mvebu: switch to kernel 6.6

Update default kernel version to 6.6 and drop configs and patches for
kernel 6.1. We can also omit the conditional to include DTS dir.

Signed-off-by: Stefan Kalscheuer <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/15449
Signed-off-by: Robert Marko <[email protected]>

target/linux/mvebu/Makefile

@@ -9,8 +9,7 @@ BOARDNAME:=Marvell EBU Armada
 FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk boot-part rootfs-part legacy-sdcard targz
 SUBTARGETS:=cortexa9 cortexa53 cortexa72
 
-KERNEL_PATCHVER:=6.1
-KERNEL_TESTING_PATCHVER:=6.6
+KERNEL_PATCHVER:=6.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mvebu/config-6.1

@@ -1,447 +0,0 @@
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_ESSIV=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=2
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-# CONFIG_MVPP2 is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_DSA_COMMON=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-# CONFIG_NVME_MULTIPATH is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_POOL_STATS=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOC_BUS=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y

target/linux/mvebu/cortexa53/config-6.1

@@ -1,92 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
-CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_37XX_RWTM_MBOX=y
-CONFIG_ARMADA_37XX_WATCHDOG=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_MHU_V2 is not set
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MFD_SYSCON=y
-# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PINCTRL_AC5=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_TURRIS_MOX_RWTM=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y

target/linux/mvebu/cortexa72/config-6.1

@@ -1,111 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_AQUANTIA_PHY=y
-CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
-CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CPU_CLK=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
-CONFIG_ARM_ARMADA_8K_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CRC_CCITT=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_LEDS_IEI_WT61P803_PUZZLE=y
-CONFIG_LEDS_IS31FL319X=y
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_IEI_WT61P803_PUZZLE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_NVMEM_LAYOUT_ONIE_TLV=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PHY_MVEBU_CP110_UTMI=y
-CONFIG_PINCTRL_AC5=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
-CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y

target/linux/mvebu/cortexa9/config-6.1

@@ -1,12 +0,0 @@
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_IRQSTACKS=y
-CONFIG_LED_TRIGGER_PHY=y
-CONFIG_MTD_SPLIT_SEIL_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-CONFIG_POWER_RESET_QNAP=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_THREAD_INFO_IN_TASK=y

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts

@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS220DE
- *
- * Copyright (C) 2023 Daniel González Cabanelas <[email protected]>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	model = "Buffalo LinkStation LS220DE";
-	compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		led-boot = &led_boot;
-		led-failsafe = &led_failsafe;
-		led-running = &led_power;
-		led-upgrade = &led_upgrade;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:115200n8";
-		append-rootblock = "nullparameter="; /* override the bootloader args */
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-	};
-
-	system_fan: gpio_fan {
-		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
-			 &gpio0 14 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
-		#cooling-cells = <2>;
-	};
-
-	thermal-zones {
-		hdd-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
-			trips {
-				hdd_alert1: trip1 {
-					temperature = <34000>;
-					hysteresis = <2000>;
-					type = "active";
-				};
-				hdd_alert2: trip2 {
-					temperature = <40000>;
-					hysteresis = <2000>;
-					type = "active";
-				};
-				hdd_alert3: trip3 {
-					temperature = <45000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				hdd_hot {
-					temperature = <50000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				hdd_crit {
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&hdd_alert1>;
-					cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
-				};
-				map2 {
-					trip = <&hdd_alert2>;
-					cooling-device = <&system_fan 2 2>;
-				};
-				map3 {
-					trip = <&hdd_alert3>;
-					cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Switch";
-			linux,code = <KEY_POWER>;
-			linux,input-type = <EV_SW>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		function {
-			label = "Function Button";
-			linux,code = <KEY_CONFIG>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
-		indicator_red {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		led_power: power_white {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_failsafe: power_red {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_upgrade: power_orange {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_boot: indicator_white {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd1_red {
-			function = LED_FUNCTION_DISK;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ata1";
-			function-enumerator = <1>;
-		};
-
-		hdd2_red {
-			function = LED_FUNCTION_DISK;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ata2";
-			function-enumerator = <2>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>;
-		pinctrl-names = "default";
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "HDD1";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD2";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&coherencyfab {
-	broken-idle;
-};
-
-&eth1 {
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "rgmii-id";
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-		marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */
-				   <0x3 0x11 0x0000 0x4401>, /* LED polarity */
-				   <0x3 0x12 0x0000 0x4905>; /* LED timer */
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi_kernel";
-				reg = <0x00000000 0x02000000>; /* 32 MiB */
-			};
-
-			partition@2000000 {
-				label = "ubi";
-				reg = <0x02000000 0x1df00000>; /* 479 MiB */
-			};
-		};
-	};
-};
-
-&sata {
-	nr-ports = <2>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hdd0_temp: sata-port@0 {
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	hdd1_temp: sata-port@1 {
-		reg = <1>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x00000 0xf0000>; /* 960 KiB*/
-				label = "u-boot";
-				read-only;
-			};
-			partition@f0000 {
-				reg = <0xf0000 0x10000>; /* 64 KiB */
-				label = "u-boot-env";
-			};
-		};
-	};
-};
-
-&pmsu {
-	pinctrl-0 = <&pmx_power_cpu>;
-	pinctrl-names = "default";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&pinctrl {
-	pmx_power_hdd2: pmx-power-hdd2 {
-		marvell,pins = "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_cpu: pmx-power-cpu {
-		marvell,pins = "mpp4";
-		marvell,function = "vdd";
-	};
-
-	pmx_power_hdd1: pmx-power-hdd1 {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_lock: pmx-fan-lock {
-		marvell,pins = "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_hdd_present: pmx-hdd-present {
-		marvell,pins = "mpp11", "mpp12";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_high: pmx-fan-high {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_low: pmx-fan-low {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp15", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds1: pmx-leds {
-		marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
-		marvell,function = "gpo";
-	};
-
-	pmx_leds2: pmx-leds {
-		marvell,pins = "mpp55", "mpp57", "mpp62";
-		marvell,function = "gpio";
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts

@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS421DE
- *
- * Copyright (C) 2020 Daniel González Cabanelas <[email protected]>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	model = "Buffalo LinkStation LS421DE";
-	compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		led-boot = &led_boot;
-		led-failsafe = &led_failsafe;
-		led-running = &led_power;
-		led-upgrade = &led_upgrade;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:115200n8";
-		append-rootblock = "nullparameter="; /* override the bootloader args */
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-	};
-
-	system_fan: gpio_fan {
-		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
-			 &gpio0 14 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
-		#cooling-cells = <2>;
-	};
-
-	thermal-zones {
-		hdd-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
-
-			trips {
-				hdd_alert1: trip1 {
-					temperature = <36000>;
-					hysteresis = <2000>;
-					type = "active";
-				};
-				hdd_alert2: trip2 {
-					temperature = <44000>;
-					hysteresis = <2000>;
-					type = "active";
-				};
-				hdd_alert3: trip3 {
-					temperature = <52000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				hdd_crit: trip4 {
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&hdd_alert1>;
-					cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
-				};
-				map2 {
-					trip = <&hdd_alert2>;
-					cooling-device = <&system_fan 2 2>;
-				};
-				map3 {
-					trip = <&hdd_alert3>;
-					cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		ethphy-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&ethphy0>;
-
-			trips {
-				ethphy_alert1: trip1 {
-					temperature = <65000>;
-					hysteresis = <4000>;
-					type = "passive";
-				};
-
-				ethphy_crit: trip2 {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&ethphy_alert1>;
-					cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Switch";
-			linux,code = <KEY_POWER>;
-			linux,input-type = <EV_SW>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		function {
-			label = "Function Button";
-			linux,code = <KEY_CONFIG>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
-		system_red {
-			label = "ls421de:red:system";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_power: power_white {
-			label = "ls421de:white:power";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_failsafe: power_red {
-			label = "ls421de:red:power";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_upgrade: power_orange {
-			label = "ls421de:orange:power";
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_boot: system_white {
-			label = "ls421de:white:system";
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd1_red {
-			label = "ls421de:red:hdd1";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ata1";
-		};
-
-		hdd2_red {
-			label = "ls421de:red:hdd2";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ata2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "HDD1";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD2";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&coherencyfab {
-	broken-idle;
-};
-
-&eth1 {
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <100000>;
-	status = "okay";
-
-	rs5c372a: rs5c372a@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-		wakeup-source;
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
-		reg = <0>;
-		marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */
-				   <0x3 0x10 0x0000 0x1991>, /* LED function */
-				   <0x3 0x11 0x0000 0x4401>, /* LED polarity */
-				   <0x3 0x12 0x0000 0x4905>; /* LED timer */
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&pciec {
-	status = "okay";
-	pinctrl-0 = <&pmx_pcie>;
-	pinctrl-names = "default";
-
-	/* Connected to uPD720202 USB 3.0 Host */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&pmsu {
-	pinctrl-0 = <&pmx_power_cpu>;
-	pinctrl-names = "default";
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&sata {
-	nr-ports = <2>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hdd0_temp: sata-port@0 {
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	hdd1_temp: sata-port@1 {
-		reg = <1>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins2>;
-	pinctrl-names = "default";
-	status = "okay";
-	/* No CD or WP GPIOs */
-	broken-cd;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x02000000>;  /* 32 MiB */
-			};
-
-			partition@2000000 {
-				label = "ubi";
-				reg = <0x02000000 0x1e000000>;  /* 480 MiB */
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x00000 0xf0000>; /* 960 KiB*/
-				label = "u-boot";
-				read-only;
-			};
-			partition@f0000 {
-				reg = <0xf0000 0x10000>; /* 64 KiB */
-				label = "u-boot-env";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pmx_power_cpu: pmx-power-cpu {
-		marvell,pins = "mpp4";
-		marvell,function = "vdd";
-	};
-
-	pmx_power_usb: pmx-power-usb {
-		marvell,pins = "mpp5";
-		marvell,function = "gpo";
-	};
-
-	pmx_power_hdd1: pmx-power-hdd1 {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_hdd2: pmx-power-hdd2 {
-		marvell,pins = "mpp9";
-		marvell,function = "gpo";
-	};
-
-	pmx_fan_lock: pmx-fan-lock {
-		marvell,pins = "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_hdd_present: pmx-hdd-present {
-		marvell,pins = "mpp11", "mpp12";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_high: pmx-fan-high {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_low: pmx-fan-low {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp15", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds1: pmx-leds {
-		marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
-		marvell,function = "gpo";
-	};
-
-	pmx_leds2: pmx-leds {
-		marvell,pins = "mpp55", "mpp57", "mpp62";
-		marvell,function = "gpio";
-	};
-
-	pmx_pcie: pmx-pcie {
-		marvell,pins = "mpp56", "mpp60";
-		marvell,function = "pcie";
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-370-c200-v2.dts

@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Ctera C200-V2
- *
- * Copyright (C) 2021 Pawel Dembicki <[email protected]>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Ctera C200 V2";
-	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_red;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1024 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-	};
-
-	thermal-zones {
-		ethphy-thermal {
-			polling-delay = <20000>;
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&ethphy0>;
-
-			trips {
-				ethphy_alert1: trip1 {
-					temperature = <65000>;
-					hysteresis = <4000>;
-					type = "passive";
-				};
-
-				ethphy_crit: trip2 {
-					temperature = <100000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		usb1 {
-			label = "USB1 Button";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "USB2 Button";
-			linux,code = <BTN_1>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-		pinctrl-names = "default";
-
-		led-0 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
-		};
-
-		led-2 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
-		};
-
-		led-4 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata2";
-		};
-
-		led-5 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led-6 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <2>;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-		};
-
-		led-7 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-8 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		};
-
-		led-9 {
-			function = LED_FUNCTION_DISK_ERR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_red: led-10 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		};
-
-		led-11 {
-			function = LED_FUNCTION_DISK;
-			function-enumerator = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ata1";
-		};
-
-		led_status_green: led-12 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&coherencyfab {
-	broken-idle;
-};
-
-&eth1 {
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <100000>;
-	status = "okay";
-
-	hwmon@2a {
-		compatible = "nuvoton,nct7802";
-		reg = <0x2a>;
-	};
-
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0x200000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "certificate";
-				reg = <0x0200000 0x100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "preset_cfg";
-				reg = <0x0300000 0x100000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "dev_params";
-				reg = <0x0400000 0x100000>;
-				read-only;
-			};
-			partition@500000 {
-				label = "active_bank";
-				reg = <0x0500000 0x0100000>;
-			};
-
-			partition@600000 {
-				label = "magic";
-				reg = <0x0600000 0x0100000>;
-				read-only;
-			};
-
-			partition@700000 {
-				label = "bank1";
-				reg = <0x0700000 0x2800000>;
-			};
-
-			partition@2f00000 {
-				label = "bank2";
-				reg = <0x2f00000 0x2800000>;
-			};
-
-			/* 0x5700000-0x5a00000 undefined in vendor firmware */
-
-			partition@5a00000 {
-				label = "reserved";
-				reg = <0x5a00000 0x2000000>;
-			};
-
-			partition@7a00000 {
-				label = "ubi";
-				reg = <0x7a00000 0x8600000>;
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 {
-		pinctrl-0 = <&pmx_pcie>;
-		pinctrl-names = "default";
-		status = "okay";
-		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-
-		/* -[0000:00]---01.0-[01]----00.0 */
-		/* usbport trigger won't work */
-		bridge@0,1 {
-			compatible = "pci11ab,6710";
-			reg = <0x3800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			usb@1,0 {
-				/* Renesas uPD720202 */
-				compatible = "pci1912,0015";
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				usb1_port: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <1>;
-				};
-
-				usb2_port: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <1>;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pmx_poweroff: pmx-poweroff {
-		marvell,pins = "mpp7";
-		marvell,function = "gpo";
-	};
-
-	pmx_power_cpu: pmx-power-cpu {
-		marvell,pins = "mpp4";
-		marvell,function = "vdd";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds1: pmx-leds1 {
-		marvell,pins = "mpp47";
-		marvell,function = "gpo";
-	};
-
-	pmx_leds2: pmx-leds2 {
-		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
-			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
-		marvell,function = "gpio";
-	};
-
-	pmx_pcie: pmx-pcie {
-		marvell,pins = "mpp59";
-		marvell,function = "gpio";
-	};
-
-	/* this gpio is connected to the pin of buzzer
-	 * leave it as is due lack of proper driver
-	 */
-	pmx_buzzer: pmx-buzzer {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-};
-
-&pmsu {
-	pinctrl-0 = <&pmx_power_cpu>;
-	pinctrl-names = "default";
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&sata {
-	nr-ports = <2>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hdd0_temp: sata-port@0 {
-		reg = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	hdd1_temp: sata-port@1 {
-		reg = <1>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-380-iij-sa-w2.dts

@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-380.dtsi"
-
-/ {
-	model = "IIJ SA-W2";
-	compatible = "iij,sa-w2", "marvell,armada380";
-
-	aliases {
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-		label-mac-device = &ge0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		pcie {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_keys_pins>;
-
-		button-init {
-			label = "init";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_leds_pins>;
-
-		led-0 {
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_WLAN_5GHZ;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		led-1 {
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_WLAN_5GHZ;
-		};
-
-		led-2 {
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-3 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-4 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_MOBILE;
-		};
-
-		led-5 {
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_MOBILE;
-		};
-
-		led-6 {
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_WLAN_2GHZ;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		led-7 {
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_WLAN_2GHZ;
-		};
-
-		led_power_green: led-8 {
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_POWER;
-		};
-
-		led_power_red: led-9 {
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_POWER;
-		};
-
-		led-10 {
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_USB;
-			function-enumerator = <1>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port2>;
-		};
-
-		led-11 {
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_USB;
-			function-enumerator = <0>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&hub_port1>;
-		};
-	};
-
-	regulator-vbus-usb0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus-usb0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	regulator-vbus-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus-usb1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&pinctrl {
-	pmx_usb_pins: usb-pins {
-		marvell,pins = "mpp2",		 /* smsc usb2514b reset */
-			       "mpp48", "mpp49", /* port over current */
-			       "mpp52", "mpp53"; /* port vbus */
-		marvell,function = "gpio";
-	};
-
-	pmx_keys_pins: keys-pins {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_leds_pins: leds-pins {
-		marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35",
-			       "mpp36", "mpp44", "mpp45", "mpp46", "mpp47",
-			       "mpp54", "mpp55";
-		marvell,function = "gpio";
-	};
-};
-
-&gpio0 {
-	usb-hub-reset {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmx_usb_pins>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* SMSC USB2514B on PCB */
-	hub@1 {
-		compatible = "usb424,2514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hub_port1: port@1 {
-			reg = <1>;
-			#trigger-source-cells = <0>;
-		};
-
-		hub_port2: port@2 {
-			reg = <2>;
-			#trigger-source-cells = <0>;
-		};
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	status = "okay";
-
-	phy-connection-type = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	bm,pool-short = <3>;
-
-	nvmem-cells = <&macaddr_bdinfo_6 1>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	/* Marvell 88E6172 */
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		reg = <0x0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "ge1_0";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "ge1_1";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "ge1_2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "ge1_3";
-			};
-
-			ge0: port@4 {
-				reg = <4>;
-				label = "ge0";
-				nvmem-cells = <&macaddr_bdinfo_6 0>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			/*
-			 * eth0 is connected to port5 for WAN connection
-			 * on port4 ("GE0")
-			 */
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				phy-connection-type = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x100000>;
-				label = "bootloader";
-				read-only;
-			};
-
-			partition@100000 {
-				reg = <0x100000 0x10000>;
-				label = "bootloader-env";
-				read-only;
-			};
-
-			partition@110000 {
-				reg = <0x110000 0xf0000>;
-				label = "board_info";
-				read-only;
-
-				nvmem-layout {
-					compatible = "fixed-layout";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_bdinfo_6: macaddr@6 {
-						compatible = "mac-base";
-						reg = <0x6 0x6>;
-						#nvmem-cell-cells = <1>;
-					};
-				};
-			};
-
-			partition@200000 {
-				compatible = "iij,seil-firmware";
-				reg = <0x200000 0xf00000>;
-				label = "firmware";
-				iij,bootdev-name = "flash";
-				iij,seil-id = <0x5345494c 0x32303135>;
-			};
-
-			partition@1100000 {
-				compatible = "iij,seil-firmware";
-				reg = <0x1100000 0xf00000>;
-				label = "rescue";
-				iij,bootdev-name = "rescue";
-				iij,seil-id = <0x5345494c 0x32303135>;
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts

@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
-	model = "Fortinet FortiGate 30E";
-	compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1GB */
-	};
-};
-
-&gpio_leds {
-	led-14 {
-		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_SPEED_WAN;
-		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
-	};
-
-	led-15 {
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_WAN;
-		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
-	};
-};
-
-&pinctrl {
-	pmx_switch_pins: switch-pins {
-		marvell,pins = "mpp19";
-		marvell,function = "gpio";
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
-
-	/* Marvell 88E6176 */
-	switch@2 {
-		compatible = "marvell,mv88e6085";
-		reg = <0x2>;
-		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "wan";
-				nvmem-cells = <&macaddr_bdinfo_d880 1>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-				nvmem-cells = <&macaddr_bdinfo_d880 5>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-				nvmem-cells = <&macaddr_bdinfo_d880 4>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-				nvmem-cells = <&macaddr_bdinfo_d880 3>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-				nvmem-cells = <&macaddr_bdinfo_d880 2>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@6 {
-				reg = <6>;
-				ethernet = <&eth0>;
-				phy-connection-type = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts

@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
-	model = "Fortinet FortiGate 50E";
-	compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-};
-
-&gpio_leds {
-	led-14 {
-		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_WAN;
-		function-enumerator = <1>;
-		linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
-	};
-
-	led-15 {
-		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_WAN;
-		function-enumerator = <2>;
-		linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
-	};
-
-	led-16 {
-		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_SPEED_LAN;
-		function-enumerator = <5>;
-		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
-	};
-
-	led-17 {
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_LAN;
-		function-enumerator = <5>;
-		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
-	};
-};
-
-&pinctrl {
-	pmx_phy_switch_pins: phy-switch-pins {
-		marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
-		marvell,function = "gpio";
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	nvmem-cells = <&macaddr_bdinfo_d880 1>;
-	nvmem-cell-names = "mac-address";
-};
-
-&eth2 {
-	status = "okay";
-
-	phy-handle = <&ethphy1>;
-	phy-connection-type = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <3>;
-	nvmem-cells = <&macaddr_bdinfo_d880 2>;
-	nvmem-cell-names = "mac-address";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
-
-	/* Marvell 88E1512 */
-	ethphy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0141,0dd1",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <10000>;
-		/*
-		 * LINK/ACT   (Green): LED[0], Active Low
-		 * SPEED 100M (Amber): LED[1], Active High
-		 */
-		marvell,reg-init = <3 16 0 0x71>,
-				   <3 17 0 0x4>;
-	};
-
-	/* Marvell 88E1512 */
-	ethphy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0141,0dd1",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <10000>;
-		/*
-		 * LINK/ACT   (Green): LED[0], Active Low
-		 * SPEED 100M (Amber): LED[1], Active High
-		 */
-		marvell,reg-init = <3 16 0 0x71>,
-				   <3 17 0 0x4>;
-	};
-
-	/* Marvell 88E6176 */
-	switch@2 {
-		compatible = "marvell,mv88e6085";
-		reg = <0x2>;
-		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-				nvmem-cells = <&macaddr_bdinfo_d880 7>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-				nvmem-cells = <&macaddr_bdinfo_d880 6>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-				nvmem-cells = <&macaddr_bdinfo_d880 5>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-				nvmem-cells = <&macaddr_bdinfo_d880 4>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-				nvmem-cells = <&macaddr_bdinfo_d880 3>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@6 {
-				reg = <6>;
-				ethernet = <&eth0>;
-				phy-connection-type = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-fortinet-fg-x0e.dtsi

