mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImage

with 6.1, the kernel no longer fitted into the 16 MiB and
kicking down the can and increasing KERNEL_SIZE to 20 MiB
didn't help as the device failed to boot.

Using 'kernel-bin | gzip | uimage gzip' didn't work since the
uboot does not have enough heap to decompress these big kernels.

And finally playing around with uboot was more a hassle than
converting this device to take the simpleImage-boot-route in
the future.

Note: The device now takes even longer on the first boot-up after
the flash due to JFFS2 initializing all the remaining flash.
Be prepared to wait up to 10 minutes before the green status LED
stops blinking and will shine a solid green!

(On the plus site: the device now has ~10 MiB of additional
space for rootfs+rootfs_data).

Note2: This patch includes a kernel patch refresh.

Signed-off-by: Christian Lamparter <[email protected]>

target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts

@@ -27,11 +27,105 @@
 		spi0 = &spi0;
 	};
 
+	chosen {
+		/*
+		 * not yet implemented.
+		 * stdout-path = &serial0 ":9600n8";
+		 * <https://www.spinics.net/lists/devicetree-compiler/msg02487.html>
+		 *
+		 * this should work... but it doesn't because CONFIG_CMDLINE in our
+		 * OpenWrt's target config sets "console=ttyS0,115200"
+		 * stdout-path = "/soc@ffe00000/serial@4500:9600n8";
+		 */
+
+		bootargs = "console=ttyS0,9600n8";
+	};
+
+	cpus {
+		PowerPC,P1020@0 {
+			i-cache-sets = <0x80>;
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <0x20>;
+			d-cache-sets = <0x80>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <0x20>;
+			status = "okay";
+			clock-frequency = <533333328>; /* 533.33 MHz */
+			bus-frequency = <266666664>;  /* 266.66 MHz */
+			timebase-frequency = <33333333>; /* 33.33 MHz */
+		};
+
+		PowerPC,P1020@1 {
+			i-cache-sets = <0x80>;
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <0x20>;
+			d-cache-sets = <0x80>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <0x20>;
+			cpu-release-addr = <0x00 0xffff240>;
+			enable-method = "spin-table";
+			status = "disabled";
+			clock-frequency = <533333328>;
+			bus-frequency = <266666664>;
+			timebase-frequency = <33333333>;
+		};
+	};
+
 	memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		reg = <0x00 0x00 0x00 0x10000000>;
 		device_type = "memory";
 	};
 
+	/*
+	 * Usually, u-boot provided /memreserve/ properties by adding them during boot.
+	 * these have been converted to reserved-memory entries.
+	 */
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * /memreserve/   0x0000000000ffa000 0x0000000000004000;
+		 * The kernel complains when booting:
+		 *
+		 * | OF: fdt: Reserved memory: failed to reserve memory for node
+		 *		'firmware@ffa000': base 0x00ffa000, size 0 MiB
+		 *
+		 * But this likely uboot's bootargs + modified DTB. And if so, we don't care.
+		 * This is because we rely on our own dtb that's in the simpleImage.
+		 *
+		 * Note: This is backed up by u-boot. just before the kernel executes
+		 *	 it prints this final line:
+		 *	 |  Loading Device Tree to 00ff9000, end 00fff1c4 ... OK
+		 *
+		 * firmware@ffa000 {
+		 *	reg = <0x0 0xffa000 0x0 0x4000>;
+		 *	no-map;
+		 * };
+		 */
+
+		// /memreserve/   0x000000000fe2f000 0x0000000000000021;
+		firmware@fe2f000 {
+			reg = <0x0 0xfe2f000 0x0 0x21>;
+			no-map;
+		};
+
+		/*
+		 * /memreserve/   0x000000000ffff000 0x0000000000001000;
+		 * that's the spin-table - see second CPU core binding.
+		 */
+		firmware@ffff000 {
+			reg = <0x0 0xffff000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
 	board_lbc: lbc: localbus@ffe05000 {
+		bus-frequency = <16666666>; /* 16.66 MHz */
 		reg = <0 0xffe05000 0 0x1000>;
 		ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
 
