util/eventbus: rework to have a Client abstraction

The Client carries both publishers and subscribers for a single
actor. This makes the APIs for publish and subscribe look more
similar, and this structure is a better fit for upcoming debug
facilities.

Updates #15160

Signed-off-by: David Anderson <[email protected]>

util/eventbus/bus.go

@@ -20,12 +20,11 @@ type Bus struct {
 	snapshot chan chan []any
 
 	topicsMu sync.Mutex // guards everything below.
-	topics   map[reflect.Type][]*Queue
+	topics   map[reflect.Type][]*subscribeState
 
 	// Used for introspection/debugging only, not in the normal event
 	// publishing path.
-	publishers set.Set[publisher]
-	queues     set.Set[*Queue]
+	clients set.Set[*Client]
 }
 
 // New returns a new bus. Use [PublisherOf] to make event publishers,
@@ -33,17 +32,53 @@ type Bus struct {
 func New() *Bus {
 	stopCtl, stopWorker := newGoroutineShutdown()
 	ret := &Bus{
-		write:      make(chan any),
-		stop:       stopCtl,
-		snapshot:   make(chan chan []any),
-		topics:     map[reflect.Type][]*Queue{},
-		publishers: set.Set[publisher]{},
-		queues:     set.Set[*Queue]{},
+		write:    make(chan any),
+		stop:     stopCtl,
+		snapshot: make(chan chan []any),
+		topics:   map[reflect.Type][]*subscribeState{},
+		clients:  set.Set[*Client]{},
 	}
 	go ret.pump(stopWorker)
 	return ret
 }
 
+// Client returns a new client with no subscriptions. Use [Subscribe]
+// to receive events, and [Publish] to emit events.
+//
+// The client's name is used only for debugging, to tell humans what
+// piece of code a publisher/subscriber belongs to. Aim for something
+// short but unique, for example "kernel-route-monitor" or "taildrop",
+// not "watcher".
+func (b *Bus) Client(name string) *Client {
+	ret := &Client{
+		name: name,
+		bus:  b,
+		pub:  set.Set[publisher]{},
+	}
+	b.topicsMu.Lock()
+	defer b.topicsMu.Unlock()
+	b.clients.Add(ret)
+	return ret
+}
+
+// Close closes the bus. Implicitly closes all clients, publishers and
+// subscribers attached to the bus.
+//
+// Close blocks until the bus is fully shut down. The bus is
+// permanently unusable after closing.
+func (b *Bus) Close() {
+	b.stop.StopAndWait()
+
+	var clients set.Set[*Client]
+	b.topicsMu.Lock()
+	clients, b.clients = b.clients, set.Set[*Client]{}
+	b.topicsMu.Unlock()
+
+	for c := range clients {
+		c.Close()
+	}
+}
+
 func (b *Bus) pump(stop goroutineShutdownWorker) {
 	defer stop.Done()
 	var vals queue
@@ -98,13 +133,19 @@ func (b *Bus) pump(stop goroutineShutdownWorker) {
 	}
 }
 
-func (b *Bus) dest(t reflect.Type) []*Queue {
+func (b *Bus) dest(t reflect.Type) []*subscribeState {
 	b.topicsMu.Lock()
 	defer b.topicsMu.Unlock()
 	return b.topics[t]
 }
 
-func (b *Bus) subscribe(t reflect.Type, q *Queue) (cancel func()) {
+func (b *Bus) shouldPublish(t reflect.Type) bool {
+	b.topicsMu.Lock()
+	defer b.topicsMu.Unlock()
+	return len(b.topics[t]) > 0
+}
+
+func (b *Bus) subscribe(t reflect.Type, q *subscribeState) (cancel func()) {
 	b.topicsMu.Lock()
 	defer b.topicsMu.Unlock()
 	b.topics[t] = append(b.topics[t], q)
@@ -113,7 +154,7 @@ func (b *Bus) subscribe(t reflect.Type, q *Queue) (cancel func()) {
 	}
 }
 
