|
|
@@ -1,359 +0,0 @@
|
|
|
-From a8ddfc2e1025e2f35099b8757c7cf581cc87716b Mon Sep 17 00:00:00 2001
|
|
|
-From: aiamadeus <[email protected]>
|
|
|
-Date: Wed, 1 Nov 2023 20:25:18 +0800
|
|
|
-Subject: [PATCH] mediatek: add Netcore N60 support
|
|
|
-
|
|
|
-Connect to the router using ssh or telnet,
|
|
|
-username: useradmin, password is the web
|
|
|
-login password of the router.
|
|
|
-
|
|
|
-Signed-off-by: AnYun <[email protected]>
|
|
|
----
|
|
|
- .../mediatek/dts/mt7986a-netcore-n60.dts | 284 ++++++++++++++++++
|
|
|
- .../filogic/base-files/etc/board.d/02_network | 3 +-
|
|
|
- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 3 +-
|
|
|
- target/linux/mediatek/image/filogic.mk | 14 +
|
|
|
- 4 files changed, 302 insertions(+), 2 deletions(-)
|
|
|
- create mode 100644 target/linux/mediatek/dts/mt7986a-netcore-n60.dts
|
|
|
-
|
|
|
-diff --git a/target/linux/mediatek/dts/mt7986a-netcore-n60.dts b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
|
|
|
-new file mode 100644
|
|
|
-index 0000000000000..4cbd9bdf0deb9
|
|
|
---- /dev/null
|
|
|
-+++ b/target/linux/mediatek/dts/mt7986a-netcore-n60.dts
|
|
|
-@@ -0,0 +1,284 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+/dts-v1/;
|
|
|
-+#include <dt-bindings/gpio/gpio.h>
|
|
|
-+#include <dt-bindings/input/input.h>
|
|
|
-+
|
|
|
-+#include "mt7986a.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ model = "Netcore N60";
|
|
|
-+ compatible = "netcore,n60", "mediatek,mt7986a";
|
|
|
-+
|
|
|
-+ aliases {
|
|
|
-+ serial0 = &uart0;
|
|
|
-+ label-mac-device = &gmac0;
|
|
|
-+ led-boot = &led_status_red;
|
|
|
-+ led-failsafe = &led_status_red;
|
|
|
-+ led-running = &led_status_blue;
|
|
|
-+ led-upgrade = &led_status_blue;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ chosen {
|
|
|
-+ stdout-path = "serial0:115200n8";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ memory {
|
|
|
-+ reg = <0 0x40000000 0 0x10000000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ keys {
|
|
|
-+ compatible = "gpio-keys";
|
|
|
-+
|
|
|
-+ reset {
|
|
|
-+ label = "reset";
|
|
|
-+ linux,code = <KEY_RESTART>;
|
|
|
-+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ mesh {
|
|
|
-+ label = "mesh";
|
|
|
-+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
-+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ leds {
|
|
|
-+ compatible = "gpio-leds";
|
|
|
-+
|
|
|
-+ led_status_red: status_red {
|
|
|
-+ label = "red:status";
|
|
|
-+ gpios = <&pio 29 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led_status_blue: status_blue {
|
|
|
-+ label = "blue:status";
|
|
|
-+ gpios = <&pio 32 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&crypto {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+ð {
|
|
|
-+ status = "okay";
|
|
|
-+
|
|
|
-+ gmac0: mac@0 {
|
|
|
-+ compatible = "mediatek,eth-mac";
|
|
|
-+ reg = <0>;
|
|
|
-+ phy-mode = "2500base-x";
|
|
|
-+
|
|
|
-+ nvmem-cells = <&macaddr_lan>;
|
|
|
-+ nvmem-cell-names = "mac-address";
|
|
|
-+
|
|
|
-+ fixed-link {
|
|
|
-+ speed = <2500>;
|
|
|
-+ full-duplex;
|
|
|
-+ pause;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ gmac1: mac@1 {
|
|
|
-+ compatible = "mediatek,eth-mac";
|
|
|
-+ reg = <1>;
|
|
|
-+ phy-handle = <&phy6>;
|
|
|
-+ phy-mode = "2500base-x";
|
|
|
-+
|
|
|
-+ nvmem-cells = <&macaddr_wan>;
|
|
|
-+ nvmem-cell-names = "mac-address";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ mdio: mdio-bus {
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&mdio {
|
|
|
-+ reset-delay-us = <600>;
|
|
|
-+ reset-post-delay-us = <20000>;
|
|
|
-+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
|
-+
|
|
|
-+ phy6: phy@6 {
|
|
|
-+ compatible = "ethernet-phy-ieee802.3-c45";
|
|
|
-+ reg = <6>;
|
|
|
-+ mxl,led-config = <0x0 0x0 0x0 0x3f0>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ switch: switch@0 {
|
|
|
-+ compatible = "mediatek,mt7531";
|
|
|
-+ reg = <31>;
|
|
|
-+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
|
-+ interrupt-controller;
|
|
|
-+ #interrupt-cells = <1>;
|
|
|
-+ interrupt-parent = <&pio>;
|
|
|
-+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&switch {
|
|
|
-+ ports {
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ port@0 {
|
|
|
-+ reg = <0>;
|
|
|
-+ label = "lan1";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ reg = <1>;
|
|
|
-+ label = "lan2";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ reg = <3>;
|
|
|
-+ label = "lan3";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@4 {
|
|
|
-+ reg = <4>;
|
|
|
-+ label = "lan4";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@6 {
|
|
|
-+ reg = <6>;
|
|
|
-+ label = "cpu";
|
|
|
-+ ethernet = <&gmac0>;
|
|
|
-+ phy-mode = "2500base-x";
|
|
|
-+
|
|
|
-+ fixed-link {
|
|
|
-+ speed = <2500>;
|
|
|
-+ full-duplex;
|
|
|
-+ pause;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&spi0 {
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&spi_flash_pins>;
|
|
|
-+ status = "okay";
|
|
|
-+
|
|
|
-+ flash@0 {
|
