ipq40xx: GL-B1300: convert to new partitions layout

Alberto Bursi reported:
>The patch "ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300"
>prevents boot on my B1300. I compiled from latest sources.

The GL-B1300 was using the discouraged direct subnodes method to declare
the partitions on the flash.

|The partition table should be a subnode of the flash node and should be named
|'partitions'. This node should have the following property:
|- compatible : (required) must be "fixed-partitions"
|Partitions are then defined in subnodes of the partitions node.
|
|For backwards compatibility partitions as direct subnodes of the flash device are
|supported. This use is discouraged.
|NOTE: also for backwards compatibility, direct subnodes that have a compatible
|string are not considered partitions, as they may be used for other bindings.
<https://www.kernel.org/doc/Documentation/devicetree/bindings/mtd/partition.txt>

Hence, this patch converts the device to the "partitions" layout.

Fixes: 1cbe457cf94 ("ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300")
Reported-by: Alberto Bursi <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts

@@ -155,58 +155,64 @@
 		reg = <0>;
 		spi-max-frequency = <24000000>;
 
-		SBL1@0 {
-			label = "SBL1";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		MIBIB@40000 {
-			label = "MIBIB";
-			reg = <0x40000 0x20000>;
-			read-only;
-		};
-
-		QSEE@60000 {
-			label = "QSEE";
-			reg = <0x60000 0x60000>;
-			read-only;
-		};
-
-		CDT@c0000 {
-			label = "CDT";
-			reg = <0xc0000 0x10000>;
-			read-only;
-		};
-
-		DDRPARAMS@d0000 {
-			label = "DDRPARAMS";
-			reg = <0xd0000 0x10000>;
-			read-only;
-		};
-
-		APPSBLENV@e0000 {
-			label = "APPSBLENV";
-			reg = <0xe0000 0x10000>;
-			read-only;
-		};
-
-		APPSBL@f0000 {
-			label = "APPSBL";
-			reg = <0xf0000 0x80000>;
-			read-only;
-		};
-
-		ART@170000 {
-			label = "ART";
-			reg = <0x170000 0x10000>;
-			read-only;
-		};
-
-		firmware@180000 {
-			compatible = "denx,fit";
-			label = "firmware";
-			reg = <0x180000 0x1e80000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			SBL1@0 {
+				label = "SBL1";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			MIBIB@40000 {
+				label = "MIBIB";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+
+			QSEE@60000 {
+				label = "QSEE";
+				reg = <0x60000 0x60000>;
+				read-only;
+			};
+
+			CDT@c0000 {
+				label = "CDT";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+
+			DDRPARAMS@d0000 {
+				label = "DDRPARAMS";
+				reg = <0xd0000 0x10000>;
+				read-only;
+			};
+
+			APPSBLENV@e0000 {
+				label = "APPSBLENV";
+				reg = <0xe0000 0x10000>;
+				read-only;
+			};
+
+			APPSBL@f0000 {
+				label = "APPSBL";
+				reg = <0xf0000 0x80000>;
+				read-only;
+			};
+
+			ART@170000 {
+				label = "ART";
+				reg = <0x170000 0x10000>;
+				read-only;
+			};
+
+			firmware@180000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x180000 0x1e80000>;
+			};
 		};
 	};
 };