Inicio Explorar Ayuda
Iniciar sesión
OpenWrt
/
openwrt
espejo de https://github.com/openwrt/openwrt.git
2
0
Fork 0
Archivos Incidencias 0 Wiki

Sin descripción

Árbol: 552e298755
Ramas Etiquetas
openwrt
Gabor Juhos 552e298755 initial support for Asus RT-N15 hace 16 años
docs 254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) hace 16 años
include 5af113eb7c add support for build system overlays that alter package build instructions currently unused, will probably be managed by the feeds system later hace 16 años
package 291de07cb0 fix module loading with kernel 2.6.27 hace 16 años
scripts caf8074566 scripts/feeds: fix an error message hace 16 años
target 552e298755 initial support for Asus RT-N15 hace 16 años
toolchain 91fe363562 uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a hace 16 años
tools 8868aa88c8 build fixes for squashfs4 on cygwin hace 16 años
.gitignore 13189afcc9 add logs/ to .gitignore hace 17 años
BSDmakefile f30058fda2 add missing copyright header hace 19 años
Config.in e2f5de7a46 add menuconfig option for selecting initramfs compression hace 16 años
LICENSE 60c1f0f64d finally move buildroot-ng to trunk hace 10 años
Makefile 61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh hace 17 años
README adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh hace 17 años
feeds.conf.default aaa0278c46 switch to LuCI 0.9.x branch hace 16 años
rules.mk 2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages hace 16 años

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org