kernel: update 3.10 to 3.10.28

Signed-off-by: Gabor Juhos <[email protected]>

SVN-Revision: 39399

include/kernel-version.mk

@@ -17,8 +17,8 @@ endif
 ifeq ($(LINUX_VERSION),3.9.11)
   LINUX_KERNEL_MD5SUM:=edbf88eb7f7d34dbd5d3887726790755
 endif
-ifeq ($(LINUX_VERSION),3.10.26)
-  LINUX_KERNEL_MD5SUM:=9cdbcb3463b9753fafd97cddb38d1211
+ifeq ($(LINUX_VERSION),3.10.28)
+  LINUX_KERNEL_MD5SUM:=789a39e8a381a60e46fe922cb66d77e2
 endif
 ifeq ($(LINUX_VERSION),3.12.5)
   LINUX_KERNEL_MD5SUM:=5b5330f657f562f7bef6da100a7133b1

target/linux/ar7/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs atm
 MAINTAINER:=Florian Fainelli <[email protected]>
 SUBTARGETS:=generic ac49x
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ar7/patches-3.10/110-flash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -15,7 +15,7 @@ obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
+@@ -16,7 +16,7 @@ obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o

target/linux/ar7/patches-3.10/320-ac49x-mtd-partitions.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -188,6 +188,11 @@ config MTD_OF_PARTS
+@@ -192,6 +192,11 @@ config MTD_OF_PARTS
  	  the partition map from the children of the flash node,
  	  as described in Documentation/devicetree/booting-without-of.txt.
  
@@ -14,7 +14,7 @@
  	---help---
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -14,6 +14,7 @@ mtd-$(CONFIG_MTD_SPLIT_UIMAGE_FW) += mtd
+@@ -15,6 +15,7 @@ mtd-$(CONFIG_MTD_SPLIT_LZMA_FW) += mtdsp
  obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o

target/linux/ar71xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=mips16
 CPU_TYPE=34kc
 SUBTARGETS:=generic nand mikrotik
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -208,6 +208,12 @@ config MTD_BCM47XX_PARTS
+@@ -212,6 +212,12 @@ config MTD_BCM47XX_PARTS
  	  This provides partitions parser for devices based on BCM47xx
  	  boards.
  
@@ -15,7 +15,7 @@
  	depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
  obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
  obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o

target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -210,7 +210,7 @@ config MTD_BCM47XX_PARTS
+@@ -214,7 +214,7 @@ config MTD_BCM47XX_PARTS
  
  config MTD_WRT160NL_PARTS
  	tristate "Linksys WRT160NL partitioning support"
@@ -9,7 +9,7 @@
  	---help---
  	   Linksys WRT160NL partitioning support
  
-@@ -230,6 +230,12 @@ config MTD_MYLOADER_PARTS
+@@ -234,6 +234,12 @@ config MTD_MYLOADER_PARTS
  	  You will still need the parsing functions to be called by the driver
  	  for your particular device. It won't happen automatically.
  
@@ -24,7 +24,7 @@
  config MTD_BLKDEVS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
  obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
  obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o

target/linux/avr32/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/bcm53xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs usb pci pcie gpio
 MAINTAINER:=Hauke Mehrtens <[email protected]>
 CPU_TYPE:=cortex-a9
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/brcm2708/Makefile

@@ -15,7 +15,7 @@ MAINTAINER:=Florian Fainelli <[email protected]>
 CPU_TYPE:=arm1176jzf-s
 CPU_SUBTYPE:=vfp
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += brcm2708-gpu-fw kmod-usb-hid kmod-sound-core kmod-sound-arm-bcm2835

target/linux/brcm47xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Broadcom BCM947xx/953xx
 FEATURES:=squashfs usb pcmcia
 MAINTAINER:=Hauke Mehrtens <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += swconfig wpad-mini nvram \

target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch

@@ -174,7 +174,7 @@
  		return phy_mii_ioctl(phydev, ifr, cmd);
  	}
  
-@@ -17190,8 +17197,10 @@ static int tg3_init_one(struct pci_dev *
+@@ -17193,8 +17200,10 @@ static int tg3_init_one(struct pci_dev *
  			tg3_flag_set(tp, FLUSH_POSTED_WRITES);
  		if (ssb_gige_one_dma_at_once(pdev))
  			tg3_flag_set(tp, ONE_DMA_AT_ONCE);
@@ -186,7 +186,7 @@
  		if (ssb_gige_is_rgmii(pdev))
  			tg3_flag_set(tp, RGMII_MODE);
  	}
-@@ -17461,7 +17470,7 @@ static int tg3_init_one(struct pci_dev *
+@@ -17464,7 +17473,7 @@ static int tg3_init_one(struct pci_dev *
  
  	if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
  		struct phy_device *phydev;

target/linux/brcm63xx/Makefile

@@ -11,7 +11,7 @@ BOARD:=brcm63xx
 BOARDNAME:=Broadcom BCM63xx
 SUBTARGETS:=generic smp
 FEATURES:=squashfs usb atm pci pcmcia usbgadget
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 MAINTAINER:=Florian Fainelli <[email protected]>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/cns21xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
 FEATURES:=squashfs
 CPU_TYPE:=fa526
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/generic/patches-3.10/430-mtd-add-myloader-partition-parser.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -208,6 +208,22 @@ config MTD_BCM47XX_PARTS
+@@ -212,6 +212,22 @@ config MTD_BCM47XX_PARTS
  	  This provides partitions parser for devices based on BCM47xx
  	  boards.
  
