OpenWrt/openwrt @ 27da9d1984e2c7eb45d00cb288b6063a8ff47170

暂无描述

Jo-Philipp Wich 27da9d1984 base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured (#5356)		16 年之前
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 年之前
include	bb5a40c64b add an optional config option for stripping all unnecessary symbol exports from the kernel image	16 年之前
package	27da9d1984 base-files: move ipv6 module loading from setup_interface() to addif() in the hotplug call, this ensures that ipv6 is loaded before any interfaces or aliases with ip6addr option are configured (#5356)	16 年之前
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 年之前
target	bad105e7c8 arm: when linking the kernel, move the section discards after the other sections to fix discarding unused symbol exports	16 年之前
toolchain	5a8a22bdc2 add gcc 4.3.4	16 年之前
tools	85698765da add support for the Pirelli AG226G board (#5337)	16 年之前
.gitignore	13189afcc9 add logs/ to .gitignore	16 年之前
BSDmakefile	f30058fda2 add missing copyright header	19 年之前
Config.in	bb5a40c64b add an optional config option for stripping all unnecessary symbol exports from the kernel image	16 年之前
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 年之前
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 年之前
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 年之前
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 年之前
rules.mk	4169a2e834 add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later	16 年之前

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org