uboot-mediatek: fix factory/reset button

U-Boot commit ea6fdc13595 ("dm: button: add support for linux_code in
button-gpio.c driver") makes it mandatory to specify linux,code for all
buttons. As that broke handling of the reset button in U-Boot with the
update to U-Boot 2023.04, add linux,code for all butons.

Reported-by: @DragonBluep
Fixes: 50f7c5af4a ("uboot-mediatek: update to v2023.04")
Signed-off-by: Daniel Golle <[email protected]>

package/boot/uboot-mediatek/patches/301-mt7622-generic-reset-button-ignore-env.patch

@@ -17,7 +17,7 @@
  
  #include <mtd.h>
  #include <linux/mtd/mtd.h>
-@@ -25,7 +32,19 @@ int board_init(void)
+@@ -25,7 +32,22 @@ int board_init(void)
  
  int board_late_init(void)
  {
@@ -27,7 +27,10 @@
 +	if (!button_get_by_label(CONFIG_RESET_BUTTON_LABEL, &dev)) {
 +		puts("reset button found\n");
 +#ifdef CONFIG_RESET_BUTTON_SETTLE_DELAY
-+		mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		if (CONFIG_RESET_BUTTON_SETTLE_DELAY > 0) {
++			button_get_state(dev);
++			mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		}
 +#endif
 +		if (button_get_state(dev) == BUTTON_ON) {
 +			puts("button pushed, resetting environment\n");
@@ -40,7 +43,7 @@
  }
 --- a/arch/arm/mach-mediatek/Kconfig
 +++ b/arch/arm/mach-mediatek/Kconfig
-@@ -140,4 +140,8 @@ config MTK_BROM_HEADER_INFO
+@@ -140,4 +140,11 @@ config MTK_BROM_HEADER_INFO
  
  source "board/mediatek/mt7629/Kconfig"
  
@@ -48,4 +51,7 @@
 +	string "Button to trigger factory reset"
 +	default "reset"
 +
++config RESET_BUTTON_SETTLE_DELAY
++	int "Delay to wait for button to settle"
++	default 0
  endif

package/boot/uboot-mediatek/patches/302-mt7623-generic-reset-button-ignore-env.patch

@@ -18,7 +18,7 @@
  
  DECLARE_GLOBAL_DATA_PTR;
  
-@@ -41,3 +50,22 @@ int mmc_get_env_dev(void)
+@@ -41,3 +50,25 @@ int mmc_get_env_dev(void)
  	return mmc_get_boot_dev();
  }
  #endif
@@ -30,7 +30,10 @@
 +	if (!button_get_by_label(CONFIG_RESET_BUTTON_LABEL, &dev)) {
 +		puts("reset button found\n");
 +#ifdef CONFIG_RESET_BUTTON_SETTLE_DELAY
-+		mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		if (CONFIG_RESET_BUTTON_SETTLE_DELAY > 0) {
++			button_get_state(dev);
++			mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		}
 +#endif
 +		if (button_get_state(dev) == BUTTON_ON) {
 +			puts("button pushed, resetting environment\n");

package/boot/uboot-mediatek/patches/303-mt7986-generic-reset-button-ignore-env.patch

@@ -17,7 +17,7 @@
  
  #include <mtd.h>
  #include <linux/mtd/mtd.h>
-@@ -24,7 +31,19 @@ int board_init(void)
+@@ -24,7 +31,22 @@ int board_init(void)
  
  int board_late_init(void)
  {
@@ -28,7 +28,10 @@
 +	if (!button_get_by_label(CONFIG_RESET_BUTTON_LABEL, &dev)) {
 +		puts("reset button found\n");
 +#ifdef CONFIG_RESET_BUTTON_SETTLE_DELAY
-+		mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		if (CONFIG_RESET_BUTTON_SETTLE_DELAY > 0) {
++			button_get_state(dev);
++			mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		}
 +#endif
 +		if (button_get_state(dev) == BUTTON_ON) {
 +			puts("button pushed, resetting environment\n");