-func (b *Bus) unsubscribe(t reflect.Type, q *Queue) {
+func (b *Bus) unsubscribe(t reflect.Type, q *subscribeState) {
 	b.topicsMu.Lock()
 	defer b.topicsMu.Unlock()
 	// Topic slices are accessed by pump without holding a lock, so we
@@ -127,44 +168,6 @@ func (b *Bus) unsubscribe(t reflect.Type, q *Queue) {
 	b.topics[t] = slices.Delete(slices.Clone(b.topics[t]), i, i+1)
 }
 
-func (b *Bus) Close() {
-	b.stop.StopAndWait()
-}
-
-// Queue returns a new queue with no subscriptions. Use [Subscribe] to
-// atach subscriptions to it.
-//
-// The queue's name should be a short, human-readable string that
-// identifies this queue. The name is only visible through debugging
-// APIs.
-func (b *Bus) Queue(name string) *Queue {
-	return newQueue(b, name)
-}
-
-func (b *Bus) addQueue(q *Queue) {
-	b.topicsMu.Lock()
-	defer b.topicsMu.Unlock()
-	b.queues.Add(q)
-}
-
-func (b *Bus) deleteQueue(q *Queue) {
-	b.topicsMu.Lock()
-	defer b.topicsMu.Unlock()
-	b.queues.Delete(q)
-}
-
-func (b *Bus) addPublisher(p publisher) {
-	b.topicsMu.Lock()
-	defer b.topicsMu.Unlock()
-	b.publishers.Add(p)
-}
-
-func (b *Bus) deletePublisher(p publisher) {
-	b.topicsMu.Lock()
-	defer b.topicsMu.Unlock()
-	b.publishers.Delete(p)
-}
-
 func newGoroutineShutdown() (goroutineShutdownControl, goroutineShutdownWorker) {
 	ctx, cancel := context.WithCancel(context.Background())
 

util/eventbus/bus_test.go

@@ -26,14 +26,16 @@ func TestBus(t *testing.T) {
 	b := eventbus.New()
 	defer b.Close()
 
-	q := b.Queue("TestBus")
-	defer q.Close()
-	s := eventbus.Subscribe[EventA](q)
+	c := b.Client("TestSub")
+	defer c.Close()
+	s := eventbus.Subscribe[EventA](c)
 
 	go func() {
-		pa := eventbus.PublisherOf[EventA](b, "TestBusA")
+		p := b.Client("TestPub")
+		defer p.Close()
+		pa := eventbus.Publish[EventA](p)
 		defer pa.Close()
-		pb := eventbus.PublisherOf[EventB](b, "TestBusB")
+		pb := eventbus.Publish[EventB](p)
 		defer pb.Close()
 		pa.Publish(EventA{1})
 		pb.Publish(EventB{2})
@@ -45,7 +47,7 @@ func TestBus(t *testing.T) {
 		select {
 		case got := <-s.Events():
 			want.Got(got)
-		case <-q.Done():
+		case <-s.Done():
 			t.Fatalf("queue closed unexpectedly")
 		case <-time.After(time.Second):
 			t.Fatalf("timed out waiting for event")
@@ -57,19 +59,21 @@ func TestBusMultipleConsumers(t *testing.T) {
 	b := eventbus.New()
 	defer b.Close()
 
-	q1 := b.Queue("TestBusA")
-	defer q1.Close()
-	s1 := eventbus.Subscribe[EventA](q1)
+	c1 := b.Client("TestSubA")
+	defer c1.Close()
+	s1 := eventbus.Subscribe[EventA](c1)
 
-	q2 := b.Queue("TestBusAB")
-	defer q2.Close()
-	s2A := eventbus.Subscribe[EventA](q2)
-	s2B := eventbus.Subscribe[EventB](q2)
+	c2 := b.Client("TestSubB")
+	defer c2.Close()
+	s2A := eventbus.Subscribe[EventA](c2)
+	s2B := eventbus.Subscribe[EventB](c2)
 