@@ -25,7 +25,7 @@
  config MTD_BLKDEVS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
  obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
  obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o

target/linux/generic/patches-3.10/630-packet_socket_type.patch

@@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  #define PACKET_FANOUT_LB		1
 --- a/net/packet/af_packet.c
 +++ b/net/packet/af_packet.c
-@@ -1382,6 +1382,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1403,6 +1403,7 @@ static int packet_rcv_spkt(struct sk_buf
  {
  	struct sock *sk;
  	struct sockaddr_pkt *spkt;
@@ -34,7 +34,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	/*
  	 *	When we registered the protocol we saved the socket in the data
-@@ -1389,6 +1390,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1410,6 +1411,7 @@ static int packet_rcv_spkt(struct sk_buf
  	 */
  
  	sk = pt->af_packet_priv;
@@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	/*
  	 *	Yank back the headers [hope the device set this
-@@ -1401,7 +1403,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1422,7 +1424,7 @@ static int packet_rcv_spkt(struct sk_buf
  	 *	so that this procedure is noop.
  	 */
  
@@ -51,7 +51,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  		goto out;
  
  	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -1608,12 +1610,12 @@ static int packet_rcv(struct sk_buff *sk
+@@ -1629,12 +1631,12 @@ static int packet_rcv(struct sk_buff *sk
  	int skb_len = skb->len;
  	unsigned int snaplen, res;
  
@@ -67,7 +67,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -1726,12 +1728,12 @@ static int tpacket_rcv(struct sk_buff *s
+@@ -1747,12 +1749,12 @@ static int tpacket_rcv(struct sk_buff *s
  	struct timespec ts;
  	__u32 ts_status;
  
@@ -83,7 +83,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -2627,6 +2629,7 @@ static int packet_create(struct net *net
+@@ -2641,6 +2643,7 @@ static int packet_create(struct net *net
  	spin_lock_init(&po->bind_lock);
  	mutex_init(&po->pg_vec_lock);
  	po->prot_hook.func = packet_rcv;
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	if (sock->type == SOCK_PACKET)
  		po->prot_hook.func = packet_rcv_spkt;
-@@ -3237,6 +3240,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3251,6 +3254,16 @@ packet_setsockopt(struct socket *sock, i
  		po->tp_tx_has_off = !!val;
  		return 0;
  	}
@@ -108,7 +108,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	default:
  		return -ENOPROTOOPT;
  	}
-@@ -3288,6 +3301,13 @@ static int packet_getsockopt(struct sock
+@@ -3302,6 +3315,13 @@ static int packet_getsockopt(struct sock
  	case PACKET_VNET_HDR:
  		val = po->has_vnet_hdr;
  		break;

target/linux/generic/patches-3.10/655-increase_skb_pad.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -1844,7 +1844,7 @@ static inline int pskb_network_may_pull(
+@@ -1849,7 +1849,7 @@ static inline int pskb_network_may_pull(
   * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
   */
  #ifndef NET_SKB_PAD

target/linux/generic/patches-3.10/656-skb_reduce_truesize-helper.patch

@@ -14,7 +14,7 @@ when needed.
 
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -1889,6 +1889,24 @@ static inline void pskb_trim_unique(stru
+@@ -1894,6 +1894,24 @@ static inline void pskb_trim_unique(stru
  	BUG_ON(err);
  }
  

target/linux/generic/patches-3.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

@@ -102,7 +102,7 @@
  		return -EINVAL;
 --- a/net/ipv6/route.c
 +++ b/net/ipv6/route.c
-@@ -251,6 +251,24 @@ static const struct rt6_info ip6_prohibi
+@@ -250,6 +250,24 @@ static const struct rt6_info ip6_prohibi
  	.rt6i_ref	= ATOMIC_INIT(1),
  };
  
@@ -127,17 +127,19 @@
  static const struct rt6_info ip6_blk_hole_entry_template = {
  	.dst = {
  		.__refcnt	= ATOMIC_INIT(1),
-@@ -1511,6 +1529,9 @@ int ip6_route_add(struct fib6_config *cf
- 		case RTN_THROW:
- 			rt->dst.error = -EAGAIN;
+@@ -1509,6 +1527,11 @@ int ip6_route_add(struct fib6_config *cf
+ 			rt->dst.output = ip6_pkt_prohibit_out;
+ 			rt->dst.input = ip6_pkt_prohibit;
  			break;
 +		case RTN_FAILED_POLICY:
 +			rt->dst.error = -EPERM;
++			rt->dst.output = ip6_pkt_failed_policy_out;
++			rt->dst.input = ip6_pkt_failed_policy;
 +			break;
+ 		case RTN_THROW:
  		default:
- 			rt->dst.error = -ENETUNREACH;
- 			break;
-@@ -2090,6 +2111,17 @@ static int ip6_pkt_prohibit_out(struct s
+ 			rt->dst.error = (cfg->fc_type == RTN_THROW) ? -EAGAIN
+@@ -2088,6 +2111,17 @@ static int ip6_pkt_prohibit_out(struct s
  	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
  }
  
