|
|
@@ -1,332 +0,0 @@
|
|
|
-/*
|
|
|
- * Device Tree Include file for Traverse LS1043S board.
|
|
|
- *
|
|
|
- * Copyright 2014-2015, Freescale Semiconductor
|
|
|
- * Copyright 2017-2018, Traverse Technologies
|
|
|
- *
|
|
|
- * This file is dual-licensed: you can use it either under the terms
|
|
|
- * of the GPLv2 or the X11 license, at your option. Note that this dual
|
|
|
- * licensing only applies to this file, and not this project as a
|
|
|
- * whole.
|
|
|
- *
|
|
|
- * a) This library is free software; you can redistribute it and/or
|
|
|
- * modify it under the terms of the GNU General Public License as
|
|
|
- * published by the Free Software Foundation; either version 2 of the
|
|
|
- * License, or (at your option) any later version.
|
|
|
- *
|
|
|
- * This library is distributed in the hope that it will be useful,
|
|
|
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- * GNU General Public License for more details.
|
|
|
- *
|
|
|
- * Or, alternatively,
|
|
|
- *
|
|
|
- * b) Permission is hereby granted, free of charge, to any person
|
|
|
- * obtaining a copy of this software and associated documentation
|
|
|
- * files (the "Software"), to deal in the Software without
|
|
|
- * restriction, including without limitation the rights to use,
|
|
|
- * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
- * sell copies of the Software, and to permit persons to whom the
|
|
|
- * Software is furnished to do so, subject to the following
|
|
|
- * conditions:
|
|
|
- *
|
|
|
- * The above copyright notice and this permission notice shall be
|
|
|
- * included in all copies or substantial portions of the Software.
|
|
|
- *
|
|
|
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
|
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
|
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
|
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
- * OTHER DEALINGS IN THE SOFTWARE.
|
|
|
- */
|
|
|
-
|
|
|
-/dts-v1/;
|
|
|
-#include "fsl-ls1043a.dtsi"
|
|
|
-#include <dt-bindings/gpio/gpio.h>
|
|
|
-#include <dt-bindings/input/input.h>
|
|
|
-
|
|
|
-/ {
|
|
|
- model = "Traverse LS1043S";
|
|
|
- compatible = "traverse,ls1043s";
|
|
|
-
|
|
|
- aliases {
|
|
|
- crypto = &crypto;
|
|
|
- ethernet0 = &EMAC0;
|
|
|
- ethernet1 = &EMAC1;
|
|
|
- ethernet2 = &EMAC2;
|
|
|
- ethernet3 = &EMAC3;
|
|
|
- ethernet4 = &EMAC4;
|
|
|
- ethernet5 = &EMAC5;
|
|
|
- };
|
|
|
-
|
|
|
- leds {
|
|
|
- compatible = "gpio-leds";
|
|
|
- gpio0 {
|
|
|
- label = "ls1043s:green:user0";
|
|
|
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
|
|
- };
|
|
|
- gpio1 {
|
|
|
- label = "ls1043s:green:user1";
|
|
|
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
|
|
- };
|
|
|
- /* LED D17 */
|
|
|
- gpio2 {
|
|
|
- label = "ls1043s:green:wan";
|
|
|
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- gpio3 {
|
|
|
- label = "ls1043s:yellow:wan";
|
|
|
- gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- /* LED D18 */
|
|
|
- gpio4 {
|
|
|
- label = "ls1043s:green:mgmt";
|
|
|
- gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- gpio5 {