 	go func() {
-		pa := eventbus.PublisherOf[EventA](b, "TestBusA")
+		p := b.Client("TestPub")
+		defer p.Close()
+		pa := eventbus.Publish[EventA](p)
 		defer pa.Close()
-		pb := eventbus.PublisherOf[EventB](b, "TestBusB")
+		pb := eventbus.Publish[EventB](p)
 		defer pb.Close()
 		pa.Publish(EventA{1})
 		pb.Publish(EventB{2})
@@ -86,9 +90,11 @@ func TestBusMultipleConsumers(t *testing.T) {
 			wantB.Got(got)
 		case got := <-s2B.Events():
 			wantB.Got(got)
-		case <-q1.Done():
+		case <-s1.Done():
 			t.Fatalf("queue closed unexpectedly")
-		case <-q2.Done():
+		case <-s2A.Done():
+			t.Fatalf("queue closed unexpectedly")
+		case <-s2B.Done():
 			t.Fatalf("queue closed unexpectedly")
 		case <-time.After(time.Second):
 			t.Fatalf("timed out waiting for event")
@@ -111,15 +117,15 @@ func TestSpam(t *testing.T) {
 
 	received := make([][]EventA, subscribers)
 	for i := range subscribers {
-		q := b.Queue(fmt.Sprintf("Subscriber%d", i))
-		defer q.Close()
-		s := eventbus.Subscribe[EventA](q)
+		c := b.Client(fmt.Sprintf("Subscriber%d", i))
+		defer c.Close()
+		s := eventbus.Subscribe[EventA](c)
 		g.Go(func() error {
 			for range wantEvents {
 				select {
 				case evt := <-s.Events():
 					received[i] = append(received[i], evt)
-				case <-q.Done():
+				case <-s.Done():
 					t.Errorf("queue done before expected number of events received")
 					return errors.New("queue prematurely closed")
 				case <-time.After(5 * time.Second):
@@ -134,7 +140,8 @@ func TestSpam(t *testing.T) {
 	published := make([][]EventA, publishers)
 	for i := range publishers {
 		g.Run(func() {
-			p := eventbus.PublisherOf[EventA](b, fmt.Sprintf("Publisher%d", i))
+			c := b.Client(fmt.Sprintf("Publisher%d", i))
+			p := eventbus.Publish[EventA](c)
 			for j := range eventsPerPublisher {
 				evt := EventA{i*eventsPerPublisher + j}
 				p.Publish(evt)

util/eventbus/client.go

@@ -0,0 +1,100 @@
+// Copyright (c) Tailscale Inc & AUTHORS
+// SPDX-License-Identifier: BSD-3-Clause
+
+package eventbus
+
+import (
+	"reflect"
+	"sync"
+
+	"tailscale.com/util/set"
+)
+
+// A Client can publish and subscribe to events on its attached
+// bus. See [Publish] to publish events, and [Subscribe] to receive
+// events.
+//
+// Subscribers that share the same client receive events one at a
+// time, in the order they were published.
+type Client struct {
+	name string
+	bus  *Bus
+
+	mu  sync.Mutex
+	pub set.Set[publisher]
+	sub *subscribeState // Lazily created on first subscribe
+}
+
+// Close closes the client. Implicitly closes all publishers and
+// subscribers obtained from this client.
+func (c *Client) Close() {
+	var (
+		pub set.Set[publisher]
+		sub *subscribeState
+	)
+
+	c.mu.Lock()
+	pub, c.pub = c.pub, nil
+	sub, c.sub = c.sub, nil
+	c.mu.Unlock()
+
+	if sub != nil {
+		sub.close()
+	}
+	for p := range pub {
+		p.Close()
+	}
+}
+
+func (c *Client) subscribeState() *subscribeState {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if c.sub == nil {
+		c.sub = newSubscribeState(c)
+	}
+	return c.sub
+}
+
+func (c *Client) addPublisher(pub publisher) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.pub.Add(pub)
+}
+
+func (c *Client) deletePublisher(pub publisher) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.pub.Delete(pub)
+}
+
+func (c *Client) addSubscriber(t reflect.Type, s *subscribeState) {
+	c.bus.subscribe(t, s)
+}
+
+func (c *Client) deleteSubscriber(t reflect.Type, s *subscribeState) {
+	c.bus.unsubscribe(t, s)
+}
+
+func (c *Client) publish() chan<- any {
+	return c.bus.write
+}
+
+func (c *Client) shouldPublish(t reflect.Type) bool {
+	return c.bus.shouldPublish(t)
+}
+
+// Subscribe requests delivery of events of type T through the given
+// Queue. Panics if the queue already has a subscriber for T.
+func Subscribe[T any](c *Client) *Subscriber[T] {
+	return newSubscriber[T](c.subscribeState())
+}
+
+// Publisher returns a publisher for event type T using the given
+// client.
+func Publish[T any](c *Client) *Publisher[T] {
+	ret := newPublisher[T](c)
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.pub.Add(ret)
+	return ret
+}