@@ -152,10 +154,10 @@
 +	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
 +}
 +
- #endif
- 
  /*
-@@ -2296,7 +2328,8 @@ static int rtm_to_fib6_config(struct sk_
+  *	Allocate a dst for local (unicast / anycast) address.
+  */
+@@ -2290,7 +2324,8 @@ static int rtm_to_fib6_config(struct sk_
  	if (rtm->rtm_type == RTN_UNREACHABLE ||
  	    rtm->rtm_type == RTN_BLACKHOLE ||
  	    rtm->rtm_type == RTN_PROHIBIT ||
@@ -165,7 +167,7 @@
  		cfg->fc_flags |= RTF_REJECT;
  
  	if (rtm->rtm_type == RTN_LOCAL)
-@@ -2498,6 +2531,9 @@ static int rt6_fill_node(struct net *net
+@@ -2492,6 +2527,9 @@ static int rt6_fill_node(struct net *net
  		case -EACCES:
  			rtm->rtm_type = RTN_PROHIBIT;
  			break;
@@ -175,7 +177,7 @@
  		case -EAGAIN:
  			rtm->rtm_type = RTN_THROW;
  			break;
-@@ -2748,6 +2784,8 @@ static int ip6_route_dev_notify(struct n
+@@ -2742,6 +2780,8 @@ static int ip6_route_dev_notify(struct n
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
  		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -184,7 +186,7 @@
  		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
  		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
  #endif
-@@ -3008,6 +3046,17 @@ static int __net_init ip6_route_net_init
+@@ -3002,6 +3042,17 @@ static int __net_init ip6_route_net_init
  	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
  	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
  			 ip6_template_metrics, true);
@@ -202,7 +204,7 @@
  #endif
  
  	net->ipv6.sysctl.flush_delay = 0;
-@@ -3026,6 +3075,8 @@ out:
+@@ -3020,6 +3071,8 @@ out:
  	return ret;
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -211,7 +213,7 @@
  out_ip6_prohibit_entry:
  	kfree(net->ipv6.ip6_prohibit_entry);
  out_ip6_null_entry:
-@@ -3043,6 +3094,7 @@ static void __net_exit ip6_route_net_exi
+@@ -3037,6 +3090,7 @@ static void __net_exit ip6_route_net_exi
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  	kfree(net->ipv6.ip6_prohibit_entry);
  	kfree(net->ipv6.ip6_blk_hole_entry);
@@ -219,7 +221,7 @@
  #endif
  	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
  }
-@@ -3139,6 +3191,9 @@ int __init ip6_route_init(void)
+@@ -3133,6 +3187,9 @@ int __init ip6_route_init(void)
  	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
  	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
  	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);

target/linux/generic/patches-3.10/721-phy_packets.patch

@@ -34,7 +34,7 @@
  #define IF_GET_IFACE	0x0001		/* for querying only */
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -1874,6 +1874,10 @@ static inline int pskb_trim(struct sk_bu
+@@ -1879,6 +1879,10 @@ static inline int pskb_trim(struct sk_bu
  	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
  }
  
@@ -45,7 +45,7 @@
  /**
   *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
   *	@skb: buffer to alter
-@@ -1998,16 +2002,6 @@ static inline struct sk_buff *dev_alloc_
+@@ -2003,16 +2007,6 @@ static inline struct sk_buff *dev_alloc_
  }
  
  

target/linux/imx6/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9
 CPU_SUBTYPE:=vfpv3
 MAINTAINER:=Luka Perkov <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ixp4xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 SUBTARGETS=generic harddisk
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/kirkwood/Makefile

@@ -13,7 +13,7 @@ FEATURES:=targz usb jffs2_nand ubifs
 CPU_TYPE:=xscale
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/lantiq/Makefile

@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
 FEATURES:=squashfs
 SUBTARGETS=xway xrx200 ase falcon
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 CPU_TYPE:=mips32r2
 

target/linux/lantiq/patches-3.10/0008-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -149,6 +149,11 @@ config MICREL_PHY
+@@ -153,6 +153,11 @@ config MICREL_PHY
  	---help---
  	  Currently has a driver for the KSZ8041
  

target/linux/malta/Makefile

@@ -12,7 +12,7 @@ SUBTARGETS:=le be le64 be64
 INITRAMFS_EXTRA_FILES:=
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 DEVICE_TYPE:=developerboard
 

target/linux/mpc85xx/Makefile

@@ -14,7 +14,7 @@ FEATURES:=spe_fpu squashfs
 MAINTAINER:=Imre Kaloz <[email protected]>
 SUBTARGETS=generic p1020
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mvebu/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=cortex-a9
 CPU_SUBTYPE:=vfpv3
 MAINTAINER:=Luka Perkov <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/octeon/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=octeon
 CPU_CFLAGS_octeon:=-march=octeon
 MAINTAINER:=John Crispin <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc40x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 CPU_TYPE:=405
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc44x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs broken
 CPU_TYPE:=440
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ramips/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ralink RT288x/RT3xxx
 SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x
 FEATURES:=squashfs gpio
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\

target/linux/ramips/patches-3.10/0508-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch

@@ -16,11 +16,9 @@ Signed-off-by: Ralf Baechle <[email protected]>
  arch/mips/kernel/irq-gic.c |   15 +++++++--------
  1 file changed, 7 insertions(+), 8 deletions(-)
 
-diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
-index c01b307..5b5ddb2 100644
 --- a/arch/mips/kernel/irq-gic.c
 +++ b/arch/mips/kernel/irq-gic.c
-@@ -219,16 +219,15 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
+@@ -219,16 +219,15 @@ static int gic_set_affinity(struct irq_d
  
