OpenWrt/openwrt @ 24d4b8f31a9c168eabb089a0ac44e0697eeb7545

Ei kuvausta

Vasilis Tsiligiannis 24d4b8f31a quagga-unstable: Delete AS_CONFED_SEQUENCE when prepending an AS_SEQUENCE type segment		16 vuotta sitten
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 vuotta sitten
include	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 vuotta sitten
package	24d4b8f31a quagga-unstable: Delete AS_CONFED_SEQUENCE when prepending an AS_SEQUENCE type segment	16 vuotta sitten
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 vuotta sitten
target	5f2d2695d9 enable sysupgrade support for the TL-WR741ND	16 vuotta sitten
toolchain	c8f178d61a binutils: use 2.19.1 for ppc40x by default	16 vuotta sitten
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 vuotta sitten
.gitignore	13189afcc9 add logs/ to .gitignore	16 vuotta sitten
BSDmakefile	f30058fda2 add missing copyright header	19 vuotta sitten
Config.in	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 vuotta sitten
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 vuotta sitten
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 vuotta sitten
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 vuotta sitten
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 vuotta sitten
rules.mk	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 vuotta sitten

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org