kernel: remove obsolete kernel version switches for 4.19

This removes switches dependent on kernel version 4.19 as well as
several packages/modules selected only for that version.

Signed-off-by: Adrian Schmutzler <[email protected]>

config/Config-kernel.in

@@ -44,15 +44,8 @@ config KERNEL_DEBUG_FS
 	  write to these files. Many common debugging facilities, such as
 	  ftrace, require the existence of debugfs.
 
-# remove KERNEL_MIPS_FPU_EMULATOR after kernel 4.19 is gone
-config KERNEL_MIPS_FPU_EMULATOR
-	bool "Compile the kernel with MIPS FPU Emulator"
-	default y if TARGET_pistachio
-	depends on (mips || mipsel || mips64 || mips64el)
-
 config KERNEL_MIPS_FP_SUPPORT
 	bool
-	default y if KERNEL_MIPS_FPU_EMULATOR
 
 config KERNEL_ARM_PMU
 	bool

include/image.mk

@@ -162,18 +162,12 @@ DTC_FLAGS += \
   -Wno-unit_address_format \
   -Wno-pci_bridge \
   -Wno-pci_device_bus_num \
-  -Wno-pci_device_reg
-ifeq ($(strip $(call kernel_patchver_ge,4.17.0)),1)
-  DTC_FLAGS += \
-	-Wno-avoid_unnecessary_addr_size \
-	-Wno-alias_paths
-endif
-ifeq ($(strip $(call kernel_patchver_ge,4.18.0)),1)
-  DTC_FLAGS += \
-	-Wno-graph_child_address \
-	-Wno-graph_port \
-	-Wno-unique_unit_address
-endif
+  -Wno-pci_device_reg \
+  -Wno-avoid_unnecessary_addr_size \
+  -Wno-alias_paths \
+  -Wno-graph_child_address \
+  -Wno-graph_port \
+  -Wno-unique_unit_address
 
 define Image/pad-to
 	dd if=$(1) of=$(1).new bs=$(2) conv=sync

include/netfilter.mk

@@ -184,21 +184,17 @@ $(eval $(call nf_add,IPT_IPV6_EXTRA,CONFIG_IP6_NF_MATCH_RT, $(P_V6)ip6t_rt))
 
 # kernel only
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT, $(P_XT)nf_nat),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT,CONFIG_NF_NAT_IPV4, $(P_V4)nf_nat_ipv4, lt 5.1)))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_NAT6,CONFIG_NF_NAT_IPV6, $(P_V6)nf_nat_ipv6, lt 5.1)))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_NETFILTER_XT_NAT, $(P_XT)xt_nat),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT,CONFIG_IP_NF_NAT, $(P_V4)iptable_nat),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT6,CONFIG_IP6_NF_NAT, $(P_V6)ip6table_nat),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT6,CONFIG_IP6_NF_TARGET_MASQUERADE, $(P_V6)ip6t_MASQUERADE, lt 5.2),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_NAT6,CONFIG_IP6_NF_TARGET_NPT, $(P_V6)ip6t_NPT),))
 
 # userland only
 $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_NAT,CONFIG_NF_NAT, ipt_SNAT ipt_DNAT)))
 $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_NAT6,CONFIG_IP6_NF_TARGET_NPT, ip6t_DNPT ip6t_SNPT)))
 
-$(eval $(call nf_add,IPT_NAT,CONFIG_IP_NF_TARGET_MASQUERADE, $(P_V4)ipt_MASQUERADE, lt 5.2))
-$(eval $(call nf_add,IPT_NAT,CONFIG_NETFILTER_XT_TARGET_MASQUERADE, $(P_XT)xt_MASQUERADE, ge 5.2))
+$(eval $(call nf_add,IPT_NAT,CONFIG_NETFILTER_XT_TARGET_MASQUERADE, $(P_XT)xt_MASQUERADE))
 $(eval $(call nf_add,IPT_NAT,CONFIG_NETFILTER_XT_TARGET_REDIRECT, $(P_XT)xt_REDIRECT))
 