  	/* Assumption : cpumask refers to a single CPU */
  	spin_lock_irqsave(&gic_lock, flags);
@@ -44,6 +42,3 @@ index c01b307..5b5ddb2 100644
  	cpumask_copy(d->affinity, cpumask);
  	spin_unlock_irqrestore(&gic_lock, flags);
  
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0509-MIPS-Kconfig-CMP-support-needs-to-select-SMP-as-well.patch

@@ -40,11 +40,9 @@ Signed-off-by: Ralf Baechle <[email protected]>
  arch/mips/Kconfig |    1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index e82c066..b537fb1 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -2010,6 +2010,7 @@ config MIPS_VPE_APSP_API
+@@ -2038,6 +2038,7 @@ config MIPS_VPE_APSP_API
  config MIPS_CMP
  	bool "MIPS CMP framework support"
  	depends on SYS_SUPPORTS_MIPS_CMP
@@ -52,6 +50,3 @@ index e82c066..b537fb1 100644
  	select SYNC_R4K
  	select SYS_SUPPORTS_SMP
  	select SYS_SUPPORTS_SCHED_SMT if SMP
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0510-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch

@@ -19,8 +19,6 @@ Signed-off-by: Ralf Baechle <[email protected]>
  arch/mips/kernel/smp-cmp.c |   13 +++++++++++--
  1 file changed, 11 insertions(+), 2 deletions(-)
 
-diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
-index c2e5d74..5969f1e 100644
 --- a/arch/mips/kernel/smp-cmp.c
 +++ b/arch/mips/kernel/smp-cmp.c
 @@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
@@ -52,6 +50,3 @@ index c2e5d74..5969f1e 100644
  		smp_num_siblings = nvpe;
  	}
  	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0511-MIPS-GIC-Send-IPIs-using-the-GIC.patch

@@ -10,11 +10,9 @@ Signed-off-by: Steven J. Hill <[email protected]>
  arch/mips/kernel/smp-mt.c |   32 ++++++++++++++++++++++++++++++++
  1 file changed, 32 insertions(+)
 
-diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
-index 2f8c468..d057c84 100644
 --- a/arch/mips/kernel/smp-mt.c
 +++ b/arch/mips/kernel/smp-mt.c
-@@ -71,6 +71,7 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
+@@ -71,6 +71,7 @@ static unsigned int __init smvp_vpe_init
  
  		/* Record this as available CPU */
  		set_cpu_possible(tc, true);
@@ -22,7 +20,7 @@ index 2f8c468..d057c84 100644
  		__cpu_number_map[tc]	= ++ncpu;
  		__cpu_logical_map[ncpu] = tc;
  	}
-@@ -112,12 +113,35 @@ static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
+@@ -112,12 +113,35 @@ static void __init smvp_tc_init(unsigned
  	write_tc_c0_tchalt(TCHALT_H);
  }
  
@@ -58,7 +56,7 @@ index 2f8c468..d057c84 100644
  	local_irq_save(flags);
  
  	vpflags = dvpe();	/* can't access the other CPU's registers whilst MVPE enabled */
-@@ -164,6 +188,8 @@ static void __cpuinit vsmp_init_secondary(void)
+@@ -164,6 +188,8 @@ static void __cpuinit vsmp_init_secondar
  
  static void __cpuinit vsmp_smp_finish(void)
  {
@@ -67,7 +65,7 @@ index 2f8c468..d057c84 100644
  	/* CDFIXME: remove this? */
  	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
  
-@@ -178,6 +204,7 @@ static void __cpuinit vsmp_smp_finish(void)
+@@ -178,6 +204,7 @@ static void __cpuinit vsmp_smp_finish(vo
  
  static void vsmp_cpus_done(void)
  {
@@ -101,6 +99,3 @@ index 2f8c468..d057c84 100644
  	mips_mt_set_cpuoptions();
  }
  
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch

@@ -1,8 +1,6 @@
-Index: linux-3.10.26/drivers/usb/core/hub.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/core/hub.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/core/hub.c	2014-01-19 16:29:18.548615960 +0000
-@@ -1259,7 +1259,7 @@
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -1259,7 +1259,7 @@ static void hub_quiesce(struct usb_hub *
  	if (type != HUB_SUSPEND) {
  		/* Disconnect all the children */
  		for (i = 0; i < hdev->maxchild; ++i) {
@@ -11,11 +9,9 @@ Index: linux-3.10.26/drivers/usb/core/hub.c
  				usb_disconnect(&hub->ports[i]->child);
  		}
  	}
-Index: linux-3.10.26/drivers/usb/core/port.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/core/port.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/core/port.c	2014-01-19 16:29:18.548615960 +0000
-@@ -193,6 +193,7 @@
+--- a/drivers/usb/core/port.c
++++ b/drivers/usb/core/port.c
+@@ -193,6 +193,7 @@ exit:
  void usb_hub_remove_port_device(struct usb_hub *hub,
  				       int port1)
  {
@@ -24,11 +20,9 @@ Index: linux-3.10.26/drivers/usb/core/port.c
 +		device_unregister(&hub->ports[port1 - 1]->dev);
  }
  