@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_green;
-		label-mac-device = &eth0;
-	};
-
-	chosen {
-		stdout-path = "serial0:9600n8";
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_gpio_keys_pins>;
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmx_gpio_leds_pins>;
-
-		led-0 {
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_ALARM;
-		};
-
-		led-1 {
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_RED>;
-			function = "ha";
-		};
-
-		led_status_green: led-2 {
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-3 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = "ha";
-		};
-
-		led-4 {
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_ALARM;
-		};
-
-		led_status_red: led-5 {
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_STATUS;
-		};
-
-		led-6 {
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <4>;
-			linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
-		};
-
-		led-7 {
-			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <4>;
-			linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
-		};
-
-		led-8 {
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <3>;
-			linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
-		};
-
-		led-9 {
-			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <3>;
-			linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
-		};
-
-		led-10 {
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <1>;
-			linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
-		};
-
-		led-11 {
-			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <1>;
-			linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
-		};
-
-		led-12 {
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <2>;
-			linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
-		};
-
-		led-13 {
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_SPEED_LAN;
-			function-enumerator = <2>;
-			linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
-		};
-	};
-
-	reg_usb_vbus: regulator-usb-vbus {
-		compatible = "fixed-regulator";
-		regulator-name = "usb-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	gpio2: gpio@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-	};
-
-	hwmon@28 {
-		compatible = "nuvoton,nct7802";
-		reg = <0x28>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&pinctrl {
-	pmx_gpio_leds_pins: gpio-leds-pins {
-		marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35",
-			       "mpp45", "mpp47";
-		marvell,function = "gpio";
-	};
-
-	pmx_usb_pins: usb-pins {
-		marvell,pins = "mpp53";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_keys_pins: gpio-keys-pins {
-		marvell,pins = "mpp54";
-		marvell,function = "gpio";
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	status = "okay";
-
-	phy-connection-type = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	nvmem-cells = <&macaddr_bdinfo_d880 0>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&usb3_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmx_usb_pins>;
-	status = "okay";
-
-	vbus-supply = <&reg_usb_vbus>;
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x1c0000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@1c0000 {
-				reg = <0x1c0000 0x10000>;
-				label = "firmware-info";
-
-				/*
-				 *  0x10 - 0x2f : image name (image1)
-				 *  0x30 - 0x4f : image name (image2)
-				 * 0x170 (1byte): active image (0x0/0x1)
-				 * 0x184 - 0x185: kernel block count (image1)
-				 * 0x18c - 0x18d: rootfs block count (image1)
-				 * 0x194 - 0x195: kernel block count (image2)
-				 * 0x19c - 0x19d: rootfs block count (image2)
-				 * 0x1be (1byte): bit7 -> active flag (image1)?
-				 * 0x1ce (1byte): bit7 -> active flag (image2)?
-				 *
-				 * Note: block size --> 0x200 (512 bytes)
-				 */
-			};
-
-			partition@1d0000 {
-				reg = <0x1d0000 0x10000>;
-				label = "dtb";
-				read-only;
-			};
-
-			partition@1e0000 {
-				reg = <0x1e0000 0x10000>;
-				label = "u-boot-env";
-				read-only;
-			};
-
-			partition@1f0000 {
-				reg = <0x1f0000 0x10000>;
-				label = "board-info";
-				read-only;
-
-				nvmem-layout {
-					compatible = "fixed-layout";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_bdinfo_d880: macaddr@d880 {
-						compatible = "mac-base";
-						reg = <0xd880 0x6>;
-						#nvmem-cell-cells = <1>;
-					};
-				};
-			};
-
-			partition@200000 {
-				reg = <0x200000 0x600000>;
-				label = "kernel";
-			};
-
-			partition@800000 {
-				reg = <0x800000 0x1800000>;
-				label = "rootfs";
-			};
-
-			partition@2000000 {
-				reg = <0x2000000 0x600000>;
-				label = "kn2";
-				read-only;
-			};
-
-			partition@2600000 {
-				reg = <0x2600000 0x1800000>;
-				label = "rfs2";
-				read-only;
-			};
-
-			partition@3e00000 {
-				reg = <0x3e00000 0x1200000>;
-				label = "part1";
-				read-only;
-			};
-
-			partition@5000000 {
-				reg = <0x5000000 0x1200000>;
-				label = "part2";
-				read-only;
-			};
-
-			partition@6200000 {
-				reg = <0x6200000 0x1e00000>;
-				label = "config";
-				read-only;
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-linksys-venom.dts

@@ -1,213 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <[email protected]>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT32X";
-	compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
-		     "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-		append-rootblock = "root=/dev/mtdblock";
-	};
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "venom:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_blue@1 {
-		label = "venom:blue:wan";
-		reg = <0x1>;
-	};
-
-	usb2@5 {
-		label = "venom:blue:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "venom:blue:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "venom:blue:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_blue@8 {
-		label = "venom:blue:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "venom:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	power {
-		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		label = "venom:blue:power";
-	};
-
-	sata {
-		gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		label = "venom:blue:sata";
-	};
-
-	wlan_2g {
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		label = "venom:blue:wlan_2g";
-	};
-
-	wlan_5g {
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		label = "venom:blue:wlan_5g";
-	};
-};
-
-&gpio_leds_pins {
-	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-	/* Spansion S34ML02G2 256MiB, OEM Layout */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;	/* 2MB */
-			read-only;
-		};
-
-		partition@200000 {
-			label = "u_env";
-			reg = <0x200000 0x20000>;	/* 128KB */
-		};
-
-		partition@220000 {
-			label = "s_env";
-			reg = <0x220000 0x40000>;	/* 256KB */
-		};
-
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x260000 0x5c0000>;	/* 5.75MB */
-		};
-
-		partition@7e0000 {
-			label = "devinfo";
-			reg = <0x7e0000 0x40000>;	/* 256KB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@900000 {
-			label = "kernel1";
-			reg = <0x900000 0x7b00000>;	/* 123MB */
-		};
-
-		partition@f00000 {
-			label = "rootfs1";
-			reg = <0xf00000 0x7500000>;	/* 117MB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@8400000 {
-			label = "kernel2";
-			reg = <0x8400000 0x7b00000>;	/* 123MB */
-		};
-
-		partition@8a00000 {
-			label = "rootfs2";
-			reg = <0x8a00000 0x7500000>;	/* 117MB */
-		};
-
-		/* last MB is for the BBT, not writable */
-		partition@ff00000 {
-			label = "BBT";
-			reg = <0xff00000 0x100000>;
-		};
-	};
-};
-
-
-&pcie1 {
-	mwlwifi {
-		marvell,chainmask = <4 4>;
-	};
-};
-
-&pcie2 {
-	mwlwifi {
-		marvell,chainmask = <4 4>;
-	};
-};
-
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhci_pins>;
-	no-1-8-v;
-	non-removable;
-	wp-inverted;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&usb3_1_vbus {
-	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-	marvell,pins = "mpp44";
-};

target/linux/mvebu/files-6.1/arch/arm/boot/dts/armada-385-nas1dual.dts

@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
-/*
- * Device Tree file for ipTIME NAS1dual
- *
- * Copyright (C) 2020 Sungbo Eo <[email protected]>
- *
- * Based on armada-385-linksys.dtsi
- * Copyright (C) 2015 Imre Kaloz <[email protected]>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "ipTIME NAS1dual";
-	compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380";
-
-	aliases {
-		led-boot = &led_ready;
-		led-failsafe = &led_ready;
-		led-running = &led_ready;
-		led-upgrade = &led_ready;
-		label-mac-device = &eth0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-		          MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-		          MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-		          MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-		          MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
-
-		power {
-			label = "Power Button";
-			linux,input-type = <EV_SW>;
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-
-		copy {
-			label = "USB Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_leds_pins>;
-
-		led_ready: ready {
-			label = "blue:ready";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd {
-			label = "blue:hdd";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		usb {
-			function = LED_FUNCTION_USB;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb3_0_port1 &usb3_0_port2>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-	gpio-fan {
-		compatible = "gpio-fan";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_fan_pins>;
-		gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>,
-		        <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		/* We don't know the exact rpm, just use dummy values here. */
-		gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
-		#cooling-cells = <2>;
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&pca9536 1 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sata_power_pins>;
-
-		reg_sata_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "sata-power";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
-	};
-};
-
-&ahci0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	sata-port@0 {
-		reg = <0>;
-		target-supply = <&reg_sata_power>;
-		#thermal-sensor-cells = <0>;
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	status = "okay";
-	phy-handle = <&ethphy1>;
-	phy-connection-type = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	nvmem-cells = <&macaddr_uboot_fffa8>;
-	nvmem-cell-names = "mac-address";
-};
-
-&eth1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	bm,pool-short = <3>;
-	nvmem-cells = <&macaddr_uboot_fffa8>;
-	nvmem-cell-names = "mac-address";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	pca9536: gpio@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "power-led", "power-board";
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-
-	/* LED1: On - Link, Blink - Activity, Off - No Link */
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-		marvell,reg-init = <3 16 0 0x1017>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-		marvell,reg-init = <3 16 0 0x1017>;
-	};
-};
-
-&pinctrl {
-	gpio_keys_pins: gpio-keys-pins {
-		marvell,pins = "mpp24", "mpp26", "mpp48";
-		marvell,function = "gpio";
-	};
-
-	gpio_leds_pins: gpio-leds-pins {
-		marvell,pins = "mpp18", "mpp20", "mpp51";
-		marvell,function = "gpio";
-	};
-
-	gpio_fan_pins: gpio-fan-pins {
-		marvell,pins = "mpp25", "mpp50";
-		marvell,function = "gpio";
-	};
-
-	sata_power_pins: sata-power-pins {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-
-	uart1_pins_alt: uart-pins-1-alt {
-		marvell,pins = "mpp45", "mpp46";
-		marvell,function = "ua1";
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x00000000 0x00100000>;
-				label = "u-boot";
-				read-only;
-
-				nvmem-layout {
-					compatible = "fixed-layout";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_uboot_fffa8: macaddr@fffa8 {
-						reg = <0xfffa8 0x6>;
-					};
-				};
-			};
-
-			partition@100000 {
-				reg = <0x00100000 0x03ec0000>;
-				label = "firmware";
-
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					reg = <0x00000000 0x00600000>;
-					label = "kernel";
-				};
-
-				partition@600000 {
-					reg = <0x00600000 0x038c0000>;
-					label = "rootfs";
-				};
-			};
-
-			partition@3fc0000 {
-				reg = <0x03fc0000 0x00040000>;
-				label = "config";
-				read-only;
-			};
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_alt>;
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	usb3_0_port1: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-
-	usb3_0_port2: port@2 {
-		reg = <2>;
-		#trigger-source-cells = <0>;
-	};
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts

@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
-	model = "Methode eDPU Board";
-	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
-};
-
-/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of
- * 2500Base-X since until 5.15 support for mvebu is available trying to
- * use 2500Base-X will cause buffer overruns for which the fix is not
- * easily backportable.
- */
-&eth0 {
-	phy-mode = "1000base-x";
-};
-
-/*
- * External MV88E6361 switch is only available on v2 of the board.
- * U-Boot will enable the MDIO bus and switch nodes.
- */
-&mdio {
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&smi_pins>;
-
-	/* Actual device is MV88E6361 */
-	switch: switch@0 {
-		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "cpu";
-				phy-mode = "2500base-x";
-				managed = "in-band-status";
-				ethernet = <&eth0>;
-			};
-
-			port@9 {
-				reg = <9>;
-				label = "downlink";
-				phy-mode = "2500base-x";
-				managed = "in-band-status";
-			};
-
-			port@a {
-				reg = <10>;
-				label = "uplink";
-				phy-mode = "2500base-x";
-				managed = "in-band-status";
-				sfp = <&sfp_eth1>;
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts

@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for ESPRESSObin-Ultra
- * Copyright (C) 2019 Globalscale technologies, Inc.
- *
- * Jason Hung <[email protected]>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
-	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
-	compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
-		     "marvell,armada3710";
-
-	aliases {
-		/* for dsa slave device */
-		ethernet1 = &switch0port1;
-		ethernet2 = &switch0port2;
-		ethernet3 = &switch0port3;
-		ethernet4 = &switch0port4;
-		ethernet5 = &switch0port5;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	reg_usb3_vbus: usb3-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb3-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
-	};
-
-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_usb3_vbus>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		compatible = "gpio-leds";
-		/* No assigned functions to the LEDs by default */
-		led1 {
-			label = "ebin-ultra:blue:led1";
-			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-		};
-		led2 {
-			label = "ebin-ultra:green:led2";
-			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-		};
-		led3 {
-			label = "ebin-ultra:red:led3";
-			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-		};
-		led4 {
-			label = "ebin-ultra:yellow:led4";
-			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sdhci0 {
-	status = "okay";
-	non-removable;
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,pad-type = "fixed-1-8v";
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x3e0000>;
-			};
-			partition@3e0000 {
-				label = "hw-info";
-				reg = <0x3e0000 0x10000>;
-				read-only;
-			};
-			partition@3f0000 {
-				label = "u-boot-env";
-				reg = <0x3f0000 0x10000>;
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <100000>;
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&usb3 {
-	status = "okay";
-	usb-phy = <&usb3_phy>;
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii-id";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	extphy: ethernet-phy@0 {
-		reg = <1>;
-	};
-
-	switch0: switch0@1 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <3>;
-
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0port0: port@0 {
-				reg = <0>;
-				ethernet = <&eth0>;
-			};
-
-			switch0port1: port@1 {
-				reg = <1>;
-				label = "lan0";
-				phy-handle = <&switch0phy1>;
-			};
-
-			switch0port2: port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-handle = <&switch0phy2>;
-			};
-
-			switch0port3: port@3 {
-				reg = <3>;
-				label = "lan2";
-				phy-handle = <&switch0phy3>;
-			};
-
-			switch0port4: port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-handle = <&switch0phy4>;
-			};
-
-			switch0port5: port@5 {
-				reg = <5>;
-				label = "wan";
-				phy-handle = <&extphy>;
-				phy-mode = "sgmii";
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy1: switch0phy1@11 {
-				reg = <0x11>;
-			};
-			switch0phy2: switch0phy2@12 {
-				reg = <0x12>;
-			};
-			switch0phy3: switch0phy3@13 {
-				reg = <0x13>;
-			};
-			switch0phy4: switch0phy4@14 {
-				reg = <0x14>;
-			};
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

@@ -1,250 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-372x.dtsi"
-
-/ {
-	model = "GL.iNet GL-MV1000";
-	compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	vcc_sd_reg1: regulator {
-		compatible = "regulator-gpio";
-		regulator-name = "vcc_sd1";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-
-		gpios-states = <0>;
-		states = <1800000 0x1
-			3300000 0x0>;
-		enable-active-high;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-		};
-
-		switch {
-			label = "switch";
-			linux,code = <BTN_0>;
-			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		vpn {
-			label = "green:vpn";
-			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			function = LED_FUNCTION_WAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power: power {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0 0xf0000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "u-boot-env";
-				reg = <0xf0000 0x8000>;
-				read-only;
-			};
-
-			factory: partition@f8000 {
-				label = "factory";
-				reg = <0xf8000 0x8000>;
-				read-only;
-
-				nvmem-layout {
-					compatible = "fixed-layout";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					macaddr_factory_0: macaddr@0 {
-						reg = <0x0 0x6>;
-					};
-
-					macaddr_factory_6: macaddr@6 {
-						reg = <0x6 0x6>;
-					};
-				};
-			};
-
-			partition@100000 {
-				label = "gl-firmware-dtb";
-				reg = <0x100000 0x10000>;
-				read-only;
-			};
-
-			partition@110000 {
-				label = "gl-firmware";
-				reg = <0x110000 0xef0000>;
-				read-only;
-			};
-
-			partition@ef0000 {
-				label = "gl-firmware-jffs2";
-				reg = <0xef0000 0x110000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&sdhci1 {
-	wp-inverted;
-	bus-width = <4>;
-	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
-	marvell,pad-type = "sd";
-	no-1-8-v;
-	vqmmc-supply = <&vcc_sd_reg1>;
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	marvell,pad-type = "fixed-1-8v";
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&mdio {
-	switch0: switch0@1 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-
-		dsa,member = <0 0>;
-
-		ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				ethernet = <&eth0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "wan";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan0";
-				phy-handle = <&switch0phy1>;
-
-				nvmem-cells = <&macaddr_factory_6>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-				phy-handle = <&switch0phy2>;
-
-				nvmem-cells = <&macaddr_factory_6>;
-				nvmem-cell-names = "mac-address";
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@11 {
-				reg = <0x11>;
-			};
-			switch0phy1: switch0phy1@12 {
-				reg = <0x12>;
-			};
-			switch0phy2: switch0phy2@13 {
-				reg = <0x13>;
-			};
-		};
-	};
-};
-
-&eth0 {
-	nvmem-cells = <&macaddr_factory_0>;
-	nvmem-cell-names = "mac-address";
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts

@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "armada-3720-uDPU.dtsi"
-
-/ {
-	model = "Methode uDPU Board";
-	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
-
-	sfp_eth0: sfp-eth0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
-		maximum-power-milliwatt = <3000>;
-	};
-};
-
-&pinctrl_nb {
-	i2c1_recovery_pins: i2c1-recovery-pins {
-		groups = "i2c1";
-		function = "gpio";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-1 = <&i2c1_recovery_pins>;
-	/delete-property/mrvl,i2c-fast-mode;
-	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&eth0 {
-	phy-mode = "2500base-x";
-	sfp = <&sfp_eth0>;
-};
-
-&eth1 {
-	phy-mode = "2500base-x";
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi

@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <[email protected]>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	aliases {
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power1 {
-			label = "udpu:green:power";
-			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-		};
-
-		led-power2 {
-			label = "udpu:red:power";
-			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-network1 {
-			label = "udpu:green:network";
-			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-network2 {
-			label = "udpu:red:network";
-			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-		};
-
-		led-alarm1 {
-			label = "udpu:green:alarm";
-			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
-		};
-
-		led-alarm2 {
-			label = "udpu:red:alarm";
-			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sfp_eth1: sfp-eth1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-		maximum-power-milliwatt = <3000>;
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,pad-type = "fixed-1-8v";
-	non-removable;
-	no-sd;
-	no-sdio;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x10000>;
-			};
-		};
-	};
-};
-
-&pinctrl_nb {
-	i2c2_recovery_pins: i2c2-recovery-pins {
-		groups = "i2c2";
-		function = "gpio";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-1 = <&i2c2_recovery_pins>;
-	/delete-property/mrvl,i2c-fast-mode;
-	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	temp-sensor@48 {
-		compatible = "ti,tmp75c";
-		reg = <0x48>;
-	};
-
-	temp-sensor@49 {
-		compatible = "ti,tmp75c";
-		reg = <0x49>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	managed = "in-band-status";
-	phys = <&comphy1 0>;
-};
-
-&eth1 {
-	phy-mode = "sgmii";
-	status = "okay";
-	managed = "in-band-status";
-	phys = <&comphy0 1>;
-	sfp = <&sfp_eth1>;
-};
-
-&usb3 {
-	status = "okay";
-	phys = <&usb2_utmi_otg_phy>;
-	phy-names = "usb2-utmi-otg-phy";
-};
-
-&uart0 {
-	status = "okay";
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts

@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree file for Globalscale MOCHAbin
- * Copyright (C) 2019 Globalscale technologies, Inc.
- * Copyright (C) 2021 Sartura Ltd.
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-7040.dtsi"
-
-/ {
-	model = "Globalscale MOCHAbin";
-	compatible = "globalscale,mochabin", "marvell,armada7040",
-		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		ethernet0 = &cp0_eth0;
-		ethernet1 = &cp0_eth1;
-		ethernet2 = &cp0_eth2;
-		ethernet3 = &swport1;
-		ethernet4 = &swport2;
-		ethernet5 = &swport3;
-		ethernet6 = &swport4;
-	};
-
-	/* SFP+ 10G */
-	sfp_eth0: sfp-eth0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&cp0_i2c1>;
-		los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	/* SFP 1G */
-	sfp_eth2: sfp-eth2 {
-		compatible = "sff,sfp";
-		i2c-bus = <&cp0_i2c0>;
-		los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* microUSB UART console */
-&uart0 {
-	status = "okay";
-
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-/* eMMC */
-&ap_sdhci0 {
-	status = "okay";
-
-	bus-width = <4>;
-	non-removable;
-	/delete-property/ marvell,xenon-phy-slow-mode;
-	no-1-8-v;
-};
-
-&cp0_pinctrl {
-	cp0_uart0_pins: cp0-uart0-pins {
-		marvell,pins = "mpp6", "mpp7";
-		marvell,function = "uart0";
-	};
-
-	cp0_spi0_pins: cp0-spi0-pins {
-		marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
-		marvell,function = "spi0";
-	};
-
-	cp0_spi1_pins: cp0-spi1-pins {
-		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
-		marvell,function = "spi1";
-	};
-
-	cp0_i2c0_pins: cp0-i2c0-pins {
-		marvell,pins = "mpp37", "mpp38";
-		marvell,function = "i2c0";
-	};
-
-	cp0_i2c1_pins: cp0-i2c1-pins {
-		marvell,pins = "mpp2", "mpp3";
-		marvell,function = "i2c1";
-	};
-
-	pca9554_int_pins: pca9554-int-pins {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	cp0_rgmii1_pins: cp0-rgmii1-pins {
-		marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
-			       "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
-		marvell,function = "ge1";
-	};
-
-	is31_sdb_pins: is31-sdb-pins {
-		marvell,pins = "mpp30";
-		marvell,function = "gpio";
-	};
-
-	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
-		marvell,pins = "mpp9";
-		marvell,function = "gpio";
-	};
-
-	cp0_switch_pins: cp0-switch-pins {
-		marvell,pins = "mpp0", "mpp1";
-		marvell,function = "gpio";
-	};
-
-	cp0_phy_pins: cp0-phy-pins {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-};
-
-/* mikroBUS UART */
-&cp0_uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_uart0_pins>;
-};
-
-/* mikroBUS SPI */
-&cp0_spi0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
-};
-
-/* SPI-NOR */
-&cp0_spi1{
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi1_pins>;
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x3e0000>;
-				read-only;
-			};
-
-			partition@3e0000 {
-				label = "hw-info";
-				reg = <0x3e0000 0x10000>;
-				read-only;
-			};
-
-			partition@3f0000 {
-				label = "u-boot-env";
-				reg = <0x3f0000 0x10000>;
-			};
-		};
-	};
-};
-
-/* mikroBUS, 1G SFP and GPIO expander */
-&cp0_i2c0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-	clock-frequency = <100000>;
-
-	sfp_gpio: pca9554@39 {
-		compatible = "nxp,pca9554";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pca9554_int_pins>;
-		reg = <0x39>;
-
-		interrupt-parent = <&cp0_gpio1>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		/*
-		 * IO0_0: SFP+_TX_FAULT
-		 * IO0_1: SFP+_TX_DISABLE
-		 * IO0_2: SFP+_PRSNT
-		 * IO0_3: SFP+_LOSS
-		 * IO0_4: SFP_TX_FAULT
-		 * IO0_5: SFP_TX_DISABLE
-		 * IO0_6: SFP_PRSNT
-		 * IO0_7: SFP_LOSS
-		 */
-	};
-};
-
-/* IS31FL3199, mini-PCIe and 10G SFP+ */
-&cp0_i2c1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c1_pins>;
-	clock-frequency = <100000>;
-
-	leds@64 {
-		compatible = "issi,is31fl3199";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&is31_sdb_pins>;
-		shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
-		reg = <0x64>;
-
-		led1_red: led@1 {
-			label = "red:led1";
-			reg = <1>;
-			led-max-microamp = <20000>;
-		};
-
-		led1_green: led@2 {
-			label = "green:led1";
-			reg = <2>;
-		};
-
-		led1_blue: led@3 {
-			label = "blue:led1";
-			reg = <3>;
-		};
-
-		led2_red: led@4 {
-			label = "red:led2";
-			reg = <4>;
-		};
-
-		led2_green: led@5 {
-			label = "green:led2";
-			reg = <5>;
-		};
-
-		led2_blue: led@6 {
-			label = "blue:led2";
-			reg = <6>;
-		};
-
-		led3_red: led@7 {
-			label = "red:led3";
-			reg = <7>;
-		};
-
-		led3_green: led@8 {
-			label = "green:led3";
-			reg = <8>;
-		};
-
-		led3_blue: led@9 {
-			label = "blue:led3";
-			reg = <9>;
-		};
-	};
-};
-
-&cp0_mdio {
-	status = "okay";
-
-	/* 88E1512 PHY */
-	eth2phy: ethernet-phy@1 {
-		reg = <1>;
-		sfp = <&sfp_eth2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_phy_pins>;
-		reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
-	};
-
-	/* 88E6141 Topaz switch */
-	switch: switch@3 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_switch_pins>;
-		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
-
-		interrupt-parent = <&cp0_gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			swport1: port@1 {
-				reg = <1>;
-				label = "lan0";
-				phy-handle = <&swphy1>;
-			};
-
-			swport2: port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-handle = <&swphy2>;
-			};
-
-			swport3: port@3 {
-				reg = <3>;
-				label = "lan2";
-				phy-handle = <&swphy3>;
-			};
-
-			swport4: port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-handle = <&swphy4>;
-			};
-
-			port@5 {
-				reg = <5>;
-				ethernet = <&cp0_eth1>;
-				phy-mode = "2500base-x";
-				managed = "in-band-status";
-			};
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			swphy1: swphy1@17 {
-				reg = <17>;
-			};
-
-			swphy2: swphy2@18 {
-				reg = <18>;
-			};
-
-			swphy3: swphy3@19 {
-				reg = <19>;
-			};
-
-			swphy4: swphy4@20 {
-				reg = <20>;
-			};
-		};
-	};
-};
-
-&cp0_ethernet {
-	status = "okay";
-};
-
-/* 10G SFP+ */
-&cp0_eth0 {
-	status = "okay";
-
-	phy-mode = "10gbase-r";
-	phys = <&cp0_comphy4 0>;
-	managed = "in-band-status";
-	sfp = <&sfp_eth0>;
-};
-
-/* Topaz switch uplink */
-&cp0_eth1 {
-	status = "okay";
-
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy0 1>;
-
-	fixed-link {
-		speed = <2500>;
-		full-duplex;
-	};
-};
-
-/* 1G SFP or 1G RJ45 */
-&cp0_eth2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_rgmii1_pins>;
-
-	phy = <&eth2phy>;
-	phy-mode = "rgmii-id";
-};
-
-/* SMSC USB5434B hub */
-&cp0_usb3_0 {
-	status = "okay";
-
-	phys = <&cp0_comphy1 0>;
-	phy-names = "cp0-usb3h0-comphy";
-};
-
-/* miniPCI-E USB */
-&cp0_usb3_1 {
-	status = "okay";
-};
-
-&cp0_sata0 {
-	status = "okay";
-
-	/* 7 + 12 SATA connector (J24) */
-	sata-port@0 {
-		phys = <&cp0_comphy2 0>;
-		phy-names = "cp0-sata0-0-phy";
-	};
-
-	/* M.2-2250 B-key (J39) */
-	sata-port@1 {
-		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
-	};
-};
-
-/* miniPCI-E (J5) */
-&cp0_pcie2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_pcie_reset_pins>;
-	phys = <&cp0_comphy5 2>;
-	phy-names = "cp0-pcie2-x1-phy";
-	reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
-	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts

@@ -1,513 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright SolidRun Ltd.
- * Copyright (C) 2024 Tobias Schramm <[email protected]>
- *
- * Device tree for the CN9130-based ClearFog Pro
- */
-
-#include "cn9130.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SolidRun ClearFog Pro";
-	compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad",
-		     "marvell,armada-ap807";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		gpio1 = &cp0_gpio1;
-		gpio2 = &cp0_gpio2;
-		i2c0 = &cp0_i2c0;
-		ethernet0 = &cp0_eth0;
-		ethernet1 = &cp0_eth1;
-		ethernet2 = &cp0_eth2;
-		spi1 = &cp0_spi1;
-	};
-
-	memory@00000000 {
-		reg = <0x0 0x0 0x1 0x0>;
-		device_type = "memory";
-	};
-
-	/* Virtual regulator, root of power tree */
-	vin: regulator-vin {
-		compatible = "regulator-fixed";
-		regulator-name = "vin";
-		regulator-always-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	/* Regulators supplied by vin */
-	v_5v0: regulator-v_5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "v_5v0";
-		regulator-always-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vin>;
-	};
-
-	v_3v3: regulator-v_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "v_3v3";
-		regulator-always-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vin>;
-	};
-
-	/* Regulators supplied by v_5v0 */
-	v_1v8: regulator-v_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "v_1v8";
-		regulator-always-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&v_5v0>;
-	};
-
-	v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "v_5v0_usb3_hst_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
-		vin-supply = <&v_5v0>;
-	};
-
-	/* Regulators internal to SOM */
-	vqmmc: regulator-vqmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vqmmc";
-		regulator-always-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&v_5v0>;
-	};
-
-	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
-		compatible = "usb-nop-xceiv";
-		vbus-supply = <&v_5v0_usb3_hst_vbus>;
-	};
-
-	cp0_sfp_eth0: sfp-eth@0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&cp0_i2c1>;
-		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-		maximum-power-milliwatt = <2000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_button_pin>;
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/* on-board eMMC  */
-&ap_sdhci0 {
-	bus-width = <8>;
-	pinctrl-names = "default";
-	vqmmc-supply = <&vqmmc>;
-	status = "okay";
-};
-
-&cp0_crypto {
-	status = "okay";
-};
-
-&cp0_ethernet {
-	status = "okay";
-};
-
-&cp0_gpio1 {
-	status = "okay";
-};
-
-&cp0_gpio2 {
-	status = "okay";
-};
-
-&cp0_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-	clock-frequency = <100000>;
-
-	/*
-	 * PCA9655 GPIO expander, up to 1MHz clock.
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-CON2 PERST#
-	 *  3-CON3 W_DISABLE
-	 *  4-CON2 CLKREQ#
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-CON2 W_DISABLE
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	expander0: gpio-expander@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&cp0_gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_expander0_pins>;
-		vcc-supply = <&v_3v3>;
-
-		pcie1_0_clkreq {
-			gpio-hog;
-			gpios = <0 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "pcie1.0-clkreq";
-		};
-
-		pcie1_0_w_disable {
-			gpio-hog;
-			gpios = <3 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "pcie1.0-w-disable";
-		};
-
-		pcie2_0_clkreq {
-			gpio-hog;
-			gpios = <4 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "pcie2.0-clkreq";
-		};
-
-		pcie2_0_w_disable {
-			gpio-hog;
-			gpios = <7 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "pcie2.0-w-disable";
-		};
-
-		usb3_ilimit {
-			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "usb3-current-limit";
-		};
-
-		m2_devslp {
-			gpio-hog;
-			gpios = <11 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "m.2 devslp";
-		};
-	};
-
-	/* ADC only for mikroBUS connector */
-	mcp3021@4c {
-		compatible = "microchip,mcp3021";
-		reg = <0x4c>;
-	};
-
-	/* EEPROM on the SOM */
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-		read-only;
-
-		nvmem-layout {
-			compatible = "onie,tlv-layout";
-
-			onie_tlv_macaddr: mac-address {
-				#nvmem-cell-cells = <1>;
-			};
-		};
-	};
-};
-
-/* SMBUS on mini PCIe sockets */
-&cp0_i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c1_pins>;
-	clock-frequency = <100000>;
-};
-
-&cp0_mdio {
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		/* Green led blinks on activity, orange LED on link */
-		marvell,reg-init = <3 16 0 0x0064>;
-	};
-
-	switch@4 {
-		compatible = "marvell,mv88e6085";
-		reg = <4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&cp0_gpio1>;
-		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_dsa0_pins>;
-		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
-
-		mdio-external {
-			compatible = "marvell,mv88e6xxx-mdio-external";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 88E1512 PHY */
-			port6_phy: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				ethernet = <&cp0_eth1>;
-				label = "cpu";
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				phy-handle = <&port6_phy>;
-				phy-mode = "rgmii-id";
-			};
-		};
-	};
-};
-
-/* SRDS #0 - SATA on bottom M.2 B-Key connector */
-&cp0_sata0 {
-	status = "okay";
-
-	sata-port@0 {
-		status = "disabled";
-	};
-
-	sata-port@1 {
-		phys = <&cp0_comphy0 1>;
-		target-supply = <&v_3v3>;
-	};
-};
-
-&cp0_utmi {
-	status = "okay";
-};
-
-/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */
-&cp0_usb3_0 {
-	status = "okay";
-	phys = <&cp0_utmi0>;
-	phy-names = "utmi";
-	dr_mode = "host";
-};
-
-/* SRDS #1 - USB-A 3.0 host port */
-&cp0_usb3_1 {
-	status = "okay";
-	phys = <&cp0_utmi1>, <&cp0_comphy1 0>;
-	phy-names = "utmi", "usb";
-	usb-phy = <&cp0_usb3_0_phy1>;
-	dr_mode = "host";
-};
-
-/* SRDS #2 - SFP+ 10GE */
-&cp0_eth0 {
-	status = "okay";
-	phy-mode = "10gbase-r";
-	phys = <&cp0_comphy2 0>;
-	managed = "in-band-status";
-	nvmem-cells = <&onie_tlv_macaddr 0>;
-	nvmem-cell-names = "mac-address";
-	sfp = <&cp0_sfp_eth0>;
-};
-
-/* SRDS #3 - SGMII 1GE to L2 switch */
-&cp0_eth1 {
-	status = "okay";
-	phys = <&cp0_comphy3 1>;
-	phy-mode = "sgmii";
-	nvmem-cells = <&onie_tlv_macaddr 1>;
-	nvmem-cell-names = "mac-address";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* SRDS #4 - mini PCIe slot near SOM */
-&cp0_pcie1 {
-	status = "okay";
-	phys = <&cp0_comphy4 1>;
-	num-lanes = <1>;
-	reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-};
-
-/* SRDS #5 - mini PCIe slot far from SOM */
-&cp0_pcie2 {
-	status = "okay";
-	phys = <&cp0_comphy5 2>;
-	num-lanes = <1>;
-	reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-};
-
-/* GE PHY RGMII */
-&cp0_eth2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_ge2_rgmii_pins>;
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-	nvmem-cells = <&onie_tlv_macaddr 2>;
-	nvmem-cell-names = "mac-address";
-};
-
-/* micro SD card slot */
-&cp0_sdhci0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>;
-	bus-width = <4>;
-	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	vqmmc-supply = <&v_3v3>;
-	vmmc-supply = <&v_3v3>;
-};
-
-&cp0_spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi1_pins>;
-
-	spi-flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&cp0_syscon0 {
-	cp0_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-
-		cp0_i2c0_pins: cp0-i2c0-pins {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-
-		cp0_i2c1_pins: cp0-i2c1-pins {
-			marvell,pins = "mpp35", "mpp36";
-			marvell,function = "i2c1";
-		};
-
-		cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins {
-			marvell,pins = "mpp44", "mpp45", "mpp46",
-				       "mpp47", "mpp48", "mpp49",
-				       "mpp50", "mpp51", "mpp52",
-				       "mpp53", "mpp54", "mpp55";
-			marvell,function = "ge1";
-		};
-
-		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins {
-			marvell,pins = "mpp43";
-			marvell,function = "sdio";
-		};
-
-		cp0_sdhci_pins: cp0-sdhci-pins {
-			marvell,pins = "mpp56", "mpp57", "mpp58",
-				       "mpp59", "mpp60", "mpp61";
-			marvell,function = "sdio";
-		};
-
-		cp0_spi1_pins: cp0-spi1-pins {
-			marvell,pins = "mpp12", "mpp13", "mpp14",
-				       "mpp15", "mpp16";
-			marvell,function = "spi1";
-		};
-
-		cp0_dsa0_pins: cp0-dsa0-pins {
-			marvell,pins = "mpp27", "mpp29";
-			marvell,function = "gpio";
-		};
-
-		cp0_button_pin: cp0-button-pin {
-			marvell,pins = "mpp32";
-			marvell,function = "gpio";
-		};
-
-		cp0_expander0_pins: cp0-expander0-pins {
-			marvell,pins = "mpp4";
-			marvell,function = "gpio";
-		};
-	};
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts

@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9131-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "iEi Puzzle-M901";
-	compatible = "iei,puzzle-m901",
-		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		i2c0 = &cp1_i2c0;
-		i2c1 = &cp0_i2c0;
-		ethernet0 = &cp0_eth0;
-		ethernet1 = &cp0_eth1;
-		ethernet2 = &cp0_eth2;
-		ethernet3 = &cp1_eth0;
-		ethernet4 = &cp1_eth1;
-		ethernet5 = &cp1_eth2;
-		gpio1 = &cp0_gpio1;
-		gpio2 = &cp0_gpio2;
-		gpio3 = &cp1_gpio1;
-		gpio4 = &cp1_gpio2;
-		led-boot = &led_power;
-		led-failsafe = &led_info;
-		led-running = &led_power;
-		led-upgrade = &led_info;
-	};
-
-	memory@00000000 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&cp0_uart0 {
-	status = "okay";
-
-	puzzle-mcu {
-		compatible = "iei,wt61p803-puzzle";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		current-speed = <115200>;
-		enable-beep;
-		status = "okay";
-
-		leds {
-			compatible = "iei,wt61p803-puzzle-leds";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "okay";
-
-			led@0 {
-				reg = <0>;
-				label = "white:network";
-				active-low;
-			};
-
-			led@1 {
-				reg = <1>;
-				label = "green:cloud";
-				active-low;
-			};
-
-			led_info: led@2 {
-				reg = <2>;
-				label = "orange:info";
-				active-low;
-			};
-
-			led_power: led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_POWER;
-				color = <LED_COLOR_ID_YELLOW>;
-				active-low;
-				default-state = "on";
-			};
-		};
-
-		hwmon {
-			compatible = "iei,wt61p803-puzzle-hwmon";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			chassis_fan_group0: fan-group@0 {
-				#cooling-cells = <2>;
-				reg = <0x00>;
-				cooling-levels = <0 159 195 211 223 241 255>;
-			};
-		};
-	};
-};
-
-&ap_thermal_ic {
-	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
-	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
-	pinctrl-names = "default";
-	bus-width = <8>;
-	status = "okay";
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
-	status = "okay";
-};
-
-&cp0_xmdio {
-	status = "okay";
-	cp0_nbaset_phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <2>;
-	};
-	cp0_nbaset_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <0>;
-	};
-	cp0_nbaset_phy2: ethernet-phy@2 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <8>;
-	};
-};
-
-&cp0_ethernet {
-	status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy2 0>;
-	phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy4 1>;
-	phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy5 2>;
-	phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
-	status = "okay";
-};
-
-&cp0_gpio2 {
-	status = "okay";
-};
-
-&cp0_i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-	rtc@32 {
-		compatible = "epson,rx8130";
-		reg = <0x32>;
-		wakeup-source;
-	};
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_pcie0 {
-	status = "okay";
-	num-lanes = <2>;
-	num-viewport = <8>;
-	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
-};
-
-/* U55 */
-&cp0_spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
-	reg = <0x700680 0x50>,          /* control */
-	      <0x2000000 0x1000000>;    /* CS0 */
-	status = "okay";
-	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-max-frequency = <40000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x1f0000>;
-			};
-			partition@1f0000 {
-				label = "U-Boot ENV Factory";
-				reg = <0x1f0000 0x10000>;
-			};
-			partition@200000 {
-				label = "Reserved";
-				reg = <0x200000 0x1f0000>;
-			};
-			partition@3f0000 {
-				label = "U-Boot ENV";
-				reg = <0x3f0000 0x10000>;
-			};
-		};
-	};
-};
-
-&cp0_rtc {
-	status = "disabled";
-};
-
-&cp0_syscon0 {
-	cp0_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-		cp0_i2c0_pins: cp0-i2c-pins-0 {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-		cp0_i2c1_pins: cp0-i2c-pins-1 {
-			marvell,pins = "mpp35", "mpp36";
-			marvell,function = "i2c1";
-		};
-		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
-			marvell,pins = "mpp0", "mpp1", "mpp2",
-				       "mpp3", "mpp4", "mpp5",
-				       "mpp6", "mpp7", "mpp8",
-				       "mpp9", "mpp10", "mpp11";
-			marvell,function = "ge0";
-		};
-		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
-			marvell,pins = "mpp44", "mpp45", "mpp46",
-				       "mpp47", "mpp48", "mpp49",
-				       "mpp50", "mpp51", "mpp52",
-				       "mpp53", "mpp54", "mpp55";
-			marvell,function = "ge1";
-		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
-			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
-			marvell,function = "spi1";
-		};
-	};
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME		cp1
-#define CP11X_BASE		f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE	f6600000
-#define CP11X_PCIE1_BASE	f6620000
-#define CP11X_PCIE2_BASE	f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
-	status = "okay";
-};
-
-&cp1_xmdio {
-	status = "okay";
-	cp1_nbaset_phy0: ethernet-phy@3 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <2>;
-	};
-	cp1_nbaset_phy1: ethernet-phy@4 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <0>;
-	};
-	cp1_nbaset_phy2: ethernet-phy@5 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <8>;
-	};
-};
-
-&cp1_ethernet {
-	status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp1_comphy2 0>;
-	phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp1_comphy4 1>;
-	phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp1_comphy5 2>;
-	phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_sata0 {
-	status = "okay";
-	sata-port@1 {
-		status = "okay";
-		phys = <&cp1_comphy0 1>;
-	};
-};
-
-&cp1_gpio1 {
-	status = "okay";
-};
-
-&cp1_gpio2 {
-	status = "okay";
-};
-
-&cp1_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp1_i2c0_pins>;
-	clock-frequency = <100000>;
-};
-
-&cp1_rtc {
-	status = "disabled";
-};
-
-&cp1_syscon0 {
-	cp1_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-		cp1_i2c0_pins: cp1-i2c-pins-0 {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-		cp1_spi0_pins: cp1-spi-pins-0 {
-			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
-			marvell,function = "spi1";
-		};
-		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
-			marvell,pins = "mpp3";
-			marvell,function = "gpio";
-		};
-		cp1_sfp_pins: sfp-pins {
-			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
-			marvell,function = "gpio";
-		};
-	};
-};
-
-&cp1_thermal_ic {
-	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-&cp1_usb3_1 {
-	status = "okay";
-	phys = <&cp1_comphy3 1>;
-	phy-names = "usb";
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts

@@ -1,580 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Copyright (C) 2019 Marvell International Ltd.
- *
- * Device tree for the CN9132-DB board.
- */
-
-#include "cn9130.dtsi"
-#include "puzzle-thermal.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "iEi Puzzle-M902";
-	compatible = "iei,puzzle-m902",
-		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		i2c0 = &cp1_i2c0;
-		i2c1 = &cp0_i2c0;
-		gpio1 = &cp0_gpio1;
-		gpio2 = &cp0_gpio2;
-		gpio3 = &cp1_gpio1;
-		gpio4 = &cp1_gpio2;
-		gpio5 = &cp2_gpio1;
-		gpio6 = &cp2_gpio2;
-		ethernet0 = &cp0_eth0;
-		ethernet1 = &cp0_eth1;
-		ethernet2 = &cp0_eth2;
-		ethernet3 = &cp1_eth0;
-		ethernet4 = &cp1_eth1;
-		ethernet5 = &cp1_eth2;
-		ethernet6 = &cp2_eth0;
-		ethernet7 = &cp2_eth1;
-		ethernet8 = &cp2_eth2;
-		spi1 = &cp0_spi0;
-		spi2 = &cp0_spi1;
-		led-boot = &led_power;
-		led-failsafe = &led_info;
-		led-running = &led_power;
-		led-upgrade = &led_info;
-	};
-
-	memory@00000000 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "cp2-xhci0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	cp2_usb3_0_phy0: cp2_usb3_phy0 {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cp2_reg_usb3_vbus0>;
-	};
-
-	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "cp2-xhci1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	cp2_usb3_0_phy1: cp2_usb3_phy1 {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cp2_reg_usb3_vbus1>;
-	};
-
-	cp2_sfp_eth0: sfp-eth0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&cp2_sfpp0_i2c>;
-		los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&cp0_uart0 {
-	status = "okay";
-
-	puzzle-mcu {
-		compatible = "iei,wt61p803-puzzle";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		current-speed = <115200>;
-		enable-beep;
-		status = "okay";
-
-		leds {
-			compatible = "iei,wt61p803-puzzle-leds";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "okay";
-
-			led@0 {
-				reg = <0>;
-				label = "white:network";
-				active-low;
-			};
-
-			led@1 {
-				reg = <1>;
-				label = "green:cloud";
-				active-low;
-			};
-
-			led_info: led@2 {
-				reg = <2>;
-				label = "orange:info";
-				active-low;
-			};
-
-			led_power: led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_POWER;
-				color = <LED_COLOR_ID_YELLOW>;
-				active-low;
-				default-state = "on";
-			};
-		};
-
-		hwmon {
-			compatible = "iei,wt61p803-puzzle-hwmon";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			chassis_fan_group0: fan-group@0 {
-				#cooling-cells = <2>;
-				reg = <0x00>;
-				cooling-levels = <0 159 195 211 223 241 255>;
-			};
-		};
-	};
-};
-
-&ap_thermal_ic {
-	PUZZLE_FAN_THERMAL(ic, &chassis_fan_group0);
-};
-
-&cp0_thermal_ic {
-	PUZZLE_FAN_THERMAL(cp0, &chassis_fan_group0);
-};
-
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
-	pinctrl-names = "default";
-	bus-width = <8>;
-	status = "okay";
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-};
-
-&cp0_crypto {
-	status = "okay";
-};
-
-&cp0_xmdio {
-	status = "okay";
-	cp0_nbaset_phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <2>;
-	};
-	cp0_nbaset_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <0>;
-	};
-	cp0_nbaset_phy2: ethernet-phy@2 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <8>;
-	};
-};
-
-&cp0_ethernet {
-	status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
-	status = "okay";
-	phy-mode = "10gbase-kr";
-	phys = <&cp0_comphy2 0>;
-	phy = <&cp0_nbaset_phy0>;
-};
-
-&cp0_eth1 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy4 1>;
-	phy = <&cp0_nbaset_phy1>;
-};
-
-&cp0_eth2 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp0_comphy1 2>;
-	phy = <&cp0_nbaset_phy2>;
-};
-
-&cp0_gpio1 {
-	status = "okay";
-};
-
-&cp0_gpio2 {
-	status = "okay";
-};
-
-&cp0_i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-	status = "okay";
-	clock-frequency = <100000>;
-	rtc@32 {
-		compatible = "epson,rx8130";
-		reg = <0x32>;
-		wakeup-source;
-	};
-};
-
-&cp0_i2c1 {
-	clock-frequency = <100000>;
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_sata0 {
-	status = "okay";
-	sata-port@1 {
-		status = "okay";
-		phys = <&cp0_comphy0 1>;
-	};
-};
-
-&cp0_pcie2 {
-	status = "okay";
-	num-lanes = <1>;
-	num-viewport = <8>;
-	phys = <&cp0_comphy5 2>;
-};
-
-/* U55 */
-&cp0_spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
-	reg = <0x700680 0x50>,          /* control */
-	      <0x2000000 0x1000000>;    /* CS0 */
-	status = "okay";
-	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-max-frequency = <40000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x1f0000>;
-			};
-			partition@1f0000 {
-				label = "U-Boot ENV Factory";
-				reg = <0x1f0000 0x10000>;
-			};
-			partition@200000 {
-				label = "Reserved";
-				reg = <0x200000 0x1f0000>;
-			};
-			partition@3f0000 {
-				label = "U-Boot ENV";
-				reg = <0x3f0000 0x10000>;
-			};
-		};
-	};
-};
-
-&cp0_rtc {
-	status = "disabled";
-};
-
-&cp0_syscon0 {
-	cp0_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-		cp0_i2c0_pins: cp0-i2c-pins-0 {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-		cp0_i2c1_pins: cp0-i2c-pins-1 {
-			marvell,pins = "mpp35", "mpp36";
-			marvell,function = "i2c1";
-		};
-		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
-			marvell,pins = "mpp0", "mpp1", "mpp2",
-				       "mpp3", "mpp4", "mpp5",
-				       "mpp6", "mpp7", "mpp8",
-				       "mpp9", "mpp10", "mpp11";
-			marvell,function = "ge0";
-		};
-		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
-			marvell,pins = "mpp44", "mpp45", "mpp46",
-				       "mpp47", "mpp48", "mpp49",
-				       "mpp50", "mpp51", "mpp52",
-				       "mpp53", "mpp54", "mpp55";
-			marvell,function = "ge1";
-		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
-			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
-			marvell,function = "spi1";
-		};
-	};
-};
-
-&cp0_usb3_1 {
-	status = "okay";
-	phys = <&cp0_comphy3 1>;
-	phy-names = "usb";
-};
-
-/*
- * Instantiate the first connected CP115
- */
-
-#define CP11X_NAME		cp1
-#define CP11X_BASE		f4000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE	f4600000
-#define CP11X_PCIE1_BASE	f4620000
-#define CP11X_PCIE2_BASE	f4640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
-	status = "okay";
-};
-
-&cp1_xmdio {
-	status = "okay";
-	cp1_nbaset_phy0: ethernet-phy@3 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <2>;
-	};
-	cp1_nbaset_phy1: ethernet-phy@4 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <0>;
-	};
-	cp1_nbaset_phy2: ethernet-phy@5 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <8>;
-	};
-};
-
-&cp1_ethernet {
-	status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
-	status = "okay";
-	phy-mode = "10gbase-kr";
-	phys = <&cp1_comphy2 0>;
-	phy = <&cp1_nbaset_phy0>;
-};
-
-&cp1_eth1 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp1_comphy4 1>;
-	phy = <&cp1_nbaset_phy1>;
-};
-
-&cp1_eth2 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp1_comphy1 2>;
-	phy = <&cp1_nbaset_phy2>;
-};
-
-&cp1_gpio1 {
-	status = "okay";
-};
-
-&cp1_gpio2 {
-	status = "okay";
-};
-
-&cp1_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp1_i2c0_pins>;
-	clock-frequency = <100000>;
-};
-
-&cp1_rtc {
-	status = "disabled";
-};
-
-&cp1_syscon0 {
-	cp1_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-		cp1_i2c0_pins: cp1-i2c-pins-0 {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-		cp1_spi0_pins: cp1-spi-pins-0 {
-			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
-			marvell,function = "spi1";
-		};
-		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
-			marvell,pins = "mpp3";
-			marvell,function = "gpio";
-		};
-	};
-};
-
-&cp1_thermal_ic {
-	PUZZLE_FAN_THERMAL(cp1, &chassis_fan_group0);
-};
-
-/*
- * Instantiate the second connected CP115
- */
-
-#define CP11X_NAME		cp2
-#define CP11X_BASE		f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE	f6600000
-#define CP11X_PCIE1_BASE	f6620000
-#define CP11X_PCIE2_BASE	f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp2_crypto {
-	status = "okay";
-};
-
-&cp2_ethernet {
-	status = "okay";
-};
-
-&cp2_xmdio {
-	status = "okay";
-	cp2_nbaset_phy0: ethernet-phy@6 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <2>;
-	};
-	cp2_nbaset_phy1: ethernet-phy@7 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <0>;
-	};
-	cp2_nbaset_phy2: ethernet-phy@8 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <8>;
-	};
-};
-
-/* SLM-1521-V2, CON9 */
-&cp2_eth0 {
-	status = "okay";
-	phy-mode = "10gbase-kr";
-	phys = <&cp2_comphy2 0>;
-	phy = <&cp2_nbaset_phy0>;
-};
-
-&cp2_eth1 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp2_comphy4 1>;
-	phy = <&cp2_nbaset_phy1>;
-};
-
-&cp2_eth2 {
-	status = "okay";
-	phy-mode = "2500base-x";
-	phys = <&cp2_comphy1 2>;
-	phy = <&cp2_nbaset_phy2>;
-};
-
-&cp2_gpio1 {
-	status = "okay";
-};
-
-&cp2_gpio2 {
-	status = "okay";
-};
-
-&cp2_i2c0 {
-	clock-frequency = <100000>;
-	/* SLM-1521-V2 - U3 */
-	i2c-mux@72 {
-		compatible = "nxp,pca9544";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x72>;
-		cp2_sfpp0_i2c: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			/* U12 */
-			cp2_module_expander1: pca9555@21 {
-				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x21>;
-			};
-		};
-	};
-};
-
-&cp2_rtc {
-	status = "disabled";
-};
-
-&cp2_syscon0 {
-	cp2_pinctrl: pinctrl {
-		compatible = "marvell,cp115-standalone-pinctrl";
-		cp2_i2c0_pins: cp2-i2c-pins-0 {
-			marvell,pins = "mpp37", "mpp38";
-			marvell,function = "i2c0";
-		};
-	};
-};
-
-&cp2_thermal_ic {
-	PUZZLE_FAN_THERMAL(cp2, &chassis_fan_group0);
-};

target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi

@@ -1,68 +0,0 @@
-#define PUZZLE_FAN_THERMAL(_cname, _fan)					\
-	polling-delay-passive = <500>;						\
-	polling-delay = <1000>;							\
-										\
-	trips {									\
-		cpu-hot {							\
-			temperature = <75000>;					\
-			hysteresis = <5000>;					\
-			type = "hot";						\
-		};								\
-		_cname##_active_full: cpu-active-full {				\
-			temperature = <70000>;					\
-			hysteresis = <5000>;					\
-			type = "active";					\
-		};								\
-		_cname##_active_high: cpu-active-high {				\
-			temperature = <65000>;					\
-			hysteresis = <5000>;					\
-			type = "active";					\
-		};								\
-		_cname##_active_med: cpu-active-med {				\
-			temperature = <62500>;					\
-			hysteresis = <3000>;					\
-			type = "active";					\
-		};								\
-		_cname##_active_low: cpu-active-low {				\
-			temperature = <60000>;					\
-			hysteresis = <3000>;					\
-			type = "active";					\
-		};								\
-		_cname##_active_min: cpu-active-min {				\
-			temperature = <55000>;					\
-			hysteresis = <5000>;					\
-			type = "active";					\
-		};								\
-		_cname##_active_idle: cpu-active-idle {				\
-			temperature = <50000>;					\
-			hysteresis = <5000>;					\
-			type = "active";					\
-		};								\
-	};									\
-	cooling-maps {								\
-		cpu-active-full {						\
-			trip = <&_cname##_active_full>;				\
-			cooling-device = <_fan THERMAL_NO_LIMIT			\
-					       THERMAL_NO_LIMIT>;		\
-		};								\
-		cpu-active-high {						\
-			trip = <&_cname##_active_high>;				\
-			cooling-device = <_fan 4 5>;				\
-		};								\
-		cpu-active-med {						\
-			trip = <&_cname##_active_med>;				\
-			cooling-device = <_fan 3 4>;				\
-		};								\
-		cpu-active-low {						\
-			trip = <&_cname##_active_low>;				\
-			cooling-device = <_fan 2 3>;				\
-		};								\
-		cpu-active-min {						\
-			trip = <&_cname##_active_min>;				\
-			cooling-device = <_fan 1 2>;				\
-		};								\
-		cpu-active-idle {						\
-			trip = <&_cname##_active_idle>;				\
-			cooling-device = <_fan 0 0>;				\
-		};								\
-	}

target/linux/mvebu/image/cortexa9.mk

@@ -3,9 +3,7 @@
 # Copyright (C) 2012-2016 OpenWrt.org
 # Copyright (C) 2016 LEDE-project.org
 
-ifneq ($(KERNEL),6.1)
 DTS_DIR := $(DTS_DIR)/marvell
-endif
 
 define Build/fortigate-header
   ( \

target/linux/mvebu/patches-6.1/000-cpufreq-armada-8k-add-ap807-support.patch

@@ -1,59 +0,0 @@
-From 8eec6e740b564ec5e1da59ab7070b89aa23c9973 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <[email protected]>
-Date: Fri, 16 Jun 2023 12:41:30 +0100
-Subject: [PATCH] cpufreq: armada-8k: add ap807 support
-
-Add support for the Armada AP807 die to armada-8k. This uses a
-different compatible for the CPU clock which needs to be added to
-the cpufreq driver.
-
-This commit takes a different approach to the WindRiver patch
-"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
-of_find_compatible_node() for each compatible, we use a table of
-IDs instead.
-
-Signed-off-by: Russell King (Oracle) <[email protected]>
-Signed-off-by: Viresh Kumar <[email protected]>
----
- drivers/cpufreq/armada-8k-cpufreq.c | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
---- a/drivers/cpufreq/armada-8k-cpufreq.c
-+++ b/drivers/cpufreq/armada-8k-cpufreq.c
-@@ -21,6 +21,13 @@
- #include <linux/pm_opp.h>
- #include <linux/slab.h>
- 
-+static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
-+	{ .compatible = "marvell,ap806-cpu-clock" },
-+	{ .compatible = "marvell,ap807-cpu-clock" },
-+	{ },
-+};
-+MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
-+
- /*
-  * Setup the opps list with the divider for the max frequency, that
-  * will be filled at runtime.
-@@ -127,7 +134,8 @@ static int __init armada_8k_cpufreq_init
- 	struct device_node *node;
- 	struct cpumask cpus;
- 
--	node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock");
-+	node = of_find_matching_node_and_match(NULL, armada_8k_cpufreq_of_match,
-+					       NULL);
- 	if (!node || !of_device_is_available(node)) {
- 		of_node_put(node);
- 		return -ENODEV;
-@@ -204,12 +212,6 @@ static void __exit armada_8k_cpufreq_exi
- }
- module_exit(armada_8k_cpufreq_exit);
- 
--static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = {
--	{ .compatible = "marvell,ap806-cpu-clock" },
--	{ },
--};
--MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match);
--
- MODULE_AUTHOR("Gregory Clement <[email protected]>");
- MODULE_DESCRIPTION("Armada 8K cpufreq driver");
- MODULE_LICENSE("GPL");

target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch

@@ -1,81 +0,0 @@
-Subject: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
-Date:   Tue,  2 Aug 2022 14:38:16 +0200
-Message-Id: <[email protected]>
-X-Mailer: git-send-email 2.20.1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-Precedence: bulk
-List-ID: <linux-pci.vger.kernel.org>
-X-Mailing-List: [email protected]
-
-Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
-document describes in erratum 3.12 PCIe Completion Timeout (Ref #: 251),
-that PCIe IP does not support a strong-ordered model for inbound posted vs.
-outbound completion.
-
-As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux Control
-register must be set. It disables the ordering check in the core between
-Completions and Posted requests received from the link.
-
-Marvell also suggests to do full memory barrier at the beginning of
-aardvark summary interrupt handler before calling interrupt handlers of
-endpoint drivers in order to minimize the risk for the race condition
-documented in the Erratum between the DMA done status reading and the
-completion of writing to the host memory.
-
-More details about this issue and suggested workarounds are in discussion:
-https://lore.kernel.org/linux-pci/BN9PR18MB425154FE5019DCAF2028A1D5DB8D9@BN9PR18MB4251.namprd18.prod.outlook.com/t/#u
-
-It was reported that enabling this workaround fixes instability issues and
-"Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with Qualcomm
-QCA6335 chip under significant load which were caused by interrupt status
-stuck in the outbound CMPLT queue traced back to this erratum.
-
-This workaround fixes also kernel panic triggered after some minutes of
-usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip:
-
-    Internal error: synchronous external abort: 96000210 [#1] SMP
-    Kernel panic - not syncing: Fatal exception in interrupt
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
-Signed-off-by: Pali Rohár <[email protected]>
-Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Cc: [email protected]
----
- drivers/pci/controller/pci-aardvark.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -212,6 +212,8 @@ enum {
- };
- 
- #define VENDOR_ID_REG				(LMI_BASE_ADDR + 0x44)
-+#define DEBUG_MUX_CTRL_REG			(LMI_BASE_ADDR + 0x208)
-+#define     DIS_ORD_CHK				BIT(30)
- 
- /* PCIe core controller registers */
- #define CTRL_CORE_BASE_ADDR			0x18000
-@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad
- 		PCIE_CORE_CTRL2_TD_ENABLE;
- 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- 
-+	/* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */
-+	reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG);
-+	reg |= DIS_ORD_CHK;
-+	advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG);
-+
- 	/* Set lane X1 */
- 	reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- 	reg &= ~LANE_CNT_MSK;
-@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler
- 	struct advk_pcie *pcie = arg;
- 	u32 status;
- 
-+	/* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */
-+	mb();
-+
- 	status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
- 	if (!(status & PCIE_IRQ_CORE_INT))
- 		return IRQ_NONE;

target/linux/mvebu/patches-6.1/105-power-reset-linkstation-poweroff-add-ls220de.patch

