rtc-rv5c386a: add support for kernel 3.0

remove BKL and adds support for changes in bcm47xx code

SVN-Revision: 27903

package/rtc-rv5c386a/src/gpio.h

@@ -1,157 +0,0 @@
-#ifndef __DIAG_GPIO_H
-#define __DIAG_GPIO_H
-#include <linux/interrupt.h>
-
-#ifndef BCMDRIVER
-#include <linux/ssb/ssb_embedded.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
-#include <linux/gpio.h>
-#define ssb ssb_bcm47xx
-#endif
-extern struct ssb_bus ssb;
-
-
-static inline u32 gpio_in(void)
-{
-	return ssb_gpio_in(&ssb, ~0);
-}
-
-static inline u32 gpio_out(u32 mask, u32 value)
-{
-	return ssb_gpio_out(&ssb, mask, value);
-}
-
-static inline u32 gpio_outen(u32 mask, u32 value)
-{
-	return ssb_gpio_outen(&ssb, mask, value);
-}
-
-static inline u32 gpio_control(u32 mask, u32 value)
-{
-	return ssb_gpio_control(&ssb, mask, value);
-}
-
-static inline u32 gpio_setintmask(u32 mask, u32 value)
-{
-	return ssb_gpio_intmask(&ssb, mask, value);
-}
-
-static inline u32 gpio_intpolarity(u32 mask, u32 value)
-{
-	return ssb_gpio_polarity(&ssb, mask, value);
-}
-
-static inline u32 __ssb_write32_masked(struct ssb_device *dev, u16 offset,
-				       u32 mask, u32 value)
-{
-	value &= mask;
-	value |= ssb_read32(dev, offset) & ~mask;
-	ssb_write32(dev, offset, value);
-	return value;
-}
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
-{
-	int irq;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
-	irq = gpio_to_irq(0);
-	if (irq == -EINVAL) return;
-#else
-	if (ssb.chipco.dev)
-		irq = ssb_mips_irq(ssb.chipco.dev) + 2;
-	else if (ssb.extif.dev)
-		irq = ssb_mips_irq(ssb.extif.dev) + 2;
-	else return;
-#endif
-	
-	if (enabled) {
-		if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
-			return;
-	} else {
-		free_irq(irq, handler);
-	}
-
-	if (ssb.chipco.dev)
-		__ssb_write32_masked(ssb.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
-}
-
-#else
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-#include <sbmips.h>
-#else
-#include <hndcpu.h>
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-#endif
-
-extern void *sbh;
-extern spinlock_t sbh_lock;
-
-#define gpio_in()	sb_gpioin(sbh)
-#define gpio_out(mask, value) 	sb_gpioout(sbh, mask, ((value) & (mask)), GPIO_DRV_PRIORITY)
-#define gpio_outen(mask, value) 	sb_gpioouten(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_control(mask, value) 	sb_gpiocontrol(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_setintmask(mask, value) 	sb_gpiointmask(sbh, mask, value, GPIO_DRV_PRIORITY)
-#define gpio_intpolarity(mask, value) 	sb_gpiointpolarity(sbh, mask, value, GPIO_DRV_PRIORITY)
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *, struct pt_regs *))
-{
-	unsigned int coreidx;
-	unsigned long flags;
-	chipcregs_t *cc;
-	int irq;
-
-	spin_lock_irqsave(sbh_lock, flags);
-	coreidx = sb_coreidx(sbh);
-
-	irq = sb_irq(sbh) + 2;
-	if (enabled)
-		request_irq(irq, handler, SA_SHIRQ | SA_SAMPLE_RANDOM, "gpio", handler);
-	else
-		free_irq(irq, handler);
-
-	if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-		int intmask;
-
-		intmask = readl(&cc->intmask);
-		if (enabled)
-			intmask |= CI_GPIO;
-		else
-			intmask &= ~CI_GPIO;
-		writel(intmask, &cc->intmask);
-	}
-	sb_setcoreidx(sbh, coreidx);
-	spin_unlock_irqrestore(sbh_lock, flags);
-}
-
-#endif /* BCMDRIVER */
-
-#define EXTIF_ADDR 0x1f000000
-#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
-
-#define GPIO_TYPE_NORMAL	(0x0 << 24)
-#define GPIO_TYPE_EXTIF 	(0x1 << 24)
-#define GPIO_TYPE_MASK  	(0xf << 24)
-
-static inline void gpio_set_extif(int gpio, int value)
-{
-	volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (gpio & ~GPIO_TYPE_MASK);
-	if (value)
-		*addr = 0xFF;
-	else
-		*addr;
-}
-
-#endif /* __DIAG_GPIO_H */

package/rtc-rv5c386a/src/rtc.c

@@ -47,17 +47,20 @@
 #include <linux/miscdevice.h>
 #include <linux/ioport.h>
 #include <linux/fcntl.h>
+#include <linux/mc146818rtc.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/rtc.h>
 #include <linux/delay.h>
 #include <linux/version.h>
-#include <linux/smp_lock.h>
+#include <linux/gpio.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
+#include <asm/current.h>
 #include <asm/system.h>
 