-Index: linux-3.10.26/drivers/usb/host/Kconfig
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/Kconfig	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/Kconfig	2014-01-19 16:29:18.548615960 +0000
-@@ -28,7 +28,11 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -28,7 +28,11 @@ config USB_XHCI_HCD
  if USB_XHCI_HCD
  
  config USB_XHCI_PLATFORM
@@ -41,11 +35,9 @@ Index: linux-3.10.26/drivers/usb/host/Kconfig
  
  config USB_XHCI_HCD_DEBUGGING
  	bool "Debugging for the xHCI host controller"
-Index: linux-3.10.26/drivers/usb/host/Makefile
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/Makefile	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/Makefile	2014-01-19 16:30:54.964617843 +0000
-@@ -13,15 +13,23 @@
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -13,15 +13,23 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
  
  xhci-hcd-y := xhci.o xhci-mem.o
  xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
@@ -70,10 +62,8 @@ Index: linux-3.10.26/drivers/usb/host/Makefile
  
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
-Index: linux-3.10.26/drivers/usb/host/pci-quirks.h
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/pci-quirks.h	2014-01-19 16:29:17.392615927 +0000
-+++ linux-3.10.26/drivers/usb/host/pci-quirks.h	2014-01-19 16:29:18.548615960 +0000
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
 @@ -1,7 +1,7 @@
  #ifndef __LINUX_USB_PCI_QUIRKS_H
  #define __LINUX_USB_PCI_QUIRKS_H
@@ -82,11 +72,9 @@ Index: linux-3.10.26/drivers/usb/host/pci-quirks.h
 +#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
  void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
  int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
- bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
-Index: linux-3.10.26/drivers/usb/host/xhci.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci.c	2014-01-19 16:29:18.548615960 +0000
+ #endif  /* CONFIG_PCI */
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
 @@ -30,6 +30,16 @@
  
  #include "xhci.h"
@@ -104,7 +92,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  #define DRIVER_AUTHOR "Sarah Sharp"
  #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
  
-@@ -38,6 +48,18 @@
+@@ -38,6 +48,18 @@ static int link_quirk;
  module_param(link_quirk, int, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
  
@@ -123,7 +111,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  /* TODO: copied from ehci-hcd.c - can this be refactored? */
  /*
   * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -189,7 +211,7 @@
+@@ -189,7 +211,7 @@ int xhci_reset(struct xhci_hcd *xhci)
  	return ret;
  }
  
@@ -132,7 +120,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  static int xhci_free_msi(struct xhci_hcd *xhci)
  {
  	int i;
-@@ -386,6 +408,7 @@
+@@ -386,6 +408,7 @@ static int xhci_try_enable_msi(struct us
  		return ret;
  	}
  	hcd->irq = pdev->irq;
@@ -140,7 +128,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	return 0;
  }
  
-@@ -427,6 +450,11 @@
+@@ -427,6 +450,11 @@ static void compliance_mode_recovery(uns
  			xhci_dbg(xhci, "Attempting compliance mode recovery\n");
  			hcd = xhci->shared_hcd;
  
@@ -152,7 +140,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  			if (hcd->state == HC_STATE_SUSPENDED)
  				usb_hcd_resume_root_hub(hcd);
  
-@@ -475,6 +503,9 @@
+@@ -475,6 +503,9 @@ bool xhci_compliance_mode_recovery_timer
  {
  	const char *dmi_product_name, *dmi_sys_vendor;
  
@@ -162,7 +150,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
  	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
  	if (!dmi_product_name || !dmi_sys_vendor)
-@@ -518,6 +549,10 @@
+@@ -518,6 +549,10 @@ int xhci_init(struct usb_hcd *hcd)
  	} else {
  		xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
  	}
@@ -173,7 +161,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	retval = xhci_mem_init(xhci, GFP_KERNEL);
  	xhci_dbg(xhci, "Finished xhci_init\n");
  
-@@ -661,7 +696,11 @@
+@@ -661,7 +696,11 @@ int xhci_run(struct usb_hcd *hcd)
  	xhci_dbg(xhci, "// Set the interrupt modulation register\n");
  	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
  	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -185,7 +173,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
  
  	/* Set the HCD state before we enable the irqs */
-@@ -682,6 +721,9 @@
+@@ -682,6 +721,9 @@ int xhci_run(struct usb_hcd *hcd)
  		xhci_queue_vendor_command(xhci, 0, 0, 0,
  				TRB_TYPE(TRB_NEC_GET_FW));
  
@@ -195,7 +183,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
  	return 0;
  }
-@@ -999,7 +1041,6 @@
+@@ -999,7 +1041,6 @@ int xhci_resume(struct xhci_hcd *xhci, b
  
  	/* If restore operation fails, re-initialize the HC during resume */
  	if ((temp & STS_SRE) || hibernated) {
@@ -203,7 +191,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
  				!(xhci_all_ports_seen_u0(xhci))) {
  			del_timer_sync(&xhci->comp_mode_recovery_timer);
-@@ -1583,6 +1624,13 @@
+@@ -1583,6 +1624,13 @@ int xhci_drop_endpoint(struct usb_hcd *h
  	u32 drop_flag;
  	u32 new_add_flags, new_drop_flags, new_slot_info;
  	int ret;
@@ -217,7 +205,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0)
-@@ -1634,6 +1682,40 @@
+@@ -1634,6 +1682,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
  
  	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
  
@@ -258,7 +246,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
  			(unsigned int) ep->desc.bEndpointAddress,
  			udev->slot_id,
-@@ -1669,6 +1751,18 @@
+@@ -1669,6 +1751,18 @@ int xhci_add_endpoint(struct usb_hcd *hc
  	u32 new_add_flags, new_drop_flags, new_slot_info;
  	struct xhci_virt_device *virt_dev;
  	int ret = 0;
@@ -277,7 +265,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0) {
-@@ -1731,6 +1825,56 @@
+@@ -1731,6 +1825,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
  		return -ENOMEM;
  	}
  
