openwrt/target/linux/bcm53xx/patches-5.15/031-v5.17-0003-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch

From b6c99228c8edc5e67d8229ba1c5f76cce210ddfc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <[email protected]>
Date: Wed, 27 Oct 2021 00:57:06 +0800
Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.

Signed-off-by: Arınç ÜNAL <[email protected]>
Acked-by: Alvin Šipraga <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
---
 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 ++++++++++++++++++++
 1 file changed, 77 insertions(+)

--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,83 @@
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
 };
 
 &srab {