kernel: bump 4.14 to 4.14.99

Refreshed all patches.

Remove upstreamed:
- 950-0434-mmc-bcm2835-Recover-from-MMC_SEND_EXT_CSD.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <[email protected]>

include/kernel-version.mk

@@ -4,12 +4,12 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .134
 LINUX_VERSION-4.9 = .156
-LINUX_VERSION-4.14 = .98
+LINUX_VERSION-4.14 = .99
 LINUX_VERSION-4.19 = .20
 
 LINUX_KERNEL_HASH-3.18.134 = 36bdd04cab3b6c824a4b7e32ae02503f437e0916d5a4ff04c90aa22da2749c2f
 LINUX_KERNEL_HASH-4.9.156 = 5eb1b9ba43370512ab637452089bb93f8c0fdd7d5399e99561d382f74517a816
-LINUX_KERNEL_HASH-4.14.98 = 8f021171b1b1efb41326e603116a45126fc030d06aaa9b0784ae612323010c5f
+LINUX_KERNEL_HASH-4.14.99 = 8ff98caed5b20b733dedcbe99559d71a0e09e239c0c2488b3fd799c96489eb0a
 LINUX_KERNEL_HASH-4.19.20 = dc7d2776dad4bf738e741ed05e7d1bea685855cfb7a62d1706f5f7aeabfa04a4
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

target/linux/brcm2708/patches-4.14/950-0002-smsx95xx-fix-crimes-against-truesize.patch

@@ -25,7 +25,7 @@ Signed-off-by: Steve Glendinning <[email protected]>
  static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
  					    u32 *data, int in_pm)
  {
-@@ -1971,7 +1975,8 @@ static int smsc95xx_rx_fixup(struct usbn
+@@ -1972,7 +1976,8 @@ static int smsc95xx_rx_fixup(struct usbn
  				if (dev->net->features & NETIF_F_RXCSUM)
  					smsc95xx_rx_csum_offload(skb);
  				skb_trim(skb, skb->len - 4); /* remove fcs */
@@ -35,7 +35,7 @@ Signed-off-by: Steve Glendinning <[email protected]>
  
  				return 1;
  			}
-@@ -1989,7 +1994,8 @@ static int smsc95xx_rx_fixup(struct usbn
+@@ -1990,7 +1995,8 @@ static int smsc95xx_rx_fixup(struct usbn
  			if (dev->net->features & NETIF_F_RXCSUM)
  				smsc95xx_rx_csum_offload(ax_skb);
  			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */

target/linux/brcm2708/patches-4.14/950-0016-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -47,7 +47,7 @@ Signed-off-by: Noralf Trønnes <[email protected]>
  
  struct bcm2835_dmadev {
  	struct dma_device ddev;
-@@ -925,6 +927,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -905,6 +907,9 @@ static int bcm2835_dma_probe(struct plat
  	base = devm_ioremap_resource(&pdev->dev, res);
  	if (IS_ERR(base))
  		return PTR_ERR(base);
@@ -57,7 +57,7 @@ Signed-off-by: Noralf Trønnes <[email protected]>
  
  	od->base = base;
  
-@@ -962,6 +967,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -942,6 +947,9 @@ static int bcm2835_dma_probe(struct plat
  		goto err_no_dma;
  	}
  
@@ -67,7 +67,7 @@ Signed-off-by: Noralf Trønnes <[email protected]>
  	/* get irqs for each channel that we support */
  	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
  		/* skip masked out channels */
-@@ -1036,6 +1044,7 @@ static int bcm2835_dma_remove(struct pla
+@@ -1016,6 +1024,7 @@ static int bcm2835_dma_remove(struct pla
  {
  	struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
  
@@ -75,7 +75,7 @@ Signed-off-by: Noralf Trønnes <[email protected]>
  	dma_async_device_unregister(&od->ddev);
  	bcm2835_dma_free(od);
  
