OpenWrt/openwrt @ 2c6b679ceb76bce4e7192aedb5de7d1d31a4f15f

Brak opisu

Florian Fainelli 2c6b679ceb Update b43 to work in AP mode		17 lat temu
docs	4b5488ebfa Add 802.1x client configuration support and corresponding documentation (#2069)	17 lat temu
include	5cf0db54c6 Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)	17 lat temu
package	2c6b679ceb Update b43 to work in AP mode	17 lat temu
scripts	067a1fe3b6 scripts/feeds calls 'make' irrespective of the platform it is running on. The attached patch changes the code to use gmake if available (which should cover non-linux platforms, and is the same logic used to adapt other programs in include/host.mk) (#3867)	17 lat temu
target	904effc167 fix gpio number of the reset button Compex WP54 boards	17 lat temu
toolchain	0f61e46c1a storm is ARMv4, not ARMv4T (thx, SeG)	17 lat temu
tools	80e83652ae Invert logic, first search for find as most people will build under Linux	17 lat temu
.gitignore	cc357e82e2 add missing gitignore change for build environments	17 lat temu
BSDmakefile	f30058fda2 add missing copyright header	19 lat temu
Config.in	c9d9f8045c adds missing patch for native toolchain	17 lat temu
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 lat temu
Makefile	1b838dbd95 make package prereq checks behave more like build prereq checks (first check all, then fail if necessary), also make them less verbose	17 lat temu
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 lat temu
feeds.conf	34a16898a1 update luci feed url to use http due to certificate issues	17 lat temu
rules.mk	14ac8769b2 add a variable that contains the proper architecture-dependent -fPIC/-fpic cflag for building shared libraries	17 lat temu

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org