initial support for Asus RT-N15

SVN-Revision: 17463

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -10,6 +10,7 @@
 
 enum ramips_mach_type {
 	RAMIPS_MACH_GENERIC,
+	RAMIPS_MACH_RT_N15,		/* Asus RT-N15 */
 	RAMIPS_MACH_WHR_G300N,		/* Buffalo WHR-G300N */
 };
 

target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig

@@ -2,6 +2,11 @@ if RALINK_RT288X
 
 menu "Ralink RT288x machine selection"
 
+config RT288X_MACH_RT_N15
+	bool "Asus RT-N15 board support"
+	default y
+	select RALINK_DEV_GPIO_LEDS
+
 endmenu
 
 endif

target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile

@@ -11,3 +11,5 @@
 obj-y	:= prom.o irq.o setup.o rt288x.o devices.o
 
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
+
+obj-$(CONFIG_RT288X_MACH_RT_N15)	+= mach-rt-n15.o

target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c

@@ -0,0 +1,82 @@
+/*
+ *  Asus RT-N15 board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev_gpio_leds.h>
+
+#include "devices.h"
+
+#define RT_N15_GPIO_LED_POWER		11
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition rt_n15_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "u-boot-env",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x0b0000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	}, {
+		.name	= "openwrt",
+		.offset	= 0x050000,
+		.size	= 0x3b0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data rt_n15_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(rt_n15_partitions),
+	.parts		= rt_n15_partitions,
+#endif
+};
+
+static struct gpio_led rt_n15_leds_gpio[] __initdata = {
+	{
+		.name		= "rt-n15:blue:power",
+		.gpio		= RT_N15_GPIO_LED_POWER,
+		.active_low	= 1,
+	}
+};
+
+static void __init rt_n15_init(void)
+{
+	rt288x_register_flash(0, &rt_n15_flash_data);
+
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio),
+				  rt_n15_leds_gpio);
+}
+
+MIPS_MACHINE(RAMIPS_MACH_RT_N15, "Asus RT-N15", rt_n15_init);

target/linux/ramips/rt288x/config-2.6.30

@@ -117,6 +117,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PROM_EMU is not set
 CONFIG_RALINK_RT288X=y
 # CONFIG_RALINK_RT305X is not set
+CONFIG_RT288X_MACH_RT_N15=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set