util/eventbus/doc.go

@@ -3,56 +3,59 @@
 
 // Package eventbus provides an in-process event bus.
 //
-// The event bus connects publishers of typed events with subscribers
-// interested in those events.
+// An event bus connects publishers of typed events with subscribers
+// interested in those events. Typically, there is one global event
+// bus per process.
 //
 // # Usage
 //
-// To publish events, use [PublisherOf] to get a typed publisher for
-// your event type, then call [Publisher.Publish] as needed. If your
-// event is expensive to construct, you can optionally use
-// [Publisher.ShouldPublish] to skip the work if nobody is listening
-// for the event.
+// To send or receive events, first use [Bus.Client] to register with
+// the bus. Clients should register with a human-readable name that
+// identifies the code using the client, to aid in debugging.
 //
-// To receive events, first use [Bus.Queue] to create an event
-// delivery queue, then use [Subscribe] to get a [Subscriber] for each
-// event type you're interested in. Receive the events themselves by
-// selecting over all your [Subscriber.Chan] channels, as well as
-// [Queue.Done] for shutdown notifications.
+// To publish events, use [Publish] on a Client to get a typed
+// publisher for your event type, then call [Publisher.Publish] as
+// needed. If your event is expensive to construct, you can optionally
+// use [Publisher.ShouldPublish] to skip the work if nobody is
+// listening for the event.
+//
+// To receive events, use [Subscribe] to get a typed subscriber for
+// each event type you're interested in. Receive the events themselves
+// by selecting over all your [Subscriber.Events] channels, as well as
+// [Subscriber.Done] for shutdown notifications.
 //
 // # Concurrency properties
 //
-// The bus serializes all published events, and preserves that
-// ordering when delivering to subscribers that are attached to the
-// same Queue. In more detail:
+// The bus serializes all published events across all publishers, and
+// preserves that ordering when delivering to subscribers that are
+// attached to the same Client. In more detail:
 //
 //   - An event is published to the bus at some instant between the
 //     start and end of the call to [Publisher.Publish].
-//   - Events cannot be published at the same instant, and so are
+//   - Two events cannot be published at the same instant, and so are
 //     totally ordered by their publication time. Given two events E1
 //     and E2, either E1 happens before E2, or E2 happens before E1.
-//   - Queues dispatch events to their Subscribers in publication
-//     order: if E1 happens before E2, the queue always delivers E1
+//   - Clients dispatch events to their Subscribers in publication
+//     order: if E1 happens before E2, the client always delivers E1
 //     before E2.
-//   - Queues do not synchronize with each other: given queues Q1 and
-//     Q2, both subscribed to events E1 and E2, Q1 may deliver both E1
-//     and E2 before Q2 delivers E1.
+//   - Clients do not synchronize subscriptions with each other: given
+//     clients C1 and C2, both subscribed to events E1 and E2, C1 may
+//     deliver both E1 and E2 before C2 delivers E1.
 //
 // Less formally: there is one true timeline of all published events.
-// If you make a Queue and subscribe to events on it, you will receive
-// those events one at a time, in the same order as the one true
+// If you make a Client and subscribe to events, you will receive
+// events one at a time, in the same order as the one true
 // timeline. You will "skip over" events you didn't subscribe to, but
 // your view of the world always moves forward in time, never
 // backwards, and you will observe events in the same order as
 // everyone else.
 //
-// However, you cannot assume that what your subscribers on your queue
-// see as "now" is the same as what other subscribers on other
-// queues. Their queue may be further behind you in the timeline, or
-// running ahead of you. This means you should be careful about
-// reaching out to another component directly after receiving an
-// event, as its view of the world may not yet (or ever) be exactly
-// consistent with yours.
+// However, you cannot assume that what your client see as "now" is
+// the same as what other clients. They may be further behind you in
+// working through the timeline, or running ahead of you. This means
+// you should be careful about reaching out to another component
+// directly after receiving an event, as its view of the world may not
+// yet (or ever) be exactly consistent with yours.
 //
 // To make your code more testable and understandable, you should try
 // to structure it following the actor model: you have some local
@@ -63,7 +66,7 @@
 // # Expected subscriber behavior
 //
 // Subscribers are expected to promptly receive their events on
-// [Subscriber.Chan]. The bus has a small, fixed amount of internal
+// [Subscriber.Events]. The bus has a small, fixed amount of internal
 // buffering, meaning that a slow subscriber will eventually cause
 // backpressure and block publication of all further events.
 //

