2
0

Тайлбар байхгүй

Geoff Levand 2d3e7d7eee PS3: Enable kernel patches 16 жил өмнө
docs 254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 16 жил өмнө
include 1981fd14a7 bump to 2.6.29.6 and refresh patches 16 жил өмнө
package 03db00a803 package/lua: implement memory limits, scripts can use get_memory_limit() and set_memory_limit() to cap the maximum ram usage 16 жил өмнө
scripts 4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 17 жил өмнө
target 2d3e7d7eee PS3: Enable kernel patches 16 жил өмнө
toolchain c8d103a660 uClibc: fix build error on ARM targets (closes #5473) 16 жил өмнө
tools db71f38ed6 firmware-utils/mktplinkfw: add option for combined images 16 жил өмнө
.gitignore 13189afcc9 add logs/ to .gitignore 17 жил өмнө
BSDmakefile f30058fda2 add missing copyright header 19 жил өмнө
Config.in 4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip) 16 жил өмнө
LICENSE 60c1f0f64d finally move buildroot-ng to trunk 10 жил өмнө
Makefile 61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 17 жил өмнө
README adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 17 жил өмнө
feeds.conf.default aaa0278c46 switch to LuCI 0.9.x branch 17 жил өмнө
rules.mk 4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip) 16 жил өмнө

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org