mvebu: 6.6: copy files, patches & configs from 6.1

Copy all mvebu 6.1 specific files, patches and configs to 6.1.

Signed-off-by: Stijn Segers <[email protected]>

target/linux/mvebu/config-6.6

@@ -0,0 +1,447 @@
+CONFIG_AHCI_MVEBU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARMADA_370_CLK=y
+CONFIG_ARMADA_370_XP_IRQ=y
+CONFIG_ARMADA_370_XP_TIMER=y
+# CONFIG_ARMADA_37XX_WATCHDOG is not set
+CONFIG_ARMADA_38X_CLK=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_ARMADA_XP_CLK=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
+# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_MVEBU_V7_CPUIDLE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_ATA_LEDS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_FEROCEON_L2 is not set
+CONFIG_CACHE_L2X0=y
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
+CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PJ4B=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRYPTO_ESSIV=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_UTILS=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA512_ARM=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART0=y
+# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
+# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+CONFIG_DEBUG_UART_8250_SHIFT=2
+CONFIG_DEBUG_UART_PHYS=0xd0012000
+CONFIG_DEBUG_UART_VIRT=0xfec12000
+CONFIG_DEBUG_USER=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_F2FS_FS=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GCC11_NO_ARRAY_BOUNDS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GRO_CELLS=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HWBM=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_PXA is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_IWMMXT is not set
+CONFIG_JBD2=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PCA963X=y
+CONFIG_LEDS_TLC591XX=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_ARMADA_370=y
+# CONFIG_MACH_ARMADA_375 is not set
+CONFIG_MACH_ARMADA_38X=y
+# CONFIG_MACH_ARMADA_39X is not set
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_MACH_DOVE is not set
+CONFIG_MACH_MVEBU_ANY=y
+CONFIG_MACH_MVEBU_V7=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MANGLE_BOOTARGS=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_I2C=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_PXAV3=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MVEBU_CLK_CPU=y
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
+CONFIG_MVNETA_BM=y
+CONFIG_MVNETA_BM_ENABLE=y
+# CONFIG_MVPP2 is not set
+CONFIG_MV_XOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_DSA_COMMON=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_HWMON is not set
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_POOL_STATS=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+CONFIG_PCI=y
+CONFIG_PCI_BRIDGE_EMUL=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
+# CONFIG_PHY_MVEBU_A3700_UTMI is not set
+# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
+# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_38X=y
+CONFIG_PINCTRL_ARMADA_XP=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PJ4B_ERRATA_4742=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PLAT_ORION=y
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_PREEMPT_NONE_BUILD=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_ARMADA38X=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_HOST=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_PMP=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_TMP421=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SFP=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOC_BUS=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_ARMADA_3700 is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_ORION=y
+CONFIG_SRAM=y
+CONFIG_SRAM_EXEC=y
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_LEDS_TRIGGER_USBPORT=y
+CONFIG_USB_PHY=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

target/linux/mvebu/cortexa53/config-6.6

@@ -0,0 +1,91 @@
+CONFIG_64BIT=y
+CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
+CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_37XX_RWTM_MBOX=y
+CONFIG_ARMADA_37XX_WATCHDOG=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_AP_CP_HELPER=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
+CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+# CONFIG_ARM_MHU_V2 is not set
+# CONFIG_ARM_PL172_MPMC is not set
+CONFIG_ARM_PSCI_FW=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MVEBU_GICP=y
+CONFIG_MVEBU_ICU=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_MVEBU_SEI=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_MVEBU_A3700_COMPHY=y
+CONFIG_PHY_MVEBU_A3700_UTMI=y
+CONFIG_PINCTRL_AC5=y
+CONFIG_PINCTRL_ARMADA_37XX=y
+CONFIG_PINCTRL_ARMADA_AP806=y
+CONFIG_PINCTRL_ARMADA_CP110=y
+CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPI_ARMADA_3700=y
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
+CONFIG_TURRIS_MOX_RWTM=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_VMAP_STACK=y
+CONFIG_ZONE_DMA32=y

target/linux/mvebu/cortexa72/config-6.6

@@ -0,0 +1,111 @@
+CONFIG_64BIT=y
+CONFIG_AQUANTIA_PHY=y
+CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
+CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_SVE=y
+# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_AP_CPU_CLK=y
+CONFIG_ARMADA_AP_CP_HELPER=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
+CONFIG_ARM_ARMADA_8K_CPUFREQ=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+# CONFIG_ARM_PL172_MPMC is not set
+CONFIG_ARM_PSCI_FW=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CRC_CCITT=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_HW_RANDOM_OMAP=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_LEDS_IEI_WT61P803_PUZZLE=y
+CONFIG_LEDS_IS31FL319X=y
+CONFIG_MARVELL_10G_PHY=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_IEI_WT61P803_PUZZLE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MVEBU_GICP=y
+CONFIG_MVEBU_ICU=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_MVEBU_SEI=y
+CONFIG_MVPP2=y
+CONFIG_MV_XOR_V2=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NVMEM_LAYOUTS=y
+CONFIG_NVMEM_LAYOUT_ONIE_TLV=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+# CONFIG_PCI_AARDVARK is not set
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB_LEDS=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MVEBU_CP110_UTMI=y
+CONFIG_PINCTRL_AC5=y
+CONFIG_PINCTRL_ARMADA_37XX=y
+CONFIG_PINCTRL_ARMADA_AP806=y
+CONFIG_PINCTRL_ARMADA_CP110=y
+CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RAS=y
+# CONFIG_RAVE_SP_CORE is not set
+CONFIG_REGULATOR_GPIO=y
+# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
+CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_VMAP_STACK=y
+CONFIG_ZONE_DMA32=y

target/linux/mvebu/cortexa9/config-6.6

@@ -0,0 +1,12 @@
+CONFIG_ARM_HAS_GROUP_RELOCS=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
+CONFIG_IRQSTACKS=y
+CONFIG_LED_TRIGGER_PHY=y
+CONFIG_MTD_SPLIT_SEIL_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_VIRT_CONCAT=y
+CONFIG_PHY_MVEBU_A38X_COMPHY=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_THREAD_INFO_IN_TASK=y

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts

@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS220DE
+ *
+ * Copyright (C) 2023 Daniel González Cabanelas <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Buffalo LinkStation LS220DE";
+	compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		led-boot = &led_boot;
+		led-failsafe = &led_failsafe;
+		led-running = &led_power;
+		led-upgrade = &led_upgrade;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		append-rootblock = "nullparameter="; /* override the bootloader args */
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	system_fan: gpio_fan {
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+			 &gpio0 14 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		hdd-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
+
+			trips {
+				hdd_alert1: trip1 {
+					temperature = <34000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert2: trip2 {
+					temperature = <40000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert3: trip3 {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				hdd_hot {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				hdd_crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&hdd_alert1>;
+					cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
+				};
+				map2 {
+					trip = <&hdd_alert2>;
+					cooling-device = <&system_fan 2 2>;
+				};
+				map3 {
+					trip = <&hdd_alert3>;
+					cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Switch";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		function {
+			label = "Function Button";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+		indicator_red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		led_power: power_white {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_failsafe: power_red {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_upgrade: power_orange {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_boot: indicator_white {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd1_red {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+			function-enumerator = <1>;
+		};
+
+		hdd2_red {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata2";
+			function-enumerator = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
+		pinctrl-names = "default";
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "HDD1";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD2";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
+				   <0x3 0x11 0x0000 0x4401>, /* LED polarity */
+				   <0x3 0x12 0x0000 0x4905>; /* LED timer */
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi_kernel";
+				reg = <0x00000000 0x02000000>; /* 32 MiB */
+			};
+
+			partition@2000000 {
+				label = "ubi";
+				reg = <0x02000000 0x1df00000>; /* 479 MiB */
+			};
+		};
+	};
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x00000 0xf0000>; /* 960 KiB*/
+				label = "u-boot";
+				read-only;
+			};
+			partition@f0000 {
+				reg = <0xf0000 0x10000>; /* 64 KiB */
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pmx_power_hdd2: pmx-power-hdd2 {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_power_hdd1: pmx-power-hdd1 {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_hdd_present: pmx-hdd-present {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds {
+		marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds {
+		marvell,pins = "mpp55", "mpp57", "mpp62";
+		marvell,function = "gpio";
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts

@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS421DE
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Buffalo LinkStation LS421DE";
+	compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		led-boot = &led_boot;
+		led-failsafe = &led_failsafe;
+		led-running = &led_power;
+		led-upgrade = &led_upgrade;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+		append-rootblock = "nullparameter="; /* override the bootloader args */
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	system_fan: gpio_fan {
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+			 &gpio0 14 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		hdd-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
+
+			trips {
+				hdd_alert1: trip1 {
+					temperature = <36000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert2: trip2 {
+					temperature = <44000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				hdd_alert3: trip3 {
+					temperature = <52000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				hdd_crit: trip4 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&hdd_alert1>;
+					cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
+				};
+				map2 {
+					trip = <&hdd_alert2>;
+					cooling-device = <&system_fan 2 2>;
+				};
+				map3 {
+					trip = <&hdd_alert3>;
+					cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&ethphy_alert1>;
+					cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Switch";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		function {
+			label = "Function Button";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+		system_red {
+			label = "ls421de:red:system";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power: power_white {
+			label = "ls421de:white:power";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_failsafe: power_red {
+			label = "ls421de:red:power";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_upgrade: power_orange {
+			label = "ls421de:orange:power";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_boot: system_white {
+			label = "ls421de:white:system";
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd1_red {
+			label = "ls421de:red:hdd1";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		hdd2_red {
+			label = "ls421de:red:hdd2";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "HDD1";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD2";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rs5c372a: rs5c372a@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+		wakeup-source;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
+		reg = <0>;
+		marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */
+				   <0x3 0x10 0x0000 0x1991>, /* LED function */
+				   <0x3 0x11 0x0000 0x4401>, /* LED polarity */
+				   <0x3 0x12 0x0000 0x4905>; /* LED timer */
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+	pinctrl-0 = <&pmx_pcie>;
+	pinctrl-names = "default";
+
+	/* Connected to uPD720202 USB 3.0 Host */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+	/* No CD or WP GPIOs */
+	broken-cd;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x02000000>;  /* 32 MiB */
+			};
+
+			partition@2000000 {
+				label = "ubi";
+				reg = <0x02000000 0x1e000000>;  /* 480 MiB */
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x00000 0xf0000>; /* 960 KiB*/
+				label = "u-boot";
+				read-only;
+			};
+			partition@f0000 {
+				reg = <0xf0000 0x10000>; /* 64 KiB */
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp5";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_hdd1: pmx-power-hdd1 {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd2: pmx-power-hdd2 {
+		marvell,pins = "mpp9";
+		marvell,function = "gpo";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_hdd_present: pmx-hdd-present {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds {
+		marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds {
+		marvell,pins = "mpp55", "mpp57", "mpp62";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp56", "mpp60";
+		marvell,function = "pcie";
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-370-c200-v2.dts

@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2021 Pawel Dembicki <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_red;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_red: led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+		};
+
+		led_status_green: led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "ubi";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+
+		/* -[0000:00]---01.0-[01]----00.0 */
+		/* usbport trigger won't work */
+		bridge@0,1 {
+			compatible = "pci11ab,6710";
+			reg = <0x3800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			usb@1,0 {
+				/* Renesas uPD720202 */
+				compatible = "pci1912,0015";
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				usb1_port: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <1>;
+				};
+
+				usb2_port: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	/* this gpio is connected to the pin of buzzer
+	 * leave it as is due lack of proper driver
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-380-iij-sa-w2.dts

@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-380.dtsi"
+
+/ {
+	model = "IIJ SA-W2";
+	compatible = "iij,sa-w2", "marvell,armada380";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+		label-mac-device = &ge0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_keys_pins>;
+
+		button-init {
+			label = "init";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_leds_pins>;
+
+		led-0 {
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-1 {
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led-2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-3 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-4 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led-5 {
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led-6 {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		led-7 {
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led_power_green: led-8 {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led_power_red: led-9 {
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led-10 {
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+
+	regulator-vbus-usb0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus-usb0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-vbus-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus-usb1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmx_usb_pins: usb-pins {
+		marvell,pins = "mpp2",		 /* smsc usb2514b reset */
+			       "mpp48", "mpp49", /* port over current */
+			       "mpp52", "mpp53"; /* port vbus */
+		marvell,function = "gpio";
+	};
+
+	pmx_keys_pins: keys-pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds_pins: leds-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35",
+			       "mpp36", "mpp44", "mpp45", "mpp46", "mpp47",
+			       "mpp54", "mpp55";
+		marvell,function = "gpio";
+	};
+};
+
+&gpio0 {
+	usb-hub-reset {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmx_usb_pins>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* SMSC USB2514B on PCB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+
+	phy-connection-type = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+
+	nvmem-cells = <&macaddr_bdinfo_6 1>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	/* Marvell 88E6172 */
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "ge1_0";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ge1_1";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ge1_2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ge1_3";
+			};
+
+			ge0: port@4 {
+				reg = <4>;
+				label = "ge0";
+				nvmem-cells = <&macaddr_bdinfo_6 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			/*
+			 * eth0 is connected to port5 for WAN connection
+			 * on port4 ("GE0")
+			 */
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-connection-type = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x10000>;
+				label = "bootloader-env";
+				read-only;
+			};
+
+			partition@110000 {
+				reg = <0x110000 0xf0000>;
+				label = "board_info";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_bdinfo_6: macaddr@6 {
+						compatible = "mac-base";
+						reg = <0x6 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@200000 {
+				compatible = "iij,seil-firmware";
+				reg = <0x200000 0xf00000>;
+				label = "firmware";
+				iij,bootdev-name = "flash";
+				iij,seil-id = <0x5345494c 0x32303135>;
+			};
+
+			partition@1100000 {
+				compatible = "iij,seil-firmware";
+				reg = <0x1100000 0xf00000>;
+				label = "rescue";
+				iij,bootdev-name = "rescue";
+				iij,seil-id = <0x5345494c 0x32303135>;
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts

@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "armada-385-fortinet-fg-x0e.dtsi"
+
+/ {
+	model = "Fortinet FortiGate 30E";
+	compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+};
+
+&gpio_leds {
+	led-14 {
+		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_AMBER>;
+		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
+	};
+
+	led-15 {
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
+	};
+};
+
+&pinctrl {
+	pmx_switch_pins: switch-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
+
+	/* Marvell 88E6176 */
+	switch@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "wan";
+				nvmem-cells = <&macaddr_bdinfo_d880 1>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				nvmem-cells = <&macaddr_bdinfo_d880 5>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				nvmem-cells = <&macaddr_bdinfo_d880 4>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				nvmem-cells = <&macaddr_bdinfo_d880 3>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+				nvmem-cells = <&macaddr_bdinfo_d880 2>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-connection-type = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts

@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "armada-385-fortinet-fg-x0e.dtsi"
+
+/ {
+	model = "Fortinet FortiGate 50E";
+	compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+};
+
+&gpio_leds {
+	led-14 {
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
+	};
+
+	led-15 {
+		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
+	};
+
+	led-16 {
+		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_AMBER>;
+		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
+	};
+
+	led-17 {
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
+	};
+};
+
+&pinctrl {
+	pmx_phy_switch_pins: phy-switch-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
+		marvell,function = "gpio";
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	nvmem-cells = <&macaddr_bdinfo_d880 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth2 {
+	status = "okay";
+
+	phy-handle = <&ethphy1>;
+	phy-connection-type = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <3>;
+	nvmem-cells = <&macaddr_bdinfo_d880 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
+
+	/* Marvell 88E1512 */
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0141,0dd1",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+		/*
+		 * LINK/ACT   (Green): LED[0], Active Low
+		 * SPEED 100M (Amber): LED[1], Active High
+		 */
+		marvell,reg-init = <3 16 0 0x71>,
+				   <3 17 0 0x4>;
+	};
+
+	/* Marvell 88E1512 */
+	ethphy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0141,0dd1",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+		/*
+		 * LINK/ACT   (Green): LED[0], Active Low
+		 * SPEED 100M (Amber): LED[1], Active High
+		 */
+		marvell,reg-init = <3 16 0 0x71>,
+				   <3 17 0 0x4>;
+	};
+
+	/* Marvell 88E6176 */
+	switch@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				nvmem-cells = <&macaddr_bdinfo_d880 7>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				nvmem-cells = <&macaddr_bdinfo_d880 6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				nvmem-cells = <&macaddr_bdinfo_d880 5>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				nvmem-cells = <&macaddr_bdinfo_d880 4>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+				nvmem-cells = <&macaddr_bdinfo_d880 3>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-connection-type = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi

@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+		label-mac-device = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:9600n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_gpio_keys_pins>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_gpio_leds_pins>;
+
+		led-0 {
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+		};
+
+		led-1 {
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led_status_green: led-2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led-4 {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_ALARM;
+		};
+
+		led_status_red: led-5 {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
+		};
+
+		led-7 {
+			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
+		};
+
+		led-8 {
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
+		};
+
+		led-9 {
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
+		};
+
+		led-10 {
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
+		};
+
+		led-11 {
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
+		};
+
+		led-12 {
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
+		};
+
+		led-13 {
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
+		};
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "fixed-regulator";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	gpio2: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <0x2>;
+	};
+
+	hwmon@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmx_gpio_leds_pins: gpio-leds-pins {
+		marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
+			       "mpp45", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_pins: usb-pins {
+		marvell,pins = "mpp53";
+		marvell,function = "gpio";
+	};
+
+	pmx_gpio_keys_pins: gpio-keys-pins {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+
+	phy-connection-type = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	nvmem-cells = <&macaddr_bdinfo_d880 0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmx_usb_pins>;
+	status = "okay";
+
+	vbus-supply = <&reg_usb_vbus>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x1c0000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@1c0000 {
+				reg = <0x1c0000 0x10000>;
+				label = "firmware-info";
+
+				/*
+				 *  0x10 - 0x2f : image name (image1)
+				 *  0x30 - 0x4f : image name (image2)
+				 * 0x170 (1byte): active image (0x0/0x1)
+				 * 0x184 - 0x185: kernel block count (image1)
+				 * 0x18c - 0x18d: rootfs block count (image1)
+				 * 0x194 - 0x195: kernel block count (image2)
+				 * 0x19c - 0x19d: rootfs block count (image2)
+				 * 0x1be (1byte): bit7 -> active flag (image1)?
+				 * 0x1ce (1byte): bit7 -> active flag (image2)?
+				 *
+				 * Note: block size --> 0x200 (512 bytes)
+				 */
+			};
+
+			partition@1d0000 {
+				reg = <0x1d0000 0x10000>;
+				label = "dtb";
+				read-only;
+			};
+
+			partition@1e0000 {
+				reg = <0x1e0000 0x10000>;
+				label = "u-boot-env";
+				read-only;
+			};
+
+			partition@1f0000 {
+				reg = <0x1f0000 0x10000>;
+				label = "board-info";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_bdinfo_d880: macaddr@d880 {
+						compatible = "mac-base";
+						reg = <0xd880 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@200000 {
+				reg = <0x200000 0x600000>;
+				label = "kernel";
+			};
+
+			partition@800000 {
+				reg = <0x800000 0x1800000>;
+				label = "rootfs";
+			};
+
+			partition@2000000 {
+				reg = <0x2000000 0x600000>;
+				label = "kn2";
+				read-only;
+			};
+
+			partition@2600000 {
+				reg = <0x2600000 0x1800000>;
+				label = "rfs2";
+				read-only;
+			};
+
+			partition@3e00000 {
+				reg = <0x3e00000 0x1200000>;
+				label = "part1";
+				read-only;
+			};
+
+			partition@5000000 {
+				reg = <0x5000000 0x1200000>;
+				label = "part2";
+				read-only;
+			};
+
+			partition@6200000 {
+				reg = <0x6200000 0x1e00000>;
+				label = "config";
+				read-only;
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-linksys-venom.dts