@@ -334,7 +322,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -2694,7 +2838,7 @@
+@@ -2694,7 +2838,7 @@ int xhci_check_bandwidth(struct usb_hcd
  	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
  			ctrl_ctx->drop_flags == 0)
  		return 0;
@@ -343,7 +331,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	xhci_dbg(xhci, "New Input Control Context:\n");
  	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
  	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
-@@ -4230,10 +4374,14 @@
+@@ -4230,10 +4374,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1) {
@@ -358,7 +346,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  			return xhci_calculate_intel_u2_timeout(udev, desc);
  	}
  
-@@ -4659,7 +4807,9 @@
+@@ -4659,7 +4807,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	/* Accept arbitrarily long scatter-gather lists */
  	hcd->self.sg_tablesize = ~0;
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -368,7 +356,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4728,6 +4878,10 @@
+@@ -4728,6 +4878,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		goto error;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -379,7 +367,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
  	if (HCC_64BIT_ADDR(temp)) {
  		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-@@ -4752,8 +4906,21 @@
+@@ -4752,8 +4906,21 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  
@@ -401,7 +389,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	int retval;
  
  	retval = xhci_register_pci();
-@@ -4766,6 +4933,33 @@
+@@ -4766,6 +4933,33 @@ static int __init xhci_hcd_init(void)
  		printk(KERN_DEBUG "Problem registering platform driver.");
  		goto unreg_pci;
  	}
@@ -435,7 +423,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	/*
  	 * Check the compiler generated sizes of structures that must be laid
  	 * out in specific ways for hardware access.
-@@ -4783,6 +4977,7 @@
+@@ -4783,6 +4977,7 @@ static int __init xhci_hcd_init(void)
  	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
  	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
  	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
@@ -443,10 +431,8 @@ Index: linux-3.10.26/drivers/usb/host/xhci.c
  	return 0;
  unreg_pci:
  	xhci_unregister_pci();
-Index: linux-3.10.26/drivers/usb/host/xhci-dbg.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci-dbg.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci-dbg.c	2014-01-19 16:29:18.548615960 +0000
+--- a/drivers/usb/host/xhci-dbg.c
++++ b/drivers/usb/host/xhci-dbg.c
 @@ -21,6 +21,9 @@
   */
  
@@ -457,10 +443,8 @@ Index: linux-3.10.26/drivers/usb/host/xhci-dbg.c
  
  #define XHCI_INIT_VALUE 0x0
  
-Index: linux-3.10.26/drivers/usb/host/xhci.h
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci.h	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci.h	2014-01-19 16:29:18.548615960 +0000
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
 @@ -29,9 +29,24 @@
  #include <linux/usb/hcd.h>
  
@@ -487,7 +471,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.h
  /* xHCI PCI Configuration Registers */
  #define XHCI_SBRN_OFFSET	(0x60)
  
-@@ -1536,8 +1551,12 @@
+@@ -1536,8 +1551,12 @@ struct xhci_hcd {
  	/* Compliance Mode Recovery Data */
  	struct timer_list	comp_mode_recovery_timer;
  	u32			port_status_u0;
@@ -500,7 +484,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci.h
  };
  
  /* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1703,7 +1722,7 @@
+@@ -1703,7 +1722,7 @@ void xhci_urb_free_priv(struct xhci_hcd
  void xhci_free_command(struct xhci_hcd *xhci,
  		struct xhci_command *command);
  
@@ -509,11 +493,9 @@ Index: linux-3.10.26/drivers/usb/host/xhci.h
  /* xHCI PCI glue */
  int xhci_register_pci(void);
  void xhci_unregister_pci(void);
-Index: linux-3.10.26/drivers/usb/host/xhci-mem.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci-mem.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci-mem.c	2014-01-19 16:29:18.548615960 +0000
-@@ -65,6 +65,9 @@
+--- a/drivers/usb/host/xhci-mem.c
++++ b/drivers/usb/host/xhci-mem.c
+@@ -65,6 +65,9 @@ static struct xhci_segment *xhci_segment
  
  static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
  {
@@ -523,7 +505,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-mem.c
  	if (seg->trbs) {
  		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
  		seg->trbs = NULL;
-@@ -1446,9 +1449,17 @@
+@@ -1446,9 +1449,17 @@ int xhci_endpoint_init(struct xhci_hcd *
  			max_burst = (usb_endpoint_maxp(&ep->desc)
  				     & 0x1800) >> 11;
  		}
@@ -541,11 +523,9 @@ Index: linux-3.10.26/drivers/usb/host/xhci-mem.c
  		break;
  	default:
  		BUG();
-Index: linux-3.10.26/drivers/usb/host/xhci-plat.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci-plat.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci-plat.c	2014-01-19 16:29:18.548615960 +0000
-@@ -25,6 +25,13 @@
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -25,6 +25,13 @@ static void xhci_plat_quirks(struct devi
  	 * dev struct in order to setup MSI
  	 */
  	xhci->quirks |= XHCI_PLAT;
@@ -559,7 +539,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-plat.c
  }
  
  /* called during probe() after chip reset completes */
-@@ -96,20 +103,32 @@
+@@ -96,20 +103,32 @@ static int xhci_plat_probe(struct platfo
  
  	driver = &xhci_plat_xhci_driver;
  