@@ -117,8 +211,12 @@
 
 	board_soc: soc: soc@ffe00000 {
 		ranges = <0x0 0x0 0xffe00000 0x100000>;
+		bus-frequency = <266666664>;
 
 		spi0: spi@7000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			temperature-sensor@1 {
 				compatible = "ti,tmp125";
 				reg = <1>;
@@ -136,6 +234,9 @@
 				compatible = "national,lp5521";
 				reg = <0x32>;
 				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 #if 1
 				led_fault_red: led@0 {
 					reg = <0>;
@@ -230,6 +331,9 @@
 		};
 
 		enet0: ethernet@b0000 {
+			rx-stash-idx = <0x00>;
+			rx-stash-len = <0x60>;
+			bd-stash;
 			status = "okay";
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
@@ -242,6 +346,9 @@
 		};
 
 		enet2: ethernet@b2000 {
+			rx-stash-idx = <0x00>;
+			rx-stash-len = <0x60>;
+			bd-stash;
 			status = "okay";
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
@@ -264,31 +371,22 @@
 
 	pci0: pcie@ffe09000 {
 		reg = <0x0 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
-			0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000>,
+			 <0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
 		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
+			ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000>,
+				 <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>;
 		};
 	};
 
 	pci1: pcie@ffe0a000 {
 		reg = <0x0 0xffe0a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
-		      0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-			      0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
+		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
+			 <0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
 
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000>,
+				 <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>;
 		};
 	};
 
@@ -302,7 +400,15 @@
 		};
 	};
 };
+
 /include/ "fsl/p1020si-post.dtsi"
+&serial0 {
+	clock-frequency = <266666664>;
+};
+
+&serial1 {
+	clock-frequency = <266666664>;
+};
 
 /*
  * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses

target/linux/mpc85xx/image/p1020.mk

@@ -18,9 +18,14 @@ define Device/aerohive_hiveap-330
   DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70
   BLOCKSIZE := 128k
   KERNEL := kernel-bin | uImage none
-  KERNEL_INITRAMFS := kernel-bin | MultiImage none
+  KERNEL_INITRAMFS := kernel-bin | uImage none
+  KERNEL_NAME := simpleImage.hiveap-330
   KERNEL_SIZE := 16m
   IMAGES := sysupgrade.bin
+  KERNEL_ENTRY := 0x1500000
+  KERNEL_LOADADDR := 0x1500000
+  # append-dtb is still needed, as otherwise u-boot bootm complains
+  # about not having a FDT to edit.
   IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
 	append-rootfs | pad-rootfs | check-size | append-metadata
   IMAGE_SIZE = 63m

target/linux/mpc85xx/p1020/target.mk

@@ -1,5 +1,5 @@
 BOARDNAME:=P1020
-KERNEL_IMAGES:=simpleImage.ws-ap3825i
+KERNEL_IMAGES:=simpleImage.ws-ap3825i simpleImage.hiveap-330
 
 define Target/Description
 	Build firmware images for Freescale P1020 based boards.

target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch

@@ -28,3 +28,31 @@
  obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
  obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
  obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+ src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
++src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
+ 
+ src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
+@@ -344,6 +345,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
+ image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
+ image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
++image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
+ image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -339,6 +339,7 @@ adder875-redboot)
+     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+     binary=y
+     ;;
++simpleboot-hiveap-330|\
+ simpleboot-tl-wdr4900-v1)
+     platformo="$object/fixed-head.o $object/simpleboot.o"
+     link_address='0x1500000'

target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch

@@ -37,17 +37,17 @@ WS-AP3825i AP.
  obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+@@ -165,6 +165,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) +=
  src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
+ src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
 +src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
  
  src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
  
-@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+@@ -347,6 +348,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
 +image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
  # Board ports in arch/powerpc/platform/86xx/Kconfig
@@ -55,10 +55,10 @@ WS-AP3825i AP.
  
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
-@@ -339,6 +339,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+@@ -340,6 +340,7 @@ adder875-redboot)
      binary=y
      ;;
+ simpleboot-hiveap-330|\
 +simpleboot-ws-ap3825i|\
  simpleboot-tl-wdr4900-v1)
      platformo="$object/fixed-head.o $object/simpleboot.o"

target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch

@@ -30,9 +30,9 @@
  obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -346,6 +346,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+@@ -348,6 +348,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
 +image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
  image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
@@ -40,10 +40,10 @@
  image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
-@@ -339,6 +339,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+@@ -340,6 +340,7 @@ adder875-redboot)
      binary=y
      ;;
+ simpleboot-hiveap-330|\
 +simpleboot-ws-ap3715i|\
  simpleboot-ws-ap3825i|\
  simpleboot-tl-wdr4900-v1)

