OpenWrt/openwrt @ 27915ac778c7b142a5fe9a8db977e2d89706d3f2

Нема описа

11969 Комити

Travis Kemen 27915ac778 fix nonhotpluggable networks not being brought up. Closes #2781		пре 16 година
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	пре 16 година
include	c4b197737e do not fail on empty packages	пре 16 година
package	27915ac778 fix nonhotpluggable networks not being brought up. Closes #2781	пре 16 година
scripts	caf8074566 scripts/feeds: fix an error message	пре 16 година
target	65fa1debda add infrastructure to register gpio-input reset button	пре 16 година
toolchain	91fe363562 uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	пре 16 година
tools	8868aa88c8 build fixes for squashfs4 on cygwin	пре 16 година
.gitignore	13189afcc9 add logs/ to .gitignore	пре 16 година
BSDmakefile	f30058fda2 add missing copyright header	пре 19 година
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	пре 16 година
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	пре 9 година
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	пре 16 година
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	пре 17 година
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	пре 16 година
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	пре 16 година

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org