OpenWrt/openwrt @ 1afc0de6d39439d3ecc17e8c003452da13ee60f1

Aucune description

Michael Büsch 1afc0de6d3 ucmb: Put the lowlevel protocol handling into the kernel.		il y a 17 ans
docs	91f7c80407 wireless.tex: update docs to reflect txpower move	il y a 17 ans
include	47665da430 update to 2.6.27.17	il y a 17 ans
package	1afc0de6d3 ucmb: Put the lowlevel protocol handling into the kernel.	il y a 17 ans
scripts	8a253e1ac1 adam2flash: fix 'Interrupted system call' error when flashing (closes: #4490, thanks oliver)	il y a 17 ans
target	d8ab910fdc Fix spi-gpio MISO handling.	il y a 17 ans
toolchain	152887e424 fix gcc 4.3.x segfault triggered by using -frename-registers (reproduced on arm, might be relevant for other platforms as well)	il y a 17 ans
tools	03f3002a17 firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device	il y a 17 ans
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	il y a 17 ans
BSDmakefile	f30058fda2 add missing copyright header	il y a 19 ans
Config.in	24f02449ff Add menuconfig option for enabling profiling in the kernel.	il y a 17 ans
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	il y a 9 ans
Makefile	71e8b3c4f7 remove toolchain build directory as well in 'make dirclean'	il y a 17 ans
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	il y a 17 ans
feeds.conf.default	b1af9ddb54 Add desktop and xfce feed to feeds.conf.default	il y a 17 ans
rules.mk	db059cc0ff remove LINUX_HEADERS_DIR, not used anymore	il y a 17 ans

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org