Maxim Anisimov
161a3be5ad
ramips: add support for TP-Link Archer C20 v1
|
8 سال پیش | |
|---|---|---|
| .github | 8 سال پیش | |
| config | 8 سال پیش | |
| include | 8 سال پیش | |
| package | 8 سال پیش | |
| scripts | 8 سال پیش | |
| target | 8 سال پیش | |
| toolchain | 8 سال پیش | |
| tools | 8 سال پیش | |
| .gitattributes | 13 سال پیش | |
| .gitignore | 9 سال پیش | |
| BSDmakefile | 19 سال پیش | |
| Config.in | 9 سال پیش | |
| LICENSE | 9 سال پیش | |
| Makefile | 8 سال پیش | |
| README | 9 سال پیش | |
| feeds.conf.default | 9 سال پیش | |
| rules.mk | 8 سال پیش |
README
This is the buildsystem for the LEDE Linux distribution.
Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.
You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.
Use "make menuconfig" to configure your image.
Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
Sunshine!
Your LEDE Community
http://www.lede-project.org
Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.
You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.
Use "make menuconfig" to configure your image.
Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
Sunshine!
Your LEDE Community
http://www.lede-project.org