@@ -0,0 +1,213 @@
+/*
+ * Device Tree file for the Linksys WRT32X (Venom)
+ *
+ * Copyright (C) 2017 Imre Kaloz <[email protected]>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT32X";
+	compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
+		     "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+		append-rootblock = "root=/dev/mtdblock";
+	};
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "venom:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_blue@1 {
+		label = "venom:blue:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "venom:blue:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "venom:blue:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "venom:blue:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_blue@8 {
+		label = "venom:blue:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "venom:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "venom:blue:power";
+	};
+
+	sata {
+		gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		label = "venom:blue:sata";
+	};
+
+	wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "venom:blue:wlan_2g";
+	};
+
+	wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "venom:blue:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* Spansion S34ML02G2 256MiB, OEM Layout */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;	/* 2MB */
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u_env";
+			reg = <0x200000 0x20000>;	/* 128KB */
+		};
+
+		partition@220000 {
+			label = "s_env";
+			reg = <0x220000 0x40000>;	/* 256KB */
+		};
+
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x260000 0x5c0000>;	/* 5.75MB */
+		};
+
+		partition@7e0000 {
+			label = "devinfo";
+			reg = <0x7e0000 0x40000>;	/* 256KB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@900000 {
+			label = "kernel1";
+			reg = <0x900000 0x7b00000>;	/* 123MB */
+		};
+
+		partition@f00000 {
+			label = "rootfs1";
+			reg = <0xf00000 0x7500000>;	/* 117MB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@8400000 {
+			label = "kernel2";
+			reg = <0x8400000 0x7b00000>;	/* 123MB */
+		};
+
+		partition@8a00000 {
+			label = "rootfs2";
+			reg = <0x8a00000 0x7500000>;	/* 117MB */
+		};
+
+		/* last MB is for the BBT, not writable */
+		partition@ff00000 {
+			label = "BBT";
+			reg = <0xff00000 0x100000>;
+		};
+	};
+};
+
+
+&pcie1 {
+	mwlwifi {
+		marvell,chainmask = <4 4>;
+	};
+};
+
+&pcie2 {
+	mwlwifi {
+		marvell,chainmask = <4 4>;
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};

target/linux/mvebu/files-6.6/arch/arm/boot/dts/armada-385-nas1dual.dts

@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Device Tree file for ipTIME NAS1dual
+ *
+ * Copyright (C) 2020 Sungbo Eo <[email protected]>
+ *
+ * Based on armada-385-linksys.dtsi
+ * Copyright (C) 2015 Imre Kaloz <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "ipTIME NAS1dual";
+	compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		led-boot = &led_ready;
+		led-failsafe = &led_ready;
+		led-running = &led_ready;
+		led-upgrade = &led_ready;
+		label-mac-device = &eth0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+		          MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+		          MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+		          MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+		          MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		power {
+			label = "Power Button";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		copy {
+			label = "USB Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_pins>;
+
+		led_ready: ready {
+			label = "blue:ready";
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd {
+			label = "blue:hdd";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_fan_pins>;
+		gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
+		        <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		/* We don't know the exact rpm, just use dummy values here. */
+		gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sata_power_pins>;
+
+		reg_sata_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "sata-power";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			regulator-always-on;
+		};
+	};
+};
+
+&ahci0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sata-port@0 {
+		reg = <0>;
+		target-supply = <&reg_sata_power>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-handle = <&ethphy1>;
+	phy-connection-type = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	nvmem-cells = <&macaddr_uboot_fffa8>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	nvmem-cells = <&macaddr_uboot_fffa8>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	pca9536: gpio@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "power-led", "power-board";
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	/* LED1: On - Link, Blink - Activity, Off - No Link */
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+		marvell,reg-init = <3 16 0 0x1017>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+		marvell,reg-init = <3 16 0 0x1017>;
+	};
+};
+
+&pinctrl {
+	gpio_keys_pins: gpio-keys-pins {
+		marvell,pins = "mpp24", "mpp26", "mpp48";
+		marvell,function = "gpio";
+	};
+
+	gpio_leds_pins: gpio-leds-pins {
+		marvell,pins = "mpp18", "mpp20", "mpp51";
+		marvell,function = "gpio";
+	};
+
+	gpio_fan_pins: gpio-fan-pins {
+		marvell,pins = "mpp25", "mpp50";
+		marvell,function = "gpio";
+	};
+
+	sata_power_pins: sata-power-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	uart1_pins_alt: uart-pins-1-alt {
+		marvell,pins = "mpp45", "mpp46";
+		marvell,function = "ua1";
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_uboot_fffa8: macaddr@fffa8 {
+						reg = <0xfffa8 0x6>;
+					};
+				};
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x03ec0000>;
+				label = "firmware";
+
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					reg = <0x00000000 0x00600000>;
+					label = "kernel";
+				};
+
+				partition@600000 {
+					reg = <0x00600000 0x038c0000>;
+					label = "rootfs";
+				};
+			};
+
+			partition@3fc0000 {
+				reg = <0x03fc0000 0x00040000>;
+				label = "config";
+				read-only;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_alt>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb3_0_port1: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+
+	usb3_0_port2: port@2 {
+		reg = <2>;
+		#trigger-source-cells = <0>;
+	};
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode eDPU Board";
+	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
+ * 2500Base-X since until 5.15 support for mvebu is available trying to
+ * use 2500Base-X will cause buffer overruns for which the fix is not
+ * easily backportable.
+ */
+&eth0 {
+	phy-mode = "1000base-x";
+};
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+
+	/* Actual device is MV88E6361 */
+	switch: switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth0>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "downlink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "uplink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				sfp = <&sfp_eth1>;
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts

@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+	compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
+		ethernet4 = &switch0port4;
+		ethernet5 = &switch0port5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+		/* No assigned functions to the LEDs by default */
+		led1 {
+			label = "ebin-ultra:blue:led1";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			label = "ebin-ultra:green:led2";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			label = "ebin-ultra:red:led3";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+		led4 {
+			label = "ebin-ultra:yellow:led4";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x3e0000>;
+			};
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <100000>;
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+	usb-phy = <&usb3_phy>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	extphy: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <3>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: port@0 {
+				reg = <0>;
+				ethernet = <&eth0>;
+			};
+
+			switch0port1: port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			switch0port2: port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+
+			switch0port3: port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&switch0phy3>;
+			};
+
+			switch0port4: port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy4>;
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-handle = <&extphy>;
+				phy-mode = "sgmii";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@11 {
+				reg = <0x11>;
+			};
+			switch0phy2: switch0phy2@12 {
+				reg = <0x12>;
+			};
+			switch0phy3: switch0phy3@13 {
+				reg = <0x13>;
+			};
+			switch0phy4: switch0phy4@14 {
+				reg = <0x14>;
+			};
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <BTN_0>;
+			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		vpn {
+			label = "green:vpn";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0xf0000>;
+				read-only;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0xf0000 0x8000>;
+				read-only;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_factory_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+
+					macaddr_factory_6: macaddr@6 {
+						reg = <0x6 0x6>;
+					};
+				};
+			};
+
+			partition@100000 {
+				label = "gl-firmware-dtb";
+				reg = <0x100000 0x10000>;
+				read-only;
+			};
+
+			partition@110000 {
+				label = "gl-firmware";
+				reg = <0x110000 0xef0000>;
+				read-only;
+			};
+
+			partition@ef0000 {
+				label = "gl-firmware-jffs2";
+				reg = <0xef0000 0x110000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts

@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&pinctrl_nb {
+	i2c1_recovery_pins: i2c1-recovery-pins {
+		groups = "i2c1";
+		function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&eth0 {
+	phy-mode = "2500base-x";
+	sfp = <&sfp_eth0>;
+};
+
+&eth1 {
+	phy-mode = "2500base-x";
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi

@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
+&pinctrl_nb {
+	i2c2_recovery_pins: i2c2-recovery-pins {
+		groups = "i2c2";
+		function = "gpio";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	temp-sensor@48 {
+		compatible = "ti,tmp75c";
+		reg = <0x48>;
+	};
+
+	temp-sensor@49 {
+		compatible = "ti,tmp75c";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy1 0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+	status = "okay";
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts

@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree file for Globalscale MOCHAbin
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Globalscale MOCHAbin";
+	compatible = "globalscale,mochabin", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		ethernet6 = &swport4;
+	};
+
+	/* SFP+ 10G */
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio  = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* SFP 1G */
+	sfp_eth2: sfp-eth2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c0>;
+		los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio  = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* microUSB UART console */
+&uart0 {
+	status = "okay";
+
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* eMMC */
+&ap_sdhci0 {
+	status = "okay";
+
+	bus-width = <4>;
+	non-removable;
+	/delete-property/ marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+};
+
+&cp0_pinctrl {
+	cp0_uart0_pins: cp0-uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+
+	cp0_spi0_pins: cp0-spi0-pins {
+		marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+		marvell,function = "spi0";
+	};
+
+	cp0_spi1_pins: cp0-spi1-pins {
+		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+
+	cp0_i2c0_pins: cp0-i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c1";
+	};
+
+	pca9554_int_pins: pca9554-int-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_rgmii1_pins: cp0-rgmii1-pins {
+		marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
+			       "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
+		marvell,function = "ge1";
+	};
+
+	is31_sdb_pins: is31-sdb-pins {
+		marvell,pins = "mpp30";
+		marvell,function = "gpio";
+	};
+
+	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	cp0_switch_pins: cp0-switch-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	cp0_phy_pins: cp0-phy-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+};
+
+/* mikroBUS UART */
+&cp0_uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart0_pins>;
+};
+
+/* mikroBUS SPI */
+&cp0_spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+};
+
+/* SPI-NOR */
+&cp0_spi1{
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x3e0000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+/* mikroBUS, 1G SFP and GPIO expander */
+&cp0_i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	sfp_gpio: pca9554@39 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9554_int_pins>;
+		reg = <0x39>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/*
+		 * IO0_0: SFP+_TX_FAULT
+		 * IO0_1: SFP+_TX_DISABLE
+		 * IO0_2: SFP+_PRSNT
+		 * IO0_3: SFP+_LOSS
+		 * IO0_4: SFP_TX_FAULT
+		 * IO0_5: SFP_TX_DISABLE
+		 * IO0_6: SFP_PRSNT
+		 * IO0_7: SFP_LOSS
+		 */
+	};
+};
+
+/* IS31FL3199, mini-PCIe and 10G SFP+ */
+&cp0_i2c1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+
+	leds@64 {
+		compatible = "issi,is31fl3199";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&is31_sdb_pins>;
+		shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
+		reg = <0x64>;
+
+		led1_red: led@1 {
+			label = "red:led1";
+			reg = <1>;
+			led-max-microamp = <20000>;
+		};
+
+		led1_green: led@2 {
+			label = "green:led1";
+			reg = <2>;
+		};
+
+		led1_blue: led@3 {
+			label = "blue:led1";
+			reg = <3>;
+		};
+
+		led2_red: led@4 {
+			label = "red:led2";
+			reg = <4>;
+		};
+
+		led2_green: led@5 {
+			label = "green:led2";
+			reg = <5>;
+		};
+
+		led2_blue: led@6 {
+			label = "blue:led2";
+			reg = <6>;
+		};
+
+		led3_red: led@7 {
+			label = "red:led3";
+			reg = <7>;
+		};
+
+		led3_green: led@8 {
+			label = "green:led3";
+			reg = <8>;
+		};
+
+		led3_blue: led@9 {
+			label = "blue:led3";
+			reg = <9>;
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	/* 88E1512 PHY */
+	eth2phy: ethernet-phy@1 {
+		reg = <1>;
+		sfp = <&sfp_eth2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_phy_pins>;
+		reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 88E6141 Topaz switch */
+	switch: switch@3 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_switch_pins>;
+		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&swphy1>;
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&swphy2>;
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&swphy3>;
+			};
+
+			swport4: port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&swphy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&cp0_eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swphy1: swphy1@17 {
+				reg = <17>;
+			};
+
+			swphy2: swphy2@18 {
+				reg = <18>;
+			};
+
+			swphy3: swphy3@19 {
+				reg = <19>;
+			};
+
+			swphy4: swphy4@20 {
+				reg = <20>;
+			};
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* 10G SFP+ */
+&cp0_eth0 {
+	status = "okay";
+
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+/* Topaz switch uplink */
+&cp0_eth1 {
+	status = "okay";
+
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy0 1>;
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+/* 1G SFP or 1G RJ45 */
+&cp0_eth2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_rgmii1_pins>;
+
+	phy = <&eth2phy>;
+	phy-mode = "rgmii-id";
+};
+
+/* SMSC USB5434B hub */
+&cp0_usb3_0 {
+	status = "okay";
+
+	phys = <&cp0_comphy1 0>;
+	phy-names = "cp0-usb3h0-comphy";
+};
+
+/* miniPCI-E USB */
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* 7 + 12 SATA connector (J24) */
+	sata-port@0 {
+		phys = <&cp0_comphy2 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+
+	/* M.2-2250 B-key (J39) */
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+/* miniPCI-E (J5) */
+&cp0_pcie2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+	reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts

@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright SolidRun Ltd.
+ * Copyright (C) 2024 Tobias Schramm <[email protected]>
+ *
+ * Device tree for the CN9130-based ClearFog Pro
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SolidRun ClearFog Pro";
+	compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
+		     "marvell,armada-ap807";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		spi1 = &cp0_spi1;
+	};
+
+	memory@00000000 {
+		reg = <0x0 0x0 0x1 0x0>;
+		device_type = "memory";
+	};
+
+	/* Virtual regulator, root of power tree */
+	vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-always-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* Regulators supplied by vin */
+	v_5v0: regulator-v_5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v_5v0";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vin>;
+	};
+
+	v_3v3: regulator-v_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3v3";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vin>;
+	};
+
+	/* Regulators supplied by v_5v0 */
+	v_1v8: regulator-v_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "v_1v8";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
+		vin-supply = <&v_5v0>;
+	};
+
+	/* Regulators internal to SOM */
+	vqmmc: regulator-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vqmmc";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&v_5v0>;
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+		compatible = "usb-nop-xceiv";
+		vbus-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+
+	cp0_sfp_eth0: sfp-eth@0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_button_pin>;
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC  */
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&vqmmc>;
+	status = "okay";
+};
+
+&cp0_crypto {
+	status = "okay";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_expander0_pins>;
+		vcc-supply = <&v_3v3>;
+
+		pcie1_0_clkreq {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+
+		pcie1_0_w_disable {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+
+		pcie2_0_clkreq {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+
+		pcie2_0_w_disable {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+
+		usb3_ilimit {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+
+		m2_devslp {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* ADC only for mikroBUS connector */
+	mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	/* EEPROM on the SOM */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "onie,tlv-layout";
+
+			onie_tlv_macaddr: mac-address {
+				#nvmem-cell-cells = <1>;
+			};
+		};
+	};
+};
+
+/* SMBUS on mini PCIe sockets */
+&cp0_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		/* Green led blinks on activity, orange LED on link */
+		marvell,reg-init = <3 16 0 0x0064>;
+	};
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_dsa0_pins>;
+		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 88E1512 PHY */
+			port6_phy: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&cp0_eth1>;
+				label = "cpu";
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				phy-handle = <&port6_phy>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - SATA on bottom M.2 B-Key connector */
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		status = "disabled";
+	};
+
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		target-supply = <&v_3v3>;
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
+&cp0_usb3_0 {
+	status = "okay";
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+};
+
+/* SRDS #1 - USB-A 3.0 host port */
+&cp0_usb3_1 {
+	status = "okay";
+	phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
+	phy-names = "utmi", "usb";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	dr_mode = "host";
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy2 0>;
+	managed = "in-band-status";
+	nvmem-cells = <&onie_tlv_macaddr 0>;
+	nvmem-cell-names = "mac-address";
+	sfp = <&cp0_sfp_eth0>;
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+	status = "okay";
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	nvmem-cells = <&onie_tlv_macaddr 1>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* SRDS #4 - mini PCIe slot near SOM */
+&cp0_pcie1 {
+	status = "okay";
+	phys = <&cp0_comphy4 1>;
+	num-lanes = <1>;
+	reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+};
+
+/* SRDS #5 - mini PCIe slot far from SOM */
+&cp0_pcie2 {
+	status = "okay";
+	phys = <&cp0_comphy5 2>;
+	num-lanes = <1>;
+	reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+};
+
+/* GE PHY RGMII */
+&cp0_eth2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge2_rgmii_pins>;
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&onie_tlv_macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+/* micro SD card slot */
+&cp0_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	vqmmc-supply = <&v_3v3>;
+	vmmc-supply = <&v_3v3>;
+};
+
+&cp0_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+
+		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
+			marvell,pins = "mpp43";
+			marvell,function = "sdio";
+		};
+
+		cp0_sdhci_pins: cp0-sdhci-pins {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp12", "mpp13", "mpp14",
+				       "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_dsa0_pins: cp0-dsa0-pins {
+			marvell,pins = "mpp27", "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp0_button_pin: cp0-button-pin {
+			marvell,pins = "mpp32";
+			marvell,function = "gpio";
+		};
+
+		cp0_expander0_pins: cp0-expander0-pins {
+			marvell,pins = "mpp4";
+			marvell,function = "gpio";
+		};
+	};
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts

@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "iEi Puzzle-M901";
+	compatible = "iei,puzzle-m901",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp1_i2c0;
+		i2c1 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		led-boot = &led_power;
+		led-failsafe = &led_info;
+		led-running = &led_power;
+		led-upgrade = &led_info;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&cp0_uart0 {
+	status = "okay";
+
+	puzzle-mcu {
+		compatible = "iei,wt61p803-puzzle";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		current-speed = <115200>;
+		enable-beep;
+		status = "okay";
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			led@0 {
+				reg = <0>;
+				label = "white:network";
+				active-low;
+			};
+
+			led@1 {
+				reg = <1>;
+				label = "green:cloud";
+				active-low;
+			};
+
+			led_info: led@2 {
+				reg = <2>;
+				label = "orange:info";
+				active-low;
+			};
+
+			led_power: led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_POWER;
+				color = <LED_COLOR_ID_YELLOW>;
+				active-low;
+				default-state = "on";
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0: fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <0 159 195 211 223 241 255>;
+			};
+		};
+	};
+};
+
+&ap_thermal_ic {
+	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
+};
+
+&cp0_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+	status = "okay";
+};
+
+&cp0_xmdio {
+	status = "okay";
+	cp0_nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp0_nbaset_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp0_nbaset_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy2 0>;
+	phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy4 1>;
+	phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy5 2>;
+	phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+		wakeup-source;
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <2>;
+	num-viewport = <8>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,          /* control */
+	      <0x2000000 0x1000000>;    /* CS0 */
+	status = "okay";
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <40000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x1f0000>;
+			};
+			partition@1f0000 {
+				label = "U-Boot ENV Factory";
+				reg = <0x1f0000 0x10000>;
+			};
+			partition@200000 {
+				label = "Reserved";
+				reg = <0x200000 0x1f0000>;
+			};
+			partition@3f0000 {
+				label = "U-Boot ENV";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "okay";
+};
+
+&cp1_xmdio {
+	status = "okay";
+	cp1_nbaset_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp1_nbaset_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp1_nbaset_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy2 0>;
+	phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy4 1>;
+	phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy5 2>;
+	phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_sata0 {
+	status = "okay";
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp1_comphy0 1>;
+	};
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+		cp1_sfp_pins: sfp-pins {
+			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts

@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9130.dtsi"
+#include "puzzle-thermal.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "iEi Puzzle-M902";
+	compatible = "iei,puzzle-m902",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp1_i2c0;
+		i2c1 = &cp0_i2c0;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+		ethernet6 = &cp2_eth0;
+		ethernet7 = &cp2_eth1;
+		ethernet8 = &cp2_eth2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		led-boot = &led_power;
+		led-failsafe = &led_info;
+		led-running = &led_power;
+		led-upgrade = &led_info;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus0>;
+	};
+
+	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus1>;
+	};
+
+	cp2_sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp2_sfpp0_i2c>;
+		los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&cp0_uart0 {
+	status = "okay";
+
+	puzzle-mcu {
+		compatible = "iei,wt61p803-puzzle";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		current-speed = <115200>;
+		enable-beep;
+		status = "okay";
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			led@0 {
+				reg = <0>;
+				label = "white:network";
+				active-low;
+			};
+
+			led@1 {
+				reg = <1>;
+				label = "green:cloud";
+				active-low;
+			};
+
+			led_info: led@2 {
+				reg = <2>;
+				label = "orange:info";
+				active-low;
+			};
+
+			led_power: led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_POWER;
+				color = <LED_COLOR_ID_YELLOW>;
+				active-low;
+				default-state = "on";
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0: fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <0 159 195 211 223 241 255>;
+			};
+		};
+	};
+};
+
+&ap_thermal_ic {
+	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
+};
+
+&cp0_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
+};
+
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+	status = "okay";
+};
+
+&cp0_xmdio {
+	status = "okay";
+	cp0_nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp0_nbaset_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp0_nbaset_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp0_comphy2 0>;
+	phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy4 1>;
+	phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy1 2>;
+	phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+		wakeup-source;
+	};
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_sata0 {
+	status = "okay";
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp0_comphy0 1>;
+	};
+};
+
+&cp0_pcie2 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	phys = <&cp0_comphy5 2>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,          /* control */
+	      <0x2000000 0x1000000>;    /* CS0 */
+	status = "okay";
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <40000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x1f0000>;
+			};
+			partition@1f0000 {
+				label = "U-Boot ENV Factory";
+				reg = <0x1f0000 0x10000>;
+			};
+			partition@200000 {
+				label = "Reserved";
+				reg = <0x200000 0x1f0000>;
+			};
+			partition@3f0000 {
+				label = "U-Boot ENV";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	phys = <&cp0_comphy3 1>;
+	phy-names = "usb";
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "okay";
+};
+
+&cp1_xmdio {
+	status = "okay";
+	cp1_nbaset_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp1_nbaset_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp1_nbaset_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp1_comphy2 0>;
+	phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy4 1>;
+	phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy1 2>;
+	phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
+};
+
+/*
+ * Instantiate the second connected CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+	status = "okay";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+&cp2_xmdio {
+	status = "okay";
+	cp2_nbaset_phy0: ethernet-phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp2_nbaset_phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp2_nbaset_phy2: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp2_comphy2 0>;
+	phy = <&cp2_nbaset_phy0>;
+};
+
+&cp2_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp2_comphy4 1>;
+	phy = <&cp2_nbaset_phy1>;
+};
+
+&cp2_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp2_comphy1 2>;
+	phy = <&cp2_nbaset_phy2>;
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_i2c0 {
+	clock-frequency = <100000>;
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp2_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp2_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+		};
+	};
+};
+
+&cp2_rtc {
+	status = "disabled";
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp2_i2c0_pins: cp2-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+	};
+};
+
+&cp2_thermal_ic {
+	PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
+};

target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi

@@ -0,0 +1,68 @@
+#define PUZZLE_FAN_THERMAL(_cname, _fan)					\
+	polling-delay-passive = <500>;						\
+	polling-delay = <1000>;							\
+										\
+	trips {									\
+		cpu-hot {							\
+			temperature = <75000>;					\
+			hysteresis = <5000>;					\
+			type = "hot";						\
+		};								\
+		_cname##_active_full: cpu-active-full {				\
+			temperature = <70000>;					\
+			hysteresis = <5000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_high: cpu-active-high {				\
+			temperature = <65000>;					\
+			hysteresis = <5000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_med: cpu-active-med {				\
+			temperature = <62500>;					\
+			hysteresis = <3000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_low: cpu-active-low {				\
+			temperature = <60000>;					\
+			hysteresis = <3000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_min: cpu-active-min {				\
+			temperature = <55000>;					\
+			hysteresis = <5000>;					\
+			type = "active";					\
+		};								\
+		_cname##_active_idle: cpu-active-idle {				\
+			temperature = <50000>;					\
+			hysteresis = <5000>;					\
+			type = "active";					\
+		};								\
+	};									\
+	cooling-maps {								\
+		cpu-active-full {						\
+			trip = <&_cname##_active_full>;				\
+			cooling-device = <_fan THERMAL_NO_LIMIT			\
+					       THERMAL_NO_LIMIT>;		\
+		};								\
+		cpu-active-high {						\
+			trip = <&_cname##_active_high>;				\
+			cooling-device = <_fan 4 5>;				\
+		};								\
+		cpu-active-med {						\
+			trip = <&_cname##_active_med>;				\
+			cooling-device = <_fan 3 4>;				\
+		};								\
+		cpu-active-low {						\
+			trip = <&_cname##_active_low>;				\
+			cooling-device = <_fan 2 3>;				\
+		};								\
+		cpu-active-min {						\
+			trip = <&_cname##_active_min>;				\
+			cooling-device = <_fan 1 2>;				\
+		};								\
+		cpu-active-idle {						\
+			trip = <&_cname##_active_idle>;				\
+			cooling-device = <_fan 0 0>;				\
+		};								\
+	}

target/linux/mvebu/patches-6.6/000-cpufreq-armada-8k-add-ap807-support.patch

@@ -0,0 +1,59 @@
+From 8eec6e740b564ec5e1da59ab7070b89aa23c9973 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <[email protected]>
+Date: Fri, 16 Jun 2023 12:41:30 +0100
+Subject: [PATCH] cpufreq: armada-8k: add ap807 support
+
+Add support for the Armada AP807 die to armada-8k. This uses a
+different compatible for the CPU clock which needs to be added to
+the cpufreq driver.
+
+This commit takes a different approach to the WindRiver patch
+"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
+of_find_compatible_node() for each compatible, we use a table of
+IDs instead.
+
+Signed-off-by: Russell King (Oracle) <[email protected]>
+Signed-off-by: Viresh Kumar <[email protected]>
+---
+ drivers/cpufreq/armada-8k-cpufreq.c | 16 +++++++++-------
+ 1 file changed, 9 insertions(+), 7 deletions(-)
+
+--- a/drivers/cpufreq/armada-8k-cpufreq.c
++++ b/drivers/cpufreq/armada-8k-cpufreq.c
+@@ -21,6 +21,13 @@
+ #include <linux/pm_opp.h>
+ #include <linux/slab.h>
+ 
++static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
++	{ .compatible = "marvell,ap806-cpu-clock" },
++	{ .compatible = "marvell,ap807-cpu-clock" },
++	{ },
++};
++MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
++
+ /*
+  * Setup the opps list with the divider for the max frequency, that
+  * will be filled at runtime.
+@@ -127,7 +134,8 @@ static int __init armada_8k_cpufreq_init
+ 	struct device_node *node;
+ 	struct cpumask cpus;
+ 
+-	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
++	node = of_find_matching_node_and_match(NULL, armada_8k_cpufreq_of_match,
++					       NULL);
+ 	if (!node || !of_device_is_available(node)) {
+ 		of_node_put(node);
+ 		return -ENODEV;
+@@ -204,12 +212,6 @@ static void __exit armada_8k_cpufreq_exi
+ }
+ module_exit(armada_8k_cpufreq_exit);
+ 
+-static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
+-	{ .compatible = "marvell,ap806-cpu-clock" },
+-	{ },
+-};
+-MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
+-
+ MODULE_AUTHOR("Gregory Clement <[email protected]>");
+ MODULE_DESCRIPTION("Armada 8K cpufreq driver");
+ MODULE_LICENSE("GPL");

target/linux/mvebu/patches-6.6/100-aardvark-workaround-PCIe.patch

@@ -0,0 +1,81 @@
+Subject: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
+Date:   Tue,  2 Aug 2022 14:38:16 +0200
+Message-Id: <[email protected]>
+X-Mailer: git-send-email 2.20.1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Precedence: bulk
+List-ID: <linux-pci.vger.kernel.org>
+X-Mailing-List: [email protected]
+
+Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
+document describes in erratum 3.12 PCIe Completion Timeout (Ref #: 251),
+that PCIe IP does not support a strong-ordered model for inbound posted vs.
+outbound completion.
+
+As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux Control
+register must be set. It disables the ordering check in the core between
+Completions and Posted requests received from the link.
+
+Marvell also suggests to do full memory barrier at the beginning of
+aardvark summary interrupt handler before calling interrupt handlers of
+endpoint drivers in order to minimize the risk for the race condition
+documented in the Erratum between the DMA done status reading and the
+completion of writing to the host memory.
+
+More details about this issue and suggested workarounds are in discussion:
+https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u
+
+It was reported that enabling this workaround fixes instability issues and
+"Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with Qualcomm
+QCA6335 chip under significant load which were caused by interrupt status
+stuck in the outbound CMPLT queue traced back to this erratum.
+
+This workaround fixes also kernel panic triggered after some minutes of
+usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip:
+
+    Internal error: synchronous external abort: 96000210 [#1] SMP
+    Kernel panic - not syncing: Fatal exception in interrupt
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Signed-off-by: Pali Rohár <[email protected]>
+Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
+Cc: [email protected]
+---
+ drivers/pci/controller/pci-aardvark.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/pci/controller/pci-aardvark.c
++++ b/drivers/pci/controller/pci-aardvark.c
+@@ -212,6 +212,8 @@ enum {
+ };
+ 
+ #define VENDOR_ID_REG				(LMI_BASE_ADDR + 0x44)
++#define DEBUG_MUX_CTRL_REG			(LMI_BASE_ADDR + 0x208)
++#define     DIS_ORD_CHK				BIT(30)
+ 
+ /* PCIe core controller registers */
+ #define CTRL_CORE_BASE_ADDR			0x18000
+@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad
+ 		PCIE_CORE_CTRL2_TD_ENABLE;
+ 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+ 
++	/* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */
++	reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG);
++	reg |= DIS_ORD_CHK;
++	advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG);
++
+ 	/* Set lane X1 */
+ 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ 	reg &= ~LANE_CNT_MSK;
+@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler
+ 	struct advk_pcie *pcie = arg;
+ 	u32 status;
+ 
++	/* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */
++	mb();
++
+ 	status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
+ 	if (!(status & PCIE_IRQ_CORE_INT))
+ 		return IRQ_NONE;

target/linux/mvebu/patches-6.6/105-power-reset-linkstation-poweroff-add-ls220de.patch

@@ -0,0 +1,15 @@
+--- a/drivers/power/reset/linkstation-poweroff.c
++++ b/drivers/power/reset/linkstation-poweroff.c
+@@ -142,6 +142,12 @@ static void linkstation_poweroff(void)
+ }
+ 
+ static const struct of_device_id ls_poweroff_of_match[] = {
++	{ .compatible = "buffalo,ls220d",
++	  .data = &linkstation_power_off_cfg,
++	},
++	{ .compatible = "buffalo,ls220de",
++	  .data = &linkstation_power_off_cfg,
++	},
+ 	{ .compatible = "buffalo,ls421d",
+ 	  .data = &linkstation_power_off_cfg,
+ 	},

target/linux/mvebu/patches-6.6/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch

@@ -0,0 +1,279 @@
+From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
+From: Adrian Panella <[email protected]>
+Date: Thu, 9 Mar 2017 09:37:17 +0100
+Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
+
+The command-line arguments provided by the boot loader will be
+appended to a new device tree property: bootloader-args.
+If there is a property "append-rootblock" in DT under /chosen
+and a root= option in bootloaders command line it will be parsed
+and added to DT bootargs with the form: <append-rootblock>XX.
+Only command line ATAG will be processed, the rest of the ATAGs
+sent by bootloader will be ignored.
+This is usefull in dual boot systems, to get the current root partition
+without afecting the rest of the system.
+
+Signed-off-by: Adrian Panella <[email protected]>
+
+This patch has been modified to be mvebu specific. The original patch 
+did not pass the bootloader cmdline on if no append-rootblock stanza 
+was found, resulting in blank cmdline and failure to boot.
+
+Signed-off-by: Michael Gray <[email protected]>
+---
+ arch/arm/Kconfig                        | 11 ++++
+ arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
+ init/main.c                             | 16 +++++
+ 3 files changed, 111 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1587,6 +1587,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+ 	  The command-line arguments provided by the boot loader will be
+ 	  appended to the the device tree bootargs property.
+ 
++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
++	bool "Append rootblock parsing bootloader's kernel arguments"
++	help
++	  The command-line arguments provided by the boot loader will be
++	  appended to a new device tree property: bootloader-args.
++	  If there is a property "append-rootblock" in DT under /chosen 
++	  and a root= option in bootloaders command line it will be parsed 
++	  and added to DT bootargs with the form: <append-rootblock>XX.
++	  Only command line ATAG will be processed, the rest of the ATAGs
++	  sent by bootloader will be ignored.
++
+ endchoice
+ 
+ config CMDLINE
+--- a/arch/arm/boot/compressed/atags_to_fdt.c
++++ b/arch/arm/boot/compressed/atags_to_fdt.c
+@@ -5,6 +5,8 @@
+ 
+ #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
+ #define do_extend_cmdline 1
++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++#define do_extend_cmdline 1
+ #else
+ #define do_extend_cmdline 0
+ #endif
+@@ -20,6 +22,7 @@ static int node_offset(void *fdt, const
+ 	return offset;
+ }
+ 
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ static int setprop(void *fdt, const char *node_path, const char *property,
+ 		   void *val_array, int size)
+ {
+@@ -28,6 +31,7 @@ static int setprop(void *fdt, const char
+ 		return offset;
+ 	return fdt_setprop(fdt, offset, property, val_array, size);
+ }
++#endif
+ 
+ static int setprop_string(void *fdt, const char *node_path,
+ 			  const char *property, const char *string)
+@@ -38,6 +42,7 @@ static int setprop_string(void *fdt, con
+ 	return fdt_setprop_string(fdt, offset, property, string);
+ }
+ 
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ static int setprop_cell(void *fdt, const char *node_path,
+ 			const char *property, uint32_t val)
+ {
+@@ -46,6 +51,7 @@ static int setprop_cell(void *fdt, const
+ 		return offset;
+ 	return fdt_setprop_cell(fdt, offset, property, val);
+ }
++#endif
+ 
+ static const void *getprop(const void *fdt, const char *node_path,
+ 			   const char *property, int *len)
+@@ -58,6 +64,7 @@ static const void *getprop(const void *f
+ 	return fdt_getprop(fdt, offset, property, len);
+ }
+ 
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ static uint32_t get_cell_size(const void *fdt)
+ {
+ 	int len;
+@@ -69,6 +76,74 @@ static uint32_t get_cell_size(const void
+ 	return cell_size;
+ }
+ 
++#endif
++
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++
++static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
++{
++	const char *ptr, *end;
++	const char *root="root=";
++	int i, l;
++	const char *rootblock;
++
++	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
++	ptr = str - 1;
++
++	do {
++		//first find an 'r' at the begining or after a space
++		do {
++			ptr++;
++			ptr = strchr(ptr, 'r');
++			if (!ptr)
++				goto no_append;
++
++		} while (ptr != str && *(ptr-1) != ' ');
++
++		//then check for the rest
++		for(i = 1; i <= 4; i++)
++			if(*(ptr+i) != *(root+i)) break;
++
++	} while (i != 5);
++
++	end = strchr(ptr, ' ');
++	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
++
++	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
++	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
++	ptr = end + 1;
++
++	/* if append-rootblock property is set use it to append to command line */
++	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
++	if (rootblock == NULL)
++		goto no_append;
++
++	if (*dest != ' ') {
++		*dest = ' ';
++		dest++;
++		len++;
++	}
++
++	if (len + l + i <= COMMAND_LINE_SIZE) {
++		memcpy(dest, rootblock, l);
++		dest += l - 1;
++		memcpy(dest, ptr, i);
++		dest += i;
++	}
++
++	return dest;
++
++no_append:
++	len = strlen(str);
++	if (len + 1 < COMMAND_LINE_SIZE) {
++		memcpy(dest, str, len);
++		dest += len;
++	}
++
++	return dest;
++}
++#endif
++
+ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
+ {
+ 	char cmdline[COMMAND_LINE_SIZE];
+@@ -88,18 +163,28 @@ static void merge_fdt_bootargs(void *fdt
+ 
+ 	/* and append the ATAG_CMDLINE */
+ 	if (fdt_cmdline) {
++
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++		//save original bootloader args
++		//and append ubi.mtd with root partition number to current cmdline
++		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
++		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
++
++#else
+ 		len = strlen(fdt_cmdline);
+ 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ 			*ptr++ = ' ';
+ 			memcpy(ptr, fdt_cmdline, len);
+ 			ptr += len;
+ 		}
++#endif
+ 	}
+ 	*ptr = '\0';
+ 
+ 	setprop_string(fdt, "/chosen", "bootargs", cmdline);
+ }
+ 
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ static void hex_str(char *out, uint32_t value)
+ {
+ 	uint32_t digit;
+@@ -117,6 +202,7 @@ static void hex_str(char *out, uint32_t
+ 	}
+ 	*out = '\0';
+ }
++#endif
+ 
+ /*
+  * Convert and fold provided ATAGs into the provided FDT.
+@@ -131,9 +217,11 @@ int atags_to_fdt(void *atag_list, void *
+ 	struct tag *atag = atag_list;
+ 	/* In the case of 64 bits memory size, need to reserve 2 cells for
+ 	 * address and size for each bank */
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ 	__be32 mem_reg_property[2 * 2 * NR_BANKS];
+-	int memcount = 0;
+-	int ret, memsize;
++	int memsize, memcount = 0;
++#endif
++	int ret;
+ 
+ 	/* make sure we've got an aligned pointer */
+ 	if ((u32)atag_list & 0x3)
+@@ -168,7 +256,9 @@ int atags_to_fdt(void *atag_list, void *
+ 			else
+ 				setprop_string(fdt, "/chosen", "bootargs",
+ 					       atag->u.cmdline.cmdline);
+-		} else if (atag->hdr.tag == ATAG_MEM) {
++		}
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
++		else if (atag->hdr.tag == ATAG_MEM) {
+ 			if (memcount >= sizeof(mem_reg_property)/4)
+ 				continue;
+ 			if (!atag->u.mem.size)
+@@ -212,6 +302,10 @@ int atags_to_fdt(void *atag_list, void *
+ 		setprop(fdt, "/memory", "reg", mem_reg_property,
+ 			4 * memcount * memsize);
+ 	}
++#else
++
++	}
++#endif
+ 
+ 	return fdt_pack(fdt);
+ }
+--- a/init/main.c
++++ b/init/main.c
+@@ -112,6 +112,10 @@
+ 
+ #include <kunit/test.h>
+ 
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++#include <linux/of.h>
++#endif
++
+ static int kernel_init(void *);
+ 
+ extern void init_IRQ(void);
+@@ -993,6 +997,18 @@ asmlinkage __visible void __init __no_sa
+ 	page_alloc_init();
+ 
+ 	pr_notice("Kernel command line: %s\n", saved_command_line);
++
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++	//Show bootloader's original command line for reference
++	if(of_chosen) {
++		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
++		if(prop)
++			pr_notice("Bootloader command line (ignored): %s\n", prop);
++		else
++			pr_notice("Bootloader command line not present\n");
++	}
++#endif
++
+ 	/* parameters may set static keys */
+ 	jump_label_init();
+ 	parse_early_param();