util/eventbus/publish.go

@@ -11,35 +11,41 @@ import (
 // publisher is a uniformly typed wrapper around Publisher[T], so that
 // debugging facilities can look at active publishers.
 type publisher interface {
-	publisherName() string
+	publishType() reflect.Type
+	Close()
 }
 
-// A Publisher publishes events on the bus.
+// A Publisher publishes typed events on a bus.
 type Publisher[T any] struct {
-	bus     *Bus
-	name    string
+	client  *Client
 	stopCtx context.Context
 	stop    context.CancelFunc
 }
 
-// PublisherOf returns a publisher for event type T on the given bus.
-//
-// The publisher's name should be a short, human-readable string that
-// identifies this event publisher. The name is only visible through
-// debugging APIs.
-func PublisherOf[T any](b *Bus, name string) *Publisher[T] {
+func newPublisher[T any](c *Client) *Publisher[T] {
 	ctx, cancel := context.WithCancel(context.Background())
 	ret := &Publisher[T]{
-		bus:     b,
-		name:    name,
+		client:  c,
 		stopCtx: ctx,
 		stop:    cancel,
 	}
-	b.addPublisher(ret)
+	c.addPublisher(ret)
 	return ret
 }
 
-func (p *Publisher[T]) publisherName() string { return p.name }
+// Close closes the publisher.
+//
+// Calls to Publish after Close silently do nothing.
+func (p *Publisher[T]) Close() {
+	// Just unblocks any active calls to Publish, no other
+	// synchronization needed.
+	p.stop()
+	p.client.deletePublisher(p)
+}
+
+func (p *Publisher[T]) publishType() reflect.Type {
+	return reflect.TypeFor[T]()
+}
 
 // Publish publishes event v on the bus.
 func (p *Publisher[T]) Publish(v T) {
@@ -48,32 +54,21 @@ func (p *Publisher[T]) Publish(v T) {
 	select {
 	case <-p.stopCtx.Done():
 		return
-	case <-p.bus.stop.WaitChan():
-		return
 	default:
 	}
 
 	select {
-	case p.bus.write <- v:
+	case p.client.publish() <- v:
 	case <-p.stopCtx.Done():
-	case <-p.bus.stop.WaitChan():
 	}
 }
 
-// ShouldPublish reports whether anyone is subscribed to events of
-// type T.
+// ShouldPublish reports whether anyone is subscribed to the events
+// that this publisher emits.
 //
 // ShouldPublish can be used to skip expensive event construction if
 // nobody seems to care. Publishers must not assume that someone will
 // definitely receive an event if ShouldPublish returns true.
 func (p *Publisher[T]) ShouldPublish() bool {
-	dests := p.bus.dest(reflect.TypeFor[T]())
-	return len(dests) > 0
-}
-
-// Close closes the publisher, indicating that no further events will
-// be published with it.
-func (p *Publisher[T]) Close() {
-	p.stop()
-	p.bus.deletePublisher(p)
+	return p.client.shouldPublish(reflect.TypeFor[T]())
 }

util/eventbus/subscribe.go

@@ -4,46 +4,59 @@
 package eventbus
 
 import (
+	"context"
 	"fmt"
 	"reflect"
 	"sync"
 )
 
