OpenWrt/openwrt @ 069dbf6fd412aa01e384c8ca5fd2b51306a51412

説明なし

Felix Fietkau 069dbf6fd4 ucitrigger: add options to force enable/disable specific triggers		16 年前
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 年前
include	1981fd14a7 bump to 2.6.29.6 and refresh patches	16 年前
package	069dbf6fd4 ucitrigger: add options to force enable/disable specific triggers	16 年前
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 年前
target	de45798d41 Add config file for 2.6.31 kernels in preparation for 2.6.31	16 年前
toolchain	f3822efd8e install headers, fix foxboard-utils	16 年前
tools	9e94806990 fix segfault when using the maxlen argument (#4359)	16 年前
.gitignore	13189afcc9 add logs/ to .gitignore	17 年前
BSDmakefile	f30058fda2 add missing copyright header	19 年前
Config.in	1b216aa20a Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	17 年前
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 年前
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 年前
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 年前
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 年前
rules.mk	ebeb3829e1 Set TARGET_CXX to 'no' if c++ is not enabled in the toolchain.	17 年前

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org