treewide: remove label = "cpu" from DSA dt-binding

This is not used by the DSA dt-binding, so remove it from all devicetrees.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907
Signed-off-by: Arınç ÜNAL <[email protected]>

target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts

@@ -160,7 +160,6 @@
 
 			phy0: port8@8 {
 				reg = <8>;
-				label = "cpu";
 				ethernet = <&eth0>;
 
 				fixed-link {

target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts

@@ -99,7 +99,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 		};

target/linux/bmips/dts/bcm6318.dtsi

@@ -400,7 +400,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm63268.dtsi

@@ -521,7 +521,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6328.dtsi

@@ -418,7 +418,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6362.dtsi

@@ -515,7 +515,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/bmips/dts/bcm6368.dtsi

@@ -529,7 +529,6 @@
 
 				port@8 {
 					reg = <8>;
-					label = "cpu";
 
 					phy-mode = "internal";
 					ethernet = <&ethernet>;

target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts

@@ -112,7 +112,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 

target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ea3500.dts

@@ -125,7 +125,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;

target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi

@@ -447,7 +447,6 @@
 
 				port@6 {
 					reg = <0x6>;
-					label = "cpu";
 					phy-mode = "internal";
 					ethernet = <&eth0>;
 

target/linux/mediatek/dts/mt7622-elecom-wrc-x3200gst3.dts

@@ -258,7 +258,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi

@@ -181,7 +181,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-netgear-wax206.dts

@@ -191,7 +191,6 @@
 
 				port@6 {
 					ethernet = <&gmac0>;
-					label = "cpu";
 					phy-mode = "2500base-x";
 					reg = <6>;
 

target/linux/mediatek/dts/mt7622-ruijie-rg-ew3200.dtsi

@@ -137,7 +137,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7622-xiaomi-redmi-router-ax6s.dts

@@ -196,7 +196,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7623a-unielec-u7623-02.dtsi

@@ -178,7 +178,6 @@
 
 		cpu_port0: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "trgmii";
 

target/linux/mediatek/dts/mt7629-iptime-a6004mx.dts

@@ -161,7 +161,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts

@@ -223,7 +223,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/dts/mt7986a-xiaomi-redmi-router-ax6000.dtsi

@@ -234,7 +234,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi

@@ -350,7 +350,6 @@
 
 		port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac0>;
 			phy-mode = "2500base-x";
 

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts

@@ -139,7 +139,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					ethernet = <&gmac0>;
 					phy-mode = "2500base-x";
 

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts

@@ -184,7 +184,6 @@
 
 			switch0port0: port@0 {
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

@@ -175,7 +175,6 @@
 
 			port@0 {
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&eth0>;
 			};
 

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts

@@ -339,7 +339,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&cp0_eth1>;
 				phy-mode = "2500base-x";
 				managed = "in-band-status";

target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts

@@ -269,7 +269,6 @@
 				status = "disabled";
 
 				reg = "<5>";
-				label = "cpu";
 				ethernet = <&enet2>;
 				phy-mode = "rgmii-id";
 
@@ -281,7 +280,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				ethernet = <&enet3>;
 				phy-mode = "rgmii-id";
 

target/linux/ramips/dts/mt7621.dtsi

@@ -558,7 +558,6 @@
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
 						ethernet = <&gmac0>;
 						phy-mode = "rgmii";