target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch

@@ -34,17 +34,17 @@
  src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
  src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 +src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
- 
-@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
+@@ -346,6 +347,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
  image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
  image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 +image-$(CONFIG_BR200_WP)		+= simpleImage.br200-wp
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
  image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
- image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
 @@ -339,6 +339,7 @@ adder875-redboot)
@@ -52,6 +52,6 @@
      binary=y
      ;;
 +simpleboot-br200-wp|\
+ simpleboot-hiveap-330|\
  simpleboot-ws-ap3715i|\
  simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)

target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch

@@ -16,7 +16,7 @@ Signed-off-by: David Bauer <[email protected]>
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -274,7 +274,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
+@@ -275,7 +275,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
  image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
  image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
  image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
@@ -24,7 +24,7 @@ Signed-off-by: David Bauer <[email protected]>
  image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
  
  #
-@@ -409,15 +408,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
+@@ -411,15 +410,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
  $(obj)/vmlinux.strip: vmlinux
  	$(STRIP) -s -R .comment $< -o $@
  

target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch

@@ -28,3 +28,31 @@
  obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
  obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
  obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -179,6 +179,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+ src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
++src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
+ 
+ src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
+@@ -360,6 +361,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
+ image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
+ image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
++image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
+ image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -341,6 +341,7 @@ adder875-redboot)
+     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+     binary=y
+     ;;
++simpleboot-hiveap-330|\
+ simpleboot-tl-wdr4900-v1)
+     platformo="$object/fixed-head.o $object/simpleboot.o"
+     link_address='0x1500000'

target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch

@@ -37,17 +37,17 @@ WS-AP3825i AP.
  obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+@@ -181,6 +181,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) +=
  src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
+ src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
 +src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
  
  src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
  
-@@ -361,6 +362,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+@@ -363,6 +364,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
 +image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
  # Board ports in arch/powerpc/platform/86xx/Kconfig
@@ -55,10 +55,10 @@ WS-AP3825i AP.
  
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
-@@ -341,6 +341,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+@@ -342,6 +342,7 @@ adder875-redboot)
      binary=y
      ;;
+ simpleboot-hiveap-330|\
 +simpleboot-ws-ap3825i|\
  simpleboot-tl-wdr4900-v1)
      platformo="$object/fixed-head.o $object/simpleboot.o"

target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch

@@ -30,9 +30,9 @@
  obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -362,6 +362,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+@@ -364,6 +364,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
 +image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
  image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
@@ -40,10 +40,10 @@
  image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
-@@ -341,6 +341,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+@@ -342,6 +342,7 @@ adder875-redboot)
      binary=y
      ;;
+ simpleboot-hiveap-330|\
 +simpleboot-ws-ap3715i|\
  simpleboot-ws-ap3825i|\
  simpleboot-tl-wdr4900-v1)

target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch

@@ -34,17 +34,17 @@
  src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
  src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 +src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S
+ src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
  src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
- 
-@@ -361,6 +362,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
+@@ -362,6 +363,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
  image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
  image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
  image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 +image-$(CONFIG_BR200_WP)		+= simpleImage.br200-wp
+ image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
  image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
  image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
- image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
 --- a/arch/powerpc/boot/wrapper
 +++ b/arch/powerpc/boot/wrapper
 @@ -341,6 +341,7 @@ adder875-redboot)
@@ -52,6 +52,6 @@
      binary=y
      ;;
 +simpleboot-br200-wp|\
+ simpleboot-hiveap-330|\
  simpleboot-ws-ap3715i|\
  simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)

target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch

@@ -16,7 +16,7 @@ Signed-off-by: David Bauer <[email protected]>
 
 --- a/arch/powerpc/boot/Makefile
 +++ b/arch/powerpc/boot/Makefile
-@@ -290,7 +290,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
+@@ -291,7 +291,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
  image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
  image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
  image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
@@ -24,7 +24,7 @@ Signed-off-by: David Bauer <[email protected]>
  image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
  
  #
-@@ -425,15 +424,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
+@@ -427,15 +426,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
  $(obj)/vmlinux.strip: vmlinux
  	$(STRIP) -s -R .comment $< -o $@