OpenWrt/openwrt @ 01696b71cc6da50897d4ed7ff5b6f782b5e76571

No Description

Florian Fainelli 01696b71cc Replace hardcoded values with their correct definitions		18 years ago
docs	a925fec9c7 fix docs compile targets	18 years ago
include	f59b6f6089 Fix the tgz image build	18 years ago
package	650ee7c337 libgcc is not available with host-toolchain, DEPENDS was overriden with the avr32 condition	18 years ago
scripts	19a52ea35d Add a USES_TGZ config.in variable, so that RB1xx profiles can use it	18 years ago
target	01696b71cc Replace hardcoded values with their correct definitions	18 years ago
toolchain	c844236c36 fix cflags for xscale (#2026)	18 years ago
tools	114632438a Remove patch-cmdline from the packages and move it tools tools/. adm5120 and rb532 do use it for procuding ready-to-use kernels (#1631)	18 years ago
.gitignore	2cccffcba8 make top-level .gitignore only apply to top-level files/directories (#1960)	18 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	19a52ea35d Add a USES_TGZ config.in variable, so that RB1xx profiles can use it	18 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	6178152ee8 add kernel_oldconfig target	18 years ago
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 years ago
rules.mk	4b0c035a93 don't include .config if DUMP is set	18 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org