-#include "gpio.h"
+#include <bcm47xx.h>
+#include <nvram.h>
 
 #define RTC_IS_OPEN		0x01	/* Means /dev/rtc is in use.  */
 
@@ -66,8 +69,6 @@ static int rtc_debug = 0;
 
 static unsigned long rtc_status = 0;	/* Bitmapped status byte.	*/
 
-static spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
-
 /* These settings are platform dependents.  */
 unsigned int sda_index = 0;
 unsigned int scl_index = 0;
@@ -98,11 +99,7 @@ MODULE_AUTHOR("Andreas Engel");
 MODULE_LICENSE("GPL");
 
 /* Test stolen from switch-adm.c.  */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
 module_param(rtc_debug, int, 0);
-#else
-MODULE_PARM(rtc_debug, "i");
-#endif
 
 static inline void sdalo(void)
 {
@@ -237,7 +234,7 @@ static int i2c_inb(int ack)
 static void i2c_init(void)
 {
     /* no gpio_control for EXTIF */
-	// gpio_control(sda_mask | scl_mask, 0);
+	// ssb_gpio_control(&ssb, sda_mask | scl_mask, 0);
 
    gpio_set_value(sda_index, 0);
    gpio_set_value(scl_index, 0);
@@ -308,6 +305,7 @@ static void get_rtc_time(struct rtc_time *rtc_tm)
 	 * Read date and time from the RTC. We use read method (3).
 	 */
 
+	spin_lock_irq(&rtc_lock);
 	i2c_start();
 	i2c_outb(RTC_I2C_ADDRESS | I2C_READ_MASK);
 	cr2             = i2c_inb(I2C_ACK);
@@ -319,6 +317,7 @@ static void get_rtc_time(struct rtc_time *rtc_tm)
 	rtc_tm->tm_mon  = i2c_inb(I2C_ACK);
 	rtc_tm->tm_year = i2c_inb(I2C_NAK);
 	i2c_stop();
+	spin_unlock_irq(&rtc_lock);
 
 	if (cr2 & RTC_VDET_MASK) {
 		printk(KERN_WARNING "***RTC BATTERY FAILURE***\n");
@@ -354,6 +353,7 @@ static void set_rtc_time(struct rtc_time *rtc_tm)
 		rtc_tm->tm_mon |= RTC_Y2K_MASK;
 	}
 
+	spin_lock_irq(&rtc_lock);
 	i2c_start();
 	i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
 	i2c_outb(0x00);	/* set starting register to 0 (=seconds) */
@@ -365,6 +365,7 @@ static void set_rtc_time(struct rtc_time *rtc_tm)
 	i2c_outb(rtc_tm->tm_mon);
 	i2c_outb(rtc_tm->tm_year);
 	i2c_stop();
+	spin_unlock_irq(&rtc_lock);
 }
 
 static ssize_t rtc_write(UNUSED struct file *filp, const char *buf,
@@ -495,9 +496,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg)
 static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret;
-	lock_kernel();
 	ret = rtc_do_ioctl(cmd, arg);
-	unlock_kernel();
 	return ret;
 }
 
@@ -518,27 +517,33 @@ static struct miscdevice rtc_dev = {
 };
 
 /* Savagely ripped from diag.c.  */
-extern char *nvram_get(char *str);
-#define getvar(str) (nvram_get(str)?:"")
 static inline int startswith (char *source, char *cmp)
-{	return !strncmp(source,cmp,strlen(cmp)); }
+{
+	return !strncmp(source, cmp, strlen(cmp));
+}
+
 static void platform_detect(void)
 {
-	char *buf;
+	char buf[20];
+	int et0phyaddr, et1phyaddr;
 
 	/* Based on "model_no".  */
-	if ((buf = nvram_get("model_no"))) {
-		if (startswith(buf,"WL700")) { /* WL700* */
+	if (nvram_getenv("model_no", buf, sizeof(buf)) >= 0) {
+		if (startswith(buf, "WL700")) { /* WL700* */
 			sda_index = 2;
 			scl_index = 5;
 			return;
 		}
 	}
 
-	if (startswith(getvar("hardware_version"), "WL300-")) {
+	if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 )
+		et0phyaddr = simple_strtoul(buf, NULL, 0);
+	if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 )
+		et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0) {
 		/* Either WL-300g or WL-HDD, do more extensive checks */
-		if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
-			 (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1)) {
+		if (startswith(buf, "WL300-") && et0phyaddr == 0 && et1phyaddr == 1) {
 			sda_index = 4;
 			scl_index = 5;
 			return;
@@ -563,19 +568,23 @@ static int __init rtc_init(void)
 	/*
 	 * Switch RTC to 24h mode
 	 */
+	spin_lock_irq(&rtc_lock);
 	i2c_start();
 	i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
 	i2c_outb(0xE4); /* start at address 0xE, transmission mode 4 */
 	cr1 = i2c_inb(I2C_NAK);
 	i2c_stop();
+	spin_unlock_irq(&rtc_lock);
 	if ((cr1 & RTC_24HOUR_MODE_MASK) == 0) {
 		/* RTC is running in 12h mode */
 		printk(KERN_INFO "rtc.o: switching to 24h mode\n");
+		spin_lock_irq(&rtc_lock);
 		i2c_start();
 		i2c_outb(RTC_I2C_ADDRESS | I2C_WRITE_MASK);
 		i2c_outb(0xE0);
 		i2c_outb(cr1 | RTC_24HOUR_MODE_MASK);
 		i2c_stop();
+		spin_unlock_irq(&rtc_lock);
 	}
 
 	misc_register(&rtc_dev);