| 123456789101112131415161718192021222324252627282930313233343536 |
- From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001
- From: Robert Marko <[email protected]>
- Date: Thu, 15 Aug 2019 19:28:23 +0200
- Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node
- IPQ4019 has a built in SD/eMMC controller which is supported by the
- SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
- So lets add the appropriate node for it.
- Signed-off-by: Robert Marko <[email protected]>
- Signed-off-by: Bjorn Andersson <[email protected]>
- ---
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
- --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
- +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
- @@ -206,6 +206,18 @@
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- + sdhci: sdhci@7824900 {
- + compatible = "qcom,sdhci-msm-v4";
- + reg = <0x7824900 0x11c>, <0x7824000 0x800>;
- + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- + interrupt-names = "hc_irq", "pwr_irq";
- + bus-width = <8>;
- + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
- + <&gcc GCC_DCD_XO_CLK>;
- + clock-names = "core", "iface", "xo";
- + status = "disabled";
- + };
- +
- blsp_dma: dma@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
|
