realtek: switch RTL838X/RTL839X DT to new clock driver

Use new DT clockdriver syntax for RTL838X/RTL839X targets. To make it work
we need to change some nodes:
- define the external oscillator speed (25MHz)
- define SRAM
- add clock controller
- Add second CPU for RTL839X
- map all devices to new clocks
- Remove dummy LXB clock
- add CPU OPP table

Signed-off-by: Markus Stockhausen <[email protected]>

target/linux/realtek/dts-5.10/rtl838x.dtsi

@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/clock/rtl83xx-clk.h>
+
 /dts-v1/;
 
 #define STRINGIZE(s) #s
@@ -60,25 +62,63 @@
 
 	compatible = "realtek,rtl838x-soc";
 
+	osc: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	ccu: clock-controller {
+		compatible = "realtek,rtl8380-clock";
+		#clock-cells = <1>;
+		clocks = <&osc>;
+		clock-names = "ref_clk";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		frequency = <500000000>;
 
 		cpu@0 {
 			compatible = "mips,mips4KEc";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,115200";
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <325000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <350000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <375000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <425000000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <450000000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <475000000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <500000000>;
+		};
 	};
 
-	lx_clk: lx_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
+	chosen {
+		bootargs = "console=ttyS0,115200";
 	};
 
 	cpuintc: cpuintc {
@@ -116,7 +156,7 @@
 			compatible = "ns16550a";
 			reg = <0x2000 0x100>;
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 
 			interrupt-parent = <&intc>;
 			interrupts = <31 1>;
@@ -134,7 +174,7 @@
 			compatible = "ns16550a";
 			reg = <0x2100 0x100>;
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 
 			interrupt-parent = <&intc>;
 			interrupts = <30 0>;
@@ -153,7 +193,7 @@
 
 			realtek,reset-mode = "soc";
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 			timeout-sec = <30>;
 
 			interrupt-parent = <&intc>;
@@ -220,6 +260,14 @@
 		};
 	};
 
+	sram0: sram@9f000000 {
+		compatible = "mmio-sram";
+		reg = <0x9f000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x9f000000 0x10000>;
+	};
+
 	switch0: switch@1b000000 {
 		compatible = "realtek,rtl83xx-switch";
 

target/linux/realtek/dts-5.10/rtl839x.dtsi

@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/clock/rtl83xx-clk.h>
+
 /dts-v1/;
 
 #define STRINGIZE(s) #s
@@ -53,25 +55,88 @@
 
 	compatible = "realtek,rtl839x-soc";
 
+	osc: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	ccu: clock-controller {
+		compatible = "realtek,rtl8390-clock";
+		#clock-cells = <1>;
+		clocks = <&osc>;
+		clock-names = "ref_clk";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		frequency = <700000000>;
 
 		cpu@0 {
 			compatible = "mips,mips34Kc";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu@1 {
+			compatible = "mips,mips34Kc";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,115200";
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <425000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <450000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <475000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <525000000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <550000000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <575000000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <625000000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <650000000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <675000000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <700000000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <725000000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
 	};
 
-	lx_clk: lx_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
+	chosen {
+		bootargs = "console=ttyS0,115200";
 	};
 
 	cpuintc: cpuintc {
@@ -109,7 +174,7 @@
 			compatible = "ns16550a";
 			reg = <0x2000 0x100>;
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 
 			interrupt-parent = <&intc>;
 			interrupts = <31 1>;
@@ -127,7 +192,7 @@
 			compatible = "ns16550a";
 			reg = <0x2100 0x100>;
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 
 			interrupt-parent = <&intc>;
 			interrupts = <30 2>;
@@ -160,7 +225,7 @@
 
 			realtek,reset-mode = "soc";
 
-			clocks = <&lx_clk>;
+			clocks = <&ccu CLK_LXB>;
 			timeout-sec = <30>;
 
 			interrupt-parent = <&intc>;
@@ -215,6 +280,14 @@
 		};
 	};
 
+	sram0: sram@9f000000 {
+		compatible = "mmio-sram";
+		reg = <0x9f000000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x9f000000 0x18000>;
+	};
+
 	switch0: switch@1b000000 {
 		status = "okay";
 		compatible = "realtek,rtl83xx-switch";