OpenWrt/openwrt @ 22dfa7ae22c4c5eef2cd08e2c0e76ada5bf7fca8

Нет описания

11994 Коммиты

Andy Boyett 22dfa7ae22 refresh patches		16 лет назад
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 лет назад
include	3ce53b8d92 update to 2.6.30.6, compile tested on some targets only	16 лет назад
package	d71228f092 madwifi: replace an implicit memcpy with an explicit one (cosmetic fix)	16 лет назад
scripts	caf8074566 scripts/feeds: fix an error message	16 лет назад
target	22dfa7ae22 refresh patches	16 лет назад
toolchain	f69f5f0b38 fix wrong description for CONFIG_SSP	16 лет назад
tools	f32f0814b1 firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash	16 лет назад
.gitignore	13189afcc9 add logs/ to .gitignore	16 лет назад
BSDmakefile	f30058fda2 add missing copyright header	19 лет назад
Config.in	f7033929fa add menuconfig option for enabling debugfs support in the kernel	16 лет назад
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 лет назад
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 лет назад
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 лет назад
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 лет назад
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 лет назад

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org