 
@@ -218,8 +214,6 @@ $(eval $(call nf_add,NF_NATHELPER,CONFIG_NF_NAT_FTP, $(P_XT)nf_nat_ftp))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_BROADCAST, $(P_XT)nf_conntrack_broadcast))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_AMANDA, $(P_XT)nf_conntrack_amanda))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_NAT_AMANDA, $(P_XT)nf_nat_amanda))
-$(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CT_PROTO_GRE, $(P_XT)nf_conntrack_proto_gre, lt 5.1))
-$(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_NAT_PROTO_GRE, $(P_V4)nf_nat_proto_gre, lt 5.0))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_H323, $(P_XT)nf_conntrack_h323))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_NAT_H323, $(P_V4)nf_nat_h323))
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_PPTP, $(P_XT)nf_conntrack_pptp))
@@ -331,11 +325,8 @@ $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_NFQUEUE, $(P_EBT)ebt_nf
 # nftables
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES, $(P_XT)nf_tables),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NF_TABLES_SET, $(P_XT)nf_tables_set),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_CHAIN_ROUTE_IPV4, $(P_V4)nft_chain_route_ipv4, lt 5.2),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_CHAIN_ROUTE_IPV6, $(P_V6)nft_chain_route_ipv6, lt 5.2),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_COUNTER, $(P_XT)nft_counter),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_CT, $(P_XT)nft_ct),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_EXTHDR, $(P_XT)nft_exthdr, lt 4.18),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_HASH, $(P_XT)nft_hash),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_LIMIT, $(P_XT)nft_limit),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_CORE,CONFIG_NFT_LOG, $(P_XT)nft_log),))
@@ -351,14 +342,12 @@ $(eval $(if $(NF_KMOD),$(call nf_add,NFT_BRIDGE,CONFIG_NFT_BRIDGE_META, $(P_EBT)
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_BRIDGE,CONFIG_NFT_BRIDGE_REJECT, $(P_EBT)nft_reject_bridge),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_NAT, $(P_XT)nft_nat),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_NAT, $(P_XT)nft_chain_nat, ge 5.1),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_CHAIN_NAT_IPV4, $(P_V4)nft_chain_nat_ipv4, lt 5.1),))
+$(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_NAT, $(P_XT)nft_chain_nat),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_REDIR_IPV4, $(P_V4)nft_redir_ipv4),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_MASQ, $(P_XT)nft_masq),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT,CONFIG_NFT_MASQ_IPV4, $(P_V4)nft_masq_ipv4),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT6,CONFIG_NFT_REDIR_IPV6, $(P_V6)nft_redir_ipv6),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT6,CONFIG_NFT_CHAIN_NAT_IPV6, $(P_V6)nft_chain_nat_ipv6, lt 5.1),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_NAT6,CONFIG_NFT_MASQ_IPV6, $(P_V6)nft_masq_ipv6),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,NFT_FIB,CONFIG_NFT_FIB, $(P_XT)nft_fib),))

package/kernel/lantiq/ltq-atm/Makefile

@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-atm
-PKG_RELEASE:=2
+PKG_RELEASE:=3
 
 PKG_MAINTAINER:=John Crispin <[email protected]>
 PKG_LICENSE:=GPL-2.0+

package/kernel/lantiq/ltq-atm/src/ltq_atm.c

@@ -289,17 +289,9 @@ static int ppe_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg)
 		return -ENOTTY;
 
 	if ( _IOC_DIR(cmd) & _IOC_READ )
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,0,0)
 		ret = !access_ok(arg, _IOC_SIZE(cmd));
-#else
-		ret = !access_ok(VERIFY_WRITE, arg, _IOC_SIZE(cmd));
-#endif
 	else if ( _IOC_DIR(cmd) & _IOC_WRITE )
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,0,0)
 		ret = !access_ok(arg, _IOC_SIZE(cmd));
-#else
-		ret = !access_ok(VERIFY_READ, arg, _IOC_SIZE(cmd));
-#endif
 	if ( ret )
 		return -EFAULT;
 