target/linux/mvebu/patches-6.6/301-mvebu-armada-38x-enable-libata-leds.patch

@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -66,6 +66,7 @@ config MACH_ARMADA_38X
+ 	select HAVE_ARM_TWD if SMP
+ 	select MACH_MVEBU_V7
+ 	select PINCTRL_ARMADA_38X
++	select ARCH_WANT_LIBATA_LEDS
+ 	help
+ 	  Say 'Y' here if you want your kernel to support boards based
+ 	  on the Marvell Armada 380/385 SoC with device tree.

target/linux/mvebu/patches-6.6/302-add_powertables.patch

@@ -0,0 +1,770 @@
+--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
+@@ -214,11 +214,19 @@
+ &pcie1 {
+ 	/* Marvell 88W8864, 5GHz-only */
+ 	status = "okay";
++
++	mwlwifi {
++		marvell,2ghz = <0>;
++	};
+ };
+ 
+ &pcie2 {
+ 	/* Marvell 88W8864, 2GHz-only */
+ 	status = "okay";
++
++	mwlwifi {
++		marvell,5ghz = <0>;
++	};
+ };
+ 
+ &pinctrl {
+--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+@@ -142,3 +142,205 @@
+ 		};
+ 	};
+ };
++
++&pcie1 {
++	mwlwifi {
++		marvell,chainmask = <2 2>;
++		marvell,powertable {
++			AU =
++				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
++				<149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
++				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
++			CA =
++				<36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++				<40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++				<44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++				<48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
++			CN =
++				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
++				<165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
++			ETSI =
++				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
++				<149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
++			FCC =
++				<36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
++				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
++		};
++	};
++};
++
++&pcie2 {
++	mwlwifi {
++		marvell,chainmask = <2 2>;
++		marvell,powertable {
++			AU =
++				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++			CA =
++				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
++				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
++				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
++			CN =
++				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++			ETSI =
++				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
++			FCC =
++				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
++		};
++	};
++};
+--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+@@ -142,3 +142,205 @@
+ 		};
+ 	};
+ };
++
++&pcie1 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++		marvell,powertable {
++			AU =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
++			CA =
++				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++			CN =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
++			ETSI =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
++			FCC =
++				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
++				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++		};
++	};
++};
++
++&pcie2 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++		marvell,powertable {
++			AU =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			CA =
++				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++			CN =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			ETSI =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			FCC =
++				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++		};
++	};
++};
+--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+@@ -142,3 +142,205 @@
+ 		};
+ 	};
+ };
++
++&pcie1 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++		marvell,powertable {
++			AU =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
++				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
++			CA =
++				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++			CN =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
++				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
++			ETSI =
++				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
++				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
++			FCC =
++				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
++				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
++				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
++				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
++				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
++				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
++		};
++	};
++};
++
++&pcie2 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++		marvell,powertable {
++			AU =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			CA =
++				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++			CN =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			ETSI =
++				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
++				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
++			FCC =
++				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
++				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
++				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
++		};
++	};
++};
+--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
+@@ -157,6 +157,18 @@
+ 	};
+ };
+ 
++&pcie1 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++	};
++};
++
++&pcie2 {
++	mwlwifi {
++		marvell,chainmask = <4 4>;
++	};
++};
++
+ &sdhci {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&sdhci_pins>;
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -223,12 +223,100 @@
+ 	pcie@2,0 {
+ 		/* Port 0, Lane 1 */
+ 		status = "okay";
++
++		mwlwifi {
++			marvell,5ghz = <0>;
++			marvell,chainmask = <4 4>;
++			marvell,powertable {
++				FCC =
++					<1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
++					<2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
++					<11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
++
++				ETSI =
++					<1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
++					<13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
++			};
++		};
+ 	};
+ 
+ 	/* Second mini-PCIe port */
+ 	pcie@3,0 {
+ 		/* Port 0, Lane 3 */
+ 		status = "okay";
++
++		mwlwifi {
++			marvell,2ghz = <0>;
++			marvell,chainmask = <4 4>;
++			marvell,powertable {
++				FCC =
++					<36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++					<40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++					<44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++					<48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
++					<52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++					<56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++					<60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++					<64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
++					<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
++					<149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++					<153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++					<157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++					<161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
++					<165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
++
++				ETSI =
++					<36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
++					<149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
++			};
++		};
+ 	};
+ };
+ 

target/linux/mvebu/patches-6.6/304-revert_i2c_delay.patch

@@ -0,0 +1,15 @@
+--- a/arch/arm/boot/dts/armada-xp.dtsi
++++ b/arch/arm/boot/dts/armada-xp.dtsi
+@@ -237,12 +237,10 @@
+ };
+ 
+ &i2c0 {
+-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ 	reg = <0x11000 0x100>;
+ };
+ 
+ &i2c1 {
+-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ 	reg = <0x11100 0x100>;
+ };
+ 

target/linux/mvebu/patches-6.6/305-armada-385-rd-mtd-partitions.patch

@@ -0,0 +1,19 @@
+--- a/arch/arm/boot/dts/armada-388-rd.dts
++++ b/arch/arm/boot/dts/armada-388-rd.dts
+@@ -103,6 +103,16 @@
+ 		compatible = "st,m25p128", "jedec,spi-nor";
+ 		reg = <0>; /* Chip select 0 */
+ 		spi-max-frequency = <108000000>;
++
++		partition@0 {
++			label = "uboot";
++			reg = <0 0x400000>;
++		};
++
++		partition@1 {
++			label = "firmware";
++			reg = <0x400000 0xc00000>;
++		};
+ 	};
+ };
+ 

target/linux/mvebu/patches-6.6/306-ARM-mvebu-385-ap-Add-partitions.patch

@@ -0,0 +1,35 @@
+From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <[email protected]>
+Date: Tue, 13 Jan 2015 11:14:09 +0100
+Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
+
+Signed-off-by: Maxime Ripard <[email protected]>
+---
+ arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-385-db-ap.dts
++++ b/arch/arm/boot/dts/armada-385-db-ap.dts
+@@ -218,19 +218,19 @@
+ 			#size-cells = <1>;
+ 
+ 			partition@0 {
+-				label = "U-Boot";
++				label = "u-boot";
+ 				reg = <0x00000000 0x00800000>;
+ 				read-only;
+ 			};
+ 
+ 			partition@800000 {
+-				label = "uImage";
++				label = "kernel";
+ 				reg = <0x00800000 0x00400000>;
+ 				read-only;
+ 			};
+ 
+ 			partition@c00000 {
+-				label = "Root";
++				label = "ubi";
+ 				reg = <0x00c00000 0x3f400000>;
+ 			};
+ 		};

target/linux/mvebu/patches-6.6/307-armada-xp-linksys-mamba-broken-idle.patch

@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -483,3 +483,7 @@
+ 		};
+ 	};
+ };
++
++&coherencyfab {
++	broken-idle;
++};

target/linux/mvebu/patches-6.6/308-armada-xp-linksys-mamba-wan.patch

@@ -0,0 +1,11 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -385,7 +385,7 @@
+ 
+ 			port@4 {
+ 				reg = <4>;
+-				label = "internet";
++				label = "wan";
+ 			};
+ 
+ 			port@5 {

target/linux/mvebu/patches-6.6/309-linksys-status-led.patch

@@ -0,0 +1,50 @@
+--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
+@@ -14,6 +14,13 @@
+ 	compatible = "linksys,armada385", "marvell,armada385",
+ 		     "marvell,armada380";
+ 
++	aliases {
++		led-boot = &led_power;
++		led-failsafe = &led_power;
++		led-running = &led_power;
++		led-upgrade = &led_power;
++	};
++
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
+@@ -71,7 +78,7 @@
+ 		pinctrl-0 = <&gpio_leds_pins>;
+ 		pinctrl-names = "default";
+ 
+-		power {
++		led_power: power {
+ 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ 			default-state = "on";
+ 		};
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -26,6 +26,13 @@
+ 	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+ 		     "marvell,armadaxp", "marvell,armada-370-xp";
+ 
++	aliases {
++		led-boot = &led_power;
++		led-failsafe = &led_power;
++		led-running = &led_power;
++		led-upgrade = &led_power;
++	};
++
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200";
+ 		stdout-path = &uart0;
+@@ -195,7 +202,7 @@
+ 		pinctrl-0 = <&power_led_pin>;
+ 		pinctrl-names = "default";
+ 
+-		power {
++		led_power: power {
+ 			label = "mamba:white:power";
+ 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ 			default-state = "on";

target/linux/mvebu/patches-6.6/310-linksys-use-eth0-as-cpu-port.patch

@@ -0,0 +1,25 @@
+--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
+@@ -116,7 +116,7 @@
+ };
+ 
+ &eth2 {
+-	status = "okay";
++	status = "disabled";
+ 	phy-mode = "sgmii";
+ 	buffer-manager = <&bm>;
+ 	bm,pool-long = <2>;
+@@ -200,10 +200,10 @@
+ 				label = "wan";
+ 			};
+ 
+-			port@5 {
+-				reg = <5>;
++			port@6 {
++				reg = <6>;
+ 				label = "cpu";
+-				ethernet = <&eth2>;
++				ethernet = <&eth0>;
+ 
+ 				fixed-link {
+ 					speed = <1000>;

target/linux/mvebu/patches-6.6/311-adjust-compatible-for-linksys.patch

@@ -0,0 +1,68 @@
+--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
+@@ -12,8 +12,8 @@
+ 
+ / {
+ 	model = "Linksys WRT3200ACM";
+-	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+-		     "marvell,armada380";
++	compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
++		     "marvell,armada385", "marvell,armada380";
+ };
+ 
+ &expander0 {
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -22,9 +22,10 @@
+ #include "armada-xp-mv78230.dtsi"
+ 
+ / {
+-	model = "Linksys WRT1900AC";
+-	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+-		     "marvell,armadaxp", "marvell,armada-370-xp";
++	model = "Linksys WRT1900AC v1";
++	compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
++		     "marvell,armadaxp-mv78230", "marvell,armadaxp",
++		     "marvell,armada-370-xp";
+ 
+ 	aliases {
+ 		led-boot = &led_power;
+--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+@@ -9,8 +9,9 @@
+ #include "armada-385-linksys.dtsi"
+ 
+ / {
+-	model = "Linksys WRT1900ACv2";
+-	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
++	model = "Linksys WRT1900AC v2";
++	compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
++		     "linksys,armada385", "marvell,armada385",
+ 		     "marvell,armada380";
+ };
+ 
+--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+@@ -10,8 +10,8 @@
+ 
+ / {
+ 	model = "Linksys WRT1200AC";
+-	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+-		     "marvell,armada380";
++	compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
++		     "marvell,armada385", "marvell,armada380";
+ };
+ 
+ &expander0 {
+--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
++++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+@@ -10,7 +10,8 @@
+ 
+ / {
+ 	model = "Linksys WRT1900ACS";
+-	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
++	compatible = "linksys,wrt1900acs", "linksys,shelby",
++		     "linksys,armada385", "marvell,armada385",
+ 		     "marvell,armada380";
+ };
+ 

target/linux/mvebu/patches-6.6/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch

@@ -0,0 +1,87 @@
+From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
+From: Russell King <[email protected]>
+Date: Tue, 29 Nov 2016 10:15:45 +0000
+Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
+
+Signed-off-by: Russell King <[email protected]>
+---
+ .../arm/boot/dts/armada-388-clearfog-base.dts |  1 +
+ .../armada-38x-solidrun-microsom-emmc.dtsi    | 62 +++++++++++++++++++
+ 2 files changed, 63 insertions(+)
+ create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
+
+--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
++++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
+@@ -7,6 +7,7 @@
+ 
+ /dts-v1/;
+ #include "armada-388-clearfog.dtsi"
++#include "armada-38x-solidrun-microsom-emmc.dtsi"
+ 
+ / {
+ 	model = "SolidRun Clearfog Base A1";
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
+@@ -0,0 +1,62 @@
++/*
++ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
++ *
++ *  Copyright (C) 2015 Russell King
++ *
++ * This board is in development; the contents of this file work with
++ * the A1 rev 2.0 of the board, which does not represent final
++ * production board.  Things will change, don't expect this file to
++ * remain compatible info the future.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License
++ *     version 2 as published by the Free Software Foundation.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++/ {
++	soc {
++		internal-regs {
++			sdhci@d8000 {
++				bus-width = <4>;
++				no-1-8-v;
++				non-removable;
++				pinctrl-0 = <&microsom_sdhci_pins>;
++				pinctrl-names = "default";
++				status = "okay";
++				wp-inverted;
++			};
++		};
++	};
++};

target/linux/mvebu/patches-6.6/313-helios4-dts-status-led-alias.patch

@@ -0,0 +1,28 @@
+--- a/arch/arm/boot/dts/armada-388-helios4.dts
++++ b/arch/arm/boot/dts/armada-388-helios4.dts
+@@ -15,6 +15,13 @@
+ 	model = "Helios4";
+ 	compatible = "kobol,helios4", "marvell,armada388",
+ 		"marvell,armada385", "marvell,armada380";
++		
++	aliases {
++		led-boot = &led_status;
++		led-failsafe = &led_status;
++		led-running = &led_status;
++		led-upgrade = &led_status;
++	};
+ 
+ 	memory {
+ 		device_type = "memory";
+@@ -73,10 +80,9 @@
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&helios_system_led_pins>;
+ 
+-		status-led {
++		led_status: status-led {
+ 			label = "helios4:green:status";
+ 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+-			linux,default-trigger = "heartbeat";
+ 			default-state = "on";
+ 		};
+ 

target/linux/mvebu/patches-6.6/314-arm64-dts-marvell-enable-heartbeat-LED-by-default.patch

@@ -0,0 +1,22 @@
+From: Tomasz Maciej Nowak <[email protected]>
+Date: Fri, 7 Jul 2023 19:06:05 +0200
+Subject: [PATCH] arm64: dts: marvell: enable heartbeat LED by default
+
+Some boards could be placed in an enclosure, so enable LED18 by default,
+since that'll be the only visible indicator that the board is operating.
+
+Signed-off-by: Tomasz Maciej Nowak <[email protected]>
+---
+ arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
+@@ -25,6 +25,7 @@
+ 			function = LED_FUNCTION_HEARTBEAT;
+ 			color = <LED_COLOR_ID_GREEN>;
+ 			linux,default-trigger = "heartbeat";
++			default-state = "on";
+ 		};
+ 	};
+ };

target/linux/mvebu/patches-6.6/315-armada-xp-linksys-mamba-resize-kernel.patch

@@ -0,0 +1,37 @@
+From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
+From: Tad <[email protected]>
+Date: Fri, 5 Feb 2021 22:32:11 -0500
+Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
+ partition to 4MB
+
+Signed-off-by: Tad Davanzo <[email protected]>
+---
+ arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -454,9 +454,9 @@
+ 				reg = <0xa00000 0x2800000>;  /* 40MB */
+ 			};
+ 
+-			partition@d00000 {
++			partition@e00000 {
+ 				label = "rootfs1";
+-				reg = <0xd00000 0x2500000>;  /* 37MB */
++				reg = <0xe00000 0x2400000>;  /* 36MB */
+ 			};
+ 
+ 			/* kernel2 overlaps with rootfs2 by design */
+@@ -465,9 +465,9 @@
+ 				reg = <0x3200000 0x2800000>; /* 40MB */
+ 			};
+ 
+-			partition@3500000 {
++			partition@3600000 {
+ 				label = "rootfs2";
+-				reg = <0x3500000 0x2500000>; /* 37MB */
++				reg = <0x3600000 0x2400000>; /* 36MB */
+ 			};
+ 
+ 			/*

target/linux/mvebu/patches-6.6/316-armada-370-dts-fix-crypto-engine.patch

@@ -0,0 +1,29 @@
+--- a/arch/arm/boot/dts/armada-370.dtsi
++++ b/arch/arm/boot/dts/armada-370.dtsi
+@@ -254,7 +254,7 @@
+ 				clocks = <&gateclk 23>;
+ 				clock-names = "cesa0";
+ 				marvell,crypto-srams = <&crypto_sram>;
+-				marvell,crypto-sram-size = <0x7e0>;
++				marvell,crypto-sram-size = <0x800>;
+ 			};
+ 		};
+ 
+@@ -275,12 +275,17 @@
+ 			 * cpuidle workaround.
+ 			 */
+ 			idle-sram@0 {
++				status = "disabled";
+ 				reg = <0x0 0x20>;
+ 			};
+ 		};
+ 	};
+ };
+ 
++&coherencyfab {
++	broken-idle;
++};
++
+ /*
+  * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+  * board level if a different configuration is used.