@@ -592,11 +572,9 @@ Index: linux-3.10.26/drivers/usb/host/xhci-plat.c
  
  	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
  				driver->description)) {
-Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
-===================================================================
---- linux-3.10.26.orig/drivers/usb/host/xhci-ring.c	2014-01-09 20:25:15.000000000 +0000
-+++ linux-3.10.26/drivers/usb/host/xhci-ring.c	2014-01-19 16:29:18.548615960 +0000
-@@ -236,7 +236,6 @@
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -236,7 +236,6 @@ static void inc_enq(struct xhci_hcd *xhc
  			 */
  			if (!chain && !more_trbs_coming)
  				break;
@@ -604,7 +582,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  			/* If we're not dealing with 0.95 hardware or
  			 * isoc rings on AMD 0.96 host,
  			 * carry over the chain bit of the previous TRB
-@@ -273,16 +272,20 @@
+@@ -273,16 +272,20 @@ static void inc_enq(struct xhci_hcd *xhc
  static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
  		unsigned int num_trbs)
  {
@@ -625,7 +603,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  
  	return 1;
  }
-@@ -2910,6 +2913,7 @@
+@@ -2910,6 +2913,7 @@ static int prepare_ring(struct xhci_hcd
  		next = ring->enqueue;
  
  		while (last_trb(xhci, ring, ring->enq_seg, next)) {
@@ -633,7 +611,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  			/* If we're not dealing with 0.95 hardware or isoc rings
  			 * on AMD 0.96 host, clear the chain bit.
  			 */
-@@ -2919,7 +2923,9 @@
+@@ -2919,7 +2923,9 @@ static int prepare_ring(struct xhci_hcd
  				next->link.control &= cpu_to_le32(~TRB_CHAIN);
  			else
  				next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -644,7 +622,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  			wmb();
  			next->link.control ^= cpu_to_le32(TRB_CYCLE);
  
-@@ -3049,6 +3055,9 @@
+@@ -3049,6 +3055,9 @@ static void giveback_first_trb(struct xh
  		start_trb->field[3] |= cpu_to_le32(start_cycle);
  	else
  		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
@@ -654,7 +632,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
  }
  
-@@ -3108,6 +3117,29 @@
+@@ -3108,6 +3117,29 @@ static u32 xhci_td_remainder(unsigned in
  		return (remainder >> 10) << 17;
  }
  
@@ -684,7 +662,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  /*
   * For xHCI 1.0 host controllers, TD size is the number of max packet sized
   * packets remaining in the TD (*not* including this TRB).
-@@ -3245,6 +3277,7 @@
+@@ -3245,6 +3277,7 @@ static int queue_bulk_sg_tx(struct xhci_
  		}
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -692,7 +670,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3254,6 +3287,13 @@
+@@ -3254,6 +3287,13 @@ static int queue_bulk_sg_tx(struct xhci_
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -706,7 +684,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3316,6 +3356,9 @@
+@@ -3316,6 +3356,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  	int running_total, trb_buff_len, ret;
  	unsigned int total_packet_count;
  	u64 addr;
@@ -716,7 +694,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  
  	if (urb->num_sgs)
  		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3341,6 +3384,25 @@
+@@ -3341,6 +3384,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  		running_total += TRB_MAX_BUFF_SIZE;
  	}
  	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
@@ -742,7 +720,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  
  	ret = prepare_transfer(xhci, xhci->devs[slot_id],
  			ep_index, urb->stream_id,
-@@ -3400,6 +3462,7 @@
+@@ -3400,6 +3462,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  			field |= TRB_ISP;
  
  		/* Set the TRB length, TD size, and interrupter fields. */
@@ -750,7 +728,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		if (xhci->hci_version < 0x100) {
  			remainder = xhci_td_remainder(
  					urb->transfer_buffer_length -
-@@ -3409,6 +3472,10 @@
+@@ -3409,6 +3472,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
  					trb_buff_len, total_packet_count, urb,
  					num_trbs - 1);
  		}
@@ -761,7 +739,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		length_field = TRB_LEN(trb_buff_len) |
  			remainder |
  			TRB_INTR_TARGET(0);
-@@ -3498,7 +3565,11 @@
+@@ -3498,7 +3565,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field |= 0x1;
  
  	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
@@ -773,7 +751,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		if (urb->transfer_buffer_length > 0) {
  			if (setup->bRequestType & USB_DIR_IN)
  				field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3522,7 +3593,12 @@
+@@ -3522,7 +3593,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  		field = TRB_TYPE(TRB_DATA);
  
  	length_field = TRB_LEN(urb->transfer_buffer_length) |
@@ -786,7 +764,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  		TRB_INTR_TARGET(0);
  	if (urb->transfer_buffer_length > 0) {
  		if (setup->bRequestType & USB_DIR_IN)
-@@ -3533,7 +3609,7 @@
+@@ -3533,7 +3609,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
  				length_field,
  				field | ep_ring->cycle_state);
  	}
@@ -795,7 +773,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  	/* Save the DMA address of the last TRB in the TD */
  	td->last_trb = ep_ring->enqueue;
  
-@@ -3645,6 +3721,9 @@
+@@ -3645,6 +3721,9 @@ static int xhci_queue_isoc_tx(struct xhc
  	u64 start_addr, addr;
  	int i, j;
  	bool more_trbs_coming;
@@ -805,7 +783,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  
  	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
  
-@@ -3658,6 +3737,21 @@
+@@ -3658,6 +3737,21 @@ static int xhci_queue_isoc_tx(struct xhc
  	start_trb = &ep_ring->enqueue->generic;
  	start_cycle = ep_ring->cycle_state;
  