package/kernel/linux/modules/crypto.mk

@@ -171,7 +171,7 @@ define KernelPackage/crypto-des
   KCONFIG:=CONFIG_CRYPTO_DES
   FILES:= \
 	$(LINUX_DIR)/crypto/des_generic.ko \
-	$(LINUX_DIR)/lib/crypto/libdes.ko@ge5.4
+	$(LINUX_DIR)/lib/crypto/libdes.ko
   AUTOLOAD:=$(call AutoLoad,09,des_generic)
   $(call AddDepends/crypto)
 endef
@@ -197,7 +197,7 @@ define KernelPackage/crypto-ecdh
   KCONFIG:= CONFIG_CRYPTO_ECDH
   FILES:= \
 	$(LINUX_DIR)/crypto/ecdh_generic.ko \
-	$(LINUX_DIR)/crypto/ecc.ko@ge5.2
+	$(LINUX_DIR)/crypto/ecc.ko
   AUTOLOAD:=$(call AutoLoad,10,ecdh_generic)
   $(call AddDepends/crypto)
 endef
@@ -729,7 +729,7 @@ define KernelPackage/crypto-sha256
 	CONFIG_CRYPTO_SHA256_SSSE3
   FILES:= \
 	$(LINUX_DIR)/crypto/sha256_generic.ko \
-	$(LINUX_DIR)/lib/crypto/libsha256.ko@ge5.4
+	$(LINUX_DIR)/lib/crypto/libsha256.ko
   AUTOLOAD:=$(call AutoLoad,09,sha256_generic)
   $(call AddDepends/crypto)
 endef

package/kernel/linux/modules/fs.mk

@@ -204,7 +204,7 @@ $(eval $(call KernelPackage,fs-ext4))
 define KernelPackage/fs-f2fs
   SUBMENU:=$(FS_MENU)
   TITLE:=F2FS filesystem support
-  DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +!LINUX_4_19:kmod-nls-base
+  DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +kmod-nls-base
   KCONFIG:=CONFIG_F2FS_FS
   FILES:=$(LINUX_DIR)/fs/f2fs/f2fs.ko
   AUTOLOAD:=$(call AutoLoad,30,f2fs,1)

package/kernel/linux/modules/input.mk

@@ -182,7 +182,7 @@ define KernelPackage/input-touchscreen-ads7846
 	CONFIG_TOUCHSCREEN_PROPERTIES=y \
 	CONFIG_TOUCHSCREEN_ADS7846
   FILES:=$(LINUX_DIR)/drivers/input/touchscreen/ads7846.ko \
-	$(LINUX_DIR)/drivers/input/touchscreen/of_touchscreen.ko@ge5.4
+	$(LINUX_DIR)/drivers/input/touchscreen/of_touchscreen.ko
   AUTOLOAD:=$(call AutoProbe,ads7846)
 endef
 

package/kernel/linux/modules/lib.mk

@@ -250,8 +250,7 @@ define KernelPackage/lib-cordic
   SUBMENU:=$(LIB_MENU)
   TITLE:=Cordic function support
   KCONFIG:=CONFIG_CORDIC
-  FILES:=$(LINUX_DIR)/lib/[email protected] \
-	  $(LINUX_DIR)/lib/math/[email protected]
+  FILES:=$(LINUX_DIR)/lib/math/cordic.ko
   AUTOLOAD:=$(call AutoProbe,cordic)
 endef
 

package/kernel/linux/modules/netdevices.mk

@@ -682,7 +682,7 @@ $(eval $(call KernelPackage,igbvf))
 define KernelPackage/ixgbe
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Intel(R) 82598/82599 PCI-Express 10 Gigabit Ethernet support
-  DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
+  DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +kmod-libphy
   KCONFIG:=CONFIG_IXGBE \
     CONFIG_IXGBE_VXLAN=n \
     CONFIG_IXGBE_HWMON=y \
@@ -720,7 +720,7 @@ $(eval $(call KernelPackage,ixgbevf))
 define KernelPackage/i40e
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Intel(R) Ethernet Controller XL710 Family support
-  DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
+  DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +kmod-libphy
   KCONFIG:=CONFIG_I40E \
     CONFIG_I40E_VXLAN=n \
     CONFIG_I40E_HWMON=y \
@@ -744,8 +744,7 @@ define KernelPackage/iavf
        CONFIG_I40EVF \
        CONFIG_IAVF
   FILES:= \
-       $(LINUX_DIR)/drivers/net/ethernet/intel/i40evf/[email protected] \
-       $(LINUX_DIR)/drivers/net/ethernet/intel/iavf/[email protected]
+       $(LINUX_DIR)/drivers/net/ethernet/intel/iavf/iavf.ko
   AUTOLOAD:=$(call AutoProbe,i40evf iavf)
   AUTOLOAD:=$(call AutoProbe,iavf)
 endef
@@ -864,36 +863,6 @@ endef
 $(eval $(call KernelPackage,hfcmulti))
 
