treewide: drop shebang from non-executable target files

This drops the shebang from all target files for /lib and
/etc/uci-defaults folders, as these are sourced and the shebang
is useless.

While at it, fix the executable flag on a few of these files.

This does not touch ar71xx, as this target is just used for
backporting now and applying cosmetic changes would just complicate
things.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 preinit_set_mac_address() {
 	. /lib/functions.sh
 

target/linux/apm821xx/base-files/lib/preinit/05_set_preinit_iface_apm821xx

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 apm821xx_set_preinit_iface() {
 	ifname=eth0
 }

target/linux/apm821xx/base-files/lib/preinit/79_move_config

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 BOOTPART=/dev/sda1
 
 move_config() {

target/linux/apm821xx/base-files/lib/upgrade/platform.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 PART_NAME=firmware
 REQUIRE_IMAGE_METADATA=1
 

target/linux/arc770/base-files/lib/arc.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2015 OpenWrt.org
 #

target/linux/arc770/base-files/lib/preinit/01_preinit_arc.sh

@@ -1,9 +1,7 @@
-#!/bin/sh
-
 do_arc() {
-        . /lib/arc.sh
+	. /lib/arc.sh
 
-        arc_board_detect
+	arc_board_detect
 }
 
 boot_hook_add preinit_main do_arc

target/linux/archs38/base-files/lib/preinit/01_preinit_arc.sh

@@ -1,9 +1,7 @@
-#!/bin/sh
-
 do_arc() {
-        . /lib/arc.sh
+	. /lib/arc.sh
 
-        arc_board_detect
+	arc_board_detect
 }
 
 boot_hook_add preinit_main do_arc

target/linux/at91/base-files/lib/at91.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2014 OpenWrt.org
 #

target/linux/at91/base-files/lib/preinit/01_preinit_do_at91.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 do_at91() {
 	. /lib/at91.sh
 

target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 # reset button only supported on ar5315+ at the moment
 preinit_ip() {
 	if [ -z "$pi_ifname" ]; then

target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum

@@ -1,4 +1,3 @@
-#!/bin/sh
 . /lib/functions.sh
 
 fix_seama_header() {

target/linux/ath79/generic/base-files/lib/functions/k2t.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2018 Weijie Gao <[email protected]>
 #

target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 
 preinit_set_mac_address() {

target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/bcm27xx/base-files/lib/preinit/05_set_preinit_iface_brcm2708

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2015-2016 OpenWrt.org
 # Copyright (C) 2017 LEDE project
 

target/linux/bcm27xx/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2015 OpenWrt.org
 
 . /lib/upgrade/common.sh

target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2014-2015 OpenWrt.org
 #

target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc

@@ -1,7 +1,5 @@
-#!/bin/sh
 #
 # Copyright (C) 2007 OpenWrt.org
 #
-#
 
 mtd fixtrx firmware

target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 do_sysinfo_bcm47xx() {
 	local boardtype="$(nvram get boardtype)"
 	local boardnum="$(nvram get boardnum)"

target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"\(kernel\|linux\)".*/\1/p' /proc/mtd)
 
 mtd ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0

target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc

@@ -1,8 +1,6 @@
-#!/bin/sh
 #
 # Copyright (C) 2007 OpenWrt.org
 #
-#
 
 . /lib/functions.sh
 

target/linux/cns3xxx/base-files/lib/cns3xxx.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 CNS3XXX_BOARD_NAME=
 CNS3XXX_MODEL=
 

target/linux/cns3xxx/base-files/lib/preinit/01_sysinfo

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 do_sysinfo_cns3xxx() {
 	. /lib/cns3xxx.sh
 

target/linux/gemini/base-files/etc/uci-defaults/09_fix-checksum

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2019 OpenWrt.org
 #

target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/system.sh
 

target/linux/imx6/base-files/lib/imx6.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2010-2013 OpenWrt.org
 #

target/linux/imx6/base-files/lib/preinit/01_sysinfo

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 do_sysinfo_imx6() {
 	. /lib/imx6.sh
 