package/boot/uboot-mediatek/patches/400-update-bpir2-defconfig.patch

@@ -213,7 +213,15 @@
 +_set_bmf=setenv _set_bmf ; setenv bootmenu_${_menu_next} "Reset all settings to factory defaults.=run reset_factory ; reset" ; setenv _menu_next
 --- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
 +++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -66,6 +66,15 @@
+@@ -6,6 +6,7 @@
+  */
+ 
+ /dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
+ #include "mt7623.dtsi"
+ #include "mt7623-u-boot.dtsi"
+ 
+@@ -66,6 +67,16 @@
  			default-state = "off";
  		};
  	};
@@ -224,6 +232,7 @@
 +		factory {
 +			label = "factory";
 +			gpios = <&gpio 256 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
 +		};
 +	};
  };

package/boot/uboot-mediatek/patches/401-update-u7623-defconfig.patch

@@ -191,3 +191,52 @@
 +_update_bootdev=setenv _update_bootdev ; setenv bootargs "$console root=/dev/mmcblk0p65"
 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title                $ver"
+--- a/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
++++ b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
+@@ -6,6 +6,7 @@
+  */
+ 
+ /dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
+ #include "mt7623.dtsi"
+ #include "mt7623-u-boot.dtsi"
+ 
+@@ -50,6 +51,18 @@
+ 		regulator-always-on;
+ 	};
+ 
++	gpio-keys {
++		compatible = "gpio-keys";
++		pinctrl-names = "default";
++		pinctrl-0 = <&key_pins_a>;
++
++		factory {
++			label = "factory";
++			gpios = <&gpio 256 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -109,6 +122,19 @@
+ 		};
+ 	};
+ 
++	key_pins_a: keys-alt {
++		mux {
++			function = "gpio";
++			groups = "msdc3";
++		};
++
++		conf {
++			pins = "MSDC0E_DAT0", "MSDC0E_DAT1";
++			input-enable;
++			bias-pull-up;
++		};
++	};
++
+ 	mmc0_pins_default: mmc0default {
+ 		mux {
+ 			function = "msdc";

package/boot/uboot-mediatek/patches/402-update-bananapi-bpi-r64-device-tree.patch

@@ -1,6 +1,14 @@
 --- a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
 +++ b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
-@@ -20,6 +20,7 @@
+@@ -5,6 +5,7 @@
+  */
+ 
+ /dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
+ #include "mt7622.dtsi"
+ #include "mt7622-u-boot.dtsi"
+ 
+@@ -20,6 +21,7 @@
  
  	aliases {
  		spi0 = &snfi;
@@ -8,7 +16,7 @@
  	};
  
  	memory@40000000 {
-@@ -27,6 +28,42 @@
+@@ -27,6 +29,44 @@
  		reg = <0x40000000 0x40000000>;
  	};
  
@@ -18,11 +26,13 @@
 +		reset {
 +			label = "reset";
 +			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
 +		};
 +
 +		wps {
 +			label = "wps";
 +			gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
 +		};
 +	};
 +
@@ -51,7 +61,7 @@
  	reg_1p8v: regulator-1p8v {
  		compatible = "regulator-fixed";
  		regulator-name = "fixed-1.8V";
-@@ -182,6 +219,7 @@
+@@ -182,6 +222,7 @@
  };
  
  &uart0 {
@@ -59,7 +69,7 @@
  	status = "okay";
  };
  