|
|
|
- label = "ls1043s:yellow:mgmt";
|
|
|
- gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- /* LED D6 */
|
|
|
- gpio6 {
|
|
|
- label = "ls1043s:green:user2";
|
|
|
- gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
|
|
- };
|
|
|
-
|
|
|
- /* SFP+ LEDs - these are for chassis
|
|
|
- * with lightpipes only
|
|
|
- */
|
|
|
- teng_act {
|
|
|
- label = "ls1043s:yellow:10gact";
|
|
|
- gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
-
|
|
|
- teng_link {
|
|
|
- label = "ls1043s:green:10glink";
|
|
|
- gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- keys {
|
|
|
- compatible = "gpio-keys-polled";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <0>;
|
|
|
- poll-interval = <1000>;
|
|
|
- /* This button may not be loaded on all boards */
|
|
|
- button@0 {
|
|
|
- label = "Front button";
|
|
|
- linux,code = <KEY_SETUP>;
|
|
|
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- /* This is wired to header S3 */
|
|
|
- button@1 {
|
|
|
- label = "Rear button";
|
|
|
- linux,code = <KEY_WPS_BUTTON>;
|
|
|
- gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
|
|
- };
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
-&esdhc {
|
|
|
- mmc-hs200-1_8v;
|
|
|
- sd-uhs-sdr104;
|
|
|
- sd-uhs-sdr50;
|
|
|
- sd-uhs-sdr25;
|
|
|
- sd-uhs-sdr12;
|
|
|
-};
|
|
|
-
|
|
|
-&i2c0 {
|
|
|
- status = "okay";
|
|
|
- rtc@6f {
|
|
|
- compatible = "intersil,isl1208";
|
|
|
- reg = <0x6f>;
|
|
|
- };
|
|
|
-
|
|
|
- sfp_pca9534: pca9534@24 {
|
|
|
- compatible = "ti,tca9534", "nxp,pca9534";
|
|
|
- gpio-controller;
|
|
|
- #gpio-cells = <2>;
|
|
|
- reg = <0x24>;
|
|
|
- gpio-base = <100>;
|
|
|
- };
|
|
|
-
|
|
|
- controller@50 {
|
|
|
- compatible = "traverse,controller";
|
|
|
- reg = <0x50>;
|
|
|
- };
|
|
|
-
|
|
|
- ds125df111@18 {
|
|
|
- compatible = "ti,ds125df111";
|
|
|
- reg = <0x18>;
|
|
|
- };
|
|
|
-
|
|
|
- emc1704@4c {
|
|
|
- compatible = "microchip,emc1704";
|
|
|
- reg = <0x4c>;
|
|
|
- };
|
|
|
-
|
|
|
- pac1934@16 {
|
|
|
- compatible = "microchip,pac1934";
|
|
|
- reg = <0x16>;
|
|
|
- /* Monitoring 3.3V, 5V, Vin/12V (voltage only), Vbat/RTC (voltage only) */
|
|
|
- shunt-resistors = <4000 12000 0 0>;
|
|
|
- };
|
|
|
-
|
|
|
- pmic@8 {
|
|
|
- compatible = "freescale,mc34vr500";
|
|
|
- reg = <0x08>;
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
-/* I2C Bus for SFP EEPROM and control
|
|
|
- * These are multiplexed so
|
|
|
- * they don't collide when loaded
|
|
|
- */
|
|
|
-&i2c3 {
|
|
|
- status = "okay";
|
|
|
- i2c-switch@70 {
|
|
|
- compatible = "nxp,pca9540";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <0>;
|
|
|
- reg = <0x70>;
|
|
|
-
|
|
|
- gigsfp_i2c: i2c@0 {
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <0>;
|
|
|
- reg = <0>;
|
|
|
- };
|
|
|
- tensfp_i2c: i2c@1 {
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <0>;
|
|
|
- reg = <1>;
|
|
|
- };
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
-&ifc {
|
|
|
- status = "okay";
|
|
|
- #address-cells = <2>;
|
|
|
- #size-cells = <1>;
|
|
|
- /* Only NAND flash is used on this board */