-@@ -1051,7 +1060,22 @@ static struct platform_driver bcm2835_dm
+@@ -1031,7 +1040,22 @@ static struct platform_driver bcm2835_dm
  	},
  };
  

target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch

@@ -841,7 +841,7 @@ Signed-off-by: Malik Olivier Boussejra <[email protected]>
  }
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -5084,7 +5084,7 @@ static void port_event(struct usb_hub *h
+@@ -5094,7 +5094,7 @@ static void port_event(struct usb_hub *h
  	if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
  		u16 status = 0, unused;
  

target/linux/brcm2708/patches-4.14/950-0056-fbdev-add-FBIOCOPYAREA-ioctl.patch

@@ -170,7 +170,7 @@ bcm2708_fb: Add ioctl for reading gpu memory through dma
  		platform_set_drvdata(dev, fb);
 --- a/drivers/video/fbdev/core/fbmem.c
 +++ b/drivers/video/fbdev/core/fbmem.c
-@@ -1086,6 +1086,31 @@ fb_blank(struct fb_info *info, int blank
+@@ -1090,6 +1090,31 @@ fb_blank(struct fb_info *info, int blank
  }
  EXPORT_SYMBOL(fb_blank);
  
@@ -202,7 +202,7 @@ bcm2708_fb: Add ioctl for reading gpu memory through dma
  static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
  			unsigned long arg)
  {
-@@ -1096,6 +1121,7 @@ static long do_fb_ioctl(struct fb_info *
+@@ -1100,6 +1125,7 @@ static long do_fb_ioctl(struct fb_info *
  	struct fb_cmap cmap_from;
  	struct fb_cmap_user cmap;
  	struct fb_event event;
@@ -210,7 +210,7 @@ bcm2708_fb: Add ioctl for reading gpu memory through dma
  	void __user *argp = (void __user *)arg;
  	long ret = 0;
  
-@@ -1213,6 +1239,15 @@ static long do_fb_ioctl(struct fb_info *
+@@ -1217,6 +1243,15 @@ static long do_fb_ioctl(struct fb_info *
  		unlock_fb_info(info);
  		console_unlock();
  		break;
@@ -226,7 +226,7 @@ bcm2708_fb: Add ioctl for reading gpu memory through dma
  	default:
  		if (!lock_fb_info(info))
  			return -ENODEV;
-@@ -1358,6 +1393,7 @@ static long fb_compat_ioctl(struct file
+@@ -1362,6 +1397,7 @@ static long fb_compat_ioctl(struct file
  	case FBIOPAN_DISPLAY:
  	case FBIOGET_CON2FBMAP:
  	case FBIOPUT_CON2FBMAP:

target/linux/brcm2708/patches-4.14/950-0131-drm-vc4-Fix-pitch-setup-for-T-format-scanout.patch

@@ -16,7 +16,7 @@ Fixes: 98830d91da08 ("drm/vc4: Add T-format scanout support.")
 
 --- a/drivers/gpu/drm/vc4/vc4_plane.c
 +++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -547,14 +547,24 @@ static int vc4_plane_mode_set(struct drm
+@@ -549,14 +549,24 @@ static int vc4_plane_mode_set(struct drm
  		tiling = SCALER_CTL0_TILING_LINEAR;
  		pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH);
  		break;

target/linux/brcm2708/patches-4.14/950-0174-drm-vc4-Add-the-DRM_IOCTL_VC4_GEM_MADVISE-ioctl.patch

@@ -778,7 +778,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris.
  #include "vc4_drv.h"
  #include "vc4_regs.h"
  
-@@ -777,21 +778,40 @@ static int vc4_prepare_fb(struct drm_pla
+@@ -779,21 +780,40 @@ static int vc4_prepare_fb(struct drm_pla
  {
  	struct vc4_bo *bo;
  	struct dma_fence *fence;

target/linux/brcm2708/patches-4.14/950-0181-drm-vc4-Use-.pixel_order-instead-of-custom-.flip_cbc.patch

@@ -66,7 +66,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7
  	},
  };
  
-@@ -625,15 +628,8 @@ static int vc4_plane_mode_set(struct drm
+@@ -627,15 +630,8 @@ static int vc4_plane_mode_set(struct drm
  	 * The pointers may be any byte address.
  	 */
  	vc4_state->ptr0_offset = vc4_state->dlist_count;

target/linux/brcm2708/patches-4.14/950-0344-drm-vc4-Set-premultiplied-for-alpha-formats.patch