-type dispatchFn func(vals *queue, stop goroutineShutdownWorker, acceptCh func() chan any) bool
+// subscriber is a uniformly typed wrapper around Subscriber[T], so
+// that debugging facilities can look at active subscribers.
+type subscriber interface {
+	subscribeType() reflect.Type
+	// dispatch is a function that dispatches the head value in vals to
+	// a subscriber, while also handling stop and incoming queue write
+	// events.
+	//
+	// dispatch exists because of the strongly typed Subscriber[T]
+	// wrapper around subscriptions: within the bus events are boxed in an
+	// 'any', and need to be unpacked to their full type before delivery
+	// to the subscriber. This involves writing to a strongly-typed
+	// channel, so subscribeState cannot handle that dispatch by itself -
+	// but if that strongly typed send blocks, we also need to keep
+	// processing other potential sources of wakeups, which is how we end
+	// up at this awkward type signature and sharing of internal state
+	// through dispatch.
+	dispatch(vals *queue, stop goroutineShutdownWorker, acceptCh func() chan any) bool
+	Close()
+}
 
-// A Queue receives events from a Bus.
-//
-// To receive events through the queue, see [Subscribe]. Subscribers
-// that share the same Queue receive events one at time, in the order
-// they were published.
-type Queue struct {
-	bus  *Bus
-	name string
+// subscribeState handles dispatching of events received from a Bus.
+type subscribeState struct {
+	client *Client
 
 	write    chan any
 	stop     goroutineShutdownControl
 	snapshot chan chan []any
 
 	outputsMu sync.Mutex
-	outputs   map[reflect.Type]dispatchFn
+	outputs   map[reflect.Type]subscriber
 }
 
-func newQueue(b *Bus, name string) *Queue {
+func newSubscribeState(c *Client) *subscribeState {
 	stopCtl, stopWorker := newGoroutineShutdown()
-	ret := &Queue{
-		bus:      b,
-		name:     name,
+	ret := &subscribeState{
+		client:   c,
 		write:    make(chan any),
 		stop:     stopCtl,
 		snapshot: make(chan chan []any),
-		outputs:  map[reflect.Type]dispatchFn{},
+		outputs:  map[reflect.Type]subscriber{},
 	}
-	b.addQueue(ret)
 	go ret.pump(stopWorker)
 	return ret
 }
 
-func (q *Queue) pump(stop goroutineShutdownWorker) {
+func (q *subscribeState) pump(stop goroutineShutdownWorker) {
 	defer stop.Done()
 	var vals queue
 	acceptCh := func() chan any {
@@ -55,13 +68,13 @@ func (q *Queue) pump(stop goroutineShutdownWorker) {
 	for {
 		if !vals.Empty() {
 			val := vals.Peek()
-			fn := q.dispatchFn(val)
-			if fn == nil {
+			sub := q.subscriberFor(val)
+			if sub == nil {
 				// Raced with unsubscribe.
 				vals.Drop()
 				continue
 			}
-			if !fn(&vals, stop, acceptCh) {
+			if !sub.dispatch(&vals, stop, acceptCh) {
 				return
 			}
 		} else {
@@ -81,16 +94,74 @@ func (q *Queue) pump(stop goroutineShutdownWorker) {
 	}
 }
 