|
|
|
- ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
|
|
|
-
|
|
|
- nand@1,0 {
|
|
|
- compatible = "fsl,ifc-nand";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <1>;
|
|
|
- reg = <0x0 0x0 0x10000>;
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
-&duart0 {
|
|
|
- status = "okay";
|
|
|
-};
|
|
|
-
|
|
|
-&duart1 {
|
|
|
- status = "okay";
|
|
|
-};
|
|
|
-
|
|
|
-#include "fsl-ls1043-post.dtsi"
|
|
|
-
|
|
|
-&fman0 {
|
|
|
- EMAC0: ethernet@e0000 {
|
|
|
- phy-handle = <&qsgmii_phy1>;
|
|
|
- phy-connection-type = "qsgmii";
|
|
|
- local-mac-address = [0A 00 00 00 00 01];
|
|
|
- };
|
|
|
-
|
|
|
- EMAC1: ethernet@e2000 {
|
|
|
- phy-handle = <&qsgmii_phy2>;
|
|
|
- phy-connection-type = "qsgmii";
|
|
|
- local-mac-address = [0A 00 00 00 00 02];
|
|
|
- };
|
|
|
-
|
|
|
- EMAC2: ethernet@e8000 {
|
|
|
- phy-handle = <&qsgmii_phy3>;
|
|
|
- phy-connection-type = "qsgmii";
|
|
|
- local-mac-address = [0A 00 00 00 00 03];
|
|
|
- };
|
|
|
-
|
|
|
- EMAC3: ethernet@ea000 {
|
|
|
- phy-handle = <&qsgmii_phy4>;
|
|
|
- phy-connection-type = "qsgmii";
|
|
|
- local-mac-address = [0A 00 00 00 00 04];
|
|
|
- };
|
|
|
-
|
|
|
- /* SFP via AR8031
|
|
|
- * We treat this as a fixed-link as the
|
|
|
- * AR8031 is hard-configured into
|
|
|
- * 1000BASE-X mode
|
|
|
- * Should MII control be desired, remove
|
|
|
- * fixed-link and add
|
|
|
- * phy-handle = <&rgmii_phy1>;
|
|
|
- */
|
|
|
- EMAC4: ethernet@e4000 {
|
|
|
- phy-connection-type = "rgmii";
|
|
|
- local-mac-address = [0A 00 00 00 00 05];
|
|
|
- fixed-link {
|
|
|
- speed = <1000>;
|
|
|
- full-duplex;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- /* Connection to Expansion (M.2) slot
|
|
|
- * Future WAN (i.e xDSL) plugin
|
|
|
- */
|
|
|
- EMAC5: ethernet@e6000 {
|
|
|
- phy-connection-type = "rgmii-id";
|
|
|
- local-mac-address = [00 00 00 00 00 06];
|
|
|
- fixed-link {
|
|
|
- speed = <1000>;
|
|
|
- full-duplex;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- /* 10G SFP+ interface
|
|
|
- * This can also run at 1.25 and 2.5G with
|
|
|
- * the appropriate SerDes protocol setting in RCW
|
|
|
- */
|
|
|
- TENSFP: ethernet@f0000 {
|
|
|
- status = "okay";
|
|
|
- phy-connection-type = "xgmii";
|
|
|
- fixed-link {
|
|
|
- speed = <10000>;
|
|
|
- full-duplex;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- mdio@fc000 {
|
|
|
- rgmii_phy1: ethernet-phy@2 {
|
|
|
- reg = <0x2>;
|
|
|
- };
|
|
|
- qsgmii_phy1: ethernet-phy@4 {
|
|
|
- reg = <0x4>;
|
|
|
- };
|
|
|
- qsgmii_phy2: ethernet-phy@5 {
|
|
|
- reg = <0x5>;
|
|
|
- };
|
|
|
- qsgmii_phy3: ethernet-phy@6 {
|
|
|
- reg = <0x6>;
|
|
|
- };
|
|
|
- qsgmii_phy4: ethernet-phy@7 {
|
|
|
- reg = <0x7>;
|
|
|
- };
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
-/* No QUICC engine functions on this board -
|
|
|
- * pins are used for other functions (GPIO, I2C etc.)
|
|
|
- */
|
|
|
-&uqe {
|
|
|
- status = "disabled";
|
|
|
-};
|
|
|
-
|
|
|
-/* LS1043S does not use the QorIQ AHCI
|
|
|
- * controller.
|
|
|
- */
|
|
|
-&sata {
|
|
|
- status = "disabled";
|
|
|
-};
|
Mathew McBride