutoLoad,56,fxos8700_i2c)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxos8700-i2c/description
 Support for Freescale FXOS8700 3-axis accelerometer
 connected via I2C.
endef


$(eval $(call KernelPackage,iio-fxos8700-i2c))

define KernelPackage/iio-fxos8700-spi
  DEPENDS:=+kmod-iio-fxos8700 +kmod-regmap-spi
  TITLE:=Freescale FXOS8700 3-axis accelerometer driver (SPI)
  KCONFIG:= CONFIG_FXOS8700_SPI
  FILES:=$(LINUX_DIR)/drivers/iio/imu/fxos8700_spi.ko
  AUTOLOAD:=$(call AutoLoad,56,fxos8700_spi)
  $(call AddDepends/iio)
endef

define KernelPackage/iio-fxos8700-spi/description
 Support for Freescale FXOS8700 3-axis accelerometer
 connected via SPI.
endef

$(eval $(call KernelPackage,iio-fxos8700-spi))

define KernelPackage/iio-ti-am335x-adc
  TITLE:= TI Sitara AM335x ADC driver
  DEPENDS:=@TARGET_omap
  KCONFIG:=CONFIG_TI_AM335X_ADC
  FILES:=$(LINUX_DIR)/drivers/iio/adc/ti_am335x_adc.ko
  AUTOLOAD:=$(call AutoProbe,ti_am335x_adc)
  $(call AddDepends/iio,+kmod-iio-kfifo-buf)
endef
define KernelPackage/iio-ti-am335x-adc/description
 Driver for the TI AM335x ADC.
endef

$(eval $(call KernelPackage,iio-ti-am335x-adc))