-// A Subscriber delivers one type of event from a [Queue].
+func (s *subscribeState) addSubscriber(t reflect.Type, sub subscriber) {
+	s.outputsMu.Lock()
+	defer s.outputsMu.Unlock()
+	if s.outputs[t] != nil {
+		panic(fmt.Errorf("double subscription for event %s", t))
+	}
+	s.outputs[t] = sub
+	s.client.addSubscriber(t, s)
+}
+
+func (s *subscribeState) deleteSubscriber(t reflect.Type) {
+	s.outputsMu.Lock()
+	defer s.outputsMu.Unlock()
+	delete(s.outputs, t)
+	s.client.deleteSubscriber(t, s)
+}
+
+func (q *subscribeState) subscriberFor(val any) subscriber {
+	q.outputsMu.Lock()
+	defer q.outputsMu.Unlock()
+	return q.outputs[reflect.TypeOf(val)]
+}
+
+// Close closes the subscribeState. Implicitly closes all Subscribers
+// linked to this state, and any pending events are discarded.
+func (s *subscribeState) close() {
+	s.stop.StopAndWait()
+
+	var subs map[reflect.Type]subscriber
+	s.outputsMu.Lock()
+	subs, s.outputs = s.outputs, nil
+	s.outputsMu.Unlock()
+	for _, sub := range subs {
+		sub.Close()
+	}
+}
+
+// A Subscriber delivers one type of event from a [Client].
 type Subscriber[T any] struct {
-	recv *Queue
-	read chan T
+	doneCtx context.Context
+	done    context.CancelFunc
+	recv    *subscribeState
+	read    chan T
+}
+
+func newSubscriber[T any](r *subscribeState) *Subscriber[T] {
+	t := reflect.TypeFor[T]()
+
+	ctx, cancel := context.WithCancel(context.Background())
+	ret := &Subscriber[T]{
+		doneCtx: ctx,
+		done:    cancel,
+		recv:    r,
+		read:    make(chan T),
+	}
+	r.addSubscriber(t, ret)
+
+	return ret
+}
+
+func (s *Subscriber[T]) subscribeType() reflect.Type {
+	return reflect.TypeFor[T]()
 }
 
 func (s *Subscriber[T]) dispatch(vals *queue, stop goroutineShutdownWorker, acceptCh func() chan any) bool {
 	t := vals.Peek().(T)
 	for {
-		// Keep the cases in this select in sync with Queue.pump
+		// Keep the cases in this select in sync with subscribeState.pump
 		// above. The only different should be that this select
 		// delivers a value on s.read.
 		select {
@@ -113,58 +184,16 @@ func (s *Subscriber[T]) Events() <-chan T {
 	return s.read
 }
 
-// Close shuts down the Subscriber, indicating the caller no longer
-// wishes to receive these events. After Close, receives on
-// [Subscriber.Chan] block for ever.
-func (s *Subscriber[T]) Close() {
-	t := reflect.TypeFor[T]()
-	s.recv.bus.unsubscribe(t, s.recv)
-	s.recv.deleteDispatchFn(t)
-}
-
-func (q *Queue) dispatchFn(val any) dispatchFn {
-	q.outputsMu.Lock()
-	defer q.outputsMu.Unlock()
-	return q.outputs[reflect.ValueOf(val).Type()]
-}
-
-func (q *Queue) addDispatchFn(t reflect.Type, fn dispatchFn) {
-	q.outputsMu.Lock()
-	defer q.outputsMu.Unlock()
-	if q.outputs[t] != nil {
-		panic(fmt.Errorf("double subscription for event %s", t))
-	}
-	q.outputs[t] = fn
-}
-
-func (q *Queue) deleteDispatchFn(t reflect.Type) {
-	q.outputsMu.Lock()
-	defer q.outputsMu.Unlock()
-	delete(q.outputs, t)
-}
-
-// Done returns a channel that is closed when the Queue is closed.
-func (q *Queue) Done() <-chan struct{} {
-	return q.stop.WaitChan()
-}
-
-// Close closes the queue. All Subscribers attached to the queue are
-// implicitly closed, and any pending events are discarded.
-func (q *Queue) Close() {
-	q.stop.StopAndWait()
-	q.bus.deleteQueue(q)
+// Done returns a channel that is closed when the subscriber is
+// closed.
+func (s *Subscriber[T]) Done() <-chan struct{} {
+	return s.doneCtx.Done()
 }
 
-// Subscribe requests delivery of events of type T through the given
-// Queue. Panics if the queue already has a subscriber for T.
-func Subscribe[T any](r *Queue) Subscriber[T] {
-	t := reflect.TypeFor[T]()
-	ret := Subscriber[T]{
-		recv: r,
-		read: make(chan T),
-	}
-	r.addDispatchFn(t, ret.dispatch)
-	r.bus.subscribe(t, r)
-
-	return ret
+// Close closes the Subscriber, indicating the caller no longer wishes
+// to receive this event type. After Close, receives on
+// [Subscriber.Events] block for ever.
+func (s *Subscriber[T]) Close() {
+	s.done() // unblock receivers
+	s.recv.deleteSubscriber(reflect.TypeFor[T]())
 }