ath79: enable gpio on ar933x by default

All other SoC DTSI files have gpio enabled by default, only
ar9330/ar9331 disable it by default, only to have it enabled again
afterwards for each individual device.

So, do not disable it in the first place, and drop all device-specific
status statements afterwards.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/dts/ar9330.dtsi

@@ -57,8 +57,6 @@
 
 				interrupt-controller;
 				#interrupt-cells = <2>;
-
-				status = "disabled";
 			};
 
 			pinmux: pinmux@18040028 {

target/linux/ath79/dts/ar9330_dlink_dir-505.dts

@@ -56,8 +56,6 @@
 };
 
 &gpio {
-	status = "okay";
-
 	led_enable {
 		gpio-hog;
 		output-low;

target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts

@@ -67,10 +67,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	dr_mode = "host";
 	status = "okay";

target/linux/ath79/dts/ar9330_pqi_air-pen.dts

@@ -55,10 +55,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	dr_mode = "host";
 	status = "okay";

target/linux/ath79/dts/ar9331_8dev_carambola2.dts

@@ -54,10 +54,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	dr_mode = "host";
 	status = "okay";

target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts

@@ -73,10 +73,6 @@
 	compatible = "syscon", "simple-mfd";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &spi {
 	status = "okay";
 

target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts

@@ -48,10 +48,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	dr_mode = "host";
 	status = "okay";

target/linux/ath79/dts/ar9331_etactica_eg200.dts

@@ -58,10 +58,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	dr_mode = "host";
 	status = "okay";

target/linux/ath79/dts/ar9331_glinet_64xx.dtsi

@@ -65,10 +65,6 @@
 	mtd-mac-address = <&uboot 0x1fc00>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9331_pisen_ts-d084.dts

@@ -92,10 +92,6 @@
 	compatible = "syscon", "simple-mfd";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9331_pisen_wmm003n.dts

@@ -101,10 +101,6 @@
 	compatible = "syscon", "simple-mfd";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts

@@ -91,10 +91,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	#address-cells = <1>;
 	#size-cells = <0>;

target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts

@@ -87,10 +87,6 @@
 	status = "okay";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &usb {
 	#address-cells = <1>;
 	#size-cells = <0>;

target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi

@@ -99,10 +99,6 @@
 	compatible = "syscon", "simple-mfd";
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts

@@ -104,10 +104,6 @@
 	mtd-mac-address-increment = <(-1)>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };

target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi

@@ -142,10 +142,6 @@
 	mtd-mac-address-increment = <(-1)>;
 };
 
-&gpio {
-	status = "okay";
-};
-
 &uart {
 	status = "okay";
 };