target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch

@@ -0,0 +1,134 @@
+--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
++++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+@@ -31,6 +31,7 @@
+ 
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
++		append-rootblock = "nullparameter="; /* override the bootloader args */
+ 	};
+ 
+ 	memory@0 {
+@@ -94,6 +95,8 @@
+ 			       status = "okay";
+ 			       phy = <&phy1>;
+ 			       phy-mode = "sgmii";
++		               nvmem-cells = <&macaddr_vendor_0>;
++        		       nvmem-cell-names = "mac-address";
+ 			};
+ 
+ 			sata@a0000 {
+@@ -175,6 +178,24 @@
+ 			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ 		};
+ 	};
++
++	virtual_flash {
++		compatible = "mtd-concat";
++
++		devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				compatible = "openwrt,uimage", "denx,uimage";
++				label = "firmware";
++				reg = <0x0 0x0>;
++			};
++		};
++	};
+ };
+ 
+ &mdio {
+@@ -265,48 +286,52 @@
+ 		reg = <0>; /* Chip select 0 */
+ 		spi-max-frequency = <20000000>;
+ 
+-		/*
+-		 * Warning!
+-		 *
+-		 * Synology u-boot uses its compiled-in environment
+-		 * and it seems Synology did not care to change u-boot
+-		 * default configuration in order to allow saving a
+-		 * modified environment at a sensible location. So,
+-		 * if you do a 'saveenv' under u-boot, your modified
+-		 * environment will be saved at 1MB after the start
+-		 * of the flash, i.e. in the middle of the uImage.
+-		 * For that reason, it is strongly advised not to
+-		 * change the default environment, unless you know
+-		 * what you are doing.
+-		 */
+-		partition@0 { /* u-boot */
+-			label = "RedBoot";
+-			reg = <0x00000000 0x000c0000>; /* 768KB */
+-		};
++		partitions {
++			compatible = "fixed-partitions";
+ 
+-		partition@c0000 { /* uImage */
+-			label = "zImage";
+-			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+-		};
++			partition@0 { /* u-boot */
++				label = "u-boot";
++				reg = <0x00000000 0x000c0000>; /* 768KB */
++				read-only;
++			};
+ 
+-		partition@390000 { /* uInitramfs */
+-			label = "rd.gz";
+-			reg = <0x00390000 0x00440000>; /* 4250KB */
+-		};
++			mtd_gap: partition@c0000 { /* gap */
++				label = "gap";
++				reg = <0x000c0000 0x00040000>; /* 256KB */
++			};
+ 
+-		partition@7d0000 { /* MAC address and serial number */
+-			label = "vendor";
+-			reg = <0x007d0000 0x00010000>; /* 64KB */
+-		};
++			partition@100000 { /* u-boot-env */
++				label = "u-boot-env";
++				reg = <0x00100000 0x00010000>; /* 64KB */
++			};
+ 
+-		partition@7e0000 {
+-			label = "RedBoot config";
+-			reg = <0x007e0000 0x00010000>; /* 64KB */
+-		};
++			mtd_kernel: partition@110000 {
++				label = "kernel";
++				reg = <0x00110000 0x006c0000>; /* 6912KB */
++			};
+ 
+-		partition@7f0000 {
+-			label = "FIS directory";
+-			reg = <0x007f0000 0x00010000>; /* 64KB */
++			partition@7d0000 { /* MAC address and serial number */
++				reg = <0x007d0000 0x00010000>; /* 64KB */
++				label = "vendor";
++				read-only;
++
++				compatible = "nvmem-cells";
++
++				nvmem-layout {
++					compatible = "fixed-layout";
++					#address-cells = <1>;
++					#size-cells = <1>;
++
++					macaddr_vendor_0: macaddr@0 {
++						reg = <0x0 0x6>;
++					};
++				};
++			};
++
++			mtd_gap2: partition@7e0000 {
++				label = "gap2";
++				reg = <0x007e0000 0x00020000>; /* 128KB */
++			};
+ 		};
+ 	};
+ };

target/linux/mvebu/patches-6.6/400-find_active_root.patch

@@ -0,0 +1,60 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <[email protected]>
+
+--- a/drivers/mtd/parsers/ofpart_core.c
++++ b/drivers/mtd/parsers/ofpart_core.c
+@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
+ 	return of_get_property(pp, "compatible", NULL);
+ }
+ 
++static int mangled_rootblock;
++
+ static int parse_fixed_partitions(struct mtd_info *master,
+ 				  const struct mtd_partition **pparts,
+ 				  struct mtd_part_parser_data *data)
+@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
+ 	struct device_node *mtd_node;
+ 	struct device_node *ofpart_node;
+ 	const char *partname;
++	const char *owrtpart = "ubi";
+ 	struct device_node *pp;
+ 	int nr_parts, i, ret = 0;
+ 	bool dedicated = true;
+@@ -152,9 +155,13 @@ static int parse_fixed_partitions(struct
+ 		parts[i].size = of_read_number(reg + a_cells, s_cells);
+ 		parts[i].of_node = pp;
+ 
+-		partname = of_get_property(pp, "label", &len);
+-		if (!partname)
+-			partname = of_get_property(pp, "name", &len);
++		if (mangled_rootblock && (i == mangled_rootblock)) {
++			partname = owrtpart;
++		} else {
++			partname = of_get_property(pp, "label", &len);
++			if (!partname)
++				partname = of_get_property(pp, "name", &len);
++		}
+ 		parts[i].name = partname;
+ 
+ 		if (of_get_property(pp, "read-only", &len))
+@@ -271,6 +278,18 @@ static int __init ofpart_parser_init(voi
+ 	return 0;
+ }
+ 
++static int __init active_root(char *str)
++{
++	get_option(&str, &mangled_rootblock);
++
++	if (!mangled_rootblock)
++		return 1;
++
++	return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ 	deregister_mtd_parser(&ofpart_parser);

target/linux/mvebu/patches-6.6/700-mvneta-tx-queue-workaround.patch

@@ -0,0 +1,43 @@
+From: Felix Fietkau <[email protected]>
+Subject: mvneta: tx queue workaround
+
+The hardware queue scheduling is apparently configured with fixed
+priorities, which creates a nasty fairness issue where traffic from one
+CPU can starve traffic from all other CPUs.
+
+Work around this issue by forcing all tx packets to go through one CPU,
+until this issue is fixed properly.
+
+Ref: https://github.com/openwrt/openwrt/issues/5411
+
+Signed-off-by: Felix Fietkau <[email protected]>
+---
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -5233,6 +5233,16 @@ static int mvneta_setup_tc(struct net_de
+ 	}
+ }
+ 
++#ifndef CONFIG_ARM64
++static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
++			       struct net_device *sb_dev)
++{
++	/* XXX: hardware queue scheduling is broken,
++	 * use only one queue until it is fixed */
++	return 0;
++}
++#endif
++
+ static const struct net_device_ops mvneta_netdev_ops = {
+ 	.ndo_open            = mvneta_open,
+ 	.ndo_stop            = mvneta_stop,
+@@ -5243,6 +5253,9 @@ static const struct net_device_ops mvnet
+ 	.ndo_fix_features    = mvneta_fix_features,
+ 	.ndo_get_stats64     = mvneta_get_stats64,
+ 	.ndo_eth_ioctl        = mvneta_ioctl,
++#ifndef CONFIG_ARM64
++	.ndo_select_queue    = mvneta_select_queue,
++#endif
+ 	.ndo_bpf	     = mvneta_xdp,
+ 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
+ 	.ndo_setup_tc	     = mvneta_setup_tc,

target/linux/mvebu/patches-6.6/701-mvpp2-read-mac-address-from-nvmem.patch

@@ -0,0 +1,27 @@
+From: Tobias Schramm <[email protected]>
+Subject: mvpp2: support fetching mac address from nvmem
+
+The mvpp2 driver did not query nvmem for hardware mac addresses. This
+patch adds querying of mac addresses stored in nvmem cells as a further
+fallback option before assigning a random address.
+Purposely added separately to fwnode_get_mac_address() above to maintain
+existing behaviour with builtin adapter mac address still taking
+precedence.
+
+Signed-off-by: Tobias Schramm <[email protected]>
+---
+--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
++++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+@@ -6134,6 +6134,12 @@ static void mvpp2_port_copy_mac_addr(str
+ 		}
+ 	}
+ 
++	if (!of_get_mac_address(to_of_node(fwnode), hw_mac_addr)) {
++		*mac_from = "nvmem cell";
++		eth_hw_addr_set(dev, hw_mac_addr);
++		return;
++	}
++
+ 	*mac_from = "random";
+ 	eth_hw_addr_random(dev);
+ }

target/linux/mvebu/patches-6.6/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch

@@ -0,0 +1,40 @@
+From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
+From: Russell King <[email protected]>
+Date: Sat, 3 Oct 2015 09:13:05 +0100
+Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
+
+The cpuidle ->enter method expects the return value to be the sleep
+state we entered.  Returning negative numbers or other codes is not
+permissible since coupled CPU idle was merged.
+
+At least some of the mvebu_v7_cpu_suspend() implementations return the
+value from cpu_suspend(), which returns zero if the CPU vectors back
+into the kernel via cpu_resume() (the success case), or the non-zero
+return value of the suspend actor, or one (failure cases).
+
+We do not want to be returning the failure case value back to CPU idle
+as that indicates that we successfully entered one of the deeper idle
+states.  Always return zero instead, indicating that we slept for the
+shortest amount of time.
+
+Signed-off-by: Russell King <[email protected]>
+---
+ drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/cpuidle/cpuidle-mvebu-v7.c
++++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
+@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
+ 	ret = mvebu_v7_cpu_suspend(deepidle);
+ 	cpu_pm_exit();
+ 
++	/*
++	 * If we failed to enter the desired state, indicate that we
++	 * slept lightly.
++	 */
+ 	if (ret)
+-		return ret;
++		return 0;
+ 
+ 	return index;
+ }

target/linux/mvebu/patches-6.6/801-pci-mvebu-time-out-reset-on-link-up.patch

@@ -0,0 +1,60 @@
+From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
+From: Russell King <[email protected]>
+Date: Sat, 9 Jul 2016 10:58:16 +0100
+Subject: pci: mvebu: time out reset on link up
+
+If the port reports that the link is up while we are resetting, there's
+little point in waiting for the full duration.
+
+Signed-off-by: Russell King <[email protected]>
+---
+ drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
+ 1 file changed, 14 insertions(+), 6 deletions(-)
+
+--- a/drivers/pci/controller/pci-mvebu.c
++++ b/drivers/pci/controller/pci-mvebu.c
+@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve
+ 
+ 	if (port->reset_gpio) {
+ 		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
++		unsigned int i;
+ 
+ 		of_property_read_u32(port->dn, "reset-delay-us",
+ 				     &reset_udelay);
+@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve
+ 		udelay(100);
+ 
+ 		gpiod_set_value_cansleep(port->reset_gpio, 0);
+-		msleep(reset_udelay / 1000);
++		for (i = 0; i < reset_udelay; i += 1000) {
++			if (mvebu_pcie_link_up(port))
++				break;
++			msleep(1);
++		}
++
++		printk("%s: reset completed in %dus\n", port->name, i);
+ 	}
+ 
+ 	return 0;
+@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf
+ 		if (!child)
+ 			continue;
+ 
+-		ret = mvebu_pcie_powerup(port);
+-		if (ret < 0)
+-			continue;
+-
+ 		port->base = mvebu_pcie_map_registers(pdev, child, port);
+ 		if (IS_ERR(port->base)) {
+ 			dev_err(dev, "%s: cannot map registers\n", port->name);
+ 			port->base = NULL;
+-			mvebu_pcie_powerdown(port);
++			continue;
++		}
++
++		ret = mvebu_pcie_powerup(port);
++		if (ret < 0) {
++			port->base = NULL;
+ 			continue;
+ 		}
+ 

target/linux/mvebu/patches-6.6/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch

@@ -0,0 +1,218 @@
+From aa4a0ccc41997f2da172165c92803abace43bd1c Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:32 +0000
+Subject: [PATCH 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803
+ PUZZLE driver bindings
+
+Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
+drivers. A new vendor prefix is also added accordingly for
+IEI Integration Corp.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 53 ++++++++++++
+ .../leds/iei,wt61p803-puzzle-leds.yaml        | 39 +++++++++
+ .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
+ .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
+ 4 files changed, 176 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
+ create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
+ create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
+@@ -0,0 +1,53 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
++
++maintainers:
++  - Luka Kovacic <[email protected]>
++
++description: |
++  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
++  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
++
++  The HWMON module is a sub-node of the MCU node in the Device Tree.
++
++properties:
++  compatible:
++    const: iei,wt61p803-puzzle-hwmon
++
++  "#address-cells":
++    const: 1
++
++  "#size-cells":
++    const: 0
++
++patternProperties:
++  "^fan-group@[0-1]$":
++    type: object
++    properties:
++      reg:
++        minimum: 0
++        maximum: 1
++        description:
++          Fan group ID
++
++      cooling-levels:
++        minItems: 1
++        maxItems: 255
++        description:
++          Cooling levels for the fans (PWM value mapping)
++    description: |
++      Properties for each fan group.
++    required:
++      - reg
++
++required:
++  - compatible
++  - "#address-cells"
++  - "#size-cells"
++
++additionalProperties: false
+--- /dev/null
++++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
+@@ -0,0 +1,39 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
++
++maintainers:
++  - Luka Kovacic <[email protected]>
++
++description: |
++  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
++  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
++
++  The LED module is a sub-node of the MCU node in the Device Tree.
++
++properties:
++  compatible:
++    const: iei,wt61p803-puzzle-leds
++
++  "#address-cells":
++    const: 1
++
++  "#size-cells":
++    const: 0
++
++  led@0:
++    type: object
++    $ref: common.yaml
++    description: |
++      Properties for a single LED.
++
++required:
++  - compatible
++  - "#address-cells"
++  - "#size-cells"
++
++additionalProperties: false
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
+@@ -0,0 +1,82 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
++
++maintainers:
++  - Luka Kovacic <[email protected]>
++
++description: |
++  IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
++  It's used for controlling system power states, fans, LEDs and temperature
++  sensors.
++
++  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
++  binding documents under the respective subsystem directories.
++
++properties:
++  compatible:
++    const: iei,wt61p803-puzzle
++
++  current-speed:
++    description:
++      Serial bus speed in bps
++    maxItems: 1
++
++  enable-beep: true
++
++  hwmon:
++    $ref: /schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml
++
++  leds:
++    $ref: /schemas/leds/iei,wt61p803-puzzle-leds.yaml
++
++required:
++  - compatible
++  - current-speed
++
++additionalProperties: false
++
++examples:
++  - |
++    #include <dt-bindings/leds/common.h>
++    serial {
++        mcu {
++            compatible = "iei,wt61p803-puzzle";
++            current-speed = <115200>;
++            enable-beep;
++
++            leds {
++                compatible = "iei,wt61p803-puzzle-leds";
++                #address-cells = <1>;
++                #size-cells = <0>;
++
++                led@0 {
++                    reg = <0>;
++                    function = LED_FUNCTION_POWER;
++                    color = <LED_COLOR_ID_BLUE>;
++                };
++            };
++
++            hwmon {
++                compatible = "iei,wt61p803-puzzle-hwmon";
++                #address-cells = <1>;
++                #size-cells = <0>;
++
++                fan-group@0 {
++                    #cooling-cells = <2>;
++                    reg = <0x00>;
++                    cooling-levels = <64 102 170 230 250>;
++                };
++
++                fan-group@1 {
++                    #cooling-cells = <2>;
++                    reg = <0x01>;
++                    cooling-levels = <64 102 170 230 250>;
++                };
++            };
++        };
++    };
+--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
++++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
+@@ -579,6 +579,8 @@ patternProperties:
+     description: IC Plus Corp.
+   "^idt,.*":
+     description: Integrated Device Technologies, Inc.
++  "^iei,.*":
++    description: IEI Integration Corp.
+   "^ifi,.*":
+     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
+   "^ilitek,.*":

target/linux/mvebu/patches-6.6/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch

@@ -0,0 +1,1034 @@
+From 692cfa85272dd12995b427c0a7a585ced5d54f32 Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:33 +0000
+Subject: [PATCH 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
+
+Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some
+IEI Puzzle series devices. The microcontroller controls system power,
+temperature sensors, fans and LEDs.
+
+This driver implements the core functionality for device communication
+over the system serial (serdev bus). It handles MCU messages and the
+internal MCU properties. Some properties can be managed over sysfs.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ drivers/mfd/Kconfig                     |   9 +
+ drivers/mfd/Makefile                    |   1 +
+ drivers/mfd/iei-wt61p803-puzzle.c       | 908 ++++++++++++++++++++++++
+ include/linux/mfd/iei-wt61p803-puzzle.h |  66 ++
+ 4 files changed, 984 insertions(+)
+ create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
+ create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
+
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -2222,6 +2222,15 @@ config SGI_MFD_IOC3
+ 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
+ 	  then say Y. Otherwise say N.
+ 
++config MFD_IEI_WT61P803_PUZZLE
++	tristate "IEI WT61P803 PUZZLE MCU driver"
++	depends on SERIAL_DEV_BUS
++	select MFD_CORE
++	help
++	  IEI WT61P803 PUZZLE is a system power management microcontroller
++	  used for fan control, temperature sensor reading, LED control
++	  and system identification.
++
+ config MFD_INTEL_M10_BMC
+ 	tristate "Intel MAX 10 Board Management Controller"
+ 	depends on SPI_MASTER
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831)	+= rt4831.o
+ obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
+ obj-$(CONFIG_MFD_RT5120)	+= rt5120.o
+ obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
++obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE)  += iei-wt61p803-puzzle.o
+ 
+ obj-$(CONFIG_INTEL_SOC_PMIC)		+= intel_soc_pmic_crc.o
+ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
+--- /dev/null
++++ b/drivers/mfd/iei-wt61p803-puzzle.c
+@@ -0,0 +1,908 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/* IEI WT61P803 PUZZLE MCU Driver
++ * System management microcontroller for fan control, temperature sensor reading,
++ * LED control and system identification on IEI Puzzle series ARM-based appliances.
++ *
++ * Copyright (C) 2020 Sartura Ltd.
++ * Author: Luka Kovacic <[email protected]>
++ */
++
++#include <linux/atomic.h>
++#include <linux/delay.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/mfd/core.h>
++#include <linux/mfd/iei-wt61p803-puzzle.h>
++#include <linux/mod_devicetable.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/property.h>
++#include <linux/sched.h>
++#include <linux/serdev.h>
++#include <linux/slab.h>
++#include <linux/sysfs.h>
++#include <asm/unaligned.h>
++
++/* start, payload and XOR checksum at end */
++#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH	(1 + 20 + 1)
++#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE	512
++
++#define IEI_WT61P803_PUZZLE_MAC_LENGTH			17
++#define IEI_WT61P803_PUZZLE_SN_LENGTH			36
++#define IEI_WT61P803_PUZZLE_VERSION_LENGTH		 6
++#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH		16
++#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH	 8
++#define IEI_WT61P803_PUZZLE_NB_MAC			 8
++
++/* Use HZ as a timeout value throughout the driver */
++#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ
++
++enum iei_wt61p803_puzzle_attribute_type {
++	IEI_WT61P803_PUZZLE_VERSION,
++	IEI_WT61P803_PUZZLE_BUILD_INFO,
++	IEI_WT61P803_PUZZLE_BOOTLOADER_MODE,
++	IEI_WT61P803_PUZZLE_PROTOCOL_VERSION,
++	IEI_WT61P803_PUZZLE_SERIAL_NUMBER,
++	IEI_WT61P803_PUZZLE_MAC_ADDRESS,
++	IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS,
++	IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY,
++	IEI_WT61P803_PUZZLE_POWER_STATUS,
++};
++
++struct iei_wt61p803_puzzle_device_attribute {
++	struct device_attribute dev_attr;
++	enum iei_wt61p803_puzzle_attribute_type type;
++	u8 index;
++};
++
++/**
++ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state
++ * @ac_recovery_status_flag:	AC Recovery Status Flag
++ * @power_loss_recovery:	System recovery after power loss
++ * @power_status:		System Power-on Method
++ */
++struct iei_wt61p803_puzzle_mcu_status {
++	u8 ac_recovery_status_flag;
++	u8 power_loss_recovery;
++	u8 power_status;
++};
++
++/**
++ * struct iei_wt61p803_puzzle_reply - MCU reply
++ * @size:	Size of the MCU reply
++ * @data:	Full MCU reply buffer
++ * @state:	Current state of the packet
++ * @received:	Was the response fullfilled
++ */
++struct iei_wt61p803_puzzle_reply {
++	size_t size;
++	unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE];
++	struct completion received;
++};
++
++/**
++ * struct iei_wt61p803_puzzle_mcu_version - MCU version status
++ * @version:		Primary firmware version
++ * @build_info:		Build date and time
++ * @bootloader_mode:	Status of the MCU operation
++ * @protocol_version:	MCU communication protocol version
++ * @serial_number:	Device factory serial number
++ * @mac_address:	Device factory MAC addresses
++ *
++ * Last element of arrays is reserved for '\0'.
++ */
++struct iei_wt61p803_puzzle_mcu_version {
++	char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1];
++	char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1];
++	bool bootloader_mode;
++	char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1];
++	char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1];
++	char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
++};
++
++/**
++ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver
++ * @serdev:		Pointer to underlying serdev device
++ * @dev:		Pointer to underlying dev device
++ * @reply_lock:		Reply mutex lock
++ * @reply:		Pointer to the iei_wt61p803_puzzle_reply struct
++ * @version:		MCU version related data
++ * @status:		MCU status related data
++ * @response_buffer	Command response buffer allocation
++ * @lock		General member mutex lock
++ */
++struct iei_wt61p803_puzzle {
++	struct serdev_device *serdev;
++	struct device *dev;
++	struct mutex reply_lock; /* lock to prevent multiple firmware calls */
++	struct iei_wt61p803_puzzle_reply *reply;
++	struct iei_wt61p803_puzzle_mcu_version version;
++	struct iei_wt61p803_puzzle_mcu_status status;
++	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
++	struct mutex lock; /* lock to protect response buffer */
++};
++
++static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len)
++{
++	unsigned char checksum = 0;
++	size_t i;
++
++	for (i = 0; i < len; i++)
++		checksum ^= buf[i];
++	return checksum;
++}
++
++static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu,
++					    const unsigned char *raw_resp_data, size_t size)
++{
++	unsigned char checksum;
++
++	/* Check the incoming frame header */
++	if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START ||
++	      raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER ||
++	     (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM &&
++	      raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) {
++		if (mcu->reply->size + size >= sizeof(mcu->reply->data))
++			return -EIO;
++
++		/* Append the frame to existing data */
++		memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size);
++		mcu->reply->size += size;
++	} else {
++		if (size >= sizeof(mcu->reply->data))
++			return -EIO;
++
++		/* Start processing a new frame */
++		memcpy(mcu->reply->data, raw_resp_data, size);
++		mcu->reply->size = size;
++	}
++
++	checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1);
++	if (checksum != mcu->reply->data[mcu->reply->size - 1]) {
++		/* The checksum isn't matched yet, wait for new frames */
++		return size;
++	}
++
++	/* Received all the data */
++	complete(&mcu->reply->received);
++
++	return size;
++}
++
++static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev,
++					const unsigned char *data, size_t size)
++{
++	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
++	int ret;
++
++	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
++	/* Return the number of processed bytes if function returns error,
++	 * discard the remaining incoming data, since the frame this data
++	 * belongs to is broken anyway
++	 */
++	if (ret < 0)
++		return size;
++
++	return ret;
++}
++
++static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = {
++	.receive_buf  = iei_wt61p803_puzzle_recv_buf,
++	.write_wakeup = serdev_device_write_wakeup,
++};
++
++/**
++ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd
++ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
++ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
++ * @size: Size of the cmd char array
++ * @reply_data: Pointer to the reply/response data array (should be allocated)
++ * @reply_size: Pointer to size_t (size of reply_data)
++ * @retry_count: Number of times to retry sending the command to the MCU
++ */
++int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
++					       unsigned char *cmd, size_t size,
++					       unsigned char *reply_data,
++					       size_t *reply_size, int retry_count)
++{
++	struct device *dev = &mcu->serdev->dev;
++	int ret, i;
++
++	for (i = 0; i < retry_count; i++) {
++		ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size,
++							reply_data, reply_size);
++		if (ret != -ETIMEDOUT)
++			return ret;
++	}
++
++	dev_err(dev, "Command response timed out. Retries: %d\n", retry_count);
++
++	return -ETIMEDOUT;
++}
++EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog);
++
++/**
++ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU
++ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
++ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
++ * @size: Size of the cmd char array
++ * @reply_data: Pointer to the reply/response data array (should be allocated)
++ *
++ * Sends a structured command to the MCU.
++ */
++int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
++				      unsigned char *cmd, size_t size,
++				      unsigned char *reply_data,
++				      size_t *reply_size)
++{
++	struct device *dev = &mcu->serdev->dev;
++	int ret;
++
++	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
++		return -EINVAL;
++
++	mutex_lock(&mcu->reply_lock);
++
++	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
++
++	/* Initialize reply struct */
++	reinit_completion(&mcu->reply->received);
++	mcu->reply->size = 0;
++	usleep_range(2000, 10000);
++	serdev_device_write_flush(mcu->serdev);
++	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
++	if (ret < 0)
++		goto exit;
++
++	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
++	ret = wait_for_completion_timeout(&mcu->reply->received,
++					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
++	if (ret == 0) {
++		dev_err(dev, "Command reply receive timeout\n");
++		ret = -ETIMEDOUT;
++		goto exit;
++	}
++
++	*reply_size = mcu->reply->size;
++	/* Copy the received data, as it will not be available after a new frame is received */
++	memcpy(reply_data, mcu->reply->data, mcu->reply->size);
++	ret = 0;
++exit:
++	mutex_unlock(&mcu->reply_lock);
++	return ret;
++}
++EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command);
++
++static int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
++{
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char buzzer_cmd[4] = {};
++	size_t reply_size;
++	int ret;
++
++	buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
++	buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
++
++	mutex_lock(&mcu->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto exit;
++
++	if (reply_size != 3) {
++		ret = -EIO;
++		goto exit;
++	}
++
++	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
++		ret = -EPROTO;
++		goto exit;
++	}
++exit:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu)
++{
++	unsigned char version_cmd[3] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
++		IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION,
++	};
++	unsigned char build_info_cmd[3] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
++		IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD,
++	};
++	unsigned char bootloader_mode_cmd[3] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
++		IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE,
++	};
++	unsigned char protocol_version_cmd[3] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
++		IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION,
++	};
++	unsigned char *rb = mcu->response_buffer;
++	size_t reply_size;
++	int ret;
++
++	mutex_lock(&mcu->lock);
++
++	ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd),
++						rb, &reply_size);
++	if (ret)
++		goto err;
++	if (reply_size < 7) {
++		ret = -EIO;
++		goto err;
++	}
++	sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]);
++
++	ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd,
++						sizeof(build_info_cmd),	rb,
++						&reply_size);
++	if (ret)
++		goto err;
++	if (reply_size < 15) {
++		ret = -EIO;
++		goto err;
++	}
++	sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c",
++		rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11],
++		rb[12], rb[13]);
++
++	ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd,
++						sizeof(bootloader_mode_cmd), rb,
++						&reply_size);
++	if (ret)
++		goto err;
++	if (reply_size < 4) {
++		ret = -EIO;
++		goto err;
++	}
++	if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS)
++		mcu->version.bootloader_mode = false;
++	else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER)
++		mcu->version.bootloader_mode = true;
++
++	ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd,
++						sizeof(protocol_version_cmd), rb,
++						&reply_size);
++	if (ret)
++		goto err;
++	if (reply_size < 9) {
++		ret = -EIO;
++		goto err;
++	}
++	sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c",
++		rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]);
++err:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu)
++{
++	unsigned char mcu_status_cmd[5] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
++		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER,
++		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
++		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
++	};
++	unsigned char *resp_buf = mcu->response_buffer;
++	size_t reply_size;
++	int ret;
++
++	mutex_lock(&mcu->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto exit;
++	if (reply_size < 20) {
++		ret = -EIO;
++		goto exit;
++	}
++
++	/* Response format:
++	 * (IDX	RESPONSE)
++	 * 0	@
++	 * 1	O
++	 * 2	S
++	 * 3	S
++	 * ...
++	 * 5	AC Recovery Status Flag
++	 * ...
++	 * 10	Power Loss Recovery
++	 * ...
++	 * 19	Power Status (system power on method)
++	 * 20	XOR checksum
++	 */
++	if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++	    resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER &&
++	    resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS &&
++	    resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) {
++		mcu->status.ac_recovery_status_flag = resp_buf[5];
++		mcu->status.power_loss_recovery = resp_buf[10];
++		mcu->status.power_status = resp_buf[19];
++	}
++exit:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu)
++{
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char serial_number_cmd[5] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
++		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
++		0x00,	/* EEPROM read address */
++		0x24,	/* Data length */
++	};
++	size_t reply_size;
++	int ret;
++
++	mutex_lock(&mcu->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
++						sizeof(serial_number_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto err;
++
++	if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) {
++		ret = -EIO;
++		goto err;
++	}
++
++	sprintf(mcu->version.serial_number, "%.*s",
++		IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4);
++err:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu,
++						   unsigned char serial_number[36])
++{
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char serial_number_header[4] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
++		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
++		0x00,	/* EEPROM write address */
++		0xC,	/* Data length */
++	};
++	unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */
++	int ret, sn_counter;
++	size_t reply_size;
++
++	/* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */
++	mutex_lock(&mcu->lock);
++	for (sn_counter = 0; sn_counter < 3; sn_counter++) {
++		serial_number_header[2] = 0x0 + 0xC * sn_counter;
++
++		memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header));
++		memcpy(serial_number_cmd + sizeof(serial_number_header),
++		       serial_number + 0xC * sn_counter, 0xC);
++
++		ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
++							sizeof(serial_number_cmd),
++							resp_buf, &reply_size);
++		if (ret)
++			goto err;
++		if (reply_size != 3) {
++			ret = -EIO;
++			goto err;
++		}
++		if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++		      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++		      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
++			ret = -EPROTO;
++			goto err;
++		}
++	}
++
++	sprintf(mcu->version.serial_number, "%.*s",
++		IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number);
++err:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index)
++{
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char mac_address_cmd[5] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
++		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
++		0x00,	/* EEPROM read address */
++		0x11,	/* Data length */
++	};
++	size_t reply_size;
++	int ret;
++
++	mutex_lock(&mcu->lock);
++	mac_address_cmd[2] = 0x24 + 0x11 * index;
++
++	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
++						sizeof(mac_address_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto err;
++
++	if (reply_size < 22) {
++		ret = -EIO;
++		goto err;
++	}
++
++	sprintf(mcu->version.mac_address[index], "%.*s",
++		IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4);
++err:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int
++iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu,
++				      unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH],
++				      int mac_address_idx)
++{
++	unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char mac_address_header[4] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
++		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
++		0x00,	/* EEPROM write address */
++		0x11,	/* Data length */
++	};
++	size_t reply_size;
++	int ret;
++
++	if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC)
++		return -EINVAL;
++
++	mac_address_header[2] = 0x24 + 0x11 * mac_address_idx;
++
++	/* Concat mac_address_header, mac_address to mac_address_cmd */
++	memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header));
++	memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address,
++	       IEI_WT61P803_PUZZLE_MAC_LENGTH);
++
++	mutex_lock(&mcu->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
++						sizeof(mac_address_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto err;
++	if (reply_size != 3) {
++		ret = -EIO;
++		goto err;
++	}
++	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
++		ret = -EPROTO;
++		goto err;
++	}
++
++	sprintf(mcu->version.mac_address[mac_address_idx], "%.*s",
++		IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address);
++err:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu,
++							 int power_loss_recovery_action)
++{
++	unsigned char *resp_buf = mcu->response_buffer;
++	unsigned char power_loss_recovery_cmd[5] = {};
++	size_t reply_size;
++	int ret;
++
++	if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4)
++		return -EINVAL;
++
++	power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER;
++	power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS;
++	power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action];
++
++	mutex_lock(&mcu->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd,
++						sizeof(power_loss_recovery_cmd),
++						resp_buf, &reply_size);
++	if (ret)
++		goto exit;
++	mcu->status.power_loss_recovery = power_loss_recovery_action;
++exit:
++	mutex_unlock(&mcu->lock);
++	return ret;
++}
++
++#define to_puzzle_dev_attr(_attr) \
++	container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr)
++
++static ssize_t show_output(struct device *dev,
++			   struct device_attribute *attr, char *buf)
++{
++	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
++	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
++	int ret;
++
++	switch (pattr->type) {
++	case IEI_WT61P803_PUZZLE_VERSION:
++		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version);
++	case IEI_WT61P803_PUZZLE_BUILD_INFO:
++		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info);
++	case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE:
++		return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode);
++	case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION:
++		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version);
++	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
++		ret = iei_wt61p803_puzzle_get_serial_number(mcu);
++		if (!ret)
++			ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number);
++		else
++			ret = 0;
++		return ret;
++	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
++		ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index);
++		if (!ret)
++			ret = scnprintf(buf, PAGE_SIZE, "%s\n",
++					mcu->version.mac_address[pattr->index]);
++		else
++			ret = 0;
++		return ret;
++	case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
++	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
++	case IEI_WT61P803_PUZZLE_POWER_STATUS:
++		ret = iei_wt61p803_puzzle_get_mcu_status(mcu);
++		if (ret)
++			return ret;
++
++		mutex_lock(&mcu->lock);
++		switch (pattr->type) {
++		case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
++			ret = scnprintf(buf, PAGE_SIZE, "%x\n",
++					mcu->status.ac_recovery_status_flag);
++			break;
++		case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
++			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery);
++			break;
++		case IEI_WT61P803_PUZZLE_POWER_STATUS:
++			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status);
++			break;
++		default:
++			ret = 0;
++			break;
++		}
++		mutex_unlock(&mcu->lock);
++		return ret;
++	default:
++		return 0;
++	}
++
++	return 0;
++}
++
++static ssize_t store_output(struct device *dev,
++			    struct device_attribute *attr,
++			    const char *buf, size_t len)
++{
++	unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH];
++	unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH];
++	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
++	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
++	int power_loss_recovery_action = 0;
++	int ret;
++
++	switch (pattr->type) {
++	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
++		if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1))
++			return -EINVAL;
++		memcpy(serial_number, buf, sizeof(serial_number));
++		ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number);
++		if (ret)
++			return ret;
++		return len;
++	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
++		if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1))
++			return -EINVAL;
++
++		memcpy(mac_address, buf, sizeof(mac_address));
++
++		if (strlen(attr->attr.name) != 13)
++			return -EIO;
++
++		ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index);
++		if (ret)
++			return ret;
++		return len;
++	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
++		ret = kstrtoint(buf, 10, &power_loss_recovery_action);
++		if (ret)
++			return ret;
++		ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu,
++								    power_loss_recovery_action);
++		if (ret)
++			return ret;
++		return len;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \
++	struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \
++		{ .dev_attr	= __ATTR(_name, _mode, _show, _store), \
++		  .type		= _type, \
++		  .index	= _index }
++
++#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \
++	IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id)
++
++#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \
++	IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id)
++
++static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6);
++static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7);
++static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0);
++static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0);
++
++static struct attribute *iei_wt61p803_puzzle_attrs[] = {
++	&dev_attr_version.dev_attr.attr,
++	&dev_attr_build_info.dev_attr.attr,
++	&dev_attr_bootloader_mode.dev_attr.attr,
++	&dev_attr_protocol_version.dev_attr.attr,
++	&dev_attr_serial_number.dev_attr.attr,
++	&dev_attr_mac_address_0.dev_attr.attr,
++	&dev_attr_mac_address_1.dev_attr.attr,
++	&dev_attr_mac_address_2.dev_attr.attr,
++	&dev_attr_mac_address_3.dev_attr.attr,
++	&dev_attr_mac_address_4.dev_attr.attr,
++	&dev_attr_mac_address_5.dev_attr.attr,
++	&dev_attr_mac_address_6.dev_attr.attr,
++	&dev_attr_mac_address_7.dev_attr.attr,
++	&dev_attr_ac_recovery_status.dev_attr.attr,
++	&dev_attr_power_loss_recovery.dev_attr.attr,
++	&dev_attr_power_status.dev_attr.attr,
++	NULL
++};
++ATTRIBUTE_GROUPS(iei_wt61p803_puzzle);
++
++static int iei_wt61p803_puzzle_sysfs_create(struct device *dev,
++					    struct iei_wt61p803_puzzle *mcu)
++{
++	int ret;
++
++	ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
++	if (ret)
++		mfd_remove_devices(mcu->dev);
++
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev,
++					    struct iei_wt61p803_puzzle *mcu)
++{
++	/* Remove sysfs groups */
++	sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
++	mfd_remove_devices(mcu->dev);
++
++	return 0;
++}
++
++static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev)
++{
++	struct device *dev = &serdev->dev;
++	struct iei_wt61p803_puzzle *mcu;
++	u32 baud;
++	int ret;
++
++	/* Read the baud rate from 'current-speed', because the MCU supports different rates */
++	if (device_property_read_u32(dev, "current-speed", &baud)) {
++		dev_err(dev,
++			"'current-speed' is not specified in device node\n");
++		return -EINVAL;
++	}
++	dev_dbg(dev, "Driver baud rate: %d\n", baud);
++
++	/* Allocate the memory */
++	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
++	if (!mcu)
++		return -ENOMEM;
++
++	mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL);
++	if (!mcu->reply)
++		return -ENOMEM;
++
++	/* Initialize device struct data */
++	mcu->serdev = serdev;
++	mcu->dev = dev;
++	init_completion(&mcu->reply->received);
++	mutex_init(&mcu->reply_lock);
++	mutex_init(&mcu->lock);
++
++	/* Setup UART interface */
++	serdev_device_set_drvdata(serdev, mcu);
++	serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops);
++	ret = devm_serdev_device_open(dev, serdev);
++	if (ret)
++		return ret;
++	serdev_device_set_baudrate(serdev, baud);
++	serdev_device_set_flow_control(serdev, false);
++	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
++	if (ret) {
++		dev_err(dev, "Failed to set parity\n");
++		return ret;
++	}
++
++	ret = iei_wt61p803_puzzle_get_version(mcu);
++	if (ret)
++		return ret;
++
++	dev_dbg(dev, "MCU version: %s\n", mcu->version.version);
++	dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info);
++	dev_dbg(dev, "MCU in bootloader mode: %s\n",
++		mcu->version.bootloader_mode ? "true" : "false");
++	dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version);
++
++	if (device_property_read_bool(dev, "enable-beep")) {
++		ret = iei_wt61p803_puzzle_buzzer(mcu, false);
++		if (ret)
++			return ret;
++	}
++
++	ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu);
++	if (ret)
++		return ret;
++
++	return devm_of_platform_populate(dev);
++}
++
++static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev)
++{
++	struct device *dev = &serdev->dev;
++	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
++
++	iei_wt61p803_puzzle_sysfs_remove(dev, mcu);
++}
++
++static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = {
++	{ .compatible = "iei,wt61p803-puzzle" },
++	{ }
++};
++
++MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids);
++
++static struct serdev_device_driver iei_wt61p803_puzzle_drv = {
++	.probe			= iei_wt61p803_puzzle_probe,
++	.remove			= iei_wt61p803_puzzle_remove,
++	.driver = {
++		.name		= "iei-wt61p803-puzzle",
++		.of_match_table	= iei_wt61p803_puzzle_dt_ids,
++	},
++};
++
++module_serdev_device_driver(iei_wt61p803_puzzle_drv);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Luka Kovacic <[email protected]>");
++MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver");
+--- /dev/null
++++ b/include/linux/mfd/iei-wt61p803-puzzle.h
+@@ -0,0 +1,66 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++/* IEI WT61P803 PUZZLE MCU Driver
++ * System management microcontroller for fan control, temperature sensor reading,
++ * LED control and system identification on IEI Puzzle series ARM-based appliances.
++ *
++ * Copyright (C) 2020 Sartura Ltd.
++ * Author: Luka Kovacic <[email protected]>
++ */
++
++#ifndef _MFD_IEI_WT61P803_PUZZLE_H_
++#define _MFD_IEI_WT61P803_PUZZLE_H_
++
++#define IEI_WT61P803_PUZZLE_BUF_SIZE 512
++
++/* Command magic numbers */
++#define IEI_WT61P803_PUZZLE_CMD_HEADER_START		0x40 /* @ */
++#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER	0x25 /* % */
++#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM		0xF7
++
++#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK		0x30 /* 0 */
++#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK	0x70
++
++#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ		0xA1
++#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE		0xA0
++
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION		0x56 /* V */
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD		0x42 /* B */
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE	0x4D /* M */
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER	0x30
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS		0x31
++#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION	0x50 /* P */
++
++#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE		0x43 /* C */
++#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER		0x4F /* O */
++#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS	0x53 /* S */
++#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
++
++#define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
++#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
++
++#define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
++#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
++
++#define IEI_WT61P803_PUZZLE_CMD_FAN			0x46 /* F */
++#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ		0x5A /* Z */
++#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE		0x57 /* W */
++#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE		0x30
++#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE		0x41 /* A */
++
++#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */
++#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */
++
++struct iei_wt61p803_puzzle_mcu_version;
++struct iei_wt61p803_puzzle_reply;
++struct iei_wt61p803_puzzle;
++
++int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
++					       unsigned char *cmd, size_t size,
++					       unsigned char *reply_data, size_t *reply_size,
++					       int retry_count);
++
++int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
++				      unsigned char *cmd, size_t size,
++				      unsigned char *reply_data, size_t *reply_size);
++
++#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */

target/linux/mvebu/patches-6.6/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch

@@ -0,0 +1,501 @@
+From e3310a638cd310bfd93dbbc6d2732ab6aea18dd2 Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:34 +0000
+Subject: [PATCH 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
+
+Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
+control via PWM, reading fan speed and reading on-board temperature
+sensors.
+
+The driver registers a HWMON device and a simple thermal cooling device to
+enable in-kernel fan management.
+
+This driver depends on the IEI WT61P803 PUZZLE MFD driver.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Acked-by: Guenter Roeck <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ drivers/hwmon/Kconfig                     |   8 +
+ drivers/hwmon/Makefile                    |   1 +
+ drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++
+ 3 files changed, 454 insertions(+)
+ create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
+
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV
+ 	  This driver can also be built as a module. If so, the module
+ 	  will be called ibmpowernv.
+ 
++config SENSORS_IEI_WT61P803_PUZZLE_HWMON
++	tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
++	depends on MFD_IEI_WT61P803_PUZZLE
++	help
++	  The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
++	  and writing fan PWM values. It also supports reading on-board
++	  temperature sensors.
++
+ config SENSORS_IIO_HWMON
+ 	tristate "Hwmon driver that uses channels specified via iio maps"
+ 	depends on IIO
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130
+ obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
+ obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
+ obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
++obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
+ obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
+ obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
+ obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
+--- /dev/null
++++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
+@@ -0,0 +1,445 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/* IEI WT61P803 PUZZLE MCU HWMON Driver
++ *
++ * Copyright (C) 2020 Sartura Ltd.
++ * Author: Luka Kovacic <[email protected]>
++ */
++
++#include <linux/err.h>
++#include <linux/hwmon.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/math64.h>
++#include <linux/mfd/iei-wt61p803-puzzle.h>
++#include <linux/mod_devicetable.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/property.h>
++#include <linux/slab.h>
++#include <linux/thermal.h>
++
++#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM	2
++#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL	255
++
++/**
++ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
++ * @mcu_hwmon:		Parent driver struct pointer
++ * @tcdev:		Thermal cooling device pointer
++ * @name:		Thermal cooling device name
++ * @pwm_channel:	Controlled PWM channel (0 or 1)
++ * @cooling_levels:	Thermal cooling device cooling levels (DT)
++ * @cur_level:		Current cooling level
++ * @num_levels:	Number of cooling levels
++ */
++struct iei_wt61p803_puzzle_thermal_cooling_device {
++	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
++	struct thermal_cooling_device *tcdev;
++	char name[THERMAL_NAME_LENGTH];
++	int pwm_channel;
++	u32 *cooling_levels;
++	int cur_level;
++	u8 num_levels;
++};
++
++/**
++ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
++ * @mcu:				MCU struct pointer
++ * @response_buffer			Global MCU response buffer
++ * @thermal_cooling_dev_present:	Per-channel thermal cooling device control indicator
++ * @cdev:				Per-channel thermal cooling device private structure
++ */
++struct iei_wt61p803_puzzle_hwmon {
++	struct iei_wt61p803_puzzle *mcu;
++	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
++	bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
++	struct iei_wt61p803_puzzle_thermal_cooling_device
++		*cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
++	struct mutex lock; /* mutex to protect response_buffer array */
++};
++
++#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
++static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
++						int channel, long *value)
++{
++	unsigned char *resp_buf = mcu_hwmon->response_buffer;
++	unsigned char temp_sensor_ntc_cmd[4] = {
++		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
++		IEI_WT61P803_PUZZLE_CMD_TEMP,
++		IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
++	};
++	size_t reply_size;
++	int ret;
++
++	mutex_lock(&mcu_hwmon->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
++						sizeof(temp_sensor_ntc_cmd), resp_buf,
++						&reply_size);
++	if (ret)
++		goto exit;
++
++	if (reply_size != 7) {
++		ret = -EIO;
++		goto exit;
++	}
++
++	/* Check the number of NTC values */
++	if (resp_buf[3] != '2') {
++		ret = -EIO;
++		goto exit;
++	}
++
++	*value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
++exit:
++	mutex_unlock(&mcu_hwmon->lock);
++	return ret;
++}
++
++#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
++static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
++					      int channel, long *value)
++{
++	unsigned char *resp_buf = mcu_hwmon->response_buffer;
++	unsigned char fan_speed_cmd[4] = {};
++	size_t reply_size;
++	int ret;
++
++	fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
++	fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
++
++	mutex_lock(&mcu_hwmon->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
++						sizeof(fan_speed_cmd), resp_buf,
++						&reply_size);
++	if (ret)
++		goto exit;
++
++	if (reply_size != 7) {
++		ret = -EIO;
++		goto exit;
++	}
++
++	*value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
++exit:
++	mutex_unlock(&mcu_hwmon->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
++						 int channel, long pwm_set_val)
++{
++	unsigned char *resp_buf = mcu_hwmon->response_buffer;
++	unsigned char pwm_set_cmd[6] = {};
++	size_t reply_size;
++	int ret;
++
++	pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
++	pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
++	pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
++	pwm_set_cmd[4] = pwm_set_val;
++
++	mutex_lock(&mcu_hwmon->lock);
++	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
++						sizeof(pwm_set_cmd), resp_buf,
++						&reply_size);
++	if (ret)
++		goto exit;
++
++	if (reply_size != 3) {
++		ret = -EIO;
++		goto exit;
++	}
++
++	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
++		ret = -EIO;
++		goto exit;
++	}
++exit:
++	mutex_unlock(&mcu_hwmon->lock);
++	return ret;
++}
++
++static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
++						int channel, long *value)
++{
++	unsigned char *resp_buf = mcu_hwmon->response_buffer;
++	unsigned char pwm_get_cmd[5] = {};
++	size_t reply_size;
++	int ret;
++
++	pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
++	pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
++	pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
++
++	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
++						sizeof(pwm_get_cmd), resp_buf,
++						&reply_size);
++	if (ret)
++		return ret;
++
++	if (reply_size != 5)
++		return -EIO;
++
++	if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
++		return -EIO;
++
++	*value = resp_buf[3];
++
++	return 0;
++}
++
++static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
++				    u32 attr, int channel, long *val)
++{
++	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
++
++	switch (type) {
++	case hwmon_pwm:
++		return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
++	case hwmon_fan:
++		return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
++	case hwmon_temp:
++		return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
++	default:
++		return -EINVAL;
++	}
++}
++
++static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
++				     u32 attr, int channel, long val)
++{
++	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
++
++	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
++}
++
++static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
++					      u32 attr, int channel)
++{
++	const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
++
++	switch (type) {
++	case hwmon_pwm:
++		if (mcu_hwmon->thermal_cooling_dev_present[channel])
++			return 0444;
++		if (attr == hwmon_pwm_input)
++			return 0644;
++		break;
++	case hwmon_fan:
++		if (attr == hwmon_fan_input)
++			return 0444;
++		break;
++	case hwmon_temp:
++		if (attr == hwmon_temp_input)
++			return 0444;
++		break;
++	default:
++		return 0;
++	}
++
++	return 0;
++}
++
++static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
++	.is_visible = iei_wt61p803_puzzle_is_visible,
++	.read = iei_wt61p803_puzzle_read,
++	.write = iei_wt61p803_puzzle_write,
++};
++
++static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
++	HWMON_CHANNEL_INFO(pwm,
++			   HWMON_PWM_INPUT,
++			   HWMON_PWM_INPUT),
++	HWMON_CHANNEL_INFO(fan,
++			   HWMON_F_INPUT,
++			   HWMON_F_INPUT,
++			   HWMON_F_INPUT,
++			   HWMON_F_INPUT,
++			   HWMON_F_INPUT),
++	HWMON_CHANNEL_INFO(temp,
++			   HWMON_T_INPUT,
++			   HWMON_T_INPUT),
++	NULL
++};
++
++static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
++	.ops = &iei_wt61p803_puzzle_hwmon_ops,
++	.info = iei_wt61p803_puzzle_info,
++};
++
++static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
++					     unsigned long *state)
++{
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
++
++	if (!cdev)
++		return -EINVAL;
++
++	*state = cdev->num_levels - 1;
++	return 0;
++}
++
++static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
++					     unsigned long *state)
++{
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
++
++	if (!cdev)
++		return -EINVAL;
++
++	if (cdev->cur_level < 0)
++		return -EAGAIN;
++
++	*state = cdev->cur_level;
++	return 0;
++}
++
++static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
++					     unsigned long state)
++{
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
++	u8 pwm_level;
++
++	if (!cdev)
++		return -EINVAL;
++
++	if (state >= cdev->num_levels)
++		return -EINVAL;
++
++	if (state == cdev->cur_level)
++		return 0;
++
++	cdev->cur_level = state;
++	pwm_level = cdev->cooling_levels[state];
++
++	return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
++}
++
++static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
++	.get_max_state = iei_wt61p803_puzzle_get_max_state,
++	.get_cur_state = iei_wt61p803_puzzle_get_cur_state,
++	.set_cur_state = iei_wt61p803_puzzle_set_cur_state,
++};
++
++static int
++iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
++					       struct fwnode_handle *child,
++					       struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
++{
++	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
++	u32 pwm_channel;
++	u8 num_levels;
++	int i, ret;
++
++	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
++	if (ret)
++		return ret;
++
++	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
++
++	num_levels = fwnode_property_count_u32(child, "cooling-levels");
++	if (!num_levels)
++		return -EINVAL;
++
++	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
++	if (!cdev)
++		return -ENOMEM;
++
++	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
++	if (!cdev->cooling_levels)
++		return -ENOMEM;
++
++	ret = fwnode_property_read_u32_array(child, "cooling-levels",
++					     cdev->cooling_levels,
++					     num_levels);
++	if (ret) {
++		dev_err(dev, "Couldn't read property 'cooling-levels'\n");
++		return ret;
++	}
++
++	for (i = 0; i < num_levels; i++) {
++		if (cdev->cooling_levels[i] >
++		    IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
++			dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
++				cdev->cooling_levels[i],
++				IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
++			return -EINVAL;
++		}
++	}
++
++	cdev->mcu_hwmon = mcu_hwmon;
++	cdev->pwm_channel = pwm_channel;
++	cdev->num_levels = num_levels;
++	cdev->cur_level = -1;
++	mcu_hwmon->cdev[pwm_channel] = cdev;
++
++	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
++	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
++							      cdev, &iei_wt61p803_puzzle_cooling_ops);
++	if (IS_ERR(cdev->tcdev))
++		return PTR_ERR(cdev->tcdev);
++
++	return 0;
++}
++
++static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
++	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
++	struct fwnode_handle *child;
++	struct device *hwmon_dev;
++	int ret;
++
++	mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
++	if (!mcu_hwmon)
++		return -ENOMEM;
++
++	mcu_hwmon->mcu = mcu;
++	platform_set_drvdata(pdev, mcu_hwmon);
++	mutex_init(&mcu_hwmon->lock);
++
++	hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
++							 mcu_hwmon,
++							 &iei_wt61p803_puzzle_chip_info,
++							 NULL);
++	if (IS_ERR(hwmon_dev))
++		return PTR_ERR(hwmon_dev);
++
++	/* Control fans via PWM lines via Linux Kernel */
++	if (IS_ENABLED(CONFIG_THERMAL)) {
++		device_for_each_child_node(dev, child) {
++			ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
++			if (ret) {
++				dev_err(dev, "Enabling the PWM fan failed\n");
++				fwnode_handle_put(child);
++				return ret;
++			}
++		}
++	}
++	return 0;
++}
++
++static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
++	{ .compatible = "iei,wt61p803-puzzle-hwmon" },
++	{}
++};
++MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
++
++static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
++	.driver = {
++		.name = "iei-wt61p803-puzzle-hwmon",
++		.of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
++	},
++	.probe = iei_wt61p803_puzzle_hwmon_probe,
++};
++
++module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
++
++MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
++MODULE_AUTHOR("Luka Kovacic <[email protected]>");
++MODULE_LICENSE("GPL v2");

target/linux/mvebu/patches-6.6/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch

@@ -0,0 +1,207 @@
+From f3b44eb69cc561cf05d00506dcec0dd9be003ed8 Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:35 +0000
+Subject: [PATCH 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
+
+Add support for the IEI WT61P803 PUZZLE LED driver.
+Currently only the front panel power LED is supported,
+since it is the only LED on this board wired through the
+MCU.
+
+The LED is wired directly to the on-board MCU controller
+and is toggled using an MCU command.
+
+Support for more LEDs is going to be added in case more
+boards implement this microcontroller, as LEDs use many
+different GPIOs.
+
+This driver depends on the IEI WT61P803 PUZZLE MFD driver.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ drivers/leds/Kconfig                    |   8 ++
+ drivers/leds/Makefile                   |   1 +
+ drivers/leds/leds-iei-wt61p803-puzzle.c | 147 ++++++++++++++++++++++++
+ 3 files changed, 156 insertions(+)
+ create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -300,6 +300,14 @@ config LEDS_IPAQ_MICRO
+ 	  Choose this option if you want to use the notification LED on
+ 	  Compaq/HP iPAQ h3100 and h3600.
+ 
++config LEDS_IEI_WT61P803_PUZZLE
++	tristate "LED Support for the IEI WT61P803 PUZZLE MCU"
++	depends on LEDS_CLASS
++	depends on MFD_IEI_WT61P803_PUZZLE
++	help
++	  This option enables support for LEDs controlled by the IEI WT61P803
++	  M801 MCU.
++
+ config LEDS_HP6XX
+ 	tristate "LED Support for the HP Jornada 6xx"
+ 	depends on LEDS_CLASS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_IP30)			+= leds-ip30.o
+ obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
++obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE)	+= leds-iei-wt61p803-puzzle.o
+ obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
+ obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
+ obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
+--- /dev/null
++++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
+@@ -0,0 +1,147 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/* IEI WT61P803 PUZZLE MCU LED Driver
++ *
++ * Copyright (C) 2020 Sartura Ltd.
++ * Author: Luka Kovacic <[email protected]>
++ */
++
++#include <linux/leds.h>
++#include <linux/mfd/iei-wt61p803-puzzle.h>
++#include <linux/mod_devicetable.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/property.h>
++#include <linux/slab.h>
++
++enum iei_wt61p803_puzzle_led_state {
++	IEI_LED_OFF = 0x30,
++	IEI_LED_ON = 0x31,
++	IEI_LED_BLINK_5HZ = 0x32,
++	IEI_LED_BLINK_1HZ = 0x33,
++};
++
++/**
++ * struct iei_wt61p803_puzzle_led - MCU LED Driver
++ * @cdev:		LED classdev
++ * @mcu:		MCU struct pointer
++ * @response_buffer	Global MCU response buffer
++ * @lock:		General mutex lock to protect simultaneous R/W access to led_power_state
++ * @led_power_state:	State of the front panel power LED
++ */
++struct iei_wt61p803_puzzle_led {
++	struct led_classdev cdev;
++	struct iei_wt61p803_puzzle *mcu;
++	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
++	struct mutex lock; /* mutex to protect led_power_state */
++	int led_power_state;
++};
++
++static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
++	(struct led_classdev *led_cdev)
++{
++	return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev);
++}
++
++static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
++							   enum led_brightness brightness)
++{
++	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
++	unsigned char *resp_buf = priv->response_buffer;
++	unsigned char led_power_cmd[5] = {};
++	size_t reply_size;
++	int ret;
++
++	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
++	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
++	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
++
++	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
++						sizeof(led_power_cmd),
++						resp_buf,
++						&reply_size);
++	if (ret)
++		return ret;
++
++	if (reply_size != 3)
++		return -EIO;
++
++	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
++		return -EIO;
++
++	mutex_lock(&priv->lock);
++	priv->led_power_state = brightness;
++	mutex_unlock(&priv->lock);
++
++	return 0;
++}
++
++static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev)
++{
++	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
++	int led_state;
++
++	mutex_lock(&priv->lock);
++	led_state = priv->led_power_state;
++	mutex_unlock(&priv->lock);
++
++	return led_state;
++}
++
++static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
++	struct iei_wt61p803_puzzle_led *priv;
++	struct led_init_data init_data = {};
++	struct fwnode_handle *child;
++	int ret;
++
++	if (device_get_child_node_count(dev) != 1)
++		return -EINVAL;
++
++	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
++	if (!priv)
++		return -ENOMEM;
++
++	priv->mcu = mcu;
++	priv->led_power_state = 1;
++	mutex_init(&priv->lock);
++	dev_set_drvdata(dev, priv);
++
++	child = device_get_next_child_node(dev, NULL);
++	init_data.fwnode = child;
++
++	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
++	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
++	priv->cdev.max_brightness = 1;
++
++	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
++	if (ret)
++		dev_err(dev, "Could not register LED\n");
++
++	fwnode_handle_put(child);
++	return ret;
++}
++
++static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = {
++	{ .compatible = "iei,wt61p803-puzzle-leds" },
++	{ }
++};
++MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match);
++
++static struct platform_driver iei_wt61p803_puzzle_led_driver = {
++	.driver = {
++		.name = "iei-wt61p803-puzzle-led",
++		.of_match_table = iei_wt61p803_puzzle_led_of_match,
++	},
++	.probe = iei_wt61p803_puzzle_led_probe,
++};
++module_platform_driver(iei_wt61p803_puzzle_led_driver);
++
++MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver");
++MODULE_AUTHOR("Luka Kovacic <[email protected]>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle");

target/linux/mvebu/patches-6.6/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch

@@ -0,0 +1,82 @@
+From 2fab3b4956c5b2f83c1e1abffc1df39de2933d83 Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:36 +0000
+Subject: [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs
+ interface documentation
+
+Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
+monitoring and control of the microcontroller from user space.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ .../testing/sysfs-driver-iei-wt61p803-puzzle  | 61 +++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+ create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
+
+--- /dev/null
++++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
+@@ -0,0 +1,61 @@
++What:		/sys/bus/serial/devices/.../mac_address_*
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RW) Internal factory assigned MAC address values
++
++What:		/sys/bus/serial/devices/.../serial_number
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RW) Internal factory assigned serial number
++
++What:		/sys/bus/serial/devices/.../version
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Internal MCU firmware version
++
++What:		/sys/bus/serial/devices/.../protocol_version
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Internal MCU communication protocol version
++
++What:		/sys/bus/serial/devices/.../power_loss_recovery
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RW) Host platform power loss recovery settings
++		Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
++
++What:		/sys/bus/serial/devices/.../bootloader_mode
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Internal MCU bootloader mode status
++		Value mapping:
++		0 - normal mode
++		1 - bootloader mode
++
++What:		/sys/bus/serial/devices/.../power_status
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Power status indicates the host platform power on method.
++		Value mapping (bitwise list):
++		0x80 - Null
++		0x40 - Firmware flag
++		0x20 - Power loss detection flag (powered off)
++		0x10 - Power loss detection flag (AC mode)
++		0x08 - Button power on
++		0x04 - Wake-on-LAN power on
++		0x02 - RTC alarm power on
++		0x01 - AC recover power on
++
++What:		/sys/bus/serial/devices/.../build_info
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Internal MCU firmware build date
++		Format: yyyy/mm/dd hh:mm
++
++What:		/sys/bus/serial/devices/.../ac_recovery_status
++Date:		September 2020
++Contact:	Luka Kovacic <[email protected]>
++Description:	(RO) Host platform AC recovery status value
++		Value mapping:
++		0 - board has not been recovered from power down
++		1 - board has been recovered from power down

target/linux/mvebu/patches-6.6/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch

@@ -0,0 +1,74 @@
+From 0aff3e5923fecc6842473ad07a688d6e2f2c2d55 Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:37 +0000
+Subject: [PATCH 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver
+ documentation
+
+Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 43 +++++++++++++++++++
+ Documentation/hwmon/index.rst                 |  1 +
+ 2 files changed, 44 insertions(+)
+ create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
+
+--- /dev/null
++++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
+@@ -0,0 +1,43 @@
++.. SPDX-License-Identifier: GPL-2.0-only
++
++Kernel driver iei-wt61p803-puzzle-hwmon
++=======================================
++
++Supported chips:
++ * IEI WT61P803 PUZZLE for IEI Puzzle M801
++
++   Prefix: 'iei-wt61p803-puzzle-hwmon'
++
++Author: Luka Kovacic <[email protected]>
++
++
++Description
++-----------
++
++This driver adds fan and temperature sensor reading for some IEI Puzzle
++series boards.
++
++Sysfs attributes
++----------------
++
++The following attributes are supported:
++
++- IEI WT61P803 PUZZLE for IEI Puzzle M801
++
++/sys files in hwmon subsystem
++-----------------------------
++
++================= == =====================================================
++fan[1-5]_input    RO files for fan speed (in RPM)
++pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)
++temp[1-2]_input   RO files for temperature sensors, in millidegree Celsius
++================= == =====================================================
++
++/sys files in thermal subsystem
++-------------------------------
++
++================= == =====================================================
++cur_state         RW file for current cooling state of the cooling device
++                     (0..max_state)
++max_state         RO file for maximum cooling state of the cooling device
++================= == =====================================================
+--- a/Documentation/hwmon/index.rst
++++ b/Documentation/hwmon/index.rst
+@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers
+    ibmaem
+    ibm-cffps
+    ibmpowernv
++   iei-wt61p803-puzzle-hwmon
+    ina209
+    ina2xx
+    ina238

target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch

@@ -0,0 +1,41 @@
+From 12479baad28d2a08c6cb9e83471057635fa1635c Mon Sep 17 00:00:00 2001
+From: Luka Kovacic <luka.kovacic () sartura ! hr>
+Date: Tue, 24 Aug 2021 12:44:38 +0000
+Subject: [PATCH 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE
+ driver
+
+Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers).
+
+Signed-off-by: Luka Kovacic <[email protected]>
+Signed-off-by: Pavo Banicevic <[email protected]>
+Cc: Luka Perkov <[email protected]>
+Cc: Robert Marko <[email protected]>
+---
+ MAINTAINERS | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -9900,6 +9900,22 @@ F:	include/net/nl802154.h
+ F:	net/ieee802154/
+ F:	net/mac802154/
+ 
++IEI WT61P803 M801 MFD DRIVER
++M:	Luka Kovacic <[email protected]>
++M:	Luka Perkov <[email protected]>
++M:	Goran Medic <[email protected]>
++L:	[email protected]
++S:	Maintained
++F:	Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
++F:	Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
++F:	Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
++F:	Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
++F:	Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
++F:	drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
++F:	drivers/leds/leds-iei-wt61p803-puzzle.c
++F:	drivers/mfd/iei-wt61p803-puzzle.c
++F:	include/linux/mfd/iei-wt61p803-puzzle.h
++
+ IFE PROTOCOL
+ M:	Yotam Gigi <[email protected]>
+ M:	Jamal Hadi Salim <[email protected]>

target/linux/mvebu/patches-6.6/910-drivers-leds-wt61p803-puzzle-improvements.patch

@@ -0,0 +1,271 @@
+--- a/drivers/leds/leds-iei-wt61p803-puzzle.c
++++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
+@@ -9,9 +9,13 @@
+ #include <linux/mfd/iei-wt61p803-puzzle.h>
+ #include <linux/mod_devicetable.h>
+ #include <linux/module.h>
++#include <linux/of.h>
+ #include <linux/platform_device.h>
+ #include <linux/property.h>
+ #include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#define IEI_LEDS_MAX		4
+ 
+ enum iei_wt61p803_puzzle_led_state {
+ 	IEI_LED_OFF = 0x30,
+@@ -33,7 +37,11 @@ struct iei_wt61p803_puzzle_led {
+ 	struct iei_wt61p803_puzzle *mcu;
+ 	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
+ 	struct mutex lock; /* mutex to protect led_power_state */
++	struct work_struct work;
+ 	int led_power_state;
++	int id;
++	u8 blinking;
++	bool active_low;
+ };
+ 
+ static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
+@@ -51,10 +59,18 @@ static int iei_wt61p803_puzzle_led_brigh
+ 	size_t reply_size;
+ 	int ret;
+ 
++	if (priv->blinking) {
++		if (brightness == LED_OFF)
++			priv->blinking = 0;
++		else
++			return 0;
++	}
++
+ 	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+ 	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
+-	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
+-	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
++	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
++	led_power_cmd[3] = ((brightness == LED_OFF) ^ priv->active_low) ?
++				IEI_LED_OFF : priv->blinking?priv->blinking:IEI_LED_ON;
+ 
+ 	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
+ 						sizeof(led_power_cmd),
+@@ -90,39 +106,166 @@ static enum led_brightness iei_wt61p803_
+ 	return led_state;
+ }
+ 
++static void iei_wt61p803_puzzle_led_apply_blink(struct work_struct *work)
++{
++	struct iei_wt61p803_puzzle_led *priv = container_of(work, struct iei_wt61p803_puzzle_led, work);
++	unsigned char led_blink_cmd[5] = {};
++	unsigned char resp_buf[IEI_WT61P803_PUZZLE_BUF_SIZE];
++	size_t reply_size;
++
++	led_blink_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
++	led_blink_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
++	led_blink_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
++	led_blink_cmd[3] = priv->blinking;
++
++	iei_wt61p803_puzzle_write_command(priv->mcu, led_blink_cmd,
++					  sizeof(led_blink_cmd),
++					  resp_buf,
++					  &reply_size);
++
++	return;
++}
++
++static int iei_wt61p803_puzzle_led_set_blink(struct led_classdev *cdev,
++					     unsigned long *delay_on,
++					     unsigned long *delay_off)
++{
++	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
++	u8 blink_mode = 0;
++	int ret = 0;
++
++	/* set defaults */
++	if (!*delay_on && !*delay_off) {
++		*delay_on = 500;
++		*delay_off = 500;
++	}
++
++	/* minimum delay for soft-driven blinking is 100ms to keep load low */
++	if (*delay_on < 100)
++		*delay_on = 100;
++
++	if (*delay_off < 100)
++		*delay_off = 100;
++
++	/* offload blinking to hardware, if possible */
++	if (*delay_on != *delay_off) {
++		ret = -EINVAL;
++	} else if (*delay_on == 100) {
++		blink_mode = IEI_LED_BLINK_5HZ;
++		*delay_on = 100;
++		*delay_off = 100;
++	} else if (*delay_on <= 500) {
++		blink_mode = IEI_LED_BLINK_1HZ;
++		*delay_on = 500;
++		*delay_off = 500;
++	} else {
++		ret = -EINVAL;
++	}
++
++	mutex_lock(&priv->lock);
++	priv->blinking = blink_mode;
++	mutex_unlock(&priv->lock);
++
++	if (blink_mode)
++		schedule_work(&priv->work);
++
++	return ret;
++}
++
++
++static int iei_wt61p803_puzzle_led_set_dt_default(struct led_classdev *cdev,
++				     struct device_node *np)
++{
++	const char *state;
++	int ret = 0;
++
++	state = of_get_property(np, "default-state", NULL);
++	if (state) {
++		if (!strcmp(state, "on")) {
++			ret =
++			iei_wt61p803_puzzle_led_brightness_set_blocking(
++				cdev, cdev->max_brightness);
++		} else  {
++			ret = iei_wt61p803_puzzle_led_brightness_set_blocking(
++				cdev, LED_OFF);
++		}
++	}
++
++	return ret;
++}
++
+ static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
+ {
+ 	struct device *dev = &pdev->dev;
++	struct device_node *np = dev_of_node(dev);
++	struct device_node *child;
+ 	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
+ 	struct iei_wt61p803_puzzle_led *priv;
+-	struct led_init_data init_data = {};
+-	struct fwnode_handle *child;
+ 	int ret;
++	u32 reg;
+ 
+-	if (device_get_child_node_count(dev) != 1)
++	if (device_get_child_node_count(dev) > IEI_LEDS_MAX)
+ 		return -EINVAL;
+ 
+-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+-	if (!priv)
+-		return -ENOMEM;
+-
+-	priv->mcu = mcu;
+-	priv->led_power_state = 1;
+-	mutex_init(&priv->lock);
+-	dev_set_drvdata(dev, priv);
+-
+-	child = device_get_next_child_node(dev, NULL);
+-	init_data.fwnode = child;
+-
+-	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
+-	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
+-	priv->cdev.max_brightness = 1;
++	for_each_available_child_of_node(np, child) {
++		struct led_init_data init_data = {};
+ 
+-	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
+-	if (ret)
+-		dev_err(dev, "Could not register LED\n");
++		ret = of_property_read_u32(child, "reg", &reg);
++		if (ret) {
++			dev_err(dev, "Failed to read led 'reg' property\n");
++			goto put_child_node;
++		}
++
++		if (reg > IEI_LEDS_MAX) {
++			dev_err(dev, "Invalid led reg %u\n", reg);
++			ret = -EINVAL;
++			goto put_child_node;
++		}
++
++		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
++		if (!priv) {
++			ret = -ENOMEM;
++			goto put_child_node;
++		}
++
++		mutex_init(&priv->lock);
++
++		dev_set_drvdata(dev, priv);
++
++		if (of_property_read_bool(child, "active-low"))
++			priv->active_low = true;
++
++		priv->mcu = mcu;
++		priv->id = reg;
++		priv->led_power_state = 1;
++		priv->blinking = 0;
++		init_data.fwnode = of_fwnode_handle(child);
++
++		priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
++		priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
++		priv->cdev.blink_set = iei_wt61p803_puzzle_led_set_blink;
++
++		priv->cdev.max_brightness = 1;
++
++		INIT_WORK(&priv->work, iei_wt61p803_puzzle_led_apply_blink);
++
++		ret = iei_wt61p803_puzzle_led_set_dt_default(&priv->cdev, child);
++		if (ret) {
++			dev_err(dev, "Could apply default from DT\n");
++			goto put_child_node;
++		}
++
++		ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
++		if (ret) {
++			dev_err(dev, "Could not register LED\n");
++			goto put_child_node;
++		}
++	}
++
++	return ret;
+ 
+-	fwnode_handle_put(child);
++put_child_node:
++	of_node_put(child);
+ 	return ret;
+ }
+ 
+--- a/include/linux/mfd/iei-wt61p803-puzzle.h
++++ b/include/linux/mfd/iei-wt61p803-puzzle.h
+@@ -36,7 +36,7 @@
+ #define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
+ 
+ #define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
+-#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
++#define IEI_WT61P803_PUZZLE_CMD_LED_SET(n)		(0x30 | (n))
+ 
+ #define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
+ #define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
+--- a/drivers/mfd/iei-wt61p803-puzzle.c
++++ b/drivers/mfd/iei-wt61p803-puzzle.c
+@@ -176,6 +176,9 @@ static int iei_wt61p803_puzzle_recv_buf(
+ 	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
+ 	int ret;
+ 
++	print_hex_dump_debug("puzzle-mcu rx: ", DUMP_PREFIX_NONE,
++			     16, 1, data, size, false);
++
+ 	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
+ 	/* Return the number of processed bytes if function returns error,
+ 	 * discard the remaining incoming data, since the frame this data
+@@ -246,6 +249,9 @@ int iei_wt61p803_puzzle_write_command(st
+ 
+ 	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
+ 
++	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
++			     16, 1, cmd, size, false);
++
+ 	/* Initialize reply struct */
+ 	reinit_completion(&mcu->reply->received);
+ 	mcu->reply->size = 0;

target/linux/mvebu/patches-6.6/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch

@@ -0,0 +1,63 @@
+--- a/drivers/mfd/iei-wt61p803-puzzle.c
++++ b/drivers/mfd/iei-wt61p803-puzzle.c
+@@ -241,6 +241,7 @@ int iei_wt61p803_puzzle_write_command(st
+ {
+ 	struct device *dev = &mcu->serdev->dev;
+ 	int ret;
++	int retries;
+ 
+ 	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
+ 		return -EINVAL;
+@@ -252,24 +253,36 @@ int iei_wt61p803_puzzle_write_command(st
+ 	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
+ 			     16, 1, cmd, size, false);
+ 
++	retries = 3;
+ 	/* Initialize reply struct */
+-	reinit_completion(&mcu->reply->received);
+-	mcu->reply->size = 0;
+-	usleep_range(2000, 10000);
+-	serdev_device_write_flush(mcu->serdev);
+-	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
+-	if (ret < 0)
+-		goto exit;
+-
+-	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
+-	ret = wait_for_completion_timeout(&mcu->reply->received,
+-					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
+-	if (ret == 0) {
+-		dev_err(dev, "Command reply receive timeout\n");
+-		ret = -ETIMEDOUT;
+-		goto exit;
++	while (retries) {
++		reinit_completion(&mcu->reply->received);
++		mcu->reply->size = 0;
++		usleep_range(2000, 10000);
++		serdev_device_write_flush(mcu->serdev);
++		ret = serdev_device_write_buf(mcu->serdev, cmd, size);
++		if (ret < 0)
++			goto exit;
++
++		serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
++		ret = wait_for_completion_timeout(&mcu->reply->received,
++						  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
++		retries--;
++		if (ret == 0) {
++			if (retries == 0) {
++				dev_err(dev, "Command reply receive timeout\n");
++				ret = -ETIMEDOUT;
++				goto exit;
++			}
++		}
++		else {
++			if (mcu->reply->data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
++				mcu->reply->data[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
++				mcu->reply->data[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK) {
++				break;
++			}
++		}
+ 	}
+-
+ 	*reply_size = mcu->reply->size;
+ 	/* Copy the received data, as it will not be available after a new frame is received */
+ 	memcpy(reply_data, mcu->reply->data, mcu->reply->size);