 
-define KernelPackage/gigaset
-  SUBMENU:=$(NETWORK_DEVICES_MENU)
-  TITLE:=Siemens Gigaset support for isdn4linux
-  DEPENDS:=@USB_SUPPORT +kmod-isdn4linux +kmod-lib-crc-ccitt +kmod-usb-core @LINUX_4_19
-  URL:=http://gigaset307x.sourceforge.net/
-  KCONFIG:= \
-    CONFIG_ISDN_DRV_GIGASET \
-    CONFIG_GIGASET_BASE \
-    CONFIG_GIGASET_M101 \
-    CONFIG_GIGASET_M105 \
-    CONFIG_GIGASET_UNDOCREQ=y \
-    CONFIG_GIGASET_I4L=y
-  FILES:= \
-    $(LINUX_DIR)/drivers/isdn/gigaset/gigaset.ko \
-    $(LINUX_DIR)/drivers/isdn/gigaset/bas_gigaset.ko \
-    $(LINUX_DIR)/drivers/isdn/gigaset/ser_gigaset.ko \
-    $(LINUX_DIR)/drivers/isdn/gigaset/usb_gigaset.ko
-  AUTOLOAD:=$(call AutoProbe,gigaset bas_gigaset ser_gigaset usb_gigaset)
-endef
-
-define KernelPackage/gigaset/description
- This driver supports the Siemens Gigaset SX205/255 family of
- ISDN DECT bases, including the predecessors Gigaset 3070/3075
- and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
- 721X.
-endef
-
-$(eval $(call KernelPackage,gigaset))
-
-
 define KernelPackage/macvlan
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=MAC-VLAN support
@@ -1223,7 +1192,7 @@ $(eval $(call KernelPackage,sfp))
 define KernelPackage/igc
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Intel(R) Ethernet Controller I225 Series support
-  DEPENDS:=@PCI_SUPPORT @!LINUX_4_19
+  DEPENDS:=@PCI_SUPPORT
   KCONFIG:=CONFIG_IGC
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/intel/igc/igc.ko
   AUTOLOAD:=$(call AutoProbe,igc)

package/kernel/linux/modules/netfilter.mk

@@ -1052,7 +1052,7 @@ $(eval $(call KernelPackage,ipt-rpfilter))
 define KernelPackage/nft-core
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter nf_tables support
-  DEPENDS:=+kmod-nfnetlink +kmod-nf-reject +IPV6:kmod-nf-reject6 +IPV6:kmod-nf-conntrack6 +!LINUX_4_19:kmod-nf-nat
+  DEPENDS:=+kmod-nfnetlink +kmod-nf-reject +IPV6:kmod-nf-reject6 +IPV6:kmod-nf-conntrack6 +kmod-nf-nat
   FILES:=$(foreach mod,$(NFT_CORE-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir $(NFT_CORE-m)))
   KCONFIG:= \

package/kernel/linux/modules/other.mk

@@ -136,21 +136,6 @@ endef
 $(eval $(call KernelPackage,dma-buf))
 