@@ -1,15 +0,0 @@
---- a/drivers/power/reset/linkstation-poweroff.c
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -142,6 +142,12 @@ static void linkstation_poweroff(void)
- }
- 
- static const struct of_device_id ls_poweroff_of_match[] = {
-+	{ .compatible = "buffalo,ls220d",
-+	  .data = &linkstation_power_off_cfg,
-+	},
-+	{ .compatible = "buffalo,ls220de",
-+	  .data = &linkstation_power_off_cfg,
-+	},
- 	{ .compatible = "buffalo,ls421d",
- 	  .data = &linkstation_power_off_cfg,
- 	},

target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch

@@ -1,279 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <[email protected]>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <[email protected]>
-
-This patch has been modified to be mvebu specific. The original patch 
-did not pass the bootloader cmdline on if no append-rootblock stanza 
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <[email protected]>
----
- arch/arm/Kconfig                        | 11 ++++
- arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
- init/main.c                             | 16 +++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1587,6 +1587,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- 	  The command-line arguments provided by the boot loader will be
- 	  appended to the the device tree bootargs property.
- 
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+	bool "Append rootblock parsing bootloader's kernel arguments"
-+	help
-+	  The command-line arguments provided by the boot loader will be
-+	  appended to a new device tree property: bootloader-args.
-+	  If there is a property "append-rootblock" in DT under /chosen 
-+	  and a root= option in bootloaders command line it will be parsed 
-+	  and added to DT bootargs with the form: <append-rootblock>XX.
-+	  Only command line ATAG will be processed, the rest of the ATAGs
-+	  sent by bootloader will be ignored.
-+
- endchoice
- 
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -5,6 +5,8 @@
- 
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -20,6 +22,7 @@ static int node_offset(void *fdt, const
- 	return offset;
- }
- 
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static int setprop(void *fdt, const char *node_path, const char *property,
- 		   void *val_array, int size)
- {
-@@ -28,6 +31,7 @@ static int setprop(void *fdt, const char
- 		return offset;
- 	return fdt_setprop(fdt, offset, property, val_array, size);
- }
-+#endif
- 
- static int setprop_string(void *fdt, const char *node_path,
- 			  const char *property, const char *string)
-@@ -38,6 +42,7 @@ static int setprop_string(void *fdt, con
- 	return fdt_setprop_string(fdt, offset, property, string);
- }
- 
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static int setprop_cell(void *fdt, const char *node_path,
- 			const char *property, uint32_t val)
- {
-@@ -46,6 +51,7 @@ static int setprop_cell(void *fdt, const
- 		return offset;
- 	return fdt_setprop_cell(fdt, offset, property, val);
- }
-+#endif
- 
- static const void *getprop(const void *fdt, const char *node_path,
- 			   const char *property, int *len)
-@@ -58,6 +64,7 @@ static const void *getprop(const void *f
- 	return fdt_getprop(fdt, offset, property, len);
- }
- 
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static uint32_t get_cell_size(const void *fdt)
- {
- 	int len;
-@@ -69,6 +76,74 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+#endif
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+	const char *ptr, *end;
-+	const char *root="root=";
-+	int i, l;
-+	const char *rootblock;
-+
-+	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+	ptr = str - 1;
-+
-+	do {
-+		//first find an 'r' at the begining or after a space
-+		do {
-+			ptr++;
-+			ptr = strchr(ptr, 'r');
-+			if (!ptr)
-+				goto no_append;
-+
-+		} while (ptr != str && *(ptr-1) != ' ');
-+
-+		//then check for the rest
-+		for(i = 1; i <= 4; i++)
-+			if(*(ptr+i) != *(root+i)) break;
-+
-+	} while (i != 5);
-+
-+	end = strchr(ptr, ' ');
-+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+	ptr = end + 1;
-+
-+	/* if append-rootblock property is set use it to append to command line */
-+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+	if (rootblock == NULL)
-+		goto no_append;
-+
-+	if (*dest != ' ') {
-+		*dest = ' ';
-+		dest++;
-+		len++;
-+	}
-+
-+	if (len + l + i <= COMMAND_LINE_SIZE) {
-+		memcpy(dest, rootblock, l);
-+		dest += l - 1;
-+		memcpy(dest, ptr, i);
-+		dest += i;
-+	}
-+
-+	return dest;
-+
-+no_append:
-+	len = strlen(str);
-+	if (len + 1 < COMMAND_LINE_SIZE) {
-+		memcpy(dest, str, len);
-+		dest += len;
-+	}
-+
-+	return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -88,18 +163,28 @@ static void merge_fdt_bootargs(void *fdt
- 
- 	/* and append the ATAG_CMDLINE */
- 	if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+		//save original bootloader args
-+		//and append ubi.mtd with root partition number to current cmdline
-+		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- 		len = strlen(fdt_cmdline);
- 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- 			*ptr++ = ' ';
- 			memcpy(ptr, fdt_cmdline, len);
- 			ptr += len;
- 		}
-+#endif
- 	}
- 	*ptr = '\0';
- 
- 	setprop_string(fdt, "/chosen", "bootargs", cmdline);
- }
- 
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- static void hex_str(char *out, uint32_t value)
- {
- 	uint32_t digit;
-@@ -117,6 +202,7 @@ static void hex_str(char *out, uint32_t
- 	}
- 	*out = '\0';
- }
-+#endif
- 
- /*
-  * Convert and fold provided ATAGs into the provided FDT.
-@@ -131,9 +217,11 @@ int atags_to_fdt(void *atag_list, void *
- 	struct tag *atag = atag_list;
- 	/* In the case of 64 bits memory size, need to reserve 2 cells for
- 	 * address and size for each bank */
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
- 	__be32 mem_reg_property[2 * 2 * NR_BANKS];
--	int memcount = 0;
--	int ret, memsize;
-+	int memsize, memcount = 0;
-+#endif
-+	int ret;
- 
- 	/* make sure we've got an aligned pointer */
- 	if ((u32)atag_list & 0x3)
-@@ -168,7 +256,9 @@ int atags_to_fdt(void *atag_list, void *
- 			else
- 				setprop_string(fdt, "/chosen", "bootargs",
- 					       atag->u.cmdline.cmdline);
--		} else if (atag->hdr.tag == ATAG_MEM) {
-+		}
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+		else if (atag->hdr.tag == ATAG_MEM) {
- 			if (memcount >= sizeof(mem_reg_property)/4)
- 				continue;
- 			if (!atag->u.mem.size)
-@@ -212,6 +302,10 @@ int atags_to_fdt(void *atag_list, void *
- 		setprop(fdt, "/memory", "reg", mem_reg_property,
- 			4 * memcount * memsize);
- 	}
-+#else
-+
-+	}
-+#endif
- 
- 	return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -113,6 +113,10 @@
- 
- #include <kunit/test.h>
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
- 
- extern void init_IRQ(void);
-@@ -996,6 +1000,18 @@ asmlinkage __visible void __init __no_sa
- 	page_alloc_init();
- 
- 	pr_notice("Kernel command line: %s\n", saved_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+	//Show bootloader's original command line for reference
-+	if(of_chosen) {
-+		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+		if(prop)
-+			pr_notice("Bootloader command line (ignored): %s\n", prop);
-+		else
-+			pr_notice("Bootloader command line not present\n");
-+	}
-+#endif
-+
- 	/* parameters may set static keys */
- 	jump_label_init();
- 	parse_early_param();

target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch

@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -66,6 +66,7 @@ config MACH_ARMADA_38X
- 	select HAVE_ARM_TWD if SMP
- 	select MACH_MVEBU_V7
- 	select PINCTRL_ARMADA_38X
-+	select ARCH_WANT_LIBATA_LEDS
- 	help
- 	  Say 'Y' here if you want your kernel to support boards based
- 	  on the Marvell Armada 380/385 SoC with device tree.

target/linux/mvebu/patches-6.1/302-add_powertables.patch

@@ -1,770 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -214,11 +214,19 @@
- &pcie1 {
- 	/* Marvell 88W8864, 5GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,2ghz = <0>;
-+	};
- };
- 
- &pcie2 {
- 	/* Marvell 88W8864, 2GHz-only */
- 	status = "okay";
-+
-+	mwlwifi {
-+		marvell,5ghz = <0>;
-+	};
- };
- 
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+			CA =
-+				<36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+			CN =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+			ETSI =
-+				<36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+				<149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+			FCC =
-+				<36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+				<165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <2 2>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+			CN =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- 		};
- 	};
- };
-+
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+				<149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+				<165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+			CA =
-+				<36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+			CN =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+				<165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+			ETSI =
-+				<36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+				<149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+			FCC =
-+				<36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+				<40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+				<52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+				<108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+				<149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+				<165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+		};
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+		marvell,powertable {
-+			AU =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			CA =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+			CN =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			ETSI =
-+				<1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+				<13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+			FCC =
-+				<1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+				<2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+				<11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- 	};
- };
- 
-+&pcie1 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
-+&pcie2 {
-+	mwlwifi {
-+		marvell,chainmask = <4 4>;
-+	};
-+};
-+
- &sdhci {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -223,12 +223,100 @@
- 	pcie@2,0 {
- 		/* Port 0, Lane 1 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,5ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+				ETSI =
-+					<1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+					<13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+			};
-+		};
- 	};
- 
- 	/* Second mini-PCIe port */
- 	pcie@3,0 {
- 		/* Port 0, Lane 3 */
- 		status = "okay";
-+
-+		mwlwifi {
-+			marvell,2ghz = <0>;
-+			marvell,chainmask = <4 4>;
-+			marvell,powertable {
-+				FCC =
-+					<36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+					<52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+					<100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+					<149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+					<165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+				ETSI =
-+					<36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+					<149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+			};
-+		};
- 	};
- };
- 

target/linux/mvebu/patches-6.1/304-revert_i2c_delay.patch

@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
- 
- &i2c0 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11000 0x100>;
- };
- 
- &i2c1 {
--	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 	reg = <0x11100 0x100>;
- };
- 

target/linux/mvebu/patches-6.1/305-armada-385-rd-mtd-partitions.patch

@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- 		compatible = "st,m25p128", "jedec,spi-nor";
- 		reg = <0>; /* Chip select 0 */
- 		spi-max-frequency = <108000000>;
-+
-+		partition@0 {
-+			label = "uboot";
-+			reg = <0 0x400000>;
-+		};
-+
-+		partition@1 {
-+			label = "firmware";
-+			reg = <0x400000 0xc00000>;
-+		};
- 	};
- };
- 

target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch

@@ -1,35 +0,0 @@
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <[email protected]>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <[email protected]>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- 			#size-cells = <1>;
- 
- 			partition@0 {
--				label = "U-Boot";
-+				label = "u-boot";
- 				reg = <0x00000000 0x00800000>;
- 				read-only;
- 			};
- 
- 			partition@800000 {
--				label = "uImage";
-+				label = "kernel";
- 				reg = <0x00800000 0x00400000>;
- 				read-only;
- 			};
- 
- 			partition@c00000 {
--				label = "Root";
-+				label = "ubi";
- 				reg = <0x00c00000 0x3f400000>;
- 			};
- 		};

target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch

@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -483,3 +483,7 @@
- 		};
- 	};
- };
-+
-+&coherencyfab {
-+	broken-idle;
-+};

target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch

@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -385,7 +385,7 @@
- 
- 			port@4 {
- 				reg = <4>;
--				label = "internet";
-+				label = "wan";
- 			};
- 
- 			port@5 {

target/linux/mvebu/patches-6.1/309-linksys-status-led.patch

@@ -1,50 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- 	compatible = "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -71,7 +78,7 @@
- 		pinctrl-0 = <&gpio_leds_pins>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";
- 		};
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- 	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- 		     "marvell,armadaxp", "marvell,armada-370-xp";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200";
- 		stdout-path = &uart0;
-@@ -195,7 +202,7 @@
- 		pinctrl-0 = <&power_led_pin>;
- 		pinctrl-names = "default";
- 
--		power {
-+		led_power: power {
- 			label = "mamba:white:power";
- 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- 			default-state = "on";

target/linux/mvebu/patches-6.1/310-linksys-use-eth0-as-cpu-port.patch

@@ -1,25 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
- 
- &eth2 {
--	status = "okay";
-+	status = "disabled";
- 	phy-mode = "sgmii";
- 	buffer-manager = <&bm>;
- 	bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- 				label = "wan";
- 			};
- 
--			port@5 {
--				reg = <5>;
-+			port@6 {
-+				reg = <6>;
- 				label = "cpu";
--				ethernet = <&eth2>;
-+				ethernet = <&eth0>;
- 
- 				fixed-link {
- 					speed = <1000>;

target/linux/mvebu/patches-6.1/311-adjust-compatible-for-linksys.patch

@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
- 
- / {
- 	model = "Linksys WRT3200ACM";
--	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
- 
- / {
--	model = "Linksys WRT1900AC";
--	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
--		     "marvell,armadaxp", "marvell,armada-370-xp";
-+	model = "Linksys WRT1900AC v1";
-+	compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+		     "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+		     "marvell,armada-370-xp";
- 
- 	aliases {
- 		led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
- 
- / {
--	model = "Linksys WRT1900ACv2";
--	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+	model = "Linksys WRT1900AC v2";
-+	compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1200AC";
--	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
--		     "marvell,armada380";
-+	compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+		     "marvell,armada385", "marvell,armada380";
- };
- 
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
- 
- / {
- 	model = "Linksys WRT1900ACS";
--	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+	compatible = "linksys,wrt1900acs", "linksys,shelby",
-+		     "linksys,armada385", "marvell,armada385",
- 		     "marvell,armada380";
- };
- 

target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch

@@ -1,87 +0,0 @@
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <[email protected]>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <[email protected]>
----
- .../arm/boot/dts/armada-388-clearfog-base.dts |  1 +
- .../armada-38x-solidrun-microsom-emmc.dtsi    | 62 +++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
- 
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
- 
- / {
- 	model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ *  Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board.  Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License
-+ *     version 2 as published by the Free Software Foundation.
-+ *
-+ *     This file is distributed in the hope that it will be useful
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+	soc {
-+		internal-regs {
-+			sdhci@d8000 {
-+				bus-width = <4>;
-+				no-1-8-v;
-+				non-removable;
-+				pinctrl-0 = <&microsom_sdhci_pins>;
-+				pinctrl-names = "default";
-+				status = "okay";
-+				wp-inverted;
-+			};
-+		};
-+	};
-+};

target/linux/mvebu/patches-6.1/313-helios4-dts-status-led-alias.patch

@@ -1,28 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -15,6 +15,13 @@
- 	model = "Helios4";
- 	compatible = "kobol,helios4", "marvell,armada388",
- 		"marvell,armada385", "marvell,armada380";
-+		
-+	aliases {
-+		led-boot = &led_status;
-+		led-failsafe = &led_status;
-+		led-running = &led_status;
-+		led-upgrade = &led_status;
-+	};
- 
- 	memory {
- 		device_type = "memory";
-@@ -73,10 +80,9 @@
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&helios_system_led_pins>;
- 
--		status-led {
-+		led_status: status-led {
- 			label = "helios4:green:status";
- 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
--			linux,default-trigger = "heartbeat";
- 			default-state = "on";
- 		};
- 

target/linux/mvebu/patches-6.1/314-arm64-dts-marvell-enable-heartbeat-LED-by-default.patch

@@ -1,22 +0,0 @@
-From: Tomasz Maciej Nowak <[email protected]>
-Date: Fri, 7 Jul 2023 19:06:05 +0200
-Subject: [PATCH] arm64: dts: marvell: enable heartbeat LED by default
-
-Some boards could be placed in an enclosure, so enable LED18 by default,
-since that'll be the only visible indicator that the board is operating.
-
-Signed-off-by: Tomasz Maciej Nowak <[email protected]>
----
- arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -25,6 +25,7 @@
- 			function = LED_FUNCTION_HEARTBEAT;
- 			color = <LED_COLOR_ID_GREEN>;
- 			linux,default-trigger = "heartbeat";
-+			default-state = "on";
- 		};
- 	};
- };

target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch

@@ -1,37 +0,0 @@
-From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
-From: Tad <[email protected]>
-Date: Fri, 5 Feb 2021 22:32:11 -0500
-Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
- partition to 4MB
-
-Signed-off-by: Tad Davanzo <[email protected]>
----
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -454,9 +454,9 @@
- 				reg = <0xa00000 0x2800000>;  /* 40MB */
- 			};
- 
--			partition@d00000 {
-+			partition@e00000 {
- 				label = "rootfs1";
--				reg = <0xd00000 0x2500000>;  /* 37MB */
-+				reg = <0xe00000 0x2400000>;  /* 36MB */
- 			};
- 
- 			/* kernel2 overlaps with rootfs2 by design */
-@@ -465,9 +465,9 @@
- 				reg = <0x3200000 0x2800000>; /* 40MB */
- 			};
- 
--			partition@3500000 {
-+			partition@3600000 {
- 				label = "rootfs2";
--				reg = <0x3500000 0x2500000>; /* 37MB */
-+				reg = <0x3600000 0x2400000>; /* 36MB */
- 			};
- 
- 			/*

target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch

@@ -1,29 +0,0 @@
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -254,7 +254,7 @@
- 				clocks = <&gateclk 23>;
- 				clock-names = "cesa0";
- 				marvell,crypto-srams = <&crypto_sram>;
--				marvell,crypto-sram-size = <0x7e0>;
-+				marvell,crypto-sram-size = <0x800>;
- 			};
- 		};
- 
-@@ -275,12 +275,17 @@
- 			 * cpuidle workaround.
- 			 */
- 			idle-sram@0 {
-+				status = "disabled";
- 				reg = <0x0 0x20>;
- 			};
- 		};
- 	};
- };
- 
-+&coherencyfab {
-+	broken-idle;
-+};
-+
- /*
-  * Default UART pinctrl setting without RTS/CTS, can be overwritten on
-  * board level if a different configuration is used.

target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch

@@ -1,134 +0,0 @@
---- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-@@ -31,6 +31,7 @@
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
-+		append-rootblock = "nullparameter="; /* override the bootloader args */
- 	};
- 
- 	memory@0 {
-@@ -94,6 +95,8 @@
- 			       status = "okay";
- 			       phy = <&phy1>;
- 			       phy-mode = "sgmii";
-+		               nvmem-cells = <&macaddr_vendor_0>;
-+        		       nvmem-cell-names = "mac-address";
- 			};
- 
- 			sata@a0000 {
-@@ -175,6 +178,24 @@
- 			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- 		};
- 	};
-+
-+	virtual_flash {
-+		compatible = "mtd-concat";
-+
-+		devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				compatible = "openwrt,uimage", "denx,uimage";
-+				label = "firmware";
-+				reg = <0x0 0x0>;
-+			};
-+		};
-+	};
- };
- 
- &mdio {
-@@ -265,48 +286,52 @@
- 		reg = <0>; /* Chip select 0 */
- 		spi-max-frequency = <20000000>;
- 
--		/*
--		 * Warning!
--		 *
--		 * Synology u-boot uses its compiled-in environment
--		 * and it seems Synology did not care to change u-boot
--		 * default configuration in order to allow saving a
--		 * modified environment at a sensible location. So,
--		 * if you do a 'saveenv' under u-boot, your modified
--		 * environment will be saved at 1MB after the start
--		 * of the flash, i.e. in the middle of the uImage.
--		 * For that reason, it is strongly advised not to
--		 * change the default environment, unless you know
--		 * what you are doing.
--		 */
--		partition@0 { /* u-boot */
--			label = "RedBoot";
--			reg = <0x00000000 0x000c0000>; /* 768KB */
--		};
-+		partitions {
-+			compatible = "fixed-partitions";
- 
--		partition@c0000 { /* uImage */
--			label = "zImage";
--			reg = <0x000c0000 0x002d0000>; /* 2880KB */
--		};
-+			partition@0 { /* u-boot */
-+				label = "u-boot";
-+				reg = <0x00000000 0x000c0000>; /* 768KB */
-+				read-only;
-+			};
- 
--		partition@390000 { /* uInitramfs */
--			label = "rd.gz";
--			reg = <0x00390000 0x00440000>; /* 4250KB */
--		};
-+			mtd_gap: partition@c0000 { /* gap */
-+				label = "gap";
-+				reg = <0x000c0000 0x00040000>; /* 256KB */
-+			};
- 
--		partition@7d0000 { /* MAC address and serial number */
--			label = "vendor";
--			reg = <0x007d0000 0x00010000>; /* 64KB */
--		};
-+			partition@100000 { /* u-boot-env */
-+				label = "u-boot-env";
-+				reg = <0x00100000 0x00010000>; /* 64KB */
-+			};
- 
--		partition@7e0000 {
--			label = "RedBoot config";
--			reg = <0x007e0000 0x00010000>; /* 64KB */
--		};
-+			mtd_kernel: partition@110000 {
-+				label = "kernel";
-+				reg = <0x00110000 0x006c0000>; /* 6912KB */
-+			};
- 
--		partition@7f0000 {
--			label = "FIS directory";
--			reg = <0x007f0000 0x00010000>; /* 64KB */
-+			partition@7d0000 { /* MAC address and serial number */
-+				reg = <0x007d0000 0x00010000>; /* 64KB */
-+				label = "vendor";
-+				read-only;
-+
-+				compatible = "nvmem-cells";
-+
-+				nvmem-layout {
-+					compatible = "fixed-layout";
-+					#address-cells = <1>;
-+					#size-cells = <1>;
-+
-+					macaddr_vendor_0: macaddr@0 {
-+						reg = <0x0 0x6>;
-+					};
-+				};
-+			};
-+
-+			mtd_gap2: partition@7e0000 {
-+				label = "gap2";
-+				reg = <0x007e0000 0x00020000>; /* 128KB */
-+			};
- 		};
- 	};
- };

target/linux/mvebu/patches-6.1/400-find_active_root.patch

@@ -1,60 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <[email protected]>
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- 				  const struct mtd_partition **pparts,
- 				  struct mtd_part_parser_data *data)
-@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i, ret = 0;
- 	bool dedicated = true;
-@@ -152,9 +155,13 @@ static int parse_fixed_partitions(struct
- 		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 		parts[i].of_node = pp;
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+			partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
- 		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -271,6 +278,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);

target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch

@@ -1,43 +0,0 @@
-From: Felix Fietkau <[email protected]>
-Subject: mvneta: tx queue workaround
-
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Ref: https://github.com/openwrt/openwrt/issues/5411
-
-Signed-off-by: Felix Fietkau <[email protected]>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -5233,6 +5233,16 @@ static int mvneta_setup_tc(struct net_de
- 	}
- }
- 
-+#ifndef CONFIG_ARM64
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+			       struct net_device *sb_dev)
-+{
-+	/* XXX: hardware queue scheduling is broken,
-+	 * use only one queue until it is fixed */
-+	return 0;
-+}
-+#endif
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- 	.ndo_open            = mvneta_open,
- 	.ndo_stop            = mvneta_stop,
-@@ -5243,6 +5253,9 @@ static const struct net_device_ops mvnet
- 	.ndo_fix_features    = mvneta_fix_features,
- 	.ndo_get_stats64     = mvneta_get_stats64,
- 	.ndo_eth_ioctl        = mvneta_ioctl,
-+#ifndef CONFIG_ARM64
-+	.ndo_select_queue    = mvneta_select_queue,
-+#endif
- 	.ndo_bpf	     = mvneta_xdp,
- 	.ndo_xdp_xmit        = mvneta_xdp_xmit,
- 	.ndo_setup_tc	     = mvneta_setup_tc,

target/linux/mvebu/patches-6.1/701-mvpp2-read-mac-address-from-nvmem.patch

@@ -1,27 +0,0 @@
-From: Tobias Schramm <[email protected]>
-Subject: mvpp2: support fetching mac address from nvmem
-
-The mvpp2 driver did not query nvmem for hardware mac addresses. This
-patch adds querying of mac addresses stored in nvmem cells as a further
-fallback option before assigning a random address.
-Purposely added separately to fwnode_get_mac_address() above to maintain
-existing behaviour with builtin adapter mac address still taking
-precedence.
-
-Signed-off-by: Tobias Schramm <[email protected]>
----
---- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-@@ -6134,6 +6134,12 @@ static void mvpp2_port_copy_mac_addr(str
- 		}
- 	}
- 
-+	if (!of_get_mac_address(to_of_node(fwnode), hw_mac_addr)) {
-+		*mac_from = "nvmem cell";
-+		eth_hw_addr_set(dev, hw_mac_addr);
-+		return;
-+	}
-+
- 	*mac_from = "random";
- 	eth_hw_addr_random(dev);
- }

target/linux/mvebu/patches-6.1/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch

@@ -1,40 +0,0 @@
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <[email protected]>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered.  Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states.  Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <[email protected]>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- 	ret = mvebu_v7_cpu_suspend(deepidle);
- 	cpu_pm_exit();
- 
-+	/*
-+	 * If we failed to enter the desired state, indicate that we
-+	 * slept lightly.
-+	 */
- 	if (ret)
--		return ret;
-+		return 0;
- 
- 	return index;
- }

target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch

@@ -1,60 +0,0 @@
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <[email protected]>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <[email protected]>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve
- 
- 	if (port->reset_gpio) {
- 		u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+		unsigned int i;
- 
- 		of_property_read_u32(port->dn, "reset-delay-us",
- 				     &reset_udelay);
-@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve
- 		udelay(100);
- 
- 		gpiod_set_value_cansleep(port->reset_gpio, 0);
--		msleep(reset_udelay / 1000);
-+		for (i = 0; i < reset_udelay; i += 1000) {
-+			if (mvebu_pcie_link_up(port))
-+				break;
-+			msleep(1);
-+		}
-+
-+		printk("%s: reset completed in %dus\n", port->name, i);
- 	}
- 
- 	return 0;
-@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf
- 		if (!child)
- 			continue;
- 
--		ret = mvebu_pcie_powerup(port);
--		if (ret < 0)
--			continue;
--
- 		port->base = mvebu_pcie_map_registers(pdev, child, port);
- 		if (IS_ERR(port->base)) {
- 			dev_err(dev, "%s: cannot map registers\n", port->name);
- 			port->base = NULL;
--			mvebu_pcie_powerdown(port);
-+			continue;
-+		}
-+
-+		ret = mvebu_pcie_powerup(port);
-+		if (ret < 0) {
-+			port->base = NULL;
- 			continue;
- 		}
- 

target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch

@@ -1,218 +0,0 @@
-From aa4a0ccc41997f2da172165c92803abace43bd1c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:32 +0000
-Subject: [PATCH 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803
- PUZZLE driver bindings
-
-Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
-drivers. A new vendor prefix is also added accordingly for
-IEI Integration Corp.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 53 ++++++++++++
- .../leds/iei,wt61p803-puzzle-leds.yaml        | 39 +++++++++
- .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
- .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
- 4 files changed, 176 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
- create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
- create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-@@ -0,0 +1,53 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <[email protected]>
-+
-+description: |
-+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+  The HWMON module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle-hwmon
-+
-+  "#address-cells":
-+    const: 1
-+
-+  "#size-cells":
-+    const: 0
-+
-+patternProperties:
-+  "^fan-group@[0-1]$":
-+    type: object
-+    properties:
-+      reg:
-+        minimum: 0
-+        maximum: 1
-+        description:
-+          Fan group ID
-+
-+      cooling-levels:
-+        minItems: 1
-+        maxItems: 255
-+        description:
-+          Cooling levels for the fans (PWM value mapping)
-+    description: |
-+      Properties for each fan group.
-+    required:
-+      - reg
-+
-+required:
-+  - compatible
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-@@ -0,0 +1,39 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <[email protected]>
-+
-+description: |
-+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
-+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
-+
-+  The LED module is a sub-node of the MCU node in the Device Tree.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle-leds
-+
-+  "#address-cells":
-+    const: 1
-+
-+  "#size-cells":
-+    const: 0
-+
-+  led@0:
-+    type: object
-+    $ref: common.yaml
-+    description: |
-+      Properties for a single LED.
-+
-+required:
-+  - compatible
-+  - "#address-cells"
-+  - "#size-cells"
-+
-+additionalProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-@@ -0,0 +1,82 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
-+
-+maintainers:
-+  - Luka Kovacic <[email protected]>
-+
-+description: |
-+  IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
-+  It's used for controlling system power states, fans, LEDs and temperature
-+  sensors.
-+
-+  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
-+  binding documents under the respective subsystem directories.
-+
-+properties:
-+  compatible:
-+    const: iei,wt61p803-puzzle
-+
-+  current-speed:
-+    description:
-+      Serial bus speed in bps
-+    maxItems: 1
-+
-+  enable-beep: true
-+
-+  hwmon:
-+    $ref: /schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+
-+  leds:
-+    $ref: /schemas/leds/iei,wt61p803-puzzle-leds.yaml
-+
-+required:
-+  - compatible
-+  - current-speed
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/leds/common.h>
-+    serial {
-+        mcu {
-+            compatible = "iei,wt61p803-puzzle";
-+            current-speed = <115200>;
-+            enable-beep;
-+
-+            leds {
-+                compatible = "iei,wt61p803-puzzle-leds";
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                led@0 {
-+                    reg = <0>;
-+                    function = LED_FUNCTION_POWER;
-+                    color = <LED_COLOR_ID_BLUE>;
-+                };
-+            };
-+
-+            hwmon {
-+                compatible = "iei,wt61p803-puzzle-hwmon";
-+                #address-cells = <1>;
-+                #size-cells = <0>;
-+
-+                fan-group@0 {
-+                    #cooling-cells = <2>;
-+                    reg = <0x00>;
-+                    cooling-levels = <64 102 170 230 250>;
-+                };
-+
-+                fan-group@1 {
-+                    #cooling-cells = <2>;
-+                    reg = <0x01>;
-+                    cooling-levels = <64 102 170 230 250>;
-+                };
-+            };
-+        };
-+    };
---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -579,6 +579,8 @@ patternProperties:
-     description: IC Plus Corp.
-   "^idt,.*":
-     description: Integrated Device Technologies, Inc.
-+  "^iei,.*":
-+    description: IEI Integration Corp.
-   "^ifi,.*":
-     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
-   "^ilitek,.*":

target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch

@@ -1,1034 +0,0 @@
-From 692cfa85272dd12995b427c0a7a585ced5d54f32 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:33 +0000
-Subject: [PATCH 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
-
-Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some
-IEI Puzzle series devices. The microcontroller controls system power,
-temperature sensors, fans and LEDs.
-
-This driver implements the core functionality for device communication
-over the system serial (serdev bus). It handles MCU messages and the
-internal MCU properties. Some properties can be managed over sysfs.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- drivers/mfd/Kconfig                     |   9 +
- drivers/mfd/Makefile                    |   1 +
- drivers/mfd/iei-wt61p803-puzzle.c       | 908 ++++++++++++++++++++++++
- include/linux/mfd/iei-wt61p803-puzzle.h |  66 ++
- 4 files changed, 984 insertions(+)
- create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
- create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
-
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -2222,6 +2222,15 @@ config SGI_MFD_IOC3
- 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
- 	  then say Y. Otherwise say N.
- 
-+config MFD_IEI_WT61P803_PUZZLE
-+	tristate "IEI WT61P803 PUZZLE MCU driver"
-+	depends on SERIAL_DEV_BUS
-+	select MFD_CORE
-+	help
-+	  IEI WT61P803 PUZZLE is a system power management microcontroller
-+	  used for fan control, temperature sensor reading, LED control
-+	  and system identification.
-+
- config MFD_INTEL_M10_BMC
- 	tristate "Intel MAX 10 Board Management Controller"
- 	depends on SPI_MASTER
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831)	+= rt4831.o
- obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
- obj-$(CONFIG_MFD_RT5120)	+= rt5120.o
- obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
-+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE)  += iei-wt61p803-puzzle.o
- 
- obj-$(CONFIG_INTEL_SOC_PMIC)		+= intel_soc_pmic_crc.o
- obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
---- /dev/null
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -0,0 +1,908 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <[email protected]>
-+ */
-+
-+#include <linux/atomic.h>
-+#include <linux/delay.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/core.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/property.h>
-+#include <linux/sched.h>
-+#include <linux/serdev.h>
-+#include <linux/slab.h>
-+#include <linux/sysfs.h>
-+#include <asm/unaligned.h>
-+
-+/* start, payload and XOR checksum at end */
-+#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH	(1 + 20 + 1)
-+#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE	512
-+
-+#define IEI_WT61P803_PUZZLE_MAC_LENGTH			17
-+#define IEI_WT61P803_PUZZLE_SN_LENGTH			36
-+#define IEI_WT61P803_PUZZLE_VERSION_LENGTH		 6
-+#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH		16
-+#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH	 8
-+#define IEI_WT61P803_PUZZLE_NB_MAC			 8
-+
-+/* Use HZ as a timeout value throughout the driver */
-+#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ
-+
-+enum iei_wt61p803_puzzle_attribute_type {
-+	IEI_WT61P803_PUZZLE_VERSION,
-+	IEI_WT61P803_PUZZLE_BUILD_INFO,
-+	IEI_WT61P803_PUZZLE_BOOTLOADER_MODE,
-+	IEI_WT61P803_PUZZLE_PROTOCOL_VERSION,
-+	IEI_WT61P803_PUZZLE_SERIAL_NUMBER,
-+	IEI_WT61P803_PUZZLE_MAC_ADDRESS,
-+	IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS,
-+	IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY,
-+	IEI_WT61P803_PUZZLE_POWER_STATUS,
-+};
-+
-+struct iei_wt61p803_puzzle_device_attribute {
-+	struct device_attribute dev_attr;
-+	enum iei_wt61p803_puzzle_attribute_type type;
-+	u8 index;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state
-+ * @ac_recovery_status_flag:	AC Recovery Status Flag
-+ * @power_loss_recovery:	System recovery after power loss
-+ * @power_status:		System Power-on Method
-+ */
-+struct iei_wt61p803_puzzle_mcu_status {
-+	u8 ac_recovery_status_flag;
-+	u8 power_loss_recovery;
-+	u8 power_status;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_reply - MCU reply
-+ * @size:	Size of the MCU reply
-+ * @data:	Full MCU reply buffer
-+ * @state:	Current state of the packet
-+ * @received:	Was the response fullfilled
-+ */
-+struct iei_wt61p803_puzzle_reply {
-+	size_t size;
-+	unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE];
-+	struct completion received;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_mcu_version - MCU version status
-+ * @version:		Primary firmware version
-+ * @build_info:		Build date and time
-+ * @bootloader_mode:	Status of the MCU operation
-+ * @protocol_version:	MCU communication protocol version
-+ * @serial_number:	Device factory serial number
-+ * @mac_address:	Device factory MAC addresses
-+ *
-+ * Last element of arrays is reserved for '\0'.
-+ */
-+struct iei_wt61p803_puzzle_mcu_version {
-+	char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1];
-+	char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1];
-+	bool bootloader_mode;
-+	char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1];
-+	char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1];
-+	char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver
-+ * @serdev:		Pointer to underlying serdev device
-+ * @dev:		Pointer to underlying dev device
-+ * @reply_lock:		Reply mutex lock
-+ * @reply:		Pointer to the iei_wt61p803_puzzle_reply struct
-+ * @version:		MCU version related data
-+ * @status:		MCU status related data
-+ * @response_buffer	Command response buffer allocation
-+ * @lock		General member mutex lock
-+ */
-+struct iei_wt61p803_puzzle {
-+	struct serdev_device *serdev;
-+	struct device *dev;
-+	struct mutex reply_lock; /* lock to prevent multiple firmware calls */
-+	struct iei_wt61p803_puzzle_reply *reply;
-+	struct iei_wt61p803_puzzle_mcu_version version;
-+	struct iei_wt61p803_puzzle_mcu_status status;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	struct mutex lock; /* lock to protect response buffer */
-+};
-+
-+static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len)
-+{
-+	unsigned char checksum = 0;
-+	size_t i;
-+
-+	for (i = 0; i < len; i++)
-+		checksum ^= buf[i];
-+	return checksum;
-+}
-+
-+static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu,
-+					    const unsigned char *raw_resp_data, size_t size)
-+{
-+	unsigned char checksum;
-+
-+	/* Check the incoming frame header */
-+	if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START ||
-+	      raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER ||
-+	     (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM &&
-+	      raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) {
-+		if (mcu->reply->size + size >= sizeof(mcu->reply->data))
-+			return -EIO;
-+
-+		/* Append the frame to existing data */
-+		memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size);
-+		mcu->reply->size += size;
-+	} else {
-+		if (size >= sizeof(mcu->reply->data))
-+			return -EIO;
-+
-+		/* Start processing a new frame */
-+		memcpy(mcu->reply->data, raw_resp_data, size);
-+		mcu->reply->size = size;
-+	}
-+
-+	checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1);
-+	if (checksum != mcu->reply->data[mcu->reply->size - 1]) {
-+		/* The checksum isn't matched yet, wait for new frames */
-+		return size;
-+	}
-+
-+	/* Received all the data */
-+	complete(&mcu->reply->received);
-+
-+	return size;
-+}
-+
-+static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev,
-+					const unsigned char *data, size_t size)
-+{
-+	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
-+	int ret;
-+
-+	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
-+	/* Return the number of processed bytes if function returns error,
-+	 * discard the remaining incoming data, since the frame this data
-+	 * belongs to is broken anyway
-+	 */
-+	if (ret < 0)
-+		return size;
-+
-+	return ret;
-+}
-+
-+static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = {
-+	.receive_buf  = iei_wt61p803_puzzle_recv_buf,
-+	.write_wakeup = serdev_device_write_wakeup,
-+};
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ * @reply_size: Pointer to size_t (size of reply_data)
-+ * @retry_count: Number of times to retry sending the command to the MCU
-+ */
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+					       unsigned char *cmd, size_t size,
-+					       unsigned char *reply_data,
-+					       size_t *reply_size, int retry_count)
-+{
-+	struct device *dev = &mcu->serdev->dev;
-+	int ret, i;
-+
-+	for (i = 0; i < retry_count; i++) {
-+		ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size,
-+							reply_data, reply_size);
-+		if (ret != -ETIMEDOUT)
-+			return ret;
-+	}
-+
-+	dev_err(dev, "Command response timed out. Retries: %d\n", retry_count);
-+
-+	return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog);
-+
-+/**
-+ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU
-+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
-+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
-+ * @size: Size of the cmd char array
-+ * @reply_data: Pointer to the reply/response data array (should be allocated)
-+ *
-+ * Sends a structured command to the MCU.
-+ */
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char *cmd, size_t size,
-+				      unsigned char *reply_data,
-+				      size_t *reply_size)
-+{
-+	struct device *dev = &mcu->serdev->dev;
-+	int ret;
-+
-+	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
-+		return -EINVAL;
-+
-+	mutex_lock(&mcu->reply_lock);
-+
-+	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
-+
-+	/* Initialize reply struct */
-+	reinit_completion(&mcu->reply->received);
-+	mcu->reply->size = 0;
-+	usleep_range(2000, 10000);
-+	serdev_device_write_flush(mcu->serdev);
-+	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+	if (ret < 0)
-+		goto exit;
-+
-+	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+	ret = wait_for_completion_timeout(&mcu->reply->received,
-+					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+	if (ret == 0) {
-+		dev_err(dev, "Command reply receive timeout\n");
-+		ret = -ETIMEDOUT;
-+		goto exit;
-+	}
-+
-+	*reply_size = mcu->reply->size;
-+	/* Copy the received data, as it will not be available after a new frame is received */
-+	memcpy(reply_data, mcu->reply->data, mcu->reply->size);
-+	ret = 0;
-+exit:
-+	mutex_unlock(&mcu->reply_lock);
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command);
-+
-+static int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char buzzer_cmd[4] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
-+	buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EPROTO;
-+		goto exit;
-+	}
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char version_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION,
-+	};
-+	unsigned char build_info_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD,
-+	};
-+	unsigned char bootloader_mode_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE,
-+	};
-+	unsigned char protocol_version_cmd[3] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION,
-+	};
-+	unsigned char *rb = mcu->response_buffer;
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd),
-+						rb, &reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 7) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd,
-+						sizeof(build_info_cmd),	rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 15) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c",
-+		rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11],
-+		rb[12], rb[13]);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd,
-+						sizeof(bootloader_mode_cmd), rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 4) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS)
-+		mcu->version.bootloader_mode = false;
-+	else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER)
-+		mcu->version.bootloader_mode = true;
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd,
-+						sizeof(protocol_version_cmd), rb,
-+						&reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size < 9) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c",
-+		rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char mcu_status_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
-+	};
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+	if (reply_size < 20) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	/* Response format:
-+	 * (IDX	RESPONSE)
-+	 * 0	@
-+	 * 1	O
-+	 * 2	S
-+	 * 3	S
-+	 * ...
-+	 * 5	AC Recovery Status Flag
-+	 * ...
-+	 * 10	Power Loss Recovery
-+	 * ...
-+	 * 19	Power Status (system power on method)
-+	 * 20	XOR checksum
-+	 */
-+	if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	    resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER &&
-+	    resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS &&
-+	    resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) {
-+		mcu->status.ac_recovery_status_flag = resp_buf[5];
-+		mcu->status.power_loss_recovery = resp_buf[10];
-+		mcu->status.power_status = resp_buf[19];
-+	}
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char serial_number_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+		0x00,	/* EEPROM read address */
-+		0x24,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+						sizeof(serial_number_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+
-+	if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.serial_number, "%.*s",
-+		IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu,
-+						   unsigned char serial_number[36])
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char serial_number_header[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+		0x00,	/* EEPROM write address */
-+		0xC,	/* Data length */
-+	};
-+	unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */
-+	int ret, sn_counter;
-+	size_t reply_size;
-+
-+	/* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */
-+	mutex_lock(&mcu->lock);
-+	for (sn_counter = 0; sn_counter < 3; sn_counter++) {
-+		serial_number_header[2] = 0x0 + 0xC * sn_counter;
-+
-+		memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header));
-+		memcpy(serial_number_cmd + sizeof(serial_number_header),
-+		       serial_number + 0xC * sn_counter, 0xC);
-+
-+		ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
-+							sizeof(serial_number_cmd),
-+							resp_buf, &reply_size);
-+		if (ret)
-+			goto err;
-+		if (reply_size != 3) {
-+			ret = -EIO;
-+			goto err;
-+		}
-+		if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+		      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+		      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+			ret = -EPROTO;
-+			goto err;
-+		}
-+	}
-+
-+	sprintf(mcu->version.serial_number, "%.*s",
-+		IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char mac_address_cmd[5] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
-+		0x00,	/* EEPROM read address */
-+		0x11,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu->lock);
-+	mac_address_cmd[2] = 0x24 + 0x11 * index;
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+						sizeof(mac_address_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+
-+	if (reply_size < 22) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.mac_address[index], "%.*s",
-+		IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int
-+iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH],
-+				      int mac_address_idx)
-+{
-+	unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char mac_address_header[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
-+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
-+		0x00,	/* EEPROM write address */
-+		0x11,	/* Data length */
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC)
-+		return -EINVAL;
-+
-+	mac_address_header[2] = 0x24 + 0x11 * mac_address_idx;
-+
-+	/* Concat mac_address_header, mac_address to mac_address_cmd */
-+	memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header));
-+	memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address,
-+	       IEI_WT61P803_PUZZLE_MAC_LENGTH);
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
-+						sizeof(mac_address_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto err;
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto err;
-+	}
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EPROTO;
-+		goto err;
-+	}
-+
-+	sprintf(mcu->version.mac_address[mac_address_idx], "%.*s",
-+		IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address);
-+err:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu,
-+							 int power_loss_recovery_action)
-+{
-+	unsigned char *resp_buf = mcu->response_buffer;
-+	unsigned char power_loss_recovery_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4)
-+		return -EINVAL;
-+
-+	power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER;
-+	power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS;
-+	power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action];
-+
-+	mutex_lock(&mcu->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd,
-+						sizeof(power_loss_recovery_cmd),
-+						resp_buf, &reply_size);
-+	if (ret)
-+		goto exit;
-+	mcu->status.power_loss_recovery = power_loss_recovery_action;
-+exit:
-+	mutex_unlock(&mcu->lock);
-+	return ret;
-+}
-+
-+#define to_puzzle_dev_attr(_attr) \
-+	container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr)
-+
-+static ssize_t show_output(struct device *dev,
-+			   struct device_attribute *attr, char *buf)
-+{
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+	int ret;
-+
-+	switch (pattr->type) {
-+	case IEI_WT61P803_PUZZLE_VERSION:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version);
-+	case IEI_WT61P803_PUZZLE_BUILD_INFO:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info);
-+	case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE:
-+		return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode);
-+	case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION:
-+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version);
-+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+		ret = iei_wt61p803_puzzle_get_serial_number(mcu);
-+		if (!ret)
-+			ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number);
-+		else
-+			ret = 0;
-+		return ret;
-+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+		ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index);
-+		if (!ret)
-+			ret = scnprintf(buf, PAGE_SIZE, "%s\n",
-+					mcu->version.mac_address[pattr->index]);
-+		else
-+			ret = 0;
-+		return ret;
-+	case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+	case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+		ret = iei_wt61p803_puzzle_get_mcu_status(mcu);
-+		if (ret)
-+			return ret;
-+
-+		mutex_lock(&mcu->lock);
-+		switch (pattr->type) {
-+		case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n",
-+					mcu->status.ac_recovery_status_flag);
-+			break;
-+		case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery);
-+			break;
-+		case IEI_WT61P803_PUZZLE_POWER_STATUS:
-+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status);
-+			break;
-+		default:
-+			ret = 0;
-+			break;
-+		}
-+		mutex_unlock(&mcu->lock);
-+		return ret;
-+	default:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static ssize_t store_output(struct device *dev,
-+			    struct device_attribute *attr,
-+			    const char *buf, size_t len)
-+{
-+	unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH];
-+	unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH];
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
-+	int power_loss_recovery_action = 0;
-+	int ret;
-+
-+	switch (pattr->type) {
-+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
-+		if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1))
-+			return -EINVAL;
-+		memcpy(serial_number, buf, sizeof(serial_number));
-+		ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number);
-+		if (ret)
-+			return ret;
-+		return len;
-+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
-+		if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1))
-+			return -EINVAL;
-+
-+		memcpy(mac_address, buf, sizeof(mac_address));
-+
-+		if (strlen(attr->attr.name) != 13)
-+			return -EIO;
-+
-+		ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index);
-+		if (ret)
-+			return ret;
-+		return len;
-+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
-+		ret = kstrtoint(buf, 10, &power_loss_recovery_action);
-+		if (ret)
-+			return ret;
-+		ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu,
-+								    power_loss_recovery_action);
-+		if (ret)
-+			return ret;
-+		return len;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \
-+	struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \
-+		{ .dev_attr	= __ATTR(_name, _mode, _show, _store), \
-+		  .type		= _type, \
-+		  .index	= _index }
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \
-+	IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id)
-+
-+#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \
-+	IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id)
-+
-+static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0);
-+static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0);
-+
-+static struct attribute *iei_wt61p803_puzzle_attrs[] = {
-+	&dev_attr_version.dev_attr.attr,
-+	&dev_attr_build_info.dev_attr.attr,
-+	&dev_attr_bootloader_mode.dev_attr.attr,
-+	&dev_attr_protocol_version.dev_attr.attr,
-+	&dev_attr_serial_number.dev_attr.attr,
-+	&dev_attr_mac_address_0.dev_attr.attr,
-+	&dev_attr_mac_address_1.dev_attr.attr,
-+	&dev_attr_mac_address_2.dev_attr.attr,
-+	&dev_attr_mac_address_3.dev_attr.attr,
-+	&dev_attr_mac_address_4.dev_attr.attr,
-+	&dev_attr_mac_address_5.dev_attr.attr,
-+	&dev_attr_mac_address_6.dev_attr.attr,
-+	&dev_attr_mac_address_7.dev_attr.attr,
-+	&dev_attr_ac_recovery_status.dev_attr.attr,
-+	&dev_attr_power_loss_recovery.dev_attr.attr,
-+	&dev_attr_power_status.dev_attr.attr,
-+	NULL
-+};
-+ATTRIBUTE_GROUPS(iei_wt61p803_puzzle);
-+
-+static int iei_wt61p803_puzzle_sysfs_create(struct device *dev,
-+					    struct iei_wt61p803_puzzle *mcu)
-+{
-+	int ret;
-+
-+	ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+	if (ret)
-+		mfd_remove_devices(mcu->dev);
-+
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev,
-+					    struct iei_wt61p803_puzzle *mcu)
-+{
-+	/* Remove sysfs groups */
-+	sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
-+	mfd_remove_devices(mcu->dev);
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev)
-+{
-+	struct device *dev = &serdev->dev;
-+	struct iei_wt61p803_puzzle *mcu;
-+	u32 baud;
-+	int ret;
-+
-+	/* Read the baud rate from 'current-speed', because the MCU supports different rates */
-+	if (device_property_read_u32(dev, "current-speed", &baud)) {
-+		dev_err(dev,
-+			"'current-speed' is not specified in device node\n");
-+		return -EINVAL;
-+	}
-+	dev_dbg(dev, "Driver baud rate: %d\n", baud);
-+
-+	/* Allocate the memory */
-+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
-+	if (!mcu)
-+		return -ENOMEM;
-+
-+	mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL);
-+	if (!mcu->reply)
-+		return -ENOMEM;
-+
-+	/* Initialize device struct data */
-+	mcu->serdev = serdev;
-+	mcu->dev = dev;
-+	init_completion(&mcu->reply->received);
-+	mutex_init(&mcu->reply_lock);
-+	mutex_init(&mcu->lock);
-+
-+	/* Setup UART interface */
-+	serdev_device_set_drvdata(serdev, mcu);
-+	serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops);
-+	ret = devm_serdev_device_open(dev, serdev);
-+	if (ret)
-+		return ret;
-+	serdev_device_set_baudrate(serdev, baud);
-+	serdev_device_set_flow_control(serdev, false);
-+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
-+	if (ret) {
-+		dev_err(dev, "Failed to set parity\n");
-+		return ret;
-+	}
-+
-+	ret = iei_wt61p803_puzzle_get_version(mcu);
-+	if (ret)
-+		return ret;
-+
-+	dev_dbg(dev, "MCU version: %s\n", mcu->version.version);
-+	dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info);
-+	dev_dbg(dev, "MCU in bootloader mode: %s\n",
-+		mcu->version.bootloader_mode ? "true" : "false");
-+	dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version);
-+
-+	if (device_property_read_bool(dev, "enable-beep")) {
-+		ret = iei_wt61p803_puzzle_buzzer(mcu, false);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu);
-+	if (ret)
-+		return ret;
-+
-+	return devm_of_platform_populate(dev);
-+}
-+
-+static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev)
-+{
-+	struct device *dev = &serdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
-+
-+	iei_wt61p803_puzzle_sysfs_remove(dev, mcu);
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = {
-+	{ .compatible = "iei,wt61p803-puzzle" },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids);
-+
-+static struct serdev_device_driver iei_wt61p803_puzzle_drv = {
-+	.probe			= iei_wt61p803_puzzle_probe,
-+	.remove			= iei_wt61p803_puzzle_remove,
-+	.driver = {
-+		.name		= "iei-wt61p803-puzzle",
-+		.of_match_table	= iei_wt61p803_puzzle_dt_ids,
-+	},
-+};
-+
-+module_serdev_device_driver(iei_wt61p803_puzzle_drv);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Luka Kovacic <[email protected]>");
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver");
---- /dev/null
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -0,0 +1,66 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/* IEI WT61P803 PUZZLE MCU Driver
-+ * System management microcontroller for fan control, temperature sensor reading,
-+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <[email protected]>
-+ */
-+
-+#ifndef _MFD_IEI_WT61P803_PUZZLE_H_
-+#define _MFD_IEI_WT61P803_PUZZLE_H_
-+
-+#define IEI_WT61P803_PUZZLE_BUF_SIZE 512
-+
-+/* Command magic numbers */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START		0x40 /* @ */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER	0x25 /* % */
-+#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM		0xF7
-+
-+#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK		0x30 /* 0 */
-+#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK	0x70
-+
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ		0xA1
-+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE		0xA0
-+
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION		0x56 /* V */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD		0x42 /* B */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE	0x4D /* M */
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER	0x30
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS		0x31
-+#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION	0x50 /* P */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE		0x43 /* C */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER		0x4F /* O */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS	0x53 /* S */
-+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
-+#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN			0x46 /* F */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ		0x5A /* Z */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE		0x57 /* W */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE		0x30
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE		0x41 /* A */
-+
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */
-+
-+struct iei_wt61p803_puzzle_mcu_version;
-+struct iei_wt61p803_puzzle_reply;
-+struct iei_wt61p803_puzzle;
-+
-+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
-+					       unsigned char *cmd, size_t size,
-+					       unsigned char *reply_data, size_t *reply_size,
-+					       int retry_count);
-+
-+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
-+				      unsigned char *cmd, size_t size,
-+				      unsigned char *reply_data, size_t *reply_size);
-+
-+#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */

target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch

@@ -1,501 +0,0 @@
-From e3310a638cd310bfd93dbbc6d2732ab6aea18dd2 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:34 +0000
-Subject: [PATCH 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
-
-Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
-control via PWM, reading fan speed and reading on-board temperature
-sensors.
-
-The driver registers a HWMON device and a simple thermal cooling device to
-enable in-kernel fan management.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Acked-by: Guenter Roeck <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- drivers/hwmon/Kconfig                     |   8 +
- drivers/hwmon/Makefile                    |   1 +
- drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++
- 3 files changed, 454 insertions(+)
- create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV
- 	  This driver can also be built as a module. If so, the module
- 	  will be called ibmpowernv.
- 
-+config SENSORS_IEI_WT61P803_PUZZLE_HWMON
-+	tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
-+	depends on MFD_IEI_WT61P803_PUZZLE
-+	help
-+	  The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
-+	  and writing fan PWM values. It also supports reading on-board
-+	  temperature sensors.
-+
- config SENSORS_IIO_HWMON
- 	tristate "Hwmon driver that uses channels specified via iio maps"
- 	depends on IIO
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130
- obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
- obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
- obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
-+obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
- obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
- obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
- obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
---- /dev/null
-+++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-@@ -0,0 +1,445 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU HWMON Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <[email protected]>
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/hwmon.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/math64.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM	2
-+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL	255
-+
-+/**
-+ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
-+ * @mcu_hwmon:		Parent driver struct pointer
-+ * @tcdev:		Thermal cooling device pointer
-+ * @name:		Thermal cooling device name
-+ * @pwm_channel:	Controlled PWM channel (0 or 1)
-+ * @cooling_levels:	Thermal cooling device cooling levels (DT)
-+ * @cur_level:		Current cooling level
-+ * @num_levels:	Number of cooling levels
-+ */
-+struct iei_wt61p803_puzzle_thermal_cooling_device {
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+	struct thermal_cooling_device *tcdev;
-+	char name[THERMAL_NAME_LENGTH];
-+	int pwm_channel;
-+	u32 *cooling_levels;
-+	int cur_level;
-+	u8 num_levels;
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
-+ * @mcu:				MCU struct pointer
-+ * @response_buffer			Global MCU response buffer
-+ * @thermal_cooling_dev_present:	Per-channel thermal cooling device control indicator
-+ * @cdev:				Per-channel thermal cooling device private structure
-+ */
-+struct iei_wt61p803_puzzle_hwmon {
-+	struct iei_wt61p803_puzzle *mcu;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+	struct iei_wt61p803_puzzle_thermal_cooling_device
-+		*cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
-+	struct mutex lock; /* mutex to protect response_buffer array */
-+};
-+
-+#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
-+static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char temp_sensor_ntc_cmd[4] = {
-+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
-+		IEI_WT61P803_PUZZLE_CMD_TEMP,
-+		IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
-+	};
-+	size_t reply_size;
-+	int ret;
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
-+						sizeof(temp_sensor_ntc_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 7) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	/* Check the number of NTC values */
-+	if (resp_buf[3] != '2') {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	*value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
-+static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+					      int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char fan_speed_cmd[4] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
-+						sizeof(fan_speed_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 7) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	*value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						 int channel, long pwm_set_val)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char pwm_set_cmd[6] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
-+	pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+	pwm_set_cmd[4] = pwm_set_val;
-+
-+	mutex_lock(&mcu_hwmon->lock);
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
-+						sizeof(pwm_set_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		goto exit;
-+
-+	if (reply_size != 3) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
-+		ret = -EIO;
-+		goto exit;
-+	}
-+exit:
-+	mutex_unlock(&mcu_hwmon->lock);
-+	return ret;
-+}
-+
-+static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
-+						int channel, long *value)
-+{
-+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
-+	unsigned char pwm_get_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
-+	pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
-+	pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
-+
-+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
-+						sizeof(pwm_get_cmd), resp_buf,
-+						&reply_size);
-+	if (ret)
-+		return ret;
-+
-+	if (reply_size != 5)
-+		return -EIO;
-+
-+	if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
-+		return -EIO;
-+
-+	*value = resp_buf[3];
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
-+				    u32 attr, int channel, long *val)
-+{
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+	switch (type) {
-+	case hwmon_pwm:
-+		return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
-+	case hwmon_fan:
-+		return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
-+	case hwmon_temp:
-+		return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
-+				     u32 attr, int channel, long val)
-+{
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
-+
-+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
-+}
-+
-+static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
-+					      u32 attr, int channel)
-+{
-+	const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
-+
-+	switch (type) {
-+	case hwmon_pwm:
-+		if (mcu_hwmon->thermal_cooling_dev_present[channel])
-+			return 0444;
-+		if (attr == hwmon_pwm_input)
-+			return 0644;
-+		break;
-+	case hwmon_fan:
-+		if (attr == hwmon_fan_input)
-+			return 0444;
-+		break;
-+	case hwmon_temp:
-+		if (attr == hwmon_temp_input)
-+			return 0444;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
-+	.is_visible = iei_wt61p803_puzzle_is_visible,
-+	.read = iei_wt61p803_puzzle_read,
-+	.write = iei_wt61p803_puzzle_write,
-+};
-+
-+static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
-+	HWMON_CHANNEL_INFO(pwm,
-+			   HWMON_PWM_INPUT,
-+			   HWMON_PWM_INPUT),
-+	HWMON_CHANNEL_INFO(fan,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT,
-+			   HWMON_F_INPUT),
-+	HWMON_CHANNEL_INFO(temp,
-+			   HWMON_T_INPUT,
-+			   HWMON_T_INPUT),
-+	NULL
-+};
-+
-+static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
-+	.ops = &iei_wt61p803_puzzle_hwmon_ops,
-+	.info = iei_wt61p803_puzzle_info,
-+};
-+
-+static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long *state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	*state = cdev->num_levels - 1;
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long *state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	if (cdev->cur_level < 0)
-+		return -EAGAIN;
-+
-+	*state = cdev->cur_level;
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
-+					     unsigned long state)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
-+	u8 pwm_level;
-+
-+	if (!cdev)
-+		return -EINVAL;
-+
-+	if (state >= cdev->num_levels)
-+		return -EINVAL;
-+
-+	if (state == cdev->cur_level)
-+		return 0;
-+
-+	cdev->cur_level = state;
-+	pwm_level = cdev->cooling_levels[state];
-+
-+	return iei_wt61p803_puzzle_write_pwm_channel(cdev->mcu_hwmon, cdev->pwm_channel, pwm_level);
-+}
-+
-+static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
-+	.get_max_state = iei_wt61p803_puzzle_get_max_state,
-+	.get_cur_state = iei_wt61p803_puzzle_get_cur_state,
-+	.set_cur_state = iei_wt61p803_puzzle_set_cur_state,
-+};
-+
-+static int
-+iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
-+					       struct fwnode_handle *child,
-+					       struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
-+{
-+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
-+	u32 pwm_channel;
-+	u8 num_levels;
-+	int i, ret;
-+
-+	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
-+	if (ret)
-+		return ret;
-+
-+	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
-+
-+	num_levels = fwnode_property_count_u32(child, "cooling-levels");
-+	if (!num_levels)
-+		return -EINVAL;
-+
-+	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
-+	if (!cdev)
-+		return -ENOMEM;
-+
-+	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u32), GFP_KERNEL);
-+	if (!cdev->cooling_levels)
-+		return -ENOMEM;
-+
-+	ret = fwnode_property_read_u32_array(child, "cooling-levels",
-+					     cdev->cooling_levels,
-+					     num_levels);
-+	if (ret) {
-+		dev_err(dev, "Couldn't read property 'cooling-levels'\n");
-+		return ret;
-+	}
-+
-+	for (i = 0; i < num_levels; i++) {
-+		if (cdev->cooling_levels[i] >
-+		    IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL) {
-+			dev_err(dev, "iei_wt61p803_fan state[%d]:%d > %d\n", i,
-+				cdev->cooling_levels[i],
-+				IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL);
-+			return -EINVAL;
-+		}
-+	}
-+
-+	cdev->mcu_hwmon = mcu_hwmon;
-+	cdev->pwm_channel = pwm_channel;
-+	cdev->num_levels = num_levels;
-+	cdev->cur_level = -1;
-+	mcu_hwmon->cdev[pwm_channel] = cdev;
-+
-+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
-+	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, to_of_node(child), cdev->name,
-+							      cdev, &iei_wt61p803_puzzle_cooling_ops);
-+	if (IS_ERR(cdev->tcdev))
-+		return PTR_ERR(cdev->tcdev);
-+
-+	return 0;
-+}
-+
-+static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
-+	struct fwnode_handle *child;
-+	struct device *hwmon_dev;
-+	int ret;
-+
-+	mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
-+	if (!mcu_hwmon)
-+		return -ENOMEM;
-+
-+	mcu_hwmon->mcu = mcu;
-+	platform_set_drvdata(pdev, mcu_hwmon);
-+	mutex_init(&mcu_hwmon->lock);
-+
-+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
-+							 mcu_hwmon,
-+							 &iei_wt61p803_puzzle_chip_info,
-+							 NULL);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+	/* Control fans via PWM lines via Linux Kernel */
-+	if (IS_ENABLED(CONFIG_THERMAL)) {
-+		device_for_each_child_node(dev, child) {
-+			ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
-+			if (ret) {
-+				dev_err(dev, "Enabling the PWM fan failed\n");
-+				fwnode_handle_put(child);
-+				return ret;
-+			}
-+		}
-+	}
-+	return 0;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
-+	{ .compatible = "iei,wt61p803-puzzle-hwmon" },
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
-+
-+static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
-+	.driver = {
-+		.name = "iei-wt61p803-puzzle-hwmon",
-+		.of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
-+	},
-+	.probe = iei_wt61p803_puzzle_hwmon_probe,
-+};
-+
-+module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
-+MODULE_AUTHOR("Luka Kovacic <[email protected]>");
-+MODULE_LICENSE("GPL v2");

