mediatek: switch to fitblk for JDCloud RE-CP-03

Use the new fitblk driver.

Tested-By: Yangyu Chen <[email protected]>
Signed-off-by: Tianling Shen <[email protected]>

package/boot/uboot-envtools/files/mediatek_filogic

@@ -38,7 +38,8 @@ asus,rt-ax59u)
 	;;
 bananapi,bpi-r3|\
 bananapi,bpi-r3-mini|\
-bananapi,bpi-r4)
+bananapi,bpi-r4|\
+jdcloud,re-cp-03)
 	. /lib/upgrade/common.sh
 
 	bootdev="$(fitblk_get_bootdev)"
@@ -98,11 +99,6 @@ glinet,gl-mt6000)
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
-jdcloud,re-cp-03)
-	local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
-	ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
-	ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
-	;;
 mercusys,mr90x-v1|\
 routerich,ax3000)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")

package/boot/uboot-mediatek/patches/441-add-jdcloud_re-cp-03.patch

@@ -271,7 +271,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/mmcblk0p65
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootconf=config-1
 +bootdelay=0

target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts

@@ -23,7 +23,9 @@
 	};
 
 	chosen {
+		bootargs-override = "root=/dev/fit0 rootwait";
 		stdout-path = "serial0:115200n8";
+		rootdisk = <&emmc_rootdisk>;
 	};
 
 	memory@40000000 {
@@ -157,6 +159,20 @@
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	status = "okay";
+
+	card@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+
+		block {
+			compatible = "block-device";
+			partitions {
+				emmc_rootdisk: block-partition-production {
+					partname = "production";
+				};
+			};
+		};
+	};
 };
 
 &pio {

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -83,6 +83,7 @@ platform_do_upgrade() {
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
 	bananapi,bpi-r4|\
+	jdcloud,re-cp-03|\
 	tplink,tl-xdr4288|\
 	tplink,tl-xdr6086|\
 	tplink,tl-xdr6088|\
@@ -140,10 +141,6 @@ platform_do_upgrade() {
 		CI_KERNPART="fit"
 		nand_do_upgrade "$1"
 		;;
-	jdcloud,re-cp-03)
-		CI_KERNPART="production"
-		emmc_do_upgrade "$1"
-		;;
 	mercusys,mr90x-v1)
 		CI_UBIPART="ubi0"
 		nand_do_upgrade "$1"