ipq806x: ecw5410: use bootloader provided MAC-s

Currently, we are overriding the bootloader provided MAC-s as the ethernet
aliases are reversed so MAC-s were fixed up in userspace.
There is no need to do that as we can just fix the aliases instead and get
rid of MAC setting via userspace helper.

Fixes: 59f0a0f ("ipq806x: add Edgecore ECW5410 support")

Signed-off-by: Robert Marko <[email protected]>

target/linux/ipq806x/base-files/etc/board.d/02_network

@@ -29,8 +29,6 @@ tplink,vr2600v)
 	;;
 edgecore,ecw5410)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:art" 0x6)"
-	ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:art" 0x0)"
 	;;
 linksys,ea7500-v1)
 	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts

@@ -34,8 +34,8 @@
 
 	aliases {
 		serial1 = &gsbi1_serial;
-		ethernet0 = &gmac3;
-		ethernet1 = &gmac2;
+		ethernet0 = &gmac2;
+		ethernet1 = &gmac3;
 
 		led-boot = &led_power_green;
 		led-failsafe = &led_power_red;