|
|
-+ compatible = "spi-nand";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ reg = <0>;
|
|
|
-+
|
|
|
-+ spi-max-frequency = <20000000>;
|
|
|
-+ spi-tx-bus-width = <4>;
|
|
|
-+ spi-rx-bus-width = <4>;
|
|
|
-+
|
|
|
-+ mediatek,nmbm;
|
|
|
-+ mediatek,bmt-max-ratio = <1>;
|
|
|
-+ mediatek,bmt-max-reserved-blocks = <64>;
|
|
|
-+
|
|
|
-+ partitions {
|
|
|
-+ compatible = "fixed-partitions";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ partition@0 {
|
|
|
-+ label = "BL2";
|
|
|
-+ reg = <0x0000000 0x0100000>;
|
|
|
-+ read-only;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@100000 {
|
|
|
-+ label = "u-boot-env";
|
|
|
-+ reg = <0x0100000 0x0080000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ factory: partition@180000 {
|
|
|
-+ label = "Factory";
|
|
|
-+ reg = <0x0180000 0x0200000>;
|
|
|
-+ read-only;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@380000 {
|
|
|
-+ label = "FIP";
|
|
|
-+ reg = <0x0380000 0x0200000>;
|
|
|
-+ read-only;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@580000 {
|
|
|
-+ label = "ubi";
|
|
|
-+ reg = <0x0580000 0x7280000>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&pio {
|
|
|
-+ spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
|
-+ mux {
|
|
|
-+ function = "spi";
|
|
|
-+ groups = "spi0", "spi0_wp_hold";
|
|
|
-+ };
|
|
|
-+ conf-pu {
|
|
|
-+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
|
-+ drive-strength = <8>;
|
|
|
-+ mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
|
-+ };
|
|
|
-+ conf-pd {
|
|
|
-+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
|
-+ drive-strength = <8>;
|
|
|
-+ mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ wf_2g_5g_pins: wf_2g_5g-pins {
|
|
|
-+ mux {
|
|
|
-+ function = "wifi";
|
|
|
-+ groups = "wf_2g", "wf_5g";
|
|
|
-+ };
|
|
|
-+ conf {
|
|
|
-+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
|
-+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
|
-+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
|
-+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
|
-+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
|
-+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
|
-+ "WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
|
-+ drive-strength = <4>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&trng {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&uart0 {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&watchdog {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&wifi {
|
|
|
-+ status = "okay";
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&wf_2g_5g_pins>;
|
|
|
-+
|
|
|
-+ mediatek,mtd-eeprom = <&factory 0x0>;
|
|
|
-+};
|
|
|
-+
|
|
|
-+&factory {
|
|
|
-+ compatible = "nvmem-cells";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ macaddr_lan: macaddr@1fef20 {
|
|
|
-+ reg = <0x1fef20 0x6>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ macaddr_wan: macaddr@1fef26 {
|
|
|
-+ reg = <0x1fef26 0x6>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
|
|
|
-index 6fa3a9218c629..b8ac6337bd15f 100644
|
|
|
---- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
|
|
|
-+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
|
|
|
-@@ -26,6 +26,7 @@
|
|
|
- asus,tuf-ax4200|\
|
|
|
- jdcloud,re-cp-03|\
|
|
|
- mediatek,mt7981-rfb|\
|
|
|
-+ netcore,n60|\
|
|
|
- ruijie,rg-x60-pro|\
|
|
|
- unielec,u7981-01*|\
|
|
|
- zbtlink,zbt-z8102ax)
|
|
|
-diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
|
|
|
-index 7f97e55f1f973..9e35c61434be3 100644
|
|
|
---- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
|
|
|
-+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
|
|
|
-@@ -34,7 +34,8 @@ case "$board" in
|
|
|
- [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
|
|
- [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
|
|
- ;;
|
|
|
-- jcg,q30-pro)
|
|
|
-+ jcg,q30-pro|\
|
|
|
-+ netcore,n60)
|
|
|
- # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
|
|
|
- # addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
|
|
|
- [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
|
|
|
-diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
|
|
|
-index ee29b1b5c6660..9cfd720e138df 100644
|
|
|
---- a/target/linux/mediatek/image/filogic.mk
|
|
|
-+++ b/target/linux/mediatek/image/filogic.mk
|
|
|
-@@ -273,6 +273,20 @@ define Device/mediatek_mt7986b-rfb
|
|
|
- endef
|
|
|
- TARGET_DEVICES += mediatek_mt7986b-rfb
|
|
|
-
|
|
|
-+define Device/netcore_n60
|
|
|
-+ DEVICE_VENDOR := Netcore
|
|
|
-+ DEVICE_MODEL := N60
|
|
|
-+ DEVICE_DTS := mt7986a-netcore-n60
|
|
|
-+ DEVICE_DTS_DIR := ../dts
|
|
|
-+ UBINIZE_OPTS := -E 5
|
|
|
-+ BLOCKSIZE := 128k
|
|
|
-+ PAGESIZE := 2048
|
|
|
-+ KERNEL_IN_UBI := 1
|
|
|
-+ DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
|
-+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
-+endef
|
|
|
-+TARGET_DEVICES += netcore_n60
|
|
|
-+
|
|
|
- define Device/qihoo_360t7
|
|
|
- DEVICE_VENDOR := Qihoo
|
|
|
- DEVICE_MODEL := 360T7
|
kiddin9