@@ -22,7 +22,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-2-git-send-
 
 --- a/drivers/gpu/drm/vc4/vc4_plane.c
 +++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -619,13 +619,14 @@ static int vc4_plane_mode_set(struct drm
+@@ -621,13 +621,14 @@ static int vc4_plane_mode_set(struct drm
  					      SCALER_POS1_SCL_HEIGHT));
  	}
  

target/linux/brcm2708/patches-4.14/950-0345-drm-vc4-Check-if-plane-requires-background-fill.patch

@@ -36,7 +36,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-3-git-send-
  };
  
  static inline struct vc4_plane_state *
-@@ -522,6 +528,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -524,6 +530,7 @@ static int vc4_plane_mode_set(struct drm
  	u32 ctl0_offset = vc4_state->dlist_count;
  	const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
  	int num_planes = drm_format_num_planes(format->drm);
@@ -44,7 +44,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-3-git-send-
  	u32 scl0, scl1, pitch0;
  	u32 lbm_size, tiling;
  	unsigned long irqflags;
-@@ -705,6 +712,16 @@ static int vc4_plane_mode_set(struct drm
+@@ -707,6 +714,16 @@ static int vc4_plane_mode_set(struct drm
  	vc4_state->dlist[ctl0_offset] |=
  		VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
  

target/linux/brcm2708/patches-4.14/950-0354-drm-vc4-Advertise-supported-modifiers-for-planes.patch

@@ -33,7 +33,7 @@ Link: https://patchwork.freedesktop.org/patch/170828/
  
 --- a/drivers/gpu/drm/vc4/vc4_plane.c
 +++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -868,6 +868,32 @@ out:
+@@ -870,6 +870,32 @@ out:
  					      ctx);
  }
  
@@ -66,7 +66,7 @@ Link: https://patchwork.freedesktop.org/patch/170828/
  static const struct drm_plane_funcs vc4_plane_funcs = {
  	.update_plane = vc4_update_plane,
  	.disable_plane = drm_atomic_helper_disable_plane,
-@@ -876,6 +902,7 @@ static const struct drm_plane_funcs vc4_
+@@ -878,6 +904,7 @@ static const struct drm_plane_funcs vc4_
  	.reset = vc4_plane_reset,
  	.atomic_duplicate_state = vc4_plane_duplicate_state,
  	.atomic_destroy_state = vc4_plane_destroy_state,
@@ -74,7 +74,7 @@ Link: https://patchwork.freedesktop.org/patch/170828/
  };
  
  struct drm_plane *vc4_plane_init(struct drm_device *dev,
-@@ -887,6 +914,11 @@ struct drm_plane *vc4_plane_init(struct
+@@ -889,6 +916,11 @@ struct drm_plane *vc4_plane_init(struct
  	u32 num_formats = 0;
  	int ret = 0;
  	unsigned i;
@@ -86,7 +86,7 @@ Link: https://patchwork.freedesktop.org/patch/170828/
  
  	vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane),
  				 GFP_KERNEL);
-@@ -907,7 +939,7 @@ struct drm_plane *vc4_plane_init(struct
+@@ -909,7 +941,7 @@ struct drm_plane *vc4_plane_init(struct
  	ret = drm_universal_plane_init(dev, plane, 0,
  				       &vc4_plane_funcs,
  				       formats, num_formats,

target/linux/brcm2708/patches-4.14/950-0356-drm-vc4-Add-missing-formats-to-vc4_format_mod_suppor.patch

@@ -21,7 +21,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-2-eric@
 
 --- a/drivers/gpu/drm/vc4/vc4_plane.c
 +++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -888,7 +888,9 @@ static bool vc4_format_mod_supported(str
+@@ -890,7 +890,9 @@ static bool vc4_format_mod_supported(str
  	case DRM_FORMAT_YUV420:
  	case DRM_FORMAT_YVU420:
  	case DRM_FORMAT_NV12:

target/linux/brcm2708/patches-4.14/950-0357-drm-vc4-Add-support-for-SAND-modifier.patch