@@ -827,7 +805,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  	urb_priv = urb->hcpriv;
  	/* Queue the first TRB, even if it's zero-length */
  	for (i = 0; i < num_tds; i++) {
-@@ -3729,9 +3823,13 @@
+@@ -3729,9 +3823,13 @@ static int xhci_queue_isoc_tx(struct xhc
  			} else {
  				td->last_trb = ep_ring->enqueue;
  				field |= TRB_IOC;
@@ -841,7 +819,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  					/* Set BEI bit except for the last td */
  					if (i < num_tds - 1)
  						field |= TRB_BEI;
-@@ -3746,6 +3844,7 @@
+@@ -3746,6 +3844,7 @@ static int xhci_queue_isoc_tx(struct xhc
  				trb_buff_len = td_remain_len;
  
  			/* Set the TRB length, TD size, & interrupter fields. */
@@ -849,7 +827,7 @@ Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
  			if (xhci->hci_version < 0x100) {
  				remainder = xhci_td_remainder(
  						td_len - running_total);
-@@ -3755,6 +3854,10 @@
+@@ -3755,6 +3854,10 @@ static int xhci_queue_isoc_tx(struct xhc
  						total_packet_count, urb,
  						(trbs_per_td - j - 1));
  			}

target/linux/ramips/patches-3.10/999-memory-detect.patch

@@ -1,8 +1,6 @@
-Index: linux-3.10.26/arch/mips/ralink/of.c
-===================================================================
---- linux-3.10.26.orig/arch/mips/ralink/of.c	2014-01-12 11:49:40.292069849 +0100
-+++ linux-3.10.26/arch/mips/ralink/of.c	2014-01-12 12:38:01.236138974 +0100
-@@ -80,6 +80,16 @@
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -80,6 +80,16 @@ void __init device_tree_init(void)
  }
  
  extern struct boot_param_header __image_dtb;
@@ -19,7 +17,7 @@ Index: linux-3.10.26/arch/mips/ralink/of.c
  
  void __init plat_mem_setup(void)
  {
-@@ -90,8 +100,10 @@
+@@ -90,8 +100,10 @@ void __init plat_mem_setup(void)
  	 * parsed resulting in our memory appearing
  	 */
  	__dt_setup_arch(&__image_dtb);

target/linux/ramips/patches-3.10/999-raeth_fixes.patch

@@ -1,8 +1,6 @@
-Index: linux-3.10.26/drivers/net/ethernet/ralink/ralink_soc_eth.c
-===================================================================
---- linux-3.10.26.orig/drivers/net/ethernet/ralink/ralink_soc_eth.c	2014-01-12 11:49:40.052069844 +0100
-+++ linux-3.10.26/drivers/net/ethernet/ralink/ralink_soc_eth.c	2014-01-12 12:49:31.776155429 +0100
-@@ -335,7 +335,7 @@
+--- a/drivers/net/ethernet/ralink/ralink_soc_eth.c
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -335,7 +335,7 @@ static int fe_start_xmit(struct sk_buff
  	if (priv->soc->tso)
  		fe_start_tso(skb, dev, nr_frags, tx);
  
@@ -11,7 +9,7 @@ Index: linux-3.10.26/drivers/net/ethernet/ralink/ralink_soc_eth.c
  		struct iphdr *iph = NULL;
  		struct tcphdr *th = NULL;
  		struct ipv6hdr *ip6h = NULL;
-@@ -741,8 +741,7 @@
+@@ -741,8 +741,7 @@ static int fe_probe(struct platform_devi
  		dev_info(&pdev->dev, "Enabling TSO\n");
  		netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
  	}

target/linux/rb532/Makefile

@@ -11,7 +11,7 @@ BOARD:=rb532
 BOARDNAME:=Mikrotik RouterBoard 532
 FEATURES:=pci targz broken
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532

target/linux/realview/Makefile

@@ -14,7 +14,7 @@ CPU_TYPE:=mpcore
 CPU_SUBTYPE:=vfp
 MAINTAINER:=Florian Fainelli <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 DEVICE_TYPE:=developerboard
 

target/linux/sparc/Makefile

@@ -11,7 +11,7 @@ BOARD:=sparc
 BOARDNAME:=Sun UltraSPARC
 FEATURES+=fpu tgz ext4 squashfs broken
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 MAINTAINER:=Imre Kaloz <[email protected]>
 
 include $(INCLUDE_DIR)/target.mk

target/linux/x86/alix2/target.mk

@@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
 			kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
 			kmod-ledtrig-netdev \
 			kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 CS5535_MASK:=0x0b000042
 
 CPU_TYPE := geode

target/linux/x86/generic/target.mk

@@ -1,6 +1,6 @@
 BOARDNAME:=Generic
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 define Target/Description
 	Build firmware images for x86 based boards

target/linux/x86/kvm_guest/target.mk

@@ -2,4 +2,4 @@ BOARDNAME:=KVM Guest
 FEATURES:=ext4 pci usb
 DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28

target/linux/x86_64/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=x86_64
 FEATURES:=ext4 vdi vmdk targz
 MAINTAINER:=Imre Kaloz <[email protected]>
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 KERNELNAME:=bzImage
 

target/linux/xburst/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst
 FEATURES:=targz ubifs audio
 SUBTARGETS:=qi_lb60 n516 n526 id800wt
 
-LINUX_VERSION:=3.10.26
+LINUX_VERSION:=3.10.28
 
 DEVICE_TYPE=other