 
-define KernelPackage/nvmem
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Non Volatile Memory support
-  DEPENDS:=@LINUX_4_19
-  KCONFIG:=CONFIG_NVMEM
-  HIDDEN:=1
-  FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko
-endef
-
-define KernelPackage/nvmem/description
-  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
-endef
-
-$(eval $(call KernelPackage,nvmem))
-
 define KernelPackage/eeprom-93cx6
   SUBMENU:=$(OTHER_MENU)
   TITLE:=EEPROM 93CX6 support
@@ -170,7 +155,7 @@ define KernelPackage/eeprom-at24
   SUBMENU:=$(OTHER_MENU)
   TITLE:=EEPROM AT24 support
   KCONFIG:=CONFIG_EEPROM_AT24
-  DEPENDS:=+kmod-i2c-core +LINUX_4_19:kmod-nvmem +kmod-regmap-i2c
+  DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
   FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
   AUTOLOAD:=$(call AutoProbe,at24)
 endef
@@ -186,7 +171,6 @@ define KernelPackage/eeprom-at25
   SUBMENU:=$(OTHER_MENU)
   TITLE:=EEPROM AT25 support
   KCONFIG:=CONFIG_EEPROM_AT25
-  DEPENDS:=+LINUX_4_19:kmod-nvmem
   FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
   AUTOLOAD:=$(call AutoProbe,at25)
 endef
@@ -265,7 +249,7 @@ $(eval $(call KernelPackage,gpio-nxp-74hc164))
 
 define KernelPackage/gpio-pca953x
   SUBMENU:=$(OTHER_MENU)
-  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +!LINUX_4_19:kmod-regmap-i2c
+  DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
   TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
   KCONFIG:=CONFIG_GPIO_PCA953X
   FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
@@ -651,7 +635,7 @@ define KernelPackage/rtc-pcf2123
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Philips PCF2123 RTC support
   DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
-  DEPENDS:=+!LINUX_4_19:kmod-regmap-spi
+  DEPENDS:=+kmod-regmap-spi
   KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
 	CONFIG_RTC_CLASS=y
   FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
@@ -818,7 +802,7 @@ define KernelPackage/serial-8250
 	$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
 	$(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \
 	$(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \
-	$(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko@ge5.3)
+	$(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko)
   AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
 endef
 

package/kernel/linux/modules/sound.mk

@@ -522,7 +522,7 @@ define KernelPackage/sound-hda-intel
 	CONFIG_SND_HDA_INTEL
   FILES:= \
 	$(LINUX_DIR)/sound/pci/hda/snd-hda-intel.ko \
-	$(LINUX_DIR)/sound/hda/snd-intel-nhlt.ko@ge5.4
+	$(LINUX_DIR)/sound/hda/snd-intel-nhlt.ko
   AUTOLOAD:=$(call AutoProbe,snd-hda-intel)
   $(call AddDepends/sound,kmod-sound-hda-core)
 endef

package/kernel/linux/modules/usb.mk

@@ -1569,7 +1569,7 @@ define KernelPackage/usb-chipidea
 	$(LINUX_DIR)/drivers/extcon/extcon-core.ko \
 	$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
 	$(LINUX_DIR)/drivers/usb/common/ulpi.ko \
-	$(LINUX_DIR)/drivers/usb/roles/roles.ko@ge5.0
+	$(LINUX_DIR)/drivers/usb/roles/roles.ko
   AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
   $(call AddDepends/usb)
 endef

package/kernel/linux/modules/video.mk

@@ -284,8 +284,7 @@ define KernelPackage/drm-amdgpu
 	CONFIG_DRM_AMD_DC=y \
 	CONFIG_DEBUG_KERNEL_DC=n
   FILES:=$(LINUX_DIR)/drivers/gpu/drm/amd/amdgpu/amdgpu.ko \
-	$(LINUX_DIR)/drivers/gpu/drm/scheduler/gpu-sched.ko \
-	$(LINUX_DIR)/drivers/gpu/drm/amd/lib/[email protected]
+	$(LINUX_DIR)/drivers/gpu/drm/scheduler/gpu-sched.ko
   AUTOLOAD:=$(call AutoProbe,amdgpu)
 endef
 
@@ -407,7 +406,6 @@ define KernelPackage/video-core
 	CONFIG_V4L_PLATFORM_DRIVERS=y \
 	CONFIG_V4L_ISA_PARPORT_DRIVERS=y
   FILES:= \
-	$(LINUX_DIR)/drivers/media/$(V4L2_DIR)/[email protected] \
 	$(LINUX_DIR)/drivers/media/$(V4L2_DIR)/videodev.ko
   AUTOLOAD:=$(call AutoLoad,60, videodev v4l2-common)
 endef