@@ -32,7 +32,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
 
 --- a/drivers/gpu/drm/vc4/vc4_plane.c
 +++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -467,11 +467,13 @@ static int vc4_plane_mode_set(struct drm
+@@ -469,11 +469,13 @@ static int vc4_plane_mode_set(struct drm
  	struct drm_framebuffer *fb = state->fb;
  	u32 ctl0_offset = vc4_state->dlist_count;
  	const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
@@ -46,7 +46,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  	int ret, i;
  
  	ret = vc4_plane_setup_clipping_and_scaling(state);
-@@ -511,7 +513,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -513,7 +515,7 @@ static int vc4_plane_mode_set(struct drm
  		scl1 = vc4_get_scl_field(state, 0);
  	}
  
@@ -55,7 +55,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  	case DRM_FORMAT_MOD_LINEAR:
  		tiling = SCALER_CTL0_TILING_LINEAR;
  		pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH);
-@@ -534,6 +536,49 @@ static int vc4_plane_mode_set(struct drm
+@@ -536,6 +538,49 @@ static int vc4_plane_mode_set(struct drm
  		break;
  	}
  
@@ -105,7 +105,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  	default:
  		DRM_DEBUG_KMS("Unsupported FB tiling flag 0x%16llx",
  			      (long long)fb->modifier);
-@@ -544,7 +589,7 @@ static int vc4_plane_mode_set(struct drm
+@@ -546,7 +591,7 @@ static int vc4_plane_mode_set(struct drm
  	vc4_dlist_write(vc4_state,
  			SCALER_CTL0_VALID |
  			(format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
@@ -114,7 +114,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  			VC4_SET_FIELD(tiling, SCALER_CTL0_TILING) |
  			(vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
  			VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
-@@ -598,8 +643,13 @@ static int vc4_plane_mode_set(struct drm
+@@ -600,8 +645,13 @@ static int vc4_plane_mode_set(struct drm
  
  	/* Pitch word 1/2 */
  	for (i = 1; i < num_planes; i++) {
@@ -130,7 +130,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  	}
  
  	/* Colorspace conversion words */
-@@ -882,13 +932,30 @@ static bool vc4_format_mod_supported(str
+@@ -884,13 +934,30 @@ static bool vc4_format_mod_supported(str
  	case DRM_FORMAT_BGR565:
  	case DRM_FORMAT_ARGB1555:
  	case DRM_FORMAT_XRGB1555:
@@ -164,7 +164,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@
  	case DRM_FORMAT_NV16:
  	case DRM_FORMAT_NV61:
  	default:
-@@ -918,6 +985,9 @@ struct drm_plane *vc4_plane_init(struct
+@@ -920,6 +987,9 @@ struct drm_plane *vc4_plane_init(struct
  	unsigned i;
  	static const uint64_t modifiers[] = {
  		DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED,

target/linux/brcm2708/patches-4.14/950-0434-mmc-bcm2835-Recover-from-MMC_SEND_EXT_CSD.patch

@@ -1,50 +0,0 @@
-From c2eae29f6503cf29ac6a204c51132cfed33d203e Mon Sep 17 00:00:00 2001
-From: Phil Elwell <[email protected]>
-Date: Fri, 26 Oct 2018 17:40:44 +0100
-Subject: [PATCH 434/454] mmc/bcm2835: Recover from MMC_SEND_EXT_CSD
-
-If the user issues an "mmc extcsd read", the SD controller receives
-what it thinks is a SEND_IF_COND command with an unexpected data block.
-The resulting operations leave the FSM stuck in READWAIT, a state which
-persists until the MMC framework resets the controller, by which point
-the root filesystem is likely to have been unmounted.
-
-A less heavyweight solution is to detect the condition and nudge the
-FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.
-
-N.B. This workaround was essentially discovered by accident and without
-a full understanding the inner workings of the controller, so it is
-fortunate that the "fix" only modifies error paths.
-
-See: https://github.com/raspberrypi/linux/issues/2728
-
-Signed-off-by: Phil Elwell <[email protected]>
----
- drivers/mmc/host/bcm2835.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/mmc/host/bcm2835.c
-+++ b/drivers/mmc/host/bcm2835.c
-@@ -772,6 +772,8 @@ static void bcm2835_finish_command(struc
- 
- 		if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
- 		    (host->cmd->opcode != MMC_SEND_OP_COND)) {
-+			u32 edm, fsm;
-+
- 			if (sdhsts & SDHSTS_CMD_TIME_OUT) {
- 				host->cmd->error = -ETIMEDOUT;
- 			} else {
-@@ -780,6 +782,13 @@ static void bcm2835_finish_command(struc
- 				bcm2835_dumpregs(host);
- 				host->cmd->error = -EILSEQ;
- 			}
-+			edm = readl(host->ioaddr + SDEDM);
-+			fsm = edm & SDEDM_FSM_MASK;
-+			if (fsm == SDEDM_FSM_READWAIT ||
-+			    fsm == SDEDM_FSM_WRITESTART1)
-+				/* Kick the FSM out of its wait */
-+				writel(edm | SDEDM_FORCE_DATA_MODE,
-+				       host->ioaddr + SDEDM);
- 			bcm2835_finish_request(host);
- 			return;
- 		}