target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch

@@ -1,207 +0,0 @@
-From f3b44eb69cc561cf05d00506dcec0dd9be003ed8 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:35 +0000
-Subject: [PATCH 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
-
-Add support for the IEI WT61P803 PUZZLE LED driver.
-Currently only the front panel power LED is supported,
-since it is the only LED on this board wired through the
-MCU.
-
-The LED is wired directly to the on-board MCU controller
-and is toggled using an MCU command.
-
-Support for more LEDs is going to be added in case more
-boards implement this microcontroller, as LEDs use many
-different GPIOs.
-
-This driver depends on the IEI WT61P803 PUZZLE MFD driver.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- drivers/leds/Kconfig                    |   8 ++
- drivers/leds/Makefile                   |   1 +
- drivers/leds/leds-iei-wt61p803-puzzle.c | 147 ++++++++++++++++++++++++
- 3 files changed, 156 insertions(+)
- create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -300,6 +300,14 @@ config LEDS_IPAQ_MICRO
- 	  Choose this option if you want to use the notification LED on
- 	  Compaq/HP iPAQ h3100 and h3600.
- 
-+config LEDS_IEI_WT61P803_PUZZLE
-+	tristate "LED Support for the IEI WT61P803 PUZZLE MCU"
-+	depends on LEDS_CLASS
-+	depends on MFD_IEI_WT61P803_PUZZLE
-+	help
-+	  This option enables support for LEDs controlled by the IEI WT61P803
-+	  M801 MCU.
-+
- config LEDS_HP6XX
- 	tristate "LED Support for the HP Jornada 6xx"
- 	depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_IP30)			+= leds-ip30.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
-+obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE)	+= leds-iei-wt61p803-puzzle.o
- obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
- obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
- obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
---- /dev/null
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -0,0 +1,147 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* IEI WT61P803 PUZZLE MCU LED Driver
-+ *
-+ * Copyright (C) 2020 Sartura Ltd.
-+ * Author: Luka Kovacic <[email protected]>
-+ */
-+
-+#include <linux/leds.h>
-+#include <linux/mfd/iei-wt61p803-puzzle.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/slab.h>
-+
-+enum iei_wt61p803_puzzle_led_state {
-+	IEI_LED_OFF = 0x30,
-+	IEI_LED_ON = 0x31,
-+	IEI_LED_BLINK_5HZ = 0x32,
-+	IEI_LED_BLINK_1HZ = 0x33,
-+};
-+
-+/**
-+ * struct iei_wt61p803_puzzle_led - MCU LED Driver
-+ * @cdev:		LED classdev
-+ * @mcu:		MCU struct pointer
-+ * @response_buffer	Global MCU response buffer
-+ * @lock:		General mutex lock to protect simultaneous R/W access to led_power_state
-+ * @led_power_state:	State of the front panel power LED
-+ */
-+struct iei_wt61p803_puzzle_led {
-+	struct led_classdev cdev;
-+	struct iei_wt61p803_puzzle *mcu;
-+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	struct mutex lock; /* mutex to protect led_power_state */
-+	int led_power_state;
-+};
-+
-+static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-+	(struct led_classdev *led_cdev)
-+{
-+	return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev);
-+}
-+
-+static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
-+							   enum led_brightness brightness)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	unsigned char *resp_buf = priv->response_buffer;
-+	unsigned char led_power_cmd[5] = {};
-+	size_t reply_size;
-+	int ret;
-+
-+	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
-+	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+
-+	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
-+						sizeof(led_power_cmd),
-+						resp_buf,
-+						&reply_size);
-+	if (ret)
-+		return ret;
-+
-+	if (reply_size != 3)
-+		return -EIO;
-+
-+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
-+		return -EIO;
-+
-+	mutex_lock(&priv->lock);
-+	priv->led_power_state = brightness;
-+	mutex_unlock(&priv->lock);
-+
-+	return 0;
-+}
-+
-+static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	int led_state;
-+
-+	mutex_lock(&priv->lock);
-+	led_state = priv->led_power_state;
-+	mutex_unlock(&priv->lock);
-+
-+	return led_state;
-+}
-+
-+static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
-+	struct iei_wt61p803_puzzle_led *priv;
-+	struct led_init_data init_data = {};
-+	struct fwnode_handle *child;
-+	int ret;
-+
-+	if (device_get_child_node_count(dev) != 1)
-+		return -EINVAL;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->mcu = mcu;
-+	priv->led_power_state = 1;
-+	mutex_init(&priv->lock);
-+	dev_set_drvdata(dev, priv);
-+
-+	child = device_get_next_child_node(dev, NULL);
-+	init_data.fwnode = child;
-+
-+	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+	priv->cdev.max_brightness = 1;
-+
-+	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+	if (ret)
-+		dev_err(dev, "Could not register LED\n");
-+
-+	fwnode_handle_put(child);
-+	return ret;
-+}
-+
-+static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = {
-+	{ .compatible = "iei,wt61p803-puzzle-leds" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match);
-+
-+static struct platform_driver iei_wt61p803_puzzle_led_driver = {
-+	.driver = {
-+		.name = "iei-wt61p803-puzzle-led",
-+		.of_match_table = iei_wt61p803_puzzle_led_of_match,
-+	},
-+	.probe = iei_wt61p803_puzzle_led_probe,
-+};
-+module_platform_driver(iei_wt61p803_puzzle_led_driver);
-+
-+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver");
-+MODULE_AUTHOR("Luka Kovacic <[email protected]>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle");

target/linux/mvebu/patches-6.1/905-Documentation-ABI-Add-iei-wt61p803-puzzle-driver-sys.patch

@@ -1,82 +0,0 @@
-From 2fab3b4956c5b2f83c1e1abffc1df39de2933d83 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:36 +0000
-Subject: [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs
- interface documentation
-
-Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
-monitoring and control of the microcontroller from user space.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- .../testing/sysfs-driver-iei-wt61p803-puzzle  | 61 +++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
-@@ -0,0 +1,61 @@
-+What:		/sys/bus/serial/devices/.../mac_address_*
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RW) Internal factory assigned MAC address values
-+
-+What:		/sys/bus/serial/devices/.../serial_number
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RW) Internal factory assigned serial number
-+
-+What:		/sys/bus/serial/devices/.../version
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Internal MCU firmware version
-+
-+What:		/sys/bus/serial/devices/.../protocol_version
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Internal MCU communication protocol version
-+
-+What:		/sys/bus/serial/devices/.../power_loss_recovery
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RW) Host platform power loss recovery settings
-+		Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
-+
-+What:		/sys/bus/serial/devices/.../bootloader_mode
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Internal MCU bootloader mode status
-+		Value mapping:
-+		0 - normal mode
-+		1 - bootloader mode
-+
-+What:		/sys/bus/serial/devices/.../power_status
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Power status indicates the host platform power on method.
-+		Value mapping (bitwise list):
-+		0x80 - Null
-+		0x40 - Firmware flag
-+		0x20 - Power loss detection flag (powered off)
-+		0x10 - Power loss detection flag (AC mode)
-+		0x08 - Button power on
-+		0x04 - Wake-on-LAN power on
-+		0x02 - RTC alarm power on
-+		0x01 - AC recover power on
-+
-+What:		/sys/bus/serial/devices/.../build_info
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Internal MCU firmware build date
-+		Format: yyyy/mm/dd hh:mm
-+
-+What:		/sys/bus/serial/devices/.../ac_recovery_status
-+Date:		September 2020
-+Contact:	Luka Kovacic <[email protected]>
-+Description:	(RO) Host platform AC recovery status value
-+		Value mapping:
-+		0 - board has not been recovered from power down
-+		1 - board has been recovered from power down

target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch

@@ -1,74 +0,0 @@
-From 0aff3e5923fecc6842473ad07a688d6e2f2c2d55 Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:37 +0000
-Subject: [PATCH 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver
- documentation
-
-Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 43 +++++++++++++++++++
- Documentation/hwmon/index.rst                 |  1 +
- 2 files changed, 44 insertions(+)
- create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-
---- /dev/null
-+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-@@ -0,0 +1,43 @@
-+.. SPDX-License-Identifier: GPL-2.0-only
-+
-+Kernel driver iei-wt61p803-puzzle-hwmon
-+=======================================
-+
-+Supported chips:
-+ * IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+   Prefix: 'iei-wt61p803-puzzle-hwmon'
-+
-+Author: Luka Kovacic <[email protected]>
-+
-+
-+Description
-+-----------
-+
-+This driver adds fan and temperature sensor reading for some IEI Puzzle
-+series boards.
-+
-+Sysfs attributes
-+----------------
-+
-+The following attributes are supported:
-+
-+- IEI WT61P803 PUZZLE for IEI Puzzle M801
-+
-+/sys files in hwmon subsystem
-+-----------------------------
-+
-+================= == =====================================================
-+fan[1-5]_input    RO files for fan speed (in RPM)
-+pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)
-+temp[1-2]_input   RO files for temperature sensors, in millidegree Celsius
-+================= == =====================================================
-+
-+/sys files in thermal subsystem
-+-------------------------------
-+
-+================= == =====================================================
-+cur_state         RW file for current cooling state of the cooling device
-+                     (0..max_state)
-+max_state         RO file for maximum cooling state of the cooling device
-+================= == =====================================================
---- a/Documentation/hwmon/index.rst
-+++ b/Documentation/hwmon/index.rst
-@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers
-    ibmaem
-    ibm-cffps
-    ibmpowernv
-+   iei-wt61p803-puzzle-hwmon
-    ina209
-    ina2xx
-    ina238

target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch

@@ -1,41 +0,0 @@
-From 12479baad28d2a08c6cb9e83471057635fa1635c Mon Sep 17 00:00:00 2001
-From: Luka Kovacic <luka.kovacic () sartura ! hr>
-Date: Tue, 24 Aug 2021 12:44:38 +0000
-Subject: [PATCH 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE
- driver
-
-Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers).
-
-Signed-off-by: Luka Kovacic <[email protected]>
-Signed-off-by: Pavo Banicevic <[email protected]>
-Cc: Luka Perkov <[email protected]>
-Cc: Robert Marko <[email protected]>
----
- MAINTAINERS | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -9900,6 +9900,22 @@ F:	include/net/nl802154.h
- F:	net/ieee802154/
- F:	net/mac802154/
- 
-+IEI WT61P803 M801 MFD DRIVER
-+M:	Luka Kovacic <[email protected]>
-+M:	Luka Perkov <[email protected]>
-+M:	Goran Medic <[email protected]>
-+L:	[email protected]
-+S:	Maintained
-+F:	Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
-+F:	Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
-+F:	Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
-+F:	Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
-+F:	Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
-+F:	drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
-+F:	drivers/leds/leds-iei-wt61p803-puzzle.c
-+F:	drivers/mfd/iei-wt61p803-puzzle.c
-+F:	include/linux/mfd/iei-wt61p803-puzzle.h
-+
- IFE PROTOCOL
- M:	Yotam Gigi <[email protected]>
- M:	Jamal Hadi Salim <[email protected]>

target/linux/mvebu/patches-6.1/910-drivers-leds-wt61p803-puzzle-improvements.patch

@@ -1,271 +0,0 @@
---- a/drivers/leds/leds-iei-wt61p803-puzzle.c
-+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
-@@ -9,9 +9,13 @@
- #include <linux/mfd/iei-wt61p803-puzzle.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
- #include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define IEI_LEDS_MAX		4
- 
- enum iei_wt61p803_puzzle_led_state {
- 	IEI_LED_OFF = 0x30,
-@@ -33,7 +37,11 @@ struct iei_wt61p803_puzzle_led {
- 	struct iei_wt61p803_puzzle *mcu;
- 	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
- 	struct mutex lock; /* mutex to protect led_power_state */
-+	struct work_struct work;
- 	int led_power_state;
-+	int id;
-+	u8 blinking;
-+	bool active_low;
- };
- 
- static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
-@@ -51,10 +59,18 @@ static int iei_wt61p803_puzzle_led_brigh
- 	size_t reply_size;
- 	int ret;
- 
-+	if (priv->blinking) {
-+		if (brightness == LED_OFF)
-+			priv->blinking = 0;
-+		else
-+			return 0;
-+	}
-+
- 	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
- 	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
--	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
--	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
-+	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+	led_power_cmd[3] = ((brightness == LED_OFF) ^ priv->active_low) ?
-+				IEI_LED_OFF : priv->blinking?priv->blinking:IEI_LED_ON;
- 
- 	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
- 						sizeof(led_power_cmd),
-@@ -90,39 +106,166 @@ static enum led_brightness iei_wt61p803_
- 	return led_state;
- }
- 
-+static void iei_wt61p803_puzzle_led_apply_blink(struct work_struct *work)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = container_of(work, struct iei_wt61p803_puzzle_led, work);
-+	unsigned char led_blink_cmd[5] = {};
-+	unsigned char resp_buf[IEI_WT61P803_PUZZLE_BUF_SIZE];
-+	size_t reply_size;
-+
-+	led_blink_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
-+	led_blink_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
-+	led_blink_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_SET(priv->id);
-+	led_blink_cmd[3] = priv->blinking;
-+
-+	iei_wt61p803_puzzle_write_command(priv->mcu, led_blink_cmd,
-+					  sizeof(led_blink_cmd),
-+					  resp_buf,
-+					  &reply_size);
-+
-+	return;
-+}
-+
-+static int iei_wt61p803_puzzle_led_set_blink(struct led_classdev *cdev,
-+					     unsigned long *delay_on,
-+					     unsigned long *delay_off)
-+{
-+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
-+	u8 blink_mode = 0;
-+	int ret = 0;
-+
-+	/* set defaults */
-+	if (!*delay_on && !*delay_off) {
-+		*delay_on = 500;
-+		*delay_off = 500;
-+	}
-+
-+	/* minimum delay for soft-driven blinking is 100ms to keep load low */
-+	if (*delay_on < 100)
-+		*delay_on = 100;
-+
-+	if (*delay_off < 100)
-+		*delay_off = 100;
-+
-+	/* offload blinking to hardware, if possible */
-+	if (*delay_on != *delay_off) {
-+		ret = -EINVAL;
-+	} else if (*delay_on == 100) {
-+		blink_mode = IEI_LED_BLINK_5HZ;
-+		*delay_on = 100;
-+		*delay_off = 100;
-+	} else if (*delay_on <= 500) {
-+		blink_mode = IEI_LED_BLINK_1HZ;
-+		*delay_on = 500;
-+		*delay_off = 500;
-+	} else {
-+		ret = -EINVAL;
-+	}
-+
-+	mutex_lock(&priv->lock);
-+	priv->blinking = blink_mode;
-+	mutex_unlock(&priv->lock);
-+
-+	if (blink_mode)
-+		schedule_work(&priv->work);
-+
-+	return ret;
-+}
-+
-+
-+static int iei_wt61p803_puzzle_led_set_dt_default(struct led_classdev *cdev,
-+				     struct device_node *np)
-+{
-+	const char *state;
-+	int ret = 0;
-+
-+	state = of_get_property(np, "default-state", NULL);
-+	if (state) {
-+		if (!strcmp(state, "on")) {
-+			ret =
-+			iei_wt61p803_puzzle_led_brightness_set_blocking(
-+				cdev, cdev->max_brightness);
-+		} else  {
-+			ret = iei_wt61p803_puzzle_led_brightness_set_blocking(
-+				cdev, LED_OFF);
-+		}
-+	}
-+
-+	return ret;
-+}
-+
- static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev_of_node(dev);
-+	struct device_node *child;
- 	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
- 	struct iei_wt61p803_puzzle_led *priv;
--	struct led_init_data init_data = {};
--	struct fwnode_handle *child;
- 	int ret;
-+	u32 reg;
- 
--	if (device_get_child_node_count(dev) != 1)
-+	if (device_get_child_node_count(dev) > IEI_LEDS_MAX)
- 		return -EINVAL;
- 
--	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	priv->mcu = mcu;
--	priv->led_power_state = 1;
--	mutex_init(&priv->lock);
--	dev_set_drvdata(dev, priv);
--
--	child = device_get_next_child_node(dev, NULL);
--	init_data.fwnode = child;
--
--	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
--	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
--	priv->cdev.max_brightness = 1;
-+	for_each_available_child_of_node(np, child) {
-+		struct led_init_data init_data = {};
- 
--	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
--	if (ret)
--		dev_err(dev, "Could not register LED\n");
-+		ret = of_property_read_u32(child, "reg", &reg);
-+		if (ret) {
-+			dev_err(dev, "Failed to read led 'reg' property\n");
-+			goto put_child_node;
-+		}
-+
-+		if (reg > IEI_LEDS_MAX) {
-+			dev_err(dev, "Invalid led reg %u\n", reg);
-+			ret = -EINVAL;
-+			goto put_child_node;
-+		}
-+
-+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+		if (!priv) {
-+			ret = -ENOMEM;
-+			goto put_child_node;
-+		}
-+
-+		mutex_init(&priv->lock);
-+
-+		dev_set_drvdata(dev, priv);
-+
-+		if (of_property_read_bool(child, "active-low"))
-+			priv->active_low = true;
-+
-+		priv->mcu = mcu;
-+		priv->id = reg;
-+		priv->led_power_state = 1;
-+		priv->blinking = 0;
-+		init_data.fwnode = of_fwnode_handle(child);
-+
-+		priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
-+		priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
-+		priv->cdev.blink_set = iei_wt61p803_puzzle_led_set_blink;
-+
-+		priv->cdev.max_brightness = 1;
-+
-+		INIT_WORK(&priv->work, iei_wt61p803_puzzle_led_apply_blink);
-+
-+		ret = iei_wt61p803_puzzle_led_set_dt_default(&priv->cdev, child);
-+		if (ret) {
-+			dev_err(dev, "Could apply default from DT\n");
-+			goto put_child_node;
-+		}
-+
-+		ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
-+		if (ret) {
-+			dev_err(dev, "Could not register LED\n");
-+			goto put_child_node;
-+		}
-+	}
-+
-+	return ret;
- 
--	fwnode_handle_put(child);
-+put_child_node:
-+	of_node_put(child);
- 	return ret;
- }
- 
---- a/include/linux/mfd/iei-wt61p803-puzzle.h
-+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
-@@ -36,7 +36,7 @@
- #define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
- 
- #define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
--#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
-+#define IEI_WT61P803_PUZZLE_CMD_LED_SET(n)		(0x30 | (n))
- 
- #define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
- #define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -176,6 +176,9 @@ static int iei_wt61p803_puzzle_recv_buf(
- 	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
- 	int ret;
- 
-+	print_hex_dump_debug("puzzle-mcu rx: ", DUMP_PREFIX_NONE,
-+			     16, 1, data, size, false);
-+
- 	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
- 	/* Return the number of processed bytes if function returns error,
- 	 * discard the remaining incoming data, since the frame this data
-@@ -246,6 +249,9 @@ int iei_wt61p803_puzzle_write_command(st
- 
- 	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
- 
-+	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
-+			     16, 1, cmd, size, false);
-+
- 	/* Initialize reply struct */
- 	reinit_completion(&mcu->reply->received);
- 	mcu->reply->size = 0;

target/linux/mvebu/patches-6.1/911-drivers-leds-wt61p803-puzzle-mcu-retry.patch

@@ -1,63 +0,0 @@
---- a/drivers/mfd/iei-wt61p803-puzzle.c
-+++ b/drivers/mfd/iei-wt61p803-puzzle.c
-@@ -241,6 +241,7 @@ int iei_wt61p803_puzzle_write_command(st
- {
- 	struct device *dev = &mcu->serdev->dev;
- 	int ret;
-+	int retries;
- 
- 	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
- 		return -EINVAL;
-@@ -252,24 +253,36 @@ int iei_wt61p803_puzzle_write_command(st
- 	print_hex_dump_debug("puzzle-mcu tx: ", DUMP_PREFIX_NONE,
- 			     16, 1, cmd, size, false);
- 
-+	retries = 3;
- 	/* Initialize reply struct */
--	reinit_completion(&mcu->reply->received);
--	mcu->reply->size = 0;
--	usleep_range(2000, 10000);
--	serdev_device_write_flush(mcu->serdev);
--	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
--	if (ret < 0)
--		goto exit;
--
--	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
--	ret = wait_for_completion_timeout(&mcu->reply->received,
--					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
--	if (ret == 0) {
--		dev_err(dev, "Command reply receive timeout\n");
--		ret = -ETIMEDOUT;
--		goto exit;
-+	while (retries) {
-+		reinit_completion(&mcu->reply->received);
-+		mcu->reply->size = 0;
-+		usleep_range(2000, 10000);
-+		serdev_device_write_flush(mcu->serdev);
-+		ret = serdev_device_write_buf(mcu->serdev, cmd, size);
-+		if (ret < 0)
-+			goto exit;
-+
-+		serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+		ret = wait_for_completion_timeout(&mcu->reply->received,
-+						  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
-+		retries--;
-+		if (ret == 0) {
-+			if (retries == 0) {
-+				dev_err(dev, "Command reply receive timeout\n");
-+				ret = -ETIMEDOUT;
-+				goto exit;
-+			}
-+		}
-+		else {
-+			if (mcu->reply->data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
-+				mcu->reply->data[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
-+				mcu->reply->data[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK) {
-+				break;
-+			}
-+		}
- 	}
--
- 	*reply_size = mcu->reply->size;
- 	/* Copy the received data, as it will not be available after a new frame is received */
- 	memcpy(reply_data, mcu->reply->data, mcu->reply->size);