target/linux/imx6/base-files/lib/preinit/79_move_config

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/imx6.sh
 . /lib/functions.sh
 . /lib/upgrade/common.sh

target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 
 preinit_set_mac_address() {

target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 set_preinit_iface() {
 	. /lib/functions.sh
 

target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2018 OpenWrt.org
 #
 

target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2013 OpenWrt.org
 #

target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 
 IFNAME_CHANGED=0

target/linux/layerscape/base-files/lib/preinit/05_layerscape_reorder_eth

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 reorder_layerscape_interfaces() {
 	if [ ! -f /tmp/sysinfo/board_name ]; then
 		echo "No board name found, not doing reorder_layerscape_interfaces"

target/linux/layerscape/base-files/lib/upgrade/platform.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright 2015-2019 Traverse Technologies
 #

target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 set_preinit_iface() {
 	ifconfig eth0 up
 	ifname=lan1

target/linux/mediatek/base-files/lib/preinit/06_set_rps_sock_flow

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 set_rps_sock_flow() {
 	echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
 }

target/linux/mediatek/mt7623/base-files/lib/preinit/07_set_iface_mac

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2018 OpenWrt.org
 
 RECOVERY_PART=/dev/mmcblk0p1

target/linux/mediatek/mt7623/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2015 OpenWrt.org
 
 . /lib/upgrade/common.sh

target/linux/mpc85xx/base-files/lib/preinit/05_set_preinit_iface_mpc85xx

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2013 OpenWrt.org
 #

target/linux/mvebu/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2015 OpenWrt.org
 
 . /lib/functions.sh

target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/03_wireless

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2015 OpenWrt.org
 #

target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/04_mambafan

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2017 LEDE-Project.org
 #

target/linux/octeon/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2014 OpenWrt.org
 
 move_config() {

target/linux/omap/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2012-2015 OpenWrt.org
 
 move_config() {

target/linux/pistachio/base-files/lib/upgrade/platform.sh

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2017 OpenWrt.org
 #

target/linux/ramips/base-files/etc/uci-defaults/09_fix-checksum

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2012 OpenWrt.org
 #

target/linux/ramips/mt7620/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/ramips/mt7621/base-files/lib/preinit/07_mt7621_bringup_dsa_master

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 
 mt7621_bringup_dsa_master() {

target/linux/ramips/mt76x8/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/ramips/rt305x/base-files/etc/uci-defaults/04_led_migration

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions.sh
 . /lib/functions/migrations.sh
 

target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 # Netgear WNCE2001 has does a checksum check on boot and goes into recovery
 # tftp mode when the check fails.  Initializing the JFFS2 partition triggers
 # this, so we make sure to zero checksum and size to be checksummed before

target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 # Netgear WNCE2001 has does a checksum check on boot and goes into recovery
 # tftp mode when the check fails.  Initializing the JFFS2 partition triggers
 # this, so we make sure to zero checksum and size to be checksummed before

target/linux/x86/64/base-files/lib/preinit/45_mount_xenfs

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2010 OpenWrt.org
 
 do_mount_xenfs() {

target/linux/x86/base-files/lib/preinit/02_load_x86_ucode

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2018 OpenWrt.org
 
 do_load_x86_ucode() {

target/linux/x86/base-files/lib/preinit/15_essential_fs_x86

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2006-2010 OpenWrt.org
 # Copyright (C) 2010 Vertical Communications
 

target/linux/x86/base-files/lib/preinit/79_move_config

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2012-2015 OpenWrt.org
 
 move_config() {

target/linux/x86/base-files/lib/preinit/81_upgrade_bootloader

@@ -1,5 +1,3 @@
-#!/bin/sh
-
 upgrade_bootloader() {
 	local diskdev
 

target/linux/x86/generic/base-files/lib/preinit/45_mount_xenfs

@@ -1,4 +1,3 @@
-#!/bin/sh
 # Copyright (C) 2010 OpenWrt.org
 
 do_mount_xenfs() {