target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch

@@ -94,7 +94,7 @@ Signed-off-by: Linus Walleij <[email protected]>
  			/* 32MB of flash */
  			reg = <0x30000000 0x02000000>;
  
-@@ -242,5 +292,16 @@
+@@ -238,5 +288,16 @@
  		ata@63000000 {
  			status = "okay";
  		};

target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch

@@ -26,7 +26,7 @@ the patch is only included in the series for context.
 
 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
 +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -303,5 +303,13 @@
+@@ -299,5 +299,13 @@
  				};
  			};
  		};

target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch

@@ -13,7 +13,7 @@
  	leds {
  		compatible = "gpio-leds";
  		led-wps {
-@@ -249,6 +255,47 @@
+@@ -245,6 +251,47 @@
  						groups = "gpio1bgrp";
  					};
  				};
@@ -61,7 +61,7 @@
  			};
  		};
  
-@@ -290,6 +337,18 @@
+@@ -286,6 +333,18 @@
  				<0x6000 0 0 4 &pci_intc 2>;
  		};
  

target/linux/generic/hack-4.14/204-module_strip.patch

@@ -114,7 +114,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  config MODULES_TREE_LOOKUP
 --- a/kernel/module.c
 +++ b/kernel/module.c
-@@ -3006,9 +3006,11 @@ static struct module *setup_load_info(st
+@@ -3008,9 +3008,11 @@ static struct module *setup_load_info(st
  
  static int check_modinfo(struct module *mod, struct load_info *info, int flags)
  {
@@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
  		modmagic = NULL;
  
-@@ -3029,6 +3031,7 @@ static int check_modinfo(struct module *
+@@ -3031,6 +3033,7 @@ static int check_modinfo(struct module *
  				mod->name);
  		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
  	}
@@ -137,7 +137,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
 --- a/scripts/mod/modpost.c
 +++ b/scripts/mod/modpost.c
-@@ -1982,7 +1982,9 @@ static void read_symbols(char *modname)
+@@ -1984,7 +1984,9 @@ static void read_symbols(char *modname)
  		symname = remove_dot(info.strtab + sym->st_name);
  
  		handle_modversions(mod, &info, sym, symname);
@@ -147,7 +147,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	}
  	if (!is_vmlinux(modname) ||
  	     (is_vmlinux(modname) && vmlinux_section_warnings))
-@@ -2143,8 +2145,10 @@ static void add_header(struct buffer *b,
+@@ -2145,8 +2147,10 @@ static void add_header(struct buffer *b,
  	buf_printf(b, "#include <linux/vermagic.h>\n");
  	buf_printf(b, "#include <linux/compiler.h>\n");
  	buf_printf(b, "\n");
@@ -158,7 +158,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	buf_printf(b, "\n");
  	buf_printf(b, "__visible struct module __this_module\n");
  	buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-@@ -2161,8 +2165,10 @@ static void add_header(struct buffer *b,
+@@ -2163,8 +2167,10 @@ static void add_header(struct buffer *b,
  
  static void add_intree_flag(struct buffer *b, int is_intree)
  {
@@ -169,7 +169,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  }
  
  /* Cannot check for assembler */
-@@ -2175,10 +2181,12 @@ static void add_retpoline(struct buffer
+@@ -2177,10 +2183,12 @@ static void add_retpoline(struct buffer
  
  static void add_staging_flag(struct buffer *b, const char *name)
  {
@@ -182,7 +182,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  }
  
