OpenWrt/openwrt @ 0f18ecf43ef6c42d4be8253cd09f381ccfcb154d

Нема описа

Gabor Juhos 0f18ecf43e refresh 2.6.23 patches		пре 17 година
docs	4b5488ebfa Add 802.1x client configuration support and corresponding documentation (#2069)	пре 17 година
include	5cf0db54c6 Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)	пре 17 година
package	58fb9f67ec move qc-usb from trunk to packages as well (see [12260])	пре 17 година
scripts	067a1fe3b6 scripts/feeds calls 'make' irrespective of the platform it is running on. The attached patch changes the code to use gmake if available (which should cover non-linux platforms, and is the same logic used to adapt other programs in include/host.mk) (#3867)	пре 17 година
target	0f18ecf43e refresh 2.6.23 patches	пре 17 година
toolchain	0f61e46c1a storm is ARMv4, not ARMv4T (thx, SeG)	пре 17 година
tools	80e83652ae Invert logic, first search for find as most people will build under Linux	пре 17 година
.gitignore	cc357e82e2 add missing gitignore change for build environments	пре 17 година
BSDmakefile	f30058fda2 add missing copyright header	пре 19 година
Config.in	c9d9f8045c adds missing patch for native toolchain	пре 18 година
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	пре 10 година
Makefile	1b838dbd95 make package prereq checks behave more like build prereq checks (first check all, then fail if necessary), also make them less verbose	пре 17 година
README	6f4854e5e5 add information about the tex4ht requirement for the docs	пре 19 година
feeds.conf	34a16898a1 update luci feed url to use http due to certificate issues	пре 17 година
rules.mk	14ac8769b2 add a variable that contains the proper architecture-dependent -fPIC/-fpic cflag for building shared libraries	пре 17 година

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org