-@@ -197,7 +235,7 @@
+@@ -197,7 +238,7 @@
  	status = "okay";
  	bus-width = <8>;
  	max-frequency = <50000000>;
@@ -68,7 +78,7 @@
  	vmmc-supply = <&reg_3p3v>;
  	vqmmc-supply = <&reg_3p3v>;
  	non-removable;
-@@ -208,7 +246,7 @@
+@@ -208,7 +249,7 @@
  	pinctrl-0 = <&mmc1_pins_default>;
  	status = "okay";
  	bus-width = <4>;

package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64-snand.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
 +++ b/arch/arm/dts/mt7622-bananapi-bpi-r64.dts
-@@ -19,7 +19,7 @@
+@@ -20,7 +20,7 @@
  	};
  
  	aliases {
@@ -9,7 +9,7 @@
  		ethernet0 = ð
  	};
  
-@@ -205,17 +205,11 @@
+@@ -208,17 +208,11 @@
  	};
  };
  

package/boot/uboot-mediatek/patches/405-dts-mt7623n-bpi-r2-fix-leds.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
 +++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -50,19 +50,19 @@
+@@ -51,19 +51,19 @@
  
  		blue {
  			label = "bpi-r2:pio:blue";

package/boot/uboot-mediatek/patches/406-dts-mt7623n-bpi-r2-uart0-force-highspeed.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
 +++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -243,6 +243,7 @@
+@@ -245,6 +245,7 @@
  &uart0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart0_pins_a>;

package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch

@@ -144,7 +144,7 @@
 +CONFIG_USB_STORAGE=y
 --- /dev/null
 +++ b/arch/arm/dts/mt7622-linksys-e8450-ubi.dts
-@@ -0,0 +1,194 @@
+@@ -0,0 +1,197 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * Copyright (c) 2019 MediaTek Inc.
@@ -152,6 +152,7 @@
 + */
 +
 +/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
 +#include "mt7622.dtsi"
 +#include "mt7622-u-boot.dtsi"
 +
@@ -175,11 +176,13 @@
 +		factory {
 +			label = "reset";
 +			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
 +		};
 +
 +		wps {
 +			label = "wps";
 +			gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
 +		};
 +	};
 +

package/boot/uboot-mediatek/patches/412-add-ubnt-unifi-6-lr.patch

@@ -158,6 +158,7 @@
 + */
 +
 +/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
 +#include "mt7622.dtsi"
 +#include "mt7622-u-boot.dtsi"
 +
@@ -178,12 +179,11 @@
 +
 +	gpio-keys {
 +		compatible = "gpio-keys";
-+		u-boot,dm-pre-reloc;
 +
 +		reset {
 +			label = "reset";
 +			gpios = <&gpio 62 GPIO_ACTIVE_LOW>;
-+			u-boot,dm-pre-reloc;
++			linux,code = <KEY_RESTART>;
 +		};
 +	};
 +

package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch

@@ -851,7 +851,7 @@
 +
 --- /dev/null
 +++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts
-@@ -0,0 +1,270 @@
+@@ -0,0 +1,272 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * Copyright (c) 2021 MediaTek Inc.
@@ -859,6 +859,7 @@
 + */
 +
 +/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
 +#include "mt7986.dtsi"
 +#include <dt-bindings/gpio/gpio.h>
 +
@@ -893,6 +894,7 @@
 +		wps {
 +			label = "reset";
 +			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
 +		};
 +	};
 +

package/boot/uboot-mediatek/patches/431-add-xiaomi_redmi-ax6000.patch

@@ -183,7 +183,7 @@
 +CONFIG_SERVERIP="192.168.1.254"
 --- /dev/null
 +++ b/arch/arm/dts/mt7986a-xiaomi_redmi-ax6000.dts
-@@ -0,0 +1,153 @@
+@@ -0,0 +1,156 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * Copyright (c) 2021 MediaTek Inc.
@@ -191,6 +191,7 @@
 + */
 +
 +/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
 +#include "mt7986.dtsi"
 +#include <dt-bindings/gpio/gpio.h>
 +
@@ -210,10 +211,12 @@
 +		factory {
 +			label = "reset";
 +			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
 +		};
 +		mesh {
 +			label = "mesh";
 +			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
 +		};
 +	};
 +};