  /**
-@@ -2277,11 +2285,13 @@ static void add_depends(struct buffer *b
+@@ -2279,11 +2287,13 @@ static void add_depends(struct buffer *b
  
  static void add_srcversion(struct buffer *b, struct module *mod)
  {
@@ -196,7 +196,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  }
  
  static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2518,7 +2528,9 @@ int main(int argc, char **argv)
+@@ -2520,7 +2530,9 @@ int main(int argc, char **argv)
  		add_staging_flag(&buf, mod->name);
  		err |= add_versions(&buf, mod);
  		add_depends(&buf, mod, modules);

target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch

@@ -10,7 +10,7 @@ Signed-off-by: Georgi Djakov <[email protected]>
 
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
-@@ -1277,11 +1277,13 @@ struct opp_table *dev_pm_opp_set_regulat
+@@ -1280,11 +1280,13 @@ struct opp_table *dev_pm_opp_set_regulat
  	if (!opp_table)
  		return ERR_PTR(-ENOMEM);
  

target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch

@@ -27,7 +27,7 @@ Signed-off-by: Georgi Djakov <[email protected]>
 
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
-@@ -1605,6 +1605,83 @@ put_table:
+@@ -1608,6 +1608,83 @@ put_table:
  }
  
  /**

target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch

@@ -17,7 +17,7 @@ Signed-off-by: Georgi Djakov <[email protected]>
 
 --- a/drivers/base/power/opp/core.c
 +++ b/drivers/base/power/opp/core.c
-@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
+@@ -1652,6 +1652,7 @@ int dev_pm_opp_adjust_voltage(struct dev
  	struct opp_table *opp_table;
  	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
  	int r = 0;
@@ -25,7 +25,7 @@ Signed-off-by: Georgi Djakov <[email protected]>
  
  	/* keep the node allocated */
  	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
-@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
+@@ -1688,6 +1689,10 @@ int dev_pm_opp_adjust_voltage(struct dev
  
  	/* plug in new node */
  	new_opp->supplies[0].u_volt = u_volt;

target/linux/layerscape/patches-4.14/301-arch-support-layerscape.patch

@@ -247,7 +247,7 @@ Signed-off-by: Biwen Li <[email protected]>
  /*
 --- a/arch/arm64/include/asm/io.h
 +++ b/arch/arm64/include/asm/io.h
-@@ -170,6 +170,7 @@ extern void __iomem *ioremap_cache(phys_
+@@ -186,6 +186,7 @@ extern void __iomem *ioremap_cache(phys_
  #define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
  #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
  #define ioremap_wt(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))

target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch

@@ -62,7 +62,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
   - snps,hird-threshold: HIRD threshold
 --- a/arch/arm64/include/asm/io.h
 +++ b/arch/arm64/include/asm/io.h
-@@ -194,6 +194,34 @@ extern void __iomem *ioremap_cache(phys_
+@@ -210,6 +210,34 @@ extern void __iomem *ioremap_cache(phys_
  #define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
  #define iowrite64be(v,p)	({ __iowmb(); __raw_writeq((__force __u64)cpu_to_be64(v), p); })
  
@@ -432,7 +432,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  		reg &= ~DWC3_DCTL_INITU2ENA;
 --- a/drivers/usb/dwc3/gadget.c
 +++ b/drivers/usb/dwc3/gadget.c
-@@ -3205,6 +3205,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3209,6 +3209,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
  {
  	int ret;
  	int irq;
@@ -440,7 +440,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  
  	irq = dwc3_gadget_get_irq(dwc);
  	if (irq < 0) {
-@@ -3281,6 +3282,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3285,6 +3286,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
  		goto err4;
  	}
  

target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch

@@ -69,7 +69,7 @@ Signed-off-by: Biwen Li <[email protected]>
  };
  
  /**
-@@ -498,6 +543,7 @@ static void esdhc_of_set_clock(struct sd
+@@ -502,6 +547,7 @@ static void esdhc_of_set_clock(struct sd
  	int pre_div = 1;
  	int div = 1;
  	ktime_t timeout;
@@ -77,7 +77,7 @@ Signed-off-by: Biwen Li <[email protected]>
  	u32 temp;
  
  	host->mmc->actual_clock = 0;
-@@ -511,27 +557,14 @@ static void esdhc_of_set_clock(struct sd
+@@ -515,27 +561,14 @@ static void esdhc_of_set_clock(struct sd
  	if (esdhc->vendor_ver < VENDOR_V_23)
  		pre_div = 2;
  
@@ -112,7 +112,7 @@ Signed-off-by: Biwen Li <[email protected]>
  
  	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
  	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
-@@ -789,6 +822,7 @@ static struct soc_device_attribute soc_i
+@@ -797,6 +830,7 @@ static struct soc_device_attribute soc_i
  
  static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
  {
@@ -120,7 +120,7 @@ Signed-off-by: Biwen Li <[email protected]>
  	struct sdhci_pltfm_host *pltfm_host;
  	struct sdhci_esdhc *esdhc;
  	struct device_node *np;
-@@ -808,6 +842,9 @@ static void esdhc_init(struct platform_d
+@@ -816,6 +850,9 @@ static void esdhc_init(struct platform_d
  	else
  		esdhc->quirk_incorrect_hostver = false;
  
@@ -130,7 +130,7 @@ Signed-off-by: Biwen Li <[email protected]>
  	np = pdev->dev.of_node;
  	clk = of_clk_get(np, 0);
  	if (!IS_ERR(clk)) {
-@@ -907,14 +944,6 @@ static int sdhci_esdhc_probe(struct plat
+@@ -915,14 +952,6 @@ static int sdhci_esdhc_probe(struct plat
  	return ret;
  }
  

target/linux/layerscape/patches-4.14/821-smmu-support-layerscape.patch

@@ -93,7 +93,7 @@ Signed-off-by: Biwen Li <[email protected]>
  
  #include "io-pgtable.h"
  #include "arm-smmu-regs.h"
-@@ -1464,6 +1465,8 @@ static struct iommu_group *arm_smmu_devi
+@@ -1465,6 +1466,8 @@ static struct iommu_group *arm_smmu_devi
  
  	if (dev_is_pci(dev))
  		group = pci_device_group(dev);
@@ -102,7 +102,7 @@ Signed-off-by: Biwen Li <[email protected]>
  	else
  		group = generic_device_group(dev);
  
-@@ -2040,6 +2043,10 @@ static void arm_smmu_bus_init(void)
+@@ -2043,6 +2046,10 @@ static void arm_smmu_bus_init(void)
  		bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
  	}
  #endif

target/linux/layerscape/patches-4.14/822-uart-support-layerscape.patch

@@ -22,7 +22,7 @@ Signed-off-by: Biwen Li <[email protected]>
  struct lpuart_port {
  	struct uart_port	port;
  	struct clk		*clk;
-@@ -2149,13 +2151,13 @@ static int lpuart_probe(struct platform_
+@@ -2153,13 +2155,13 @@ static int lpuart_probe(struct platform_
  
  	ret = of_alias_get_id(np, "serial");
  	if (ret < 0) {
@@ -42,7 +42,7 @@ Signed-off-by: Biwen Li <[email protected]>
  	sport->port.line = ret;
  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
-@@ -2246,6 +2248,7 @@ static int lpuart_remove(struct platform
+@@ -2250,6 +2252,7 @@ static int lpuart_remove(struct platform
  	struct lpuart_port *sport = platform_get_drvdata(pdev);
  
  	uart_remove_one_port(&lpuart_reg, &sport->port);

target/linux/layerscape/patches-4.14/824-mmc-sdhci-of-esdhc-add-voltage-switch-support-for-ls.patch

@@ -13,7 +13,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
 
 --- a/drivers/mmc/host/sdhci-of-esdhc.c
 +++ b/drivers/mmc/host/sdhci-of-esdhc.c
-@@ -650,6 +650,7 @@ static void esdhc_reset(struct sdhci_hos
+@@ -658,6 +658,7 @@ static void esdhc_reset(struct sdhci_hos
  static const struct of_device_id scfg_device_ids[] = {
  	{ .compatible = "fsl,t1040-scfg", },
  	{ .compatible = "fsl,ls1012a-scfg", },

target/linux/mediatek/patches-4.14/0033-dsa-multi-cpu.patch

@@ -249,7 +249,7 @@
  
 --- a/net/dsa/slave.c
 +++ b/net/dsa/slave.c
-@@ -1263,7 +1263,7 @@ int dsa_slave_create(struct dsa_port *po
+@@ -1267,7 +1267,7 @@ int dsa_slave_create(struct dsa_port *po
  	int ret;
  
  	cpu_dp = ds->dst->cpu_dp;
@@ -258,7 +258,7 @@
  
  	if (!ds->num_tx_queues)
  		ds->num_tx_queues = 1;
-@@ -1301,6 +1301,7 @@ int dsa_slave_create(struct dsa_port *po
+@@ -1305,6 +1305,7 @@ int dsa_slave_create(struct dsa_port *po
  	p->dp = port;
  	INIT_LIST_HEAD(&p->mall_tc_list);
  	p->xmit = dst->tag_ops->xmit;

target/linux/mediatek/patches-4.14/0107-usb-mtu3-support-36-bit-DMA-address.patch

@@ -74,7 +74,7 @@ Signed-off-by: Felipe Balbi <[email protected]>
  #include <linux/kernel.h>
  #include <linux/module.h>
  #include <linux/of_address.h>
-@@ -759,7 +760,31 @@ static void mtu3_hw_exit(struct mtu3 *mt
+@@ -761,7 +762,31 @@ static void mtu3_hw_exit(struct mtu3 *mt
  	mtu3_mem_free(mtu);
  }
  
@@ -107,7 +107,7 @@ Signed-off-by: Felipe Balbi <[email protected]>
  
  int ssusb_gadget_init(struct ssusb_mtk *ssusb)
  {
-@@ -820,6 +845,12 @@ int ssusb_gadget_init(struct ssusb_mtk *
+@@ -822,6 +847,12 @@ int ssusb_gadget_init(struct ssusb_mtk *
  		return ret;
  	}
  
@@ -120,7 +120,7 @@ Signed-off-by: Felipe Balbi <[email protected]>
  	ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
  	if (ret) {
  		dev_err(dev, "request irq %d failed!\n", mtu->irq);
-@@ -845,6 +876,7 @@ int ssusb_gadget_init(struct ssusb_mtk *
+@@ -847,6 +878,7 @@ int ssusb_gadget_init(struct ssusb_mtk *
  gadget_err:
  	device_init_wakeup(dev, false);
  

target/linux/mediatek/patches-4.14/0109-usb-mtu3-add-support-for-usb3.1-IP.patch

@@ -46,7 +46,7 @@ Signed-off-by: Felipe Balbi <[email protected]>
  	}
  
  	dev_info(mtu->dev, "max_speed: %s\n",
-@@ -624,6 +627,10 @@ static irqreturn_t mtu3_link_isr(struct
+@@ -626,6 +629,10 @@ static irqreturn_t mtu3_link_isr(struct
  		udev_speed = USB_SPEED_SUPER;
  		maxpkt = 512;
  		break;
@@ -57,7 +57,7 @@ Signed-off-by: Felipe Balbi <[email protected]>
  	default:
  		udev_speed = USB_SPEED_UNKNOWN;
  		break;
-@@ -825,14 +832,15 @@ int ssusb_gadget_init(struct ssusb_mtk *
+@@ -827,14 +834,15 @@ int ssusb_gadget_init(struct ssusb_mtk *
  	case USB_SPEED_FULL:
  	case USB_SPEED_HIGH:
  	case USB_SPEED_SUPER:

target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
-@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -431,6 +431,9 @@ uart_get_baud_rate(struct uart_port *por
  		break;
  	}
  

target/linux/ramips/patches-4.14/0070-weak_reordering.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -57,6 +57,7 @@ choice
+@@ -58,6 +58,7 @@ choice
  		select COMMON_CLK
  		select CLKSRC_MIPS_GIC
  		select HW_HAS_PCI

target/linux/ramips/patches-4.14/101-mt7621-timer.patch

@@ -77,7 +77,7 @@
  	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
-@@ -58,6 +58,7 @@ choice
+@@ -59,6 +59,7 @@ choice
  		select CLKSRC_MIPS_GIC
  		select HW_HAS_PCI
  		select WEAK_